SEARCH · Engineering Papers

Results for “equilibrium modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Noise reduction in X-ray photon correlation spectroscopy with convolutional neural networks encoder–decoder models

Abstract Like other experimental techniques, X-ray photon correlation spectroscopy is subject to various kinds of noise. Random and correlated fluctuations and heterogeneities can be present in a two-time correlation function and obscure the information about the intrinsic dynamics of a sample. Simultaneously addressing the disparate origins of noise in the experimental data is challenging. We propose a computational approach for improving the signal-to-noise ratio in two-time correlation functions that is based on convolutional neural network encoder–decoder (CNN-ED) models. Such models extract features from an image via convolutional layers, project them to a low dimensional space and then reconstruct a clean image from this reduced representation via transposed convolutional layers. Not only are ED models a general tool for random noise removal, but their application to low signal-to-noise data can enhance the data’s quantitative usage since they are able to learn the functional form of the signal. We demonstrate that the CNN-ED models trained on real-world experimental data help to effectively extract equilibrium dynamics’ parameters from two-time correlation functions, containing statistical noise and dynamic heterogeneities. Strategies for optimizing the models’ performance and their applicability limits are discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Modeling of a 43 GHz microplasma within a photonic crystal

The electron density (n e ) and argon metastable density (1 s 5 ) of a 43GHz microplasma are obtained using the zero-dimensional plasma kinetics solver (ZDPlasKin®) for an incident power of 160 and 1000mW and argon pressures of 10–600Torr (1.3 ×10 3 to 8.0 × 10 4 Pa). These simulations are compared with previously published experimental data. To determine the self-consistent electric field in the modeled plasma, the three-dimensional millimeter wave fields are computed as a function of electron density using ANSYS EM19.2, HFSS®. This electromagnetic field model is coupled to ZDPlasKin such that any increase in the simulated plasma density correctly attenuates the simulated electric field within the microplasma. The electron density is found to be sensitive to argon gas temperature, so a two-zone temperature model was needed to obtain agreement with experimental measurements. The temperature in the central core of the microplasma was determined by a previous experimental study. That temperature was used as an input to the model for the simulation of volume recombination losses. The outer regions of the microplasma are assumed to be in equilibrium with the walls (300K). This second temperature was used in the model to determine diffusion losses. The modeled electron and metastable densities are of the order 10 20 and 10 18 m –3 , respectively. This is in good agreement with those measured experimentally as long as the two-zone temperature model is used. In the absence of a hot gas core, the modeled three-body recombination rates are excessive and the simulation severely under-predicts the electron density and over-estimates the metastable density. We conclude that the millimeter wave microplasma has a hot core (2500K at 600 Torr) that rarifies the argon gas and effectively reduces three-body recombination. Furthermore, this allows one to achieve high electron density on the order of 10 20 m –3 with only 100mW of wave power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1996

Flamelet Model Application for Non-Premixed Turbulent Combustion

The current Final Report contains results of the study which was performed in Scientific Research Center 'ECOLEN' (Moscow, Russia). The study concerns the development and verification of non-expensive approach for modeling of supersonic turbulent diffusion flames based on flamelet consideration of the chemistry/turbulence interaction (FL approach). Research work included: development of the approach and CFD tests of the flamelet model for supersonic jet flames; development of the simplified procedure for solution of the flamelet equations based on partial equilibrium chemistry assumption; study of the flame ignition/extinction predictions provided by flamelet model. The performed investigation demonstrated that FL approach allowed to describe satisfactory main features of supersonic H 2/air jet flames. Model demonstrated also high capabilities for reduction of the computational expenses in CFD modeling of the supersonic flames taking into account detailed oxidation chemistry. However, some disadvantages and restrictions of the existing version of approach were found in this study. They were: (1) inaccuracy in predictions of the passive scalar statistics by our turbulence model for one of the considered test cases; and (2) applicability of the available version of the flamelet model to flames without large ignition delay distance only. Based on the results of the performed investigation, we formulated and submitted to the National Aeronautics and Space Administration our Project Proposal for the next step research directed toward further improvement of the FL approach.

