Multifunctional smart electronic skin fabricated from two-dimensional like polymer film
Not provided.
Chemistry↗
SEARCH · Engineering Papers
Results for “dimensional changes”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Axial Tensile Failure Analysis of SiC{sub f}/Ti Composite Based on Continuum Cohesive Zone Model
In this paper, the failure behavior of SiC fiber-reinforced Ti-6Al-4V matrix composite (SiC{sub f}/Ti) under longitudinal loads was studied experimentally and theoretically. Experimental results show that the interface of SiC{sub f}/Ti composite is continuous and integral. Through SEM observations, it was found that transverse matrix cracks initiated from the debonding region of the interface. A three-dimensional representative volume element was developed to simulate the failure process of SiC{sub f}/Ti-6Al-4V composite. A continuum cohesive zone model is employed to describe the debonding behavior at the interface, compared with a discrete one. More accurate simulated results were obtained by a continuum cohesive zone model, corresponding to experimental results. The transverse cracking behavior of the matrix was simulated. The stress–strain curves predicted by the continuum cohesive zone model show a good agreement with the experimental results. The fiber volume fraction, interface strength and interface toughness are investigated to exhibit their influences upon the longitudinal mechanical characteristics of SiC{sub f}/Ti-6Al-4V composite.
36 MATERIALS SCIENCE↗
Two charges on plane in a magnetic field: III. He{sup +} ion
The He{sup +} ion on a plane subject to a constant magnetic field B perpendicular to the plane is considered taking into account the finite nuclear mass. Factorization of eigenfunctions permits to reduce the four-dimensional problem to three-dimensional one. The ground state energy of the composite system is calculated in a wide range of magnetic fields from B=0.01 up to B=100a.u. and center-of-mass Pseudomomentum K from 0 to 1000 a.u. using a variational approach. The accuracy of calculations for B=0.1a.u. is cross-checked in Lagrange-mesh method and not less than five significant figures are reproduced in energy. Similarly to the case of moving neutral system on the plane a phenomenon of a sharp change of energy behavior as a function of K for a certain critical K{sub c} but a fixed magnetic field occurs.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Micromagnetism in a planar system with a random magnetic anisotropy and two-dimensional magnetic correlations
The hysteresis loops and the micromagnetic structure of a ferromagnetic nanolayer with a randomly oriented local easy magnetization axis and two-dimensional magnetization correlations are studied using a micromagnetic simulation. The properties and the micromagnetic structure of the nanolayer are determined by the competition between the anisotropy and exchange energies and by the dipole–dipole interaction energy. The magnetic microstructure can be described as an ensemble of stochastic magnetic domains and topological magnetization defects. Dipole–dipole interaction suppresses the formation of topological magnetization defects. The topological defects in the magnetic microstructure can cause a sharper change in the coercive force with the crystallite size than that predicted by the random magnetic anisotropy model.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Quadratic to linear magnetoresistance tuning in TmB 4
The change of a material’s electrical resistance (R) in response to an external magnetic field (B) provides subtle information for the characterization of its electronic properties and has found applications in sensor and storage related technologies. In good metals, Boltzmann’s theory predicts a quadratic growth in magnetoresistance (MR) at low B, and saturation at high fields. On the other hand, a number of nonmagnetic materials with weak electronic correlation and low carrier concentration for metallicity, such as inhomogeneous conductors, semimetals, narrow gap semiconductors and topological insulators, two dimensional electron gas (2DEG) show positive, non-saturating linear magnetoresistance (LMR). However, observation of LMR in single crystals of a good metal is rare. Here we present low-temperature, angledependent magnetotransport in single crystals of the antiferromagnetic metal, TmB4. We observe large, positive and anisotropic MR(B), which can be tuned from quadratic to linear by changing the direction of the applied field. In view of the fact that isotropic, single crystalline metals with large Fermi surface (FS) are not expected to exhibit LMR, we attribute our observations to the anisotropic FS topology of TmB 4 . Furthermore, the linear MR is found to be temperature-independent, suggestive of quantum mechanical origin.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Isopycnal mixing by mesoscale eddies significantly impacts oceanic anthropogenic carbon uptake
Abstract Anthropogenic carbon dioxide uptake varies across Earth System Models for reasons that have remained obscure. When varied within a single model, the lateral eddy mixing coefficient A Redi produces a range of uptake similar to the modeled range. The highest uptake, resulting from a simulation with a constant A Redi of 2400 m 2 /s, simulates 15% more historical carbon uptake than a model with A Redi = 400 m 2 /s. A sudden doubling in carbon dioxide produces a 21% range in carbon uptake across the models. Two spatially dependent representations of A Redi produce uptake that lies in the middle of the range of constant values despite predicting very large values in the subtropical gyres. One‐dimensional diffusive models of the type used for integrated assessments can be fit to the simulations, with A Redi accounting for a substantial fraction of the effective vertical diffusion. Such models, however, mask significant regional changes in stratification and biological carbon storage.
