Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Uranium Phases in Contaminated Sediments Below Hanford's U Tank Farm

Macroscopic and spectroscopic investigations (XAFS, XRF and TRLIF) on Hanford contaminated vadose zone sediments from the U-tank farm showed that U(VI) exists as different surface phases as a function of depth below ground surface (bgs). Dominant U(VI) silicate precipitates (boltwoodite and uranophane) were present in shallow-depth sediments (15-16 m bgs). In the intermediate depth sediments (20-25 m bgs), adsorbed U(VI) phases dominated but small amounts of surface precipitates consisting of polynuclear U(VI) surface complex were also identified. The deep depth sediments (> 28 m bgs) showed no signs of contact with tank wastes containing Hanford-derived U(VI), but natural uranium solid phases were observed. Most of the U(VI) was preferentially associated with the silt and clay size fractions and showed strong correlation with Ca, especially for the precipitated U(VI) silicate phase in the shallow depth sediments. Because U(VI) silicate precipitates dominate the U(VI) phases in the shallow depth sediments, macroscopic (bi)carbonate leaching should result in U(VI) releases from both desorption and dissolution processes. Having several different U(VI) surface phases in the Hanford contaminated sediments indicates that the U(VI) release mechanism could be complicated and that detailed characterization of the sediments would be needed to estimate U(VI) fate and transport in vadose zone.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hollow fiber adsorbents for CO{sub 2} removal from flue gas

The nation's pulverized coal infrastructure is aging, and implementation of current retrofit postcombustion capture methods is extremely expensive. This paper describes a technology based on hollow polymeric fibers with sorbent particles embedded in the porous fiber wall to enable postcombustion CO{sub 2} capture via a rapid temperature swing adsorption (RTSA) system. The system takes advantage of the hollow fiber morphology by passing cooling water through the bores during sorption to maximize sorption capacities and steam through the bores during desorption to desorb CO{sub 2} efficiently. The thin-walled hollow fibers offer the advantage of rapid heat and mass transport. To avoid mass transfer between the core and the fiber sheath, a dense lumen layer is used on the interior of the fiber wall. This system has advantages over competing technologies. Specifically, the fiber sorbent contactor minimizes flue gas pressure drop across the bed, while maximizing sorption efficiencies via rapid thermal cycles and low regenerative thermal requirements.

01 COAL, LIGNITE, AND PEAT↗

Observation of an Intermediate to H 2 Binding in a Metal–Organic Framework

Coordinatively unsaturated metal sites within certain zeolites and metal–organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H 2 at the trigonal pyramidal Cu + sites in the metal–organic framework Cu I -MFU- 4 l occurs via the intermediacy of a metastable physisorbed precursor species. In situ powder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Evidence for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. Here, the activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu + coordination environment that enhances p-backbonding with H 2 . Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaction of Formic Acid over Amorphous Manganese Oxide Catalytic Systems: An In Situ Study

The interaction of formic acid with amorphous manganese oxide (AMO) is investigated using in situ photoelectron and infrared spectroscopy techniques. Soft X-ray photoelectron spectroscopy (sXPS) and in situ FTIR illustrate two possible modes of formate bound species at the AMO surface. Two peaks in the IR region from 1340-1390 cm{sup -1} are indicative of formate species bound to the surface in a bidentate configuration. However, a 224 cm{sup -1} band gap between v{sub s}OCO and v{sub as}OCO suggests formate is bound in a bridging configuration. Temperature-programmed desorption studies confirm the formate bound species desorbs as carbon dioxide from the surface at multiple binding sites. At temperatures above 700 K, the presence of K{sup +} {hor_ellipsis} OC complex suggests the bound species interacts at vacant sites related to framework oxygen and cation mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vacuum-Ultraviolet Photoionization and Mass Spectrometric Characterization of Lignin Monomers Coniferyl and Sinapyl Alcohols

The fragmentation mechanisms of monolignols under various energetic processes are studied with jet-cooled thermal desorption molecular beam (TDMB) mass spectrometry (MS), 25 keV Bi3+ secondary ion MS (SIMS), synchrotron vacuum-ultraviolet secondary neutral MS (VUV-SNMS) and theoretical methods. Experimental and calculated appearance energies of fragments observed in TDMB MS indicate that the coniferyl alcohol photoionization mass spectra contain the molecular parent and several dissociative photoionization products. Similar results obtained for sinapyl alcohol are also discussed briefly. Ionization energies of 7.60 eV ? 0.05 eV for coniferyl alcohol and<7.4 eV for both sinapyl and dihydrosinapyl alcohols are determined. The positive ion SIMS spectrum of coniferyl alcohol shares few characteristic peaks (m/z = 137 and 151) with the TDMB mass spectra, shows extensive fragmentation, and does not exhibit clear molecular parent signals. VUV-SNMS spectra, on the other hand, are dominated by the parent ion and main fragments also present in the TDMB spectra. Molecular fragmentation in VUV-SNMS spectra can be reduced by increasing the extraction delay time. Some features resembling the SIMS spectra are also observed in the desorbed neutral products. The monolignol VUV-SNMS peaks shared with the TDMB mass spectra suggest that dissociative photoionization of ion-sputtered neutral molecules predominate in the VUV-SNMS mass spectra, despite the extra internal energy imparted in the initial ion impact. The potential applications of these results to imaging mass spectrometry of bio-molecules are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density functional theory study of acetaldehyde hydrodeoxygenation on MoO3

