SEARCH · Engineering Papers

Results for “division”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Notice of Submittal – 2023 Radionuclide Air Emissions Report for Los Alamos National Laboratory

This report describes the emissions of airborne radionuclides from operations at Los Alamos National Laboratory (LANL) for calendar year 2023 and the resulting off-site dose from these emissions. This document fulfills the requirements established by the National Emissions Standards for Hazardous Air Pollutants in 40 CFR 61, Subpart H – Emissions of Radionuclides other than Radon from Department of Energy Facilities, commonly referred to as the Radionuclide NESHAP or Rad-NESHAP. Compliance with this regulation and preparation of this document is the responsibility of LANL’s Rad NESHAP compliance program, which is part of the Environmental Protection and Compliance (EPC) Division. The information in this report is required under the Clean Air Act and is being submitted to the U.S. Environmental Protection Agency (EPA) Headquarters and EPA Region 6. The highest effective dose equivalent (EDE) to an off-site member of the public was calculated using procedures specified by the EPA and described in this report. LANL’s EDE was 0.43 for 2023. The annual limit is 10 millirem per year, established by the EPA in 40 CFR 61 Subpart H. All measured air emissions are modeled to a single location, known as the Maximally Exposed Individual (MEI). During calendar year 2023, LANL continuously monitored radionuclide emissions at 28 “major” release points, or stacks. The Laboratory estimates emissions from an additional 59 “minor” release points using radionuclide usage source terms in lieu of stack monitoring. Also, LANL uses an EPA approved network of air samplers around the Laboratory perimeter to monitor ambient airborne levels of radionuclides. To provide data for dispersion modeling and dose assessment, LANL maintains and operates several meteorological monitoring towers. From these various systems, a comprehensive evaluation is conducted to calculate the MEI dose for the Laboratory. The MEI can be any member of the public at any off-site location where there is a residence, school, business, or office. In 2023, this MEI location was a business at 129 New Mexico State Road 4 (NM-4), located in the northern end of White Rock. The primary contributors to the off-site dose at this location are the ambient air data at that location combined with the collected potential emissions from unmonitored (minor) sources. Overall, the MEI dose in 2023 is similar to that which has been observed in recent years, and it remains well below the EPA’s 10 millirem per year limit. Doses reported to the EPA for the past 10 years are shown in Table E1.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

IB3A Helium Recovery System

An evaluation of the Fermilab's helium cryogenics test facilities has identified a pressing need for a helium recovery system in the Technical Division's Industrial Building 3a (IB3A). The IB3A facility, which plays a crucial role in testing components for various research projects, including the High-Luminosity LHC Accelerator Upgrade and Mu2e, currently vents helium into the air. Implementing recovery practices is essential due to helium's non-renewable nature and the goal of sustaining the Fermilab's scientific operations long-term. This poster covers benefits helium recovery for Fermilab and highlights the most important aspects of current helium recovery effort.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Monitoring Helium Cryogen Usage with iFix Software at IB1 Test Facility

At the IB1 facility of the Applied Physics and Superconducting Technology Directorate within the Cryogenic Division at Fermilab, liquid helium is essential to the testing activities. The test stands used require large amounts of Helium to test the thermal and superconducting cavities and magnets. The liquid helium that enters the test stand is monitored through a series of valves and controls to determine the start and stop for monitoring time. There are 3 phases of cryogen usage that must be considered for each stand, cooldown, warming and overnight mode. With a new system in place, cold hour tracking will be more objective and precise within each test stand ensuring better calculations for user s fees that will provide funding for the replenishment of helium and continual operation at IB1.

Trillo, Angelica↗

DOE OSTI2024

Modification of CO2/H2O Selectivity of Polymer Through Graphene Coating for Carbon Capture Materials

