SEARCH · Engineering Papers

Results for “model testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Static penetration resistance of soils

Model test results were used to define the failure mechanism associated with the static penetration resistance of cohesionless and low-cohesion soils. Knowledge of this mechanism has permitted the development of a new analytical method for calculating the ultimate penetration resistance which explicitly accounts for penetrometer base apex angle and roughness, soil friction angle, and the ratio of penetration depth to base width. Curves relating the bearing capacity factors to the soil friction angle are presented for failure in general shear. Strength parameters and penetrometer interaction properties of a fine sand were determined and used as the basis for prediction of the penetration resistance encountered by wedge, cone, and flat-ended penetrometers of different surface roughness using the proposed analytical method. Because of the close agreement between predicted values and values measured in laboratory tests, it appears possible to deduce in-situ soil strength parameters and their variation with depth from the results of static penetration tests.

Durgunoglu, H. T.↗

NASA NTRS1973

Ocean recovery of Shuttle Solid Rocket Boosters.

Cost effective recovery of the expended Space-Shuttle Solid Rocket Boosters (SRB) from the ocean will result in significant overall cost savings to the Space Shuttle Program. The ocean recovery mission begins with the dispatching of the recovery team to the predicted splashdown area. The SRBs, drogue parachutes and main parachutes must be tracked, located, retrieved, and transported to land where they will be refurbished and recycled for reuse. Trade studies to be conducted will consider the recovery mission requirements and weigh the advantages, disadvantages and costs of various candidate recovery systems. Major parameters effecting the selection of the final system will ensure that the system will meet overall objectives. Large- and small-scale SRB model testing has been conducted to establish characteristics of SRBs during water entry, floating free and under tow.

Junker, L. J.↗

NASA NTRS1973

Application of compressibility correction to calculation of flow in inlets.

An application of the compressibility correction developed by Lieblein and Stockman (1972) to the calculation of flow in axisymmetric inlets is described. The results with experimental data from wind tunnel model tests are compared. The configuration is a conventional subsonic inlet with a NACA series one external cowl shape and a two-to-one ellipse internal lip. It is shown that the compressibility correction gives a relatively good approximation to the internal compressible flow behavior, and thus should be useful in the design and analysis of engine nacelle inlets.

Albers, J. A.↗

NASA NTRS1974

Extraction from flight data of longitudinal aerodynamic coefficients for F-8 aircraft with supercritical wing

The longitudinal aerodynamic derivatives of the F-8 aircraft with supercritical wing were obtained from flight data by a parameter-extraction algorithm at Mach numbers of 0.8, 0.9, and 0.98. A set of derivatives were obtained from which calculated aircraft responses were correlated almost identically with actual flight responses. In general, the trends of the extracted derivatives obtained by the algorithm agreed with those obtained by a Newton-Raphson method and with preliminary data from the Langley 8-foot transonic pressure tunnel. The wind-tunnel damping derivatives were, however, substantially higher than the converged damping derivatives possibly because of Reynolds number differences between flight and model tests.

Williams, J. L.↗

NASA NTRS1973

Space vehicle engine and heat shield environment review. Volume 1: Engineering analysis

Methods for predicting the base heating characteristics of a multiple rocket engine installation are discussed. The environmental data is applied to the design of adequate protection system for the engine components. The methods for predicting the base region thermal environment are categorized as: (1) scale model testing, (2) extrapolation of previous and related flight test results, and (3) semiempirical analytical techniques.

Mcanelly, W. B.↗

NASA NTRS1974

Space shuttle SRM interim contract, part 1

Essential studies and analyses required to integrate the SRM into the booster and overall space shuttle system. Emphasis was placed on the case, nozzle, insulation, and propellant components with resulting performance, weight, and structural load characteristics being generated. Effort conducted during the time period of this contract included studies, analyses, planning, and preliminary design activities. Technical requirements identified in the SRM Project Request for Proposal No. 8-1-4-94-98401 and Thiokol's proposed SRM design (designated Configuration 0) established the basis for this effort. The requirements were evaluated jointly with MSFC and altered where necessary to incorporate new information that evolved after issuance of the RFP and during the course of this interim contract. Revised water impact loads and load distributions were provided based on additional model test data and analytical effort conducted by NASA subsequent to the RFP release. Launch pad peaking loads into the SRM aft skirt were provided which also represented a change from RFP requirements. A modified SRM/External Tank (ET) attachment configuration with new structural load data was supplied by NASA, and direction was received to include a 2 percent inert weight contingency.