Gnanadesikan, Anand↗
The path from litter to soil: Insights into soil C cycling from long-term input manipulation and high-resolution mass spectrometry
The pathways carbon (C) takes from plant litter to soil organic matter (SOM) underlies our understanding of how soil C stocks and microbial decomposition will respond to climate change, and determining whether natural soil C sinks can be enhanced to offset potential losses. Long-term ecosystem-scale litter manipulations and innovations in the molecular characterization of SOM provide a unique opportunity to explore these dynamics. We incubated soils from a 20-year litter-input experiment for 525 days and asked how litter quantity and source (i.e., roots versus aboveground litter) affected soil C cycling, including microbial function and the size and molecular composition of C pools defined by degree of mineral association. Input exclusion led to a 30% loss of soil C, attributable largely to the non-mineral-associated C fraction, and was accompanied by declines in soil C decomposition. The absence of roots led to a shift in the microbial catabolic profile, though there was no evidence that root litter was preferentially stabilized. Carbon did not accumulate under litter addition. However, direct examination of the finest mineral fraction with Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) revealed dramatic changes to the chemical composition of carbon. In particular, lipid content increased proportionally with input addition, and was subsequently mineralized during incubation, indicating that this apparently stable fraction is metabolically active. Moreover, non-metric dimensional scaling (NMS) showed that both litter treatments and incubation caused the molecular composition of SOM to diverge, and explained 79% of the variance in soil respiration. We conclude that the path from litter to soil is more complex than previously thought and mineral-associated SOM thought to be stable may be microbially available.
Reynolds, L L.↗
Evaluation of VVER Reactivity Coefficients in Normal Operating Regimes with Change of External Load
The activity coefficients of a reactor facility with VVER in normal operating regimes associated with a change of the external load are studied. The model used to evaluate the reactivity coefficients in terms of the moderator density and fuel temperature aided by the connected KORSAR/GP code is described. A three-dimensional model of the neutron kinetics and a realistic model of the main regulators are used. Calculations of the reactivity coefficients for a regime with unloading of the turbogenerator and the regime of primary regulation of the power system frequency are studied as test problems. A physical analysis of the results is performed.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Quantum oscillation studies of the nodal line semimetal Ni 3 In 2 S 2-x Se x
Ternary shandite compounds with the general formula T 3 M 2 X 2 (T = Ni, Co, Rh or Pd; M = Sn, In, or Pb; and X = S or Se) have emerged as a large pool of topological semimetals. This family of compounds hosts different topological phases for various combinations of T, M and X. This paper reports the observation of quantum oscillations under the high magnetic fields in Ni 3 In 2 S 2-x Se x single crystals. Angular dependence of oscillation frequency suggests an evolution of the Fermi surface from three-dimensional to two-dimensional on Se substitution for S in Ni 3 In 2 S 2 . Here, the effective mass obtained for each composition by fitting the oscillation amplitude with the Lifshitz-Kosevich formula, shows no significant change, suggesting that the topological phase might be relatively robust against enhanced spin-orbit coupling upon Se doping in Ni 3 In 2 S 2 .
