Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Fluctuation Effects on the Brush Structure of Mixed Brush Nanoparticles in Solution

A potentially attractive way to control nanoparticle assembly is to graft one or more polymers on the nanoparticle, to control the nanoparticle–nanoparticle interactions. When two immiscible polymers are grafted on the nanoparticle, they can microphase separate to form domains at the nanoparticle surface. Here, we computationally investigate the phase behavior of such binary mixed brush nanoparticles in solution, across a large and experimentally relevant parameter space. Specifically, we calculate the mean-field phase diagram, assuming uniform grafting of the two polymers, as a function of the nanoparticle size relative to the length of the grafted chains, the grafting density, the enthalpic repulsion between the grafted chains, and the solvent quality. We find a variety of phases including a Janus phase and phases with varying numbers of striped domains. Using a nonuniform, random distribution of grafting sites on the nanoparticle instead of the uniform distribution leads to the development of defects in the mixed brush structures. Introducing fluctuations as well leads to increasingly defective structures for the striped phases. Furthermore, we find that the simple Janus phase is preserved in all calculations, even with the introduction of nonuniform grafting and fluctuations. We conclude that the formation of the Janus phase is more realistic experimentally than is the formation of defect-free multivalent mixed brush nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure Control of a π-Conjugated Oligothiophene-Based Liquid Crystal for Enhanced Mixed Ion/Electron Transport Characteristics

Developing soft materials with both ion and electron transport functionalities is of broad interest for energy-storage and bioelectronics applications. Rational design of these materials requires a fundamental understanding of interactions between ion and electron conducting blocks along with the correlation between the microstructure and the conduction characteristics. Here, we investigate the structure and mixed ionic/electronic conduction in thin films of a liquid crystal (LC) 4T/PEO4, which consists of an electronically conducting quarterthiophene (4T) block terminated at both ends by ionically conducting oligoethylenoxide (PEO4) blocks. Using a combined experimental and simulation approach, 4T/PEO4 is shown to self-assemble into smectic, ordered, or disordered phases upon blending the materials with the ionic dopant bis(trifluoromethane)sulfonimide lithium (LiTFSI) under different LiTFSI concentrations. Interestingly, at intermediate LiTFSI concentration, ordered 4T/PEO4 exhibits an electronic conductivity as high as 3.1 × 10 –3 S/cm upon being infiltrated with vapor of the 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) molecular dopant while still maintaining its ionic conducting functionality. This electronic conductivity is superior by an order of magnitude to the previously reported electronic conductivity of vapor co-deposited 4T/F4TCNQ blends. Furthermore, our findings demonstrate that structure and electronic transport in mixed conduction materials could be modulated by the presence of the ion transporting component and will have important implications for other more complex mixed ionic/electronic conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vapor-Phase Stabilization of Biomass Pyrolysis Vapors Using Mixed-Metal Oxide Catalysts

Mixed-metal oxides possess a wide range of tunability and show promise for catalytic stabilization of biomass pyrolysis products. For materials derived from layered double hydroxides, understanding the effect of divalent cation species and divalent/trivalent cation stoichiometric ratio on catalytic behavior is critical to their successful implementation. In this study, four mixed-metal oxide catalysts consisting of Al, Zn, and Mg in different stoichiometric ratios were synthesized and tested for ex-situ catalytic fast pyrolysis (CFP) using pine wood as feedstock. The catalytic activity and deactivation behavior of these catalysts were monitored in real-time using a lab-scale pyrolysis reactor and fixed catalyst bed coupled with a molecular beam mass spectrometer (MBMS), and data were analyzed by multivariate statistical approaches. In the comparison between Mg-Al and Zn-Al catalyst materials, we demonstrated that the Mg-Al materials possessed greater quantities of basic sites, which we attributed to their higher surface areas, and they produced upgraded pyrolysis vapors which contained less acids and more deoxygenated aromatic hydrocarbons such as toluene and xylene. However, detrimental impacts on carbon yields were realized via decarbonylation and decarboxylation reactions and coke formation. Given that the primary goals of catalytic upgrading of bio-oil are deoxygenation, reduction of acidity, and high carbon yield, these results highlight both promising catalytic effects of mixed-metal oxide materials and opportunities for improvement.