Periodic spin-polarized density functional theory calculations were performed to investigate acetaldehyde (CH3CHO) hydrodeoxygenation on the reduced molybdenum trioxide (MoO3) surface. The perfect O-terminated α-MoO3(010) surface is reduced to generate an oxygen defect site in the presence of H2. H2 dissociatively adsorbs at the surface oxygen sites forming two surface hydroxyls, which can recombine into a water molecule weakly bound at the Mo site. A terminal oxygen (Ot) defect site thus forms after water desorption. CH3CHO adsorbs at the O-deficient Mo site via either the sole O-Mo bond or the O-Mo and the C-O double bonds. The possible reaction pathways of the adsorbed CH3CHO with these two configurations were thoroughly examined using the dimer searching method. Our results show that the ideal deoxygenation of CH3CHO leading to ethylene (C2H4) on the reduced MoO3(010) surface is feasible. The adsorbed CH3CHO first dehydrogenate into CH2CHO by reacting with a neighboring terminal Ot. The hydroxyl (OtH) then hydrogenates CH2CHO into CH2CH2O to complete the hydrogen transfer cycle with an activation barrier of 1.39 eV. The direct hydrogen transfer from CH3CHO to CH2CH2O is unlikely due to the high barrier of 2.00 eV. The produced CH2CH2O readily decomposes into C2H4 that directly releases to the gas phase, and regenerates the Ot atom on the Mo site. As a result, the reduced MoO3(010) surface is reoxidized to the perfect MoO3(010) surface after CH3CHO deoxygenation. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ethylene Glycol Adsorption and Reaction over CeOX(111) Thin Films

This study reports the interaction of ethylene glycol with well-ordered CeO{sub x}(111) thin film surfaces. Ethylene glycol initially adsorbs on fully oxidized CeO{sub 2}(111) and reduced CeO{sub 2-x}(111) through the formation of one C-O-Ce bond and then forms a second alkoxy bond after annealing. On fully oxidized CeO{sub 2}(111) both recombination of ethylene glycol and water desorption occur at low temperature leaving stable -OCH{sub 2}CH{sub 2}O- (ethylenedioxy) intermediates and oxygen vacancies on the surface. This ethylenedioxy intermediate goes through C-C bond scission to produce formate species which then react to produce CO and CO{sub 2}. The formation of water results in the reduction of the ceria. On a reduced CeO{sub 2-x}(111) surface the reaction selectivity shifts toward a dehydration process. The ethylenedioxy intermediate decomposes by breaking a C-O bond and converts into an enolate species. Similar to the reaction of acetaldehyde on reduced CeO{sub 2-x}(111), the enolate reacts to produce acetaldehyde, acetylene, and ethylene. The loss of O from ethylene glycol leads to a small amount of oxidation of the reduced ceria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

About the Barriers to Reaction of CCl4 with HFeOH and FeCl2

The reactivity of iron nanoparticles in aqueous environments has received considerable attention due to their potential utilization in environmental remediation technologies. As part of a broader program aiming at an improved understanding of the mechanisms involved in the degradation of harmful chlorocarbons, joint experimental and computational studies of model systems were initiated. We previously reported on the reaction of one and two Fe atoms reactions with carbon tetrachloride (CCl4) in direct mimic of “atom-dropping” experiments, with insights into the formation of novel iron-carbon-chlorine complexes, their structures and possible reaction mechanisms. Increasing the level of complexity, we report here on the modeling of the reaction of HFeOH and CCl4 as companion research of recent ultra high vacuum experiments of the reaction of Fe with water and CCl4. HFeOH is a stable molecular species formed in the reaction of Fe with H2O. Experimentally the (Fe, H2O, CCl4) system showed no reactivity up to the desorption temperature of CCl4. Electron correlated CCSD(T) calculations (at DFT(B3LYP) optimized structures) indicated an energy barrier to reactivity of 24.5 kcal/mol following the formation of a stable ( 7.5 kcal/mol) long-range precursor complex. This finding is consistent with the lack of experimentally detected reaction products. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymerization of Formaldehyde and Acetaldehyde on Ordered (WO3)3 Films on Pt(111)

Polymerization of formaldehyde, H2CO, and acetaldehyde, CH3CHO, was studied under ultrahigh vacuum conditions on a model catalyst consisting of an ultra-thin WO3 film supported on Pt(111). The onset of polymerization is observed at very low temperatures of 70 and 80 K for H2CO and CH3CHO, respectively, as documented by the evolution of the IRAS spectra. The amount of polymer increases with increasing coverage and saturates at 5 and 8 monolayers (ML) for the H2CO and CH3CHO multilayer films that are thicker than 10 and 15 ML, respectively. Upon heating, the polymers decompose around 250 and 190 K for H2CO and CH3CHO, respectively, as evidenced mass spectrometrically by the desorption of their monomers and oligomers into the gas phase. The heats of H2CO and CH3CHO sublimation and polymerization determined