Source record↗

NASA NTRS1973

Computer model of cardiovascular control system responses to exercise

Approaches of systems analysis and mathematical modeling together with computer simulation techniques are applied to the cardiovascular system in order to simulate dynamic responses of the system to a range of exercise work loads. A block diagram of the circulatory model is presented, taking into account arterial segments, venous segments, arterio-venous circulation branches, and the heart. A cardiovascular control system model is also discussed together with model test results.

Croston, R. C.↗

NASA NTRS1973

Sea level side loads in high-area-ratio rocket engines

An empirical separation and side load model to obtain applied aerodynamic loads has been developed based on data obtained from full-scale J-2S (265K-pound-thrust engine with an area ratio of 40:1) engine and model testing. Experimental data include visual observations of the separation patterns that show the dynamic nature of the separation phenomenon. Comparisons between measured and applied side loads are made. Correlations relating the separation location to the applied side loads and the methods used to determine the separation location are given.

Nave, L. H.↗

NASA NTRS1973

Hingeless rotor vibration and loads at high advance ratio

Experimental values of mean and oscillatory shaft force aeroelastic derivatives with respect to cyclic pitch are presented in dimensionless coefficient form for stiff-bladed hingeless rotors operating at high advance ratio. Good agreement with theory is obtained for the 2P components, in rotating axes, of the oscillatory hub moment derivatives. Trends were predicted for the mean components. Experimental plots of the azimuthal distribution of blade flap bending moment due to cyclic pitch are compared with theoretical for high values of flap frequency ratio and advance ratio. Good agreement is found near the blade root. The similarity parameters that should be preserved in the scale model testing of stiff-bladed hingeless rotors at high advance ratio are reviewed, and some aspects of hingeless rotor wind tunnel testing are considered.

Watts, G. A.↗

NASA NTRS1974

Shock shapes of blunt bodies in hypersonic helium, air, and CO2 flows

A primary factor governing hypersonic flowfield characteristics of blunt vehicles entering planetary atmospheres is the normal shock density ratio. Hence, a means of duplicating or simulating the high density ratios experienced during planetary entry is needed. One facility having the capability of generating a range of hypersonic-hypervelocity flow conditions in arbitrary test gases is the expansion tube. Preliminary shock shape results obtained in the Langley 6-in. expansion tube at hypersonic conditions are presented. Normal shock density ratios from approximately 4 to 19 were generated using helium, air, and CO2 test gases at freestream velocities from 5 to 7 km/sec. Test models were a flat-faced cylinder and the Viking aeroshell.

Miller, C. G.↗

NASA NTRS1974

Development of the Viking Mars lander thermal control subsystem design

Two Viking spacecraft, each consisting of a lander capsule coupled to an orbiter, will be launched toward Mars during the summer of 1975. About a year later, the orbiters will go into orbit around Mars and the landers will descend to the surface for 90-day landed missions. The lander must withstand a wide variety of environmental and operational conditions during all phases of the mission, including prelaunch sterilization. On the surface of Mars, the lander internal temperatures must be controlled under widely varying thermal environments and atmospheric conditions. The lander thermal design is based on the maximum use of passive techniques and is integrated into the overall vehicle design and operation. The solutions to the unusual combinations of design problems and a summary of the results of full scale model testing under simulated mission conditions are presented.

Morey, T. F.↗

NASA NTRS1974

Performance of an inlet for an integrated scramjet concept

Review of the results of an experimental investigation of the performance of an inlet for an integrated scramjet engine concept at Mach 6. Following a description of the inlet design and test model, the Mach 6 experimental results obtained are presented in terms of integrated performance parameters.