09 BIOMASS FUELS↗

Pore-Scale Study of Transverse Mixing Induced CaCO 3 Precipitation and Permeability Reduction in a Model Subsurface Sedimentary System

A microfluidic pore structure etched into a silicon wafer was used as a two-dimensional model subsurface sedimentary system (i.e., a micromodel) to study mineral precipitation and permeability reduction relevant to groundwater remediation and geological carbon sequestration. Solutions containing CaCl 2 and Na 2 CO 3 at four different saturation states (Ω = [Ca 2+ ] [CO 32- ] / KspCaCO 3 ) were introduced through two separate inlets and they mixed by diffusion transverse to the main flow direction along the center of the micromodel resulting in CaCO 3 precipitation. Precipitation rates increased and the total amount of precipitates decreased with increasing saturation state, and only vaterite and calcite crystals were formed (no aragonite). The relative amount of vaterite increased from 80% at the lowest saturation (Ω v = 2.8 for vaterite) state to 95% at the highest saturation state (Ω v = 4.5). Fluorescent tracer tests conducted before and after CaCO 3 precipitation indicate that pore spaces were completely occluded by CaCO 3 precipitates along the transverse mixing zone, thus significantly reducing porosity and permeability, and potentially limiting transformation from vaterite to the more stable calcite. The results suggest that mineral precipitation along plume margins can decrease both reactant mixing during groundwater remediation, and injection and storage efficiency during CO 2 sequestration.

58 GEOSCIENCES↗

Dust Radiative Effects on Climate by Glaciating Mixed-Phase Clouds

Mineral dust plays an important role in the primary formation of ice crystals in mixed-phase clouds by acting as ice nucleating particles (INPs). It can influence the cloud phase transition and radiative forcing of mixed-phase clouds, both of which are crucial to global energy budget and climate. In this study, we investigate the dust indirect effects on mixed-phase clouds through heterogeneous ice nucleation with the U.S. Department of Energy (DOE) Energy Exascale Earth System Model (E3SM). Dust and INP concentrations simulated from two versions of E3SM with three ice nucleation parameterizations were evaluated against observations in the Northern Hemisphere. Constrained by these observations, E3SM shows that dust INPs induce a global mean net cloud radiative effect of 0.05 to 0.26 W/m 2 with the predominant warming appearing in the Northern Hemisphere midlatitudes. However, a cooling effect is found in the Arctic due to reduced longwave cloud forcing.

54 ENVIRONMENTAL SCIENCES↗

Comparing Ocean Surface Boundary Vertical Mixing Schemes Including Langmuir Turbulence

Six recent Langmuir turbulence parameterization schemes and five traditional schemes are implemented in a common single-column modeling framework and consistently compared. These schemes are tested in scenarios versus matched large eddy simulations, across the globe with realistic forcing (JRA55-do,WAVEWATCH-III simulated waves) and initial conditions (Argo), and under realistic conditions as observed at ocean moorings. Traditional non-Langmuir schemes systematically underpredict large eddy simulation vertical mixing under weak convective forcing, while Langmuir schemes vary in accuracy. Under global, realistic forcing Langmuir schemes produce 6% (–1% to 14% for 90% confidence) or 5.2 m (–0.2 m to 17.4 m for 90% confidence) deeper monthly mean mixed layer depths than their non-Langmuir counterparts, with the greatest differences in extratropical regions, especially the Southern Ocean in austral summer. Discrepancies among Langmuir schemes are large (15% in mixed layer depth standard deviation over the mean): largest under wave-driven turbulence with stabilizing buoyancy forcing, next largest under strongly wave-driven conditions with weak buoyancy forcing, and agreeing during strong convective forcing. Non-Langmuir schemes disagree with each other to a lesser extent, with a similar ordering. Langmuir discrepancies obscure a cross-scheme estimate of the Langmuir effect magnitude under realistic forcing, highlighting limited understanding and numerical deficiencies. Maps of the regions and seasons where the greatest discrepancies occur are provided to guide further studies and observations.

58 GEOSCIENCES↗

Multi‐Scale Temporal Variability of Turbulent Mixing During a Monsoon Intra‐Seasonal Oscillation in the Bay of Bengal: An LES Study

A process study using large‐eddy simulations is carried out to explore the dominant 1‐D processes that affect mixed layer (ML) properties during an event of summer Monsoon Intra‐seasonal Oscillations (MISO) in the Bay of Bengal (BOB). These simulations use realistic air‐sea fluxes and initial conditions that were collected during the summer 2018 MISO‐BOB field experiment to explore the roles of thermal inversion layer (TIL) and Langmuir turbulence (LT) in modulating ML properties. The simulations span an active period with heavy rain and strong winds and a break period with strong solar heat flux and little rain. The mixed layer depth (MLD), sea surface temperature (SST) and sea surface salinity (SSS) are most affected by the presence of near‐inertial oscillations, solar heating and precipitation, all of which occur at different timescales. The subsurface warming induced by the TIL reduces the SST variability at the MISO timescale when compared with the simulation without TIL. Comparison of simulations with and without LT indicates that LT enhances subsurface warming during the active phase and reduces diurnal SST modulation during the break phase. Finally, simulations with 1‐D mixing models show a wide disparity in the evolution of MLD, SST, and SSS.