A harmful issue that needs attention and solution is the rising carbon dioxide (CO2) in our atmosphere. Carbon dioxide in our atmosphere is at an all time high and has continuously increased since the industrial revolution. It has increased tremendously going from 315 parts per million (ppm) in the 1960s up to 419.3 ppm in 2023 as shown in Figure 1. Moreover, CO2 emissions have increased from 11 billion tons/year in the 1960s to 38.6 billion tons/year in 2023. The increase in CO2 found in our atmosphere has a number of detrimental effects such as increase in global temperatures and an increase in the ocean’s acidity. Human activities are greatly involved in the cause of CO2 emissions. At Lawrence Livermore National Lab (LLNL) the Microencapsulated CO2 sorbents (MECS) division has been doing research and investigating formulations for their microcapsules. MECS are core-shell microcapsules consisted of a highly permeable polymer shell and a fluid (sodium carbonate solution) that reacts and absorbs carbon dioxide. An example of the microcapsules are shown in Figure 2. Equation 1 shows the chemical reaction of the fluid (sodium carbonate) contained in the polymer shell that acts as the carbon dioxide sorbent and becomes sodium bicarbonate. The LLNL MECS team is in the process of scaling up their microcapsules for potential applications in “carbon capture from flue gas streams generated by fossil fuel combustion in industrial plants and operations, carbon capture in breweries and soft drink manufacture, carbon capture directly from indoor air to improve its quality”. The microcapsule’s possibility for commercial applications was discovered in 2017.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Site A and Plot M 2023 Surveillance Report and 2024 Inspection Report

This report is prepared for the U. S. Department of Energy (DOE) Office of Legacy Management (DOE-LM) by the Worker Safety & Environment (WSE) Division at Argonne National Laboratory (Argonne). Beginning in 2024, Argonne drafted a combined report containing the annual inspection results for the current year and the annual surveillance data/discussion from the previous year. The annual inspection results will be contained within an appendix at the end of the surveillance report. The results of the environmental monitoring program at Site A and Plot M and an assessment of the impact of the site on the environment and the public are presented in this publication as well as findings and assigned corrective actions as a result of the Site A/Plot M annual inspection. Funding to support this program was provided by DOE-LM.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Consequence Management Cobalt Magnet 2022 Laboratory Analysis: After Action Report

On May 16-20, 2022, federal mission partners (e.g., DOE Consequence Management, CDC, FDA, FBI, DHS) as well as integrated state, local, tribal, and territorial governments took part in Cobalt Magnet 22 (CM22), a large-scale, week-long radiological incident exercise in Austin, Texas, that linked several important national assets (National Search Program, Radiological Assistance Program, and Consequence Management [CM] personnel) into a single response effort. The exercise had nine (9) overarching Objectives and an additional 162 associated Critical Tasks for all the participating organizations. In total, 13 National Core Capabilities spanning 5 Mission Areas were represented in the final exercise. This exercise enabled a full range of capabilities to be fielded together and examine the operational connection between major assets, discover any resource shortages associated with conducting multiple mission areas simultaneously or in close succession, and identify any challenges related to leadership. This report summarizes nearly 100 successes and observations provided from players and controllers supporting the LA Division, Fly Away Laboratory (FAL) and Gamma Spectroscopist operations. The observations were categorized to align with the FRMAC programmatic functional areas to consider for future improvements: Logistics, CBRN Responder, Laboratory Analysis, Sampling and Monitoring, Health and Safety, Gamma Spectroscopist Operations, Fly Away Laboratory, and the FRMAC Interdivision Interoperability Group (FIIG).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

How is Rational Design of Electrocatalysts Crucial for Maximizing CO2 Electroreduction Performance?

The invited talk "How is Rational Design of Electrocatalysts Crucial for Maximizing CO2 Electroreduction Performance?” was presented in the symposium "Electrocatalysis for Sustainable Energy and Biomass Conversion: Fundamentals, Applications, and Perspectives”, Division of Catalysis Science and Technology, 2024 ACS Fall Meeting. The presentation briefly introduces NETL facilities and our Electrochemical Carbon Conversion portfolio to audiences. The talk primarily discusses how the geometry and surface composition of copper- and tin-based electrocatalysts would maximize the CO2 conversion to sustainable, carbon-neutral gas and liquid products in different device configurations. Ex situ and in situ characterization results are additionally discussed to correlate the structural, physico-chemical, and electronic properties with CO2 reduction activity and selectivity.

Nguyen Phan, Thuy Duong↗

DOE OSTI2024

LYNM PE1 Shot A Meteorology Team Technical Report

Weather support for Shot A was done by NOAA’s Air Resources Laboratory (ARL) / Special Operations and Research Division (SORD) and Lawrence Livermore National Laboratory (LLNL). Weather support activities included wind and precipitation forecasting, maintaining and monitoring PE1 meteorology towers MT02-11, maintaining and monitoring the ARL/SORD tower on Aqueduct Mesa (A12AI, also called MT01), maintaining and monitoring the Blackbrush energy flux tower, radiosonde preparation and launch, providing weather conditions on shot day for go/no-go criteria, and quality control and submission of the datasets. ARL/SORD additionally maintains and monitors the meteorological tower network (Mesonet) and sodar (at Desert Rock) for NNSS.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Preliminary Experimental Results in Support of the Development of EPP and SMT Design Methods and Viscoplastic Model for A709

The ASME code qualification effort for Alloy 709 (A709) is currently underway to qualify it for Class A construction in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section III, Division 5. The United States (U.S.) Department of Energy (DOE) national laboratories are collaborating in the advanced materials development initiative to investigate the mechanical performance of A709 in support of its code qualification. As part of the A709 code qualification effort, this report summarizes ORNL’s initial experimental findings that support the integration of A709 into the elastic-perfectly plastic (EPP) strain limits code case. It also covers thermomechanical fatigue testing conducted to develop viscoelastic material models, along with the preliminary results of creep-fatigue experiments at 816°C using the Simplified Model Test (SMT) method.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Initial Alloy 709 constitutive models for use with the ASME design by inelastic analysis and EPP+SMT design methods

This report details a preliminary inelastic constitutive model describing the behavior of Alloy 709. This model will serve two purposes: (1) integration into Nonmandatory Appendix HBB-Z of the ASME Boiler & Pressure Vessel Code Section III, Division 5 and (2) extrapolating cyclic test data to difficult to measure conditions for formulating improved creep-fatigue design methods. For both applications, the model must accurately capture the material behavior across a wide range of temperatures and a variety of test conditions, both monotonic and cyclic. For this purpose we adopt a universal model form under consideration to standardize the description of high temperature constitutive models in the ASME Code. This report briefly restates that model form and how we calibrate the model against the test data, summarizes the test database, and validates the final, trained model by comparison to the experimental tests.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Updated ASME design correlations and qualification plan for powder bed fusion 316H stainless steel

This report provides an update on the Advanced Materials and Manufacturing Technologies (AMMT) program effort to qualify Laser-Powder Bed Fusion (L-PBF) 316H stainless steel for use with the ASME Boiler & Pressure Vessel Code Section III, Division 5 rules. The report summarizes progress in testing and characterizing L-PBF material at elevated temperatures by providing preliminary design data for L-PBF 316H and by comparing the elevated temperature performance of the L-PBF material to wrought and conventional fusion welded 316H. The report then updates the initial AMMT qualification plan for L-PBF 316H, originally developed in 2023, to update the accelerated qualification strategy adopted in that plan to account for the new high temperature test data. The report also explores a few methods for further accelerating the qualification process using machine learning techniques to supplement the more conventional, empirical analysis methods typically used by ASME to correlate and extrapolate time-dependent material test data.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Summary of FY 2024 A709 Code Case testing at ANL, INL and ORNL

A collaborative research and development effort in support of the Alloy 709 Code Case qualification in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section III, Division 5, High Temperature Reactors is being carried out at Oak Ridge National Laboratory (ORNL), Idaho National Laboratory (INL), and Argonne National Laboratory (ANL). Key testing data for the Alloy 709 100,000-hr near-term Code Case submittal to ASME is expected to be completed by the end of 2024, with design parameters anticipated to be finalized in FY 2025. This report summarizes the testing results for three commercial heats of Alloy 709 conducted across three laboratories, reviews the current testing status, and outlines the remaining data needed to support the first Alloy 709 Code Case submittal to ASME. The Alloy 709 Code Case plan remains on schedule.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

DuraMelter 100 Sub-Envelope Changeover Testing Using LAW SubEnvelopes A1 and C1 Feeds in Support of the LAW Pilot Melter (Final Report)

The primary goal of the testing described in this report was to develop and recommend a compliant HLW glass formulation to support the actual waste testing of AZ-101 Envelope D waste (blended with actual pretreatment products including Cs- and Tc-eluates from pretreatment of AP-101 and AZ-101 LAW). Testing of actual waste will be performed at Battelle, Pacific Northwest Division. The test objective was met by the development and recommendation of the glass formulation HLW98-95; the formulation has been transmitted to the WTP to support vitrification of HLW AZ-101 actual waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

Cluster for Research Excellence (CRE) for Accelerator Physics

The purpose of this Cooperative Research and Development Agreement (CRADA) was to establish a Cluster of Research Excellence (CRE) for Accelerator Physics and broaden the accelerator physics collaboration between Northern Illinois University (NIU) and Fermilab. The CRE was based in both Fermilab’s Accelerator Division and in NIU’s Department of Physics. A research agenda and strategy for the CRE for Accelerator Physics included specific research topics, experiments, and research facility upgrades. The scope of the research program covered two thrusts with subtopics in the Accelerator Science Research Program utilizing the infrastructure of FAST, IOTA, the Fermilab Accelerator Complex, and the Illinois Accelerator Research Center (IARC). Specific areas of proposed exploration included: 1.Tests of novel “nonlinear integrable” systems including beam self-fields; 2.Experimental tests of phase-space diffusion and chaos in intense beams; 3.Investigate technically feasible approaches towards next generation intenseneutrino facilities; 4.Understanding optical control of charged particle beams; 5.Exploitation of bright electron beams from FAST for novel applications; 6. Conduct research into accelerator-based ‘precision science’, such as Muon g-2, EDM, Mu2e, etc.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

How much is surface dopant enough to maximize CO2-to-liquid chemicals conversion at industrially relevant current density?

This invited talk will be presented at the symposium "Waste Feedstock to Fuels and Petrochemicals”, Fuels and Petrochemical Division at the 2024 AIChE Annual Meeting. In this study, we will discuss how minute amount of surface heteroatoms would maximize CO2 reduction to formate/formic acid at industrially relevant current densities and high selectivity which was validated by both experimental and computational studies. The outstanding performance of the best-in-class catalysts in both H-cell and full-cell electrolyzer cell is also demonstrated. Our findings would provide additional design concepts of high performance CO2R electrocatalysts.

Nguyen Phan, Thuy Duong↗

DOE OSTI2024

EMP, Attachment 2: Data Management Plan

This Data Management Plan (DMP) is an attachment to the Pacific Northwest National Laboratory Environmental Radiological Air Monitoring Plan (EMP). PNNL is a U.S. Department of Energy Office of Science national laboratory. Radioactive effluent monitoring and environmental surveillance for PNNL operations in Washington State are the responsibility of the PNNL Environmental Protection and Regulatory Programs division and are conducted by the Environmental Radiation Task staff. This DMP describes the data management processes for PNNL radioactive air emissions (stack) monitoring and environmental radiological ambient air surveillance activities.

40 CFR 61 Subpart H↗

DOE OSTI2024

Pacific Northwest National Laboratory Facility Radionuclide Emission Points and Sampling Systems

Battelle–Pacific Northwest Division operates numerous research and development laboratories in Washington State. The U.S. Department of Energy (DOE) contracts to Battelle at Richland facilities on both the DOE Hanford Site and the Pacific Northwest National Laboratory (PNNL)-Richland campus. These facilities have the potential for radionuclide air emissions. The PNNL contract with DOE also includes operations at the PNNL-Sequim campus in Sequim, where there is also the potential for radionuclide air emissions. This document is a periodic update that describes current PNNL facility emission units and sampling systems.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Alpha-Quartz Plastic Strength Investigation Via Diffraction Experiments on Novaculite Using A D-Dia and Elastic Plastic Self- Consistent Interpretation [Thesis}

X-Ray Tomography. Porosity is commonly measured using mercury injection (MI) or water immersion porosimeter (WIP). Both MI and WIP utilize pressure to fill open voids with mercury or water respectively. A measure of the volume change of the sample is then used to estimate the percentage of open voids. However, for the purpose of rheological study it is important to get an accurate measure of open and closed voids. X-ray tomography has been selected as it offers a three-dimensional view into the sample that can quantify all pores limited only by the voxel size which is in the micron range for this study. Radiographs for tomography were collected at the Material Science and Technology Division at Los Alamos National Lab using the Carl Zeiss Xradio 520 instrument and Scout-and-Scan version 16.1 operating software. Two samples were imaged, the starting material and the deformed sample SiO2_65. 3001 radiographs were taken of the starting material with a 6 second exposure time using a 4x objective lens. The x-ray beam was set to 60 kilovoltage peak (kVp) and 5 watts. 1901 radiographs were taken of SiO2_65 with a 25 second exposure time using a 10x objective lens. The x-ray beam was set to 80 kVp and 7 watts. Radiograph files were analyzed by Brian Patterson using Avizo. Void and inclusion volumes were output by voxel sized (1.03 μm) slices, used to calculate a total percentage volume for the starting material.

36 MATERIALS SCIENCE↗