Secundov, A.↗

NASA NTRS1992

Numerical Modeling of a Vortex Stabilized Arcjet

Arcjet thrusters are being actively considered for use in Earth orbit maneuvering applications. Experimental studies are currently the chief means of determining an optimal thruster configuration. Earlier numerical studies have failed to include all of the effects found in typical arcjets including complex geometries, viscosity, and swirling flow. Arcjet geometries are large area ratio converging nozzles with centerbodies in the subsonic portion of the nozzle. The nozzle walls serve as the anode while the centerbody functions as the cathode. Viscous effects are important because the Reynolds number, based on the throat radius, is typically less than 1,000. Experimental studies have shown that a swirl or circumferential velocity component stabilizes a constricted arc. This dissertation describes the equations governing flow through a constricted arcjet thruster. An assumption that the flowfield is in local thermodynamic equilibrium leads to a single fluid plasma temperature model. An order of magnitude analysis reveals the governing fluid mechanics equations are uncoupled from the electromagnetic field equations. A numerical method is developed to solve the governing fluid mechanics equations, the Thin Layer Navier-Stokes equations. A coordinate transformation is employed in deriving the governing equations to simplify the application of boundary conditions in complex geometries. An axisymmetric formulation is employed to include the swirl velocity component as well as the axial and radial velocity components. The numerical method is an implicit finite-volume technique and allows for large time steps to reach a converged steady-state solution. The inviscid fluxes are flux-split, and Gauss-Seidel line relaxation is used to accelerate convergence. Converging-diverging nozzles with exit-to-throat area ratios up to 100:1 and annular nozzles were examined. Quantities examined included Mach number and static wall pressure distributions, and oblique shock structures. As the level of swirl and viscosity in the flowfield increased the mass flow rate and thrust decreased. The technique was used to predict the flow through a typical arcjet thruster geometry. Results indicate swirl and viscosity play an important role in the complex geometry of an arcjet.

Pawlas, Gary E.↗

NASA NTRS2011

What Dominates the Coronal Emission Spectrum During the Cycle of Impulsive Heating and Cooling?

The smoking gun of small-scale, impulsive events heating the solar corona is expected to be the presence of a hot ( > 5 MK) plasma component. Evidence for this has been scarce, but has gradually begun to accumulate due to recent studies designed to constrain the high temperature part of the emission measure distribution. However, the detected hot component is often weaker than models predict and this is due in part to the common modeling assumption that the ionization balance remains in equilibrium. The launch of the latest generation of space-based observing instrumentation aboard Hinode and the Solar Dynamics Observatory (SDO) has brought the matter of the ionization state of the plasma firmly to the forefront. It is timely to consider exactly what emission current instruments would detect when observing a corona heated impulsively on small-scales by nanoflares. Only after we understand the full effects of nonequilibrium ionization can we draw meaningful conclusions about the plasma that is (or is not) present. We have therefore performed a series of hydrodynamic simulations for a variety of different nanoflare properties and initial conditions. Our study has led to several key conclusions. 1. Deviations from equilibrium are greatest for short-duration nanoflares at low initial coronal densities. 2. Hot emission lines are the most affected and are suppressed sometimes to the point of being invisible. 3. The emission detected in all of the SDO-AIA channels is generally dominated by warm, over-dense, cooling plasma. 4. It is difficult not to create coronal loops that emit strongly at 1.5 MK and in the range 2 to 5 MK, which are the most commonly observed kind, for a broad range of nanoflare scenarios. 5. The Fe XV (284.16 ) emission in most of our models is about 10 times brighter than the Ca XVII (192.82 ) emission, consistent with observations. Our overarching conclusion is that small-scale, impulsive heating inducing a nonequilibrium ionization state leads to predictions for observable quantities that are entirely consistent with what is actually observed.

Bradshaw, Stephen J.↗

DOE OSTI2022

Phase diagram of the TIP4P/Ice water model by enhanced sampling simulations

In this work, we studied the phase diagram for the TIP4P/Ice water model using enhanced sampling molecular dynamics simulations. Our approach is based on the calculation of ice–liquid free energy differences from biased coexistence simulations that reversibly sample the melting and growth of layers of ice. We computed a total of 19 melting points for five different ice polymorphs, which are in excellent agreement with the melting lines obtained from the integration of the Clausius–Clapeyron equation. For proton-ordered and fully proton-disordered ice phases, the results are in very good agreement with previous calculations based on thermodynamic integration. For the partially proton-disordered ice III, we find a large increase in stability that is in line with previous observations using direct coexistence simulations for the TIP4P/2005 model. This issue highlights the robustness of the approach employed here for ice polymorphs with diverse degrees of proton disorder. Our approach is general and can be applied to the calculation of other complex phase diagrams.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1982