54 ENVIRONMENTAL SCIENCES↗

The role of mixed vibronic Q y -Q x states in green light absorption of light-harvesting complex II

The importance of green light for driving natural photosynthesis has long been underappreciated, however, under the presence of strong illumination, green light actually drives photosynthesis more efficiently than red light. This green light is absorbed by mixed vibronic Q y -Q x states, arising from chlorophyll (Chl)-Chl interactions, although almost nothing is known about these states. Here, we employ polarization-dependent two-dimensional electronic-vibrational spectroscopy to study the origin and dynamics of the mixed vibronic Q y -Q x states of light-harvesting complex II. We show the states in this region dominantly arise from Chl b and demonstrate how it is possible to distinguish between the degree of vibronic Q y versus Q x character. We find that the dynamics for states of predominately Chl b Q y versus Chl b Q x character are markedly different, as excitation persists for significantly longer in the Q x states and there is an oscillatory component to the Q x dynamics, which will be discussed. Our findings demonstrate the central role of electronic-nuclear mixing in efficient light-harvesting and the different functionalities of Chl a and Chl b .

59 BASIC BIOLOGICAL SCIENCES↗

Engineering microbial consortia for mixed plastic upcycling

Recent studies in developing processes using ‘single’ plastic waste for microbial conversion have demonstrated great promise in advancing a circular economy. However, chemical complexity and compositional variability of post-consumer ‘mixed’ plastic waste pose huge challenges to using it as a feedstock for biomanufacturing. Here, we present a process leveraging a synthetic microbial consortium, comprising Rhodococcus jostii strain PET and Acinetobacter baylyi ADP1, enabled by engineering the division of labor. The robust consortium synergistically and stably consumes diverse mixtures of oxygenated compounds, derived from the depolymerization of post-consumer, mixed plastic waste, regardless of the fluctuating plastic waste compositions. We evaluate the upcycling potential of the stable consortium by applying rational metabolic engineering to both specialists, enabling the funneling of these oxygenates into lycopene and lipids. This work highlights the potential of stable microbial consortia to valorize untapped, mixed plastic waste for sustainable biomanufacturing, offering a promising solution to global plastic pollution.

60 APPLIED LIFE SCIENCES↗

Candidate for the one-phonon mixed-symmetry state in {sup 130}Xe

Low-spin states of {sup 130}Xe have been populated by a {beta}-delayed fusion evaporation reaction. By measuring E2/M1 mixing-ratios of the transitions 2{sub 3,4}{sup +}{yields}2{sub 1}{sup +}, two candidates for the one-phonon mixed-symmetry state were found. The experimental results are supported by a shell-model calculation, which also allows the calculation of multipole mixing-ratios.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutrino Mixing in Unified Extended Seesaw Model

The seesaw mechanism can play a key role in the generation of the leptonic mixing in unified models. We consider an unified model with a family symmetry and extended seesaw, and obtain viable fermion masses and mixing (leptonic mixing is close to tri-bi-maximal).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sub-Doppler Spectroscopy of Mixed State Levels in CH2

Perturbations in the 7{sub 16} and 8{sub 18} mixed singlet/triplet levels of {tilde a} {sup 1}A{sub 1}(0,0,0) methylene, CH{sub 2}, have been reinvestigated by frequency-modulated laser sub-Doppler saturation spectroscopy. The hyperfine structure was completely resolved for both the predominantly singlet and the predominantly triplet components of these mixed rotational levels using {tilde b} {sup 1}B{sub 1}-{tilde a}{sup 1}A{sub 1} optical transitions near 12,200 cm{sup -1} with megahertz resolution. The mixing coefficients were obtained from the observed hyperfine splittings and a two-level deperturbation model. The analysis also determines the energy separation of the unperturbed zero-order levels and the unperturbed hyperfine splittings for the triplet perturbing levels 6{sub 15} {tilde X} {sup 3}B{sub 1}(0,3,0) and 9{sub 37} {tilde X} {sup 3}B{sub 1}(0,2,0).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum-Gravity Phenomenology of soft ultraviolet/infrared mixing