Trexler, C. A.↗

NASA NTRS1974

The prediction of structural response to buffet flow: A state-of-the-art review

Certain aspects of the dynamic system being discussed are reviewed and important structural and aerodynamic quantities of the system are discussed. A theoretical model is presented which relates these quantities to each other. These quantities are then each, in turn, considered in terms of the state of the art of determining the quantities and in terms of areas where further research is needed. The similarity laws and scaling relationships applicable to determining buffet structural response are then discussed, and areas where simplification is required or may be permissible are mentioned. Finally, the various types of model tests pertinent to predicting response of the aircraft structure to buffet flow are discussed.

Hanson, P. W.↗

NASA NTRS1974

A new technique for inducing a turbulent boundary layer in a supersonic flow

The feasibility of using slot injection to establish a turbulent boundary layer corresponding to a known Reynolds number was investigated. The basic concept consists of injecting secondary air through a slot. The air is injected at the same local static pressure at a selected stagnation temperature to simulate a given up-stream heat conduction. The mass of the injected air is controlled to match a desired Reynolds number. Secondary air was injected through a supersonic nozzle over a flat plate model. Tests were conducted with different injection air conditions. Heat transfer rates were measured behind the slot and results were compared with theoretical estimates. Static pressure measurements were made over the surface in the streamwise direction. Velocity and Mach number profiles were determined downstream of the slot. Laminar and turbulent profiles were calculated to compare with the results of measurements. Experimental results indicate that this is an effective method for establishing a turbulent boundary layer having a prescribed value of R sub e Theta.

Miyazawa, M.↗

NASA NTRS1974

Shuttle extravehicular activity signal processor pulse amplitude modulation decommutator

To provide data with long-term stability and accuracy, the pulse amplitude modulation (PAM) decommutator was synchronized to the PAM-return to zero wavetrain, and each channel was sampled with a common sample and hold circuit and digitized sequentially. The digital value of each channel was then scaled by the digital value of the calibration channels. The corrected digital value of each channel was stored for one complete frame and then transferred to the multiplexer-demultiplexer at a high rate in one block of serial digital data. A test model was built to demonstrate this design approach taken for the PAM decom and performance data was provided. The accuracies obtained with various signal to noise ratios are shown.

Noble, D. E.↗

NASA NTRS1974

High-temperature earth-storable propellant acoustic cavity technology

Design criteria, methods and data, were developed to permit effective design of acoustic cavities for use in regeneratively cooled OME-type engines. This information was developed experimentally from two series of motor firings with high-temperature fuel during which the engine stability was evaluated under various conditions and with various cavity configurations. Supplementary analyses and acoustic model testing were used to aid cavity design and interpretation of results. Results from this program clearly indicate that dynamic stability in regeneratively cooled OME-type engines can be ensured through the use of acoustic cavities. Moreover, multiple modes of instability were successfully suppressed with the cavity.

Oberg, C. L.↗

NASA NTRS1975

Composite reinforced propellant tanks

Design studies involving weight and cost were carried out for several structural concepts applicable to space shuttle disposable tankage. An effective design, a honeycomb stabilized pressure vessel, was chosen. A test model was designed and fabricated.

Brown, L. D.↗

NASA NTRS1975

Effect of entry-lip design on aerodynamics and acoustics of high throat Mach number inlets for the quiet, clean, short-haul experimental engine

Results of scale model tests of high-throat-Mach-number inlets designed to suppress inlet-emitted engine machinery noise produced in a V/STOL wind tunnel are presented. A vacuum system was used to induce inlet airflow with a siren as a noise source. Inlet mass flow was 11.68 kilograms (25.75 lb. min) per second at a throat Mach number of 0.79. The effect of entry-lip design (contraction ratio and diameter ratio) on inlet total-pressure recovery, steady-state pressure distortion, performance at high incidence angles, and noise suppression was determined. With proper entry-lip design, total-pressure recovery in excess of 0.988 could be obtained statically at an average throat Mach number of 0.79. Total-pressure distortion was 5 percent. The reduction in the siren tone sound pressure level transmitted through the inlet was 10 to 14 db relative to that measured at throat Mach 0.6.

Miller, B. A.↗