The dynamics of the Venus ionosphere. I - A simulation of the solar wind compression of the upper dayside ionosphere

One of the most exciting discoveries by the Pioneer Venus mission is the extreme variability in the structure of the Venus atmosphere. The solar wind plays a major, although as yet not well-defined, role in the dynamics of the ionosphere. An investigation is being conducted regarding the response of the dayside Venus ionosphere to changing solar wind conditions, in particular to the varying solar wind dynamic pressure. In the present study the dynamics of the upper (h equal to or greater than 200 km) ionosphere are simulated numerically using a one-dimensional, spherically symmetric, Lagrangian hydrodynamic code developed by Stein and Schwartz (1972). The ionosphere is assumed to be unmagnetized and is represented with a two-fluid model. The initial ionosphere is chosen to be in pressure equilibrium with the solar wind at the ionopause. It is shown how some of the time-dependent features of the Venus ionosphere may be simulated with the considered model.

Wolff, R. S.↗

NASA NTRS1988

Estimating the seasonal carbon source-sink geography of a natural, steady-state terrestrial biosphere

The estimation of the seasonal dynamics of biospheric-carbon sources and sinks to be used as an input to global atmospheric CO2 studies and models is discussed. An ecological biosphere model is given and the advantages of the model are examined. Monthly maps of estimated biospheric carbon source and sink regions and estimates of total carbon fluxes are presented for an equilibrium terrestrial biosphere. The results are compared with those from other models. It is suggested that, despite maximum variations of atmospheric CO2 in boreal latitudes, the enormous contributions of tropical wet-dry regions to global atmospheric CO2 seasonality can not be ignored.

Box, Elgene O.↗

NASA NTRS1980

Greenhouse models of Venus' high surface temperature, as constrained by Pioneer Venus measurements

Recent measurements conducted from the Pioneer Venus probes and orbiter have provided a significantly improved definition of the solar net flux profile, the gaseous composition, temperature structure, and cloud properties of Venus' lower atmosphere. Using these data, we have carried out a series of one-dimensional radiative-convective equilibrium calculations to determine the viability of the greenhouse model of Venus' high surface temperature and to assess the chief contributors to the greenhouse effect. New sources of infrared opacity include the permitted transitions of SO2, CO, and HCl as well as opacity due to several pressure-induced transitions of CO2. We find that the observed surface temperature and lapse rate structure of the lower atmosphere can be reproduced quite closely with a greenhouse model that contains the water vapor abundance reported by the Venera spectrophotometer experiment. Thus the greenhouse effect can account for essentially all of Venus' high surface temperature. The prime sources of infrared opacity are, in order of importance, CO2, H2O, cloud particles, and SO2, with CO and HCl playing very minor roles.

Pollack, J. B.↗

NASA NTRS1992

Internally heated mantle convection and the thermal and degassing history of the earth

An internally heated model of parameterized whole mantle convection with viscosity dependent on temperature and volatile content is examined. The model is run for 4l6 Gyr, and temperature, heat flow, degassing and regassing rates, stress, and viscosity are calculated. A nominal case is established which shows good agreement with accepted mantle values. The effects of changing various parameters are also tested. All cases show rapid cooling early in the planet's history and strong self-regulation of viscosity due to the temperature and volatile-content dependence. The effects of weakly stress-dependent viscosity are examined within the bounds of this model and are found to be small. Mantle water is typically outgassed rapidly to reach an equilibrium concentration on a time scale of less than 200 Myr for almost all models, the main exception being for models which start out with temperatures well below the melting temperature.

Williams, David R.↗

DOE OSTI2022

Local stress within a granular molecular solvent matrix, a mechanism for individual ion hydration

The activity of water is important in many natural systems and directed processes. To better understand water activity, the hydration of individual ions is approximated for a recently developed speciation-based solution model. Here a matrix of values for hydration of complete salts (anion and cation) was used as source data to calculate individual ion hydration values. Some electrolytes were excluded from calculations of individual ion hydration due to the prevalence of ion pairing and resulting liberation of water upon ion pairing. Evaluation of the periodic trends emerging from individual ion hydration values suggests that ionic volume, relative to the volume of molecular water, dictates both modeled hydration requirements (related to vapor-liquid-equilibrium-derived activity) as well as properties historically described by hydrodynamic radius (ion diffusion and solution viscosity). When water is conceptualized as a granular three-dimensional matrix, solutes may function as substitutional defects (dilation or constriction) inducing local compressive or tensile stress. These results have implications on the mechanism of the Hofmeister series and series reversals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Development, Implementation, and Verification of Partially-Ionized Collisional Multifluid Plasma Models in Drekar