We reexamine the motivation for ultraviolet/infrared mixing in quantum gravity and some of the quantum-spacetime formalizations where it has been found. We then focus on cases in which the infrared manifestations of the mixing are relatively soft, arguing that they can motivate a particularly appealing phenomenology. Among the possible implications for the large-distance behavior of gravity one intriguingly finds a correction with logarithmic dependence on distance. And one can explain in terms of soft ultraviolet/infrared mixing a four-standard-deviation discrepancy that was recently established in the context of studies of cold neutrons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mixing of two collinear Rayleigh waves in an isotropic nonlinear elastic half-space

Nonlinear mixing of two collinear, initially monochromatic, Rayleigh waves propagating in the same direction in an isotropic, nonlinear elastic solid is investigated analytically. A system of coupled ordinary differential equations is derived based on the Lagrange equations of the second kind to predict the evolution of the higher harmonic and combination frequency components of the fundamentals waves. Numerical results show that the energy transfer is larger for higher frequencies, and that the oscillation of the energy between the different frequency components depends on the amplitudes and frequencies of the fundamental waves. Furthermore, it is illustrated that the horizontal velocity component can form a shock wave while the vertical velocity component can form a pulse. The occurrence of these effects is independent of the specific fundamental frequencies and amplitudes that are mixed. However, the nonlinear interaction is more efficient when the mixing frequencies are close to each other which increases both effects. The analytical model is then extended by implementing diffraction effects in the parabolic approximation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strongly modified four-wave mixing in a coupled semiconductor quantum dot-metal nanoparticle system

We study the four-wave mixing effect in a coupled semiconductor quantum dot-spherical metal nanoparticle structure. Depending on the values of the pump field intensity and frequency, we find that there is a critical distance that changes the form of the spectrum. Above this distance, the four-wave mixing spectrum shows an ordinary three-peaked form and the effect of controlling its magnitude by changing the interparticle distance can be obtained. Below this critical distance, the four-wave mixing spectrum becomes single-peaked; and as the interparticle distance decreases, the spectrum is strongly suppressed. The behavior of the system is explained using the effective Rabi frequency that creates plasmonic metaresonances in the hybrid structure. In addition, the behavior of the effective Rabi frequency is explained via an analytical solution of the density matrix equations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A simple dissolved metals mixing method to produce high-purity MgTiO{sub 3} nanocrystals

A simple dissolved metals mixing method has been effectively used to produce high-purity MgTiO{sub 3} (MT) nanocrystals. The method involves the mixing of independently dissolved magnesium and titanium metal powders in hydrochloric acid followed by calcination. The phase purity and nanocrystallinity were determined by making use of laboratory x-ray diffraction data, to which Rietveld-based analyses were performed. Results showed that the method yielded only one type magnesium titanate powders, i.e. MgTiO{sub 3}, with no Mg{sub 2}TiO{sub 4} or MgTi{sub 2}O{sub 5} phases. The presence of residual rutile or periclase was controlled by adding excessive Mg up to 5% (mol) in the stoichiometric mixing. The method also resulted in MT nanocrystals with estimated average crystallite size of 76±2 nm after calcination at 600°C and 150±4 nm (at 800°C). A transmission electron micrograph confirmed the formation of the nanocrystallites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of nuclear reaction rates and convective mixing on the evolution of a 6M{sub ȯ} star

We present the evolution of a 6M{sub ȯ} star, of solar-like initial metallicity, and investigate the effects of key nuclear reaction rates, as well as the treatment of the convective mixing on its evolution along the Cepheid instability strip. In particular, we study the effect of recent estimates of the {sup 14}N(p,γ){sup 15}O reaction on the formation and extension of the blue loop during core helium burning. We also investigate the effects induced on this blue loop by the adoption of non-standard convective mixing prescriptions, as well as the implications of modifying the Mixing Length Theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nanofluidic mixing via hybrid surface

We report the design and fabrication of the nanofluidic mixer comprising hybrid hydrophobic/hydrophilic micro-patterns on the top and bottom walls of the nanochannel. The unique feature of such mixer is that, without any geometric structure inside the nanochannel, the mixing can be realized solely by the hybrid surfaces. Besides, the mixing length in nanomixer has been significantly shortened comparing to micromixer. We attribute the mixing achievement to be caused by the convection and chaotic flows of two fluids along the hybrid surface due to the large surface-to-volume ratio of the nanochannel.

77 NANOSCIENCE AND NANOTECHNOLOGY↗