36 MATERIALS SCIENCE↗
Quantifying the Reproducibility of Heart Position During Treatment and Corresponding Delivered Heart Dose in Voluntary Deep Inhalation Breath Hold for Left Breast Cancer Patients Treated With External Beam Radiotherapy
Purpose: Voluntary deep inhalation breath hold (VDIBH) reduces heart dose during left breast irradiation. We present results of the first study performed to quantify reproducibility of breath hold using bony anatomy, heart position, and heart dose for VDIBH patients at treatment table. Methods and Materials: Data from 10 left breast cancer patients undergoing VDIBH whole-breast irradiation were analyzed. Two computed tomography (CT) scans, free breathing (FB) and VDIBH, were acquired to compare dose to critical structures. Pretreatment weekly kV orthogonal images and tangential ports were acquired. The displacement difference from spinal cord to sternum across the isocenter between coregistered planning Digitally Reconstructed Radiographs (DRRs) and kV imaging of bony thorax is a measure of breath hold reproducibility. The difference between bony coregistration and heart coregistration was the measured heart shift if the patient is aligned to bony anatomy. Results: Percentage of dose reductions from FB to VDIBH: mean heart dose (48%, SD 19%, p = 0.002), mean LAD dose (43%, SD 19%, p = 0.008), and maximum left anterior descending (LAD) dose (60%, SD 22%, p = 0.008). Average breath hold reproducibility using bony anatomy across the isocenter along the anteroposterior (AP) plane from planning to treatment is 1 (range, 0-3; SD, 1) mm. Average heart shifts with respect to bony anatomy between different breath holds are 2 {+-} 3 mm inferior, 1 {+-} 2 mm right, and 1 {+-} 3 mm posterior. Percentage dose changes from planning to delivery: mean heart dose (7%, SD 6%); mean LAD dose, ((9%, SD 7%)S, and maximum LAD dose, (11%, SD 11%) SD 11%, p = 0.008). Conclusion: We observed excellent three-dimensional bony registration between planning and pretreatment imaging. Reduced delivered dose to heart and LAD is maintained throughout VDIBH treatment.
62 RADIOLOGY AND NUCLEAR MEDICINE↗
Modular Self-Assembly of Protein Cage Lattices for Multistep Catalysis
The assembly of individual molecules into hierarchical structures is a promising strategy for developing three-dimensional materials with properties arising from interaction between the individual building blocks. Virus capsids are elegant examples of biomolecular nanostructures, which are themselves hierarchically assembled from a limited number of protein subunits. Here, we demonstrate the bio-inspired modular construction of materials with two levels of hierarchy: the formation of catalytically active individual virus-like particles (VLPs) through directed self-assembly of capsid subunits with enzyme encapsulation, and the assembly of these VLP building blocks into three-dimensional arrays. The structure of the assembled arrays was successfully altered from an amorphous aggregate to an ordered structure, with a face-centered cubic lattice, by modifying the exterior surface of the VLP without changing its overall morphology, to modulate interparticle interactions. The assembly behavior and resultant lattice structure was a consequence of interparticle interaction between exterior surfaces of individual particles and thus independent of the enzyme cargos encapsulated within the VLPs. These superlattice materials, composed of two populations of enzyme-packaged VLP modules, retained the coupled catalytic activity in a two-step reaction for isobutanol synthesis. As a result, this study demonstrates a significant step toward the bottom-up fabrication of functional superlattice materials using a self-assembly process across multiple length scales and exhibits properties and function that arise from the interaction between individual building blocks.
36 MATERIALS SCIENCE↗
Three-dimensional view of ultrafast dynamics in photoexcited bacteriorhodopsin
Bacteriorhodopsin (bR) is a light-driven proton pump. The primary photochemical event upon light absorption is isomerization of the retinal chromophore. Here we used time-resolved crystallography at an X-ray free-electron laser to follow the structural changes in multiphoton-excited bR from 250 femtoseconds to 10 picoseconds. Quantum chemistry and ultrafast spectroscopy were used to identify a sequential two-photon absorption process, leading to excitation of a tryptophan residue flanking the retinal chromophore, as a first manifestation of multiphoton effects. We resolve distinct stages in the structural dynamics of the all-trans retinal in photoexcited bR to a highly twisted 13-cis conformation. Other active site sub-picosecond rearrangements include correlated vibrational motions of the electronically excited retinal chromophore, the surrounding amino acids and water molecules as well as their hydrogen bonding network. These results show that this extended photo-active network forms an electronically and vibrationally coupled system in bR, and most likely in all retinal proteins.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Emergent chirality in a polar meron to skyrmion phase transition
Polar skyrmions are predicted to emerge from the interplay of elastic, electrostatic and gradient energies, in contrast to the key role of the anti-symmetric Dzyalozhinskii-Moriya interaction in magnetic skyrmions. Here, we explore the reversible transition from a skyrmion state (topological charge of –1) to a two-dimensional, tetratic lattice of merons (with topological charge of –1/2) upon varying the temperature and elastic boundary conditions in [(PbTiO 3 ) 16 /(SrTiO 3 ) 16 ] 8 membranes. This topological phase transition is accompanied by a change in chirality, from zero-net chirality (in meronic phase) to net-handedness (in skyrmionic phase). We show how scanning electron diffraction provides a robust measure of the local polarization simultaneously with the strain state at sub-nm resolution, while also directly mapping the chirality of each skyrmion. Using this, we demonstrate strain as a crucial order parameter to drive isotropic-to-anisotropic structural transitions of chiral polar skyrmions to non-chiral merons, validated with X-ray reciprocal space mapping and phase-field simulations.
42 ENGINEERING↗
Catalytic Templating Approaches for Three-Dimensional Hollow Carbon/Graphene Oxide Nano-Architectures
We report a catalytic templating method to synthesize well-controlled, three-dimensional (3D) nano-architectures with graphene oxide sheets. The 3D composites are prepared via self-assembly of carbon, GO, and spherical alumina-coated silica (ACS) templates during a catalytic reaction porcess. By changing the GO content, we can systematically tune the architecture from layered composites to 3D hollow structures to microporous materials. The composites show a synergistic effect with significantly superior properties than either pure carbon or r-GO prepared with a significant enhancement to its capacitance at high current density.
composites↗
Optical and magneto-optical properties of one-dimensional magnetized coupled resonator plasma photonic crystals
In this paper, the optical and magneto-optical properties of one-dimensional magnetized coupled resonator plasma photonic crystals have been investigated. We use transfer matrix method to solve our magnetized coupled resonator plasma photonic crystals consist of dielectric and magnetized plasma layers. The results of the change in the optical and magneto-optical properties of structure as a result of the alteration in the structural properties such as thickness, plasma frequency and collision frequency, plasma filling factor, number of resonators and dielectric constant of dielectric layers and external magnetic field have been reported. The main feature of this structure is a good magneto-optical rotation that takes place at the defect modes and the edge of photonic band gap of our proposed optical magnetized plasma waveguide. Our outcomes demonstrate the potential applications of the device for tunable and adjustable filters or reflectors and active magneto-optic in microwave devices under structural parameter and external magnetic field.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Image segmentation of nanoscale Zernike phase contrast X-ray computed tomography images
Zernike phase contrast is a useful technique for nanoscale X-ray computed tomography (CT) imaging of materials with a low X-ray absorption coefficient. It enhances the image contrast by phase shifting X-ray waves to create changes in amplitude. However, it creates artifacts that hinder the use of traditional image segmentation techniques. We propose an image restoration method that models the X-ray phase contrast optics and the three-dimensional image reconstruction method. We generate artifact-free images through an optimization problem that inverts this model. Though similar approaches have been used for Zernike phase contrast in visible light microscopy, this optimization employs an effective edge detection method tailored to handle Zernike phase contrast artifacts. We characterize this optics-based restoration method by removing the artifacts in and thresholding multiple Zernike phase contrast X-ray CT images to produce segmented results that are consistent with the physical specimens. We quantitatively evaluate and compare our method to other segmentation techniques to demonstrate its high accuracy.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Radio emission and orbital motion from the close-encounter star–brown dwarf binary WISE J072003.20–084651.2
We report the detection of radio emission and orbital motion from the nearby star–brown dwarf binary WISE J072003.20–084651.2AB. Radio observations across the 4.5–6.5 GHz band with the Very Large Array identify at the position of the system quiescent emission with a flux density of 15 ± 3 μJy, and a highly polarized radio source that underwent a 2–3 minute burst with peak flux density 300 ± 90 μJy. The latter emission is likely a low-level magnetic flare similar to optical flares previously observed for this source. No outbursts were detected in separate narrow-band Hα monitoring observations. We report new high-resolution imaging and spectroscopic observations that confirm the presence of a co-moving T5.5 secondary and provide the first indications of three-dimensional orbital motion. We used these data to revise our estimates for the orbital period (4.1{sub −1.3}{sup +2.7} year) and tightly constrain the orbital inclination to be nearly edge-on (93.°6{sup +1.°6}{sub −1.°4}), although robust measures of the component and system masses will require further monitoring. The inferred orbital motion does not change the high likelihood that this radio-emitting very low-mass binary made a close pass to the Sun in the past 100 kyr.
79 ASTRONOMY AND ASTROPHYSICS↗