We consider the development of multifluid models for partially ionized multispecies plasmas. The models are composed of a standard set of five-moment fluid equations for each species plus a description of electromagnetics. The most general model considered utilizes a full set of fluid equations for each charge state of each atomic species, plus a set of fluid equations for electrons. The fluid equations are coupled through source terms describing electromagnetic coupling, ionization, recombination, charge exchange, and elastic scattering collisions in the low-density coronal limit. The form of each of these source terms is described in detail, and references for required rate coefficients are identified for a diverse range of atomic species. Initial efforts have been made to extend these models to incorporate some higher-density collisional effects, including ionization potential depression and three- body recombination. Some reductions of the general multifluid model are considered. First, a reduced multifluid model is derived which averages over all of the charge states (including neutrals) of each atomic species in the general multifluid model. The resulting model maintains full consistency with the general multifluid model from which it is derived by leveraging a quasi-steady-state collisional ionization equilibrium assumption to recover the ionization fractions required to make use of the general collision models. Further reductions are briefly considered to derive certain components of a single-fluid magnetohydrodynamics (MHD) model. In this case, a generalized Ohm's law is obtained, and the standard MHD resistivity is expressed in terms of the collisional models used in the general multifluid model. A number of numerical considerations required to obtain robust implementations of these multifluid models are discussed. First, an algebraic flux correction (AFC) stabilization approach for a continuous Galerkin finite element discretization of the multifluid system is described in which the characteristic speeds used in the stabilization of the fluid systems are synchronized across all species in the model. It is demonstrated that this synchronization is crucial in order to obtain a robust discretization of the multifluid system. Additionally, several different formulations are considered for describing the electromagnetics portion of the multifluid system using nodal continuous Galerkin finite element discretizations. The formulations considered include a parabolic divergence cleaning method and an implicit projection method for the traditional curl formulation of Maxwell's equations, a purely- hyperbolic potential-based formulation of Maxwell's equations, and a mixed hyperbolic-elliptic potential-based formulation of Maxwell's equations. Some advantages and disadvantages of each formulation are explored to compare solution robustness and the ease of use of each formulation. Numerical results are presented to demonstrate the accuracy and robustness of various components of our implementation. Analytic solutions for a spatially homogeneous damped plasma oscillation are derived in order to verify the implementation of the source terms for electromagnetic coupling and elastic collisions between fluid species. Ionization balance as a function of electron temperature is evaluated for several atomic species of interest by comparing to steady-state calculations using various sets of ionization and recombination rate coefficients. Several test problems in one and two spatial dimensions are used to demonstrate the accuracy and robustness of the discretization and stabilization approach for the fluid components of the multifluid system. This includes standard test problems for electrostatic and electromagnetic shock tubes in the two-fluid and ideal shock-MHD limits, a cylindrical diocotron instability, and the GEM challenge magnetic reconnection problem. A one-dimensional simplified prototype of an argon gas puff configuration as deployed on Sandia's Z-machine is used as a demonstration to exercise the full range of capabilities associated with the general multifluid model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1979

Skylab observations of the Al I autoionization lines gamma 1932 and gamma 1936 during a solar flare

Observations are presented of the Al I autoionization lines gamma 1932 and gamma 1936 during the H alpha class SN subflare of 1973 August 9, obtained from the NRL slit spectrograph aboard Skylab. These profiles are compared with observations from an active-region plage and with the quiet-sun observations of McAllister. Line profiles through model flare and quiet-sun atmospheres are computed assuming local thermodynamic equilibrium. The Al I autoionization lines are sensitive to the conditions just below the temperature-minimum region of the model atmosphere, and the observations support evidence that increased heating of this region occurs during flares. It shown, using observations from three additional flares, that excess flare heating down to the T sub min region probably occurs only near loop footpoints. The behavior of Fe and Fe II lines in the 1920 A range is also discussed.

Cook, J. W.↗

NASA NTRS1992

Large eddy simulations and direct numerical simulations of high speed turbulent reacting flows

The basic objective of this research is to extend the capabilities of Large Eddy Simulations (LES) and Direct Numerical Simulations (DNS) for the computational analyses of high speed reacting flows. In the efforts related to LES, we were primarily involved with assessing the performance of the various modern methods based on the Probability Density Function (PDF) methods for providing closures for treating the subgrid fluctuation correlations of scalar quantities in reacting turbulent flows. In the work on DNS, we concentrated on understanding some of the relevant physics of compressible reacting flows by means of statistical analysis of the data generated by DNS of such flows. In the research conducted in the second year of this program, our efforts focused on the modeling of homogeneous compressible turbulent flows by PDF methods, and on DNS of non-equilibrium reacting high speed mixing layers. Some preliminary work is also in progress on PDF modeling of shear flows, and also on LES of such flows.

Givi, P.↗

DOE OSTI2022

The temperatures of ejecta transporting in vacuum and gases

In this work, we measure continuous thermal radiance from evolving clouds of liquid metal fragments ejected into vacuum, nonreactive, and reactive gas. We implement a model for the thermalization of the ejecta and gas and use this to constrain the absolute temperature of the ejecta cloud. This model enables further analyses of ejecta thermal behavior under a variety of conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1976

Monte Carlo calculations of diatomic molecule gas flows including rotational mode excitation

The direct simulation Monte Carlo method was used to solve the Boltzmann equation for flows of an internally excited nonequilibrium gas, namely, of rotationally excited homonuclear diatomic nitrogen. The semi-classical transition probability model of Itikawa was investigated for its ability to simulate flow fields far from equilibrium. The behavior of diatomic nitrogen was examined for several different nonequilibrium initial states that are subjected to uniform mean flow without boundary interactions. A sample of 1000 model molecules was observed as the gas relaxed to a steady state starting from three specified initial states. The initial states considered are: (1) complete equilibrium, (2) nonequilibrium, equipartition (all rotational energy states are assigned the mean energy level obtained at equilibrium with a Boltzmann distribution at the translational temperature), and (3) nonequipartition (the mean rotational energy is different from the equilibrium mean value with respect to the translational energy states). In all cases investigated the present model satisfactorily simulated the principal features of the relaxation effects in nonequilibrium flow of diatomic molecules.

Yoshikawa, K. K.↗

DOE OSTI2025

Large-scale tearing-mode hazard function analysis with standard matched equilibrium reconstructions

The association between features from standard tokamak equilibrium reconstructions and the onset of n = 1 tearing modes (TMs) is analyzed at scale. The TM onset rate is directly modeled with a ‘hazard’ function which gives the expected number of onsets (per unit time spent) in a given equilibrium parameter region. In particular the different statistical modeling performance achieved for magnetics-only reconstructions and motional Stark effect (MSE) enhanced reconstructions is studied. It is observed that a better hazard model for the TM onset rate can be built with the MSE-enhanced equilibria compared to the matched magnetics-only situation. This advantage disappears if internal profile details are withheld from the matched analysis. Plausibility of the hazard function is further demonstrated with visualizations of global trends in the operational space, and time-traces from specific tokamak discharges. As a result, TMs typically degrade tokamak plasma performance and may lead to plasma termination, motivating this statistical study.

equilibrium↗

DOE OSTI2021

Probing configurational disorder in ZnGeN 2 using cluster-based Monte Carlo

ZnGeN 2 is sought as a semiconductor with comparable lattice constant to GaN and tunable band gap for integration in optoelectronic devices. Configurational disorder on the cation sublattice of ZnGeN 2 can strongly modify the electronic structure compared to the ordered material, and both ordered and disordered forms of ZnGeN 2 are candidates for light-emitting diodes and other emitters. The nonisovalent character of the disordered species (Zn 2+ and Ge 4+ ) subjects the cation ordering to strong short-range order effects. To model these effects, we use Monte Carlo (MC) simulations utilizing a cluster expansion to approximate formation enthalpy. Representative disordered configurations in 1024-atom supercells are relaxed in density functional theory calculations. From the MC structures, we extract a short-range order parameter (the N-cation coordination motif), and two long-range order parameters (Bragg-Williams and stretching parameters), and examine their correlations. We perform a thermodynamic integration to determine the mixing entropy and free energy. ZnGeN 2 exhibits a first-order phase transition with pronounced discontinuities in enthalpy and entropy, as well as in the structural order parameters. We discuss the relationship between the effective temperature used in the MC simulation and the growth temperatures in experiment in relation to the crossover from the nonequilibrium to the equilibrium growth regime. This work expands on current models of site disorder in ZnGeN 2 and provides atomic structure models with a systematic variation of the degree of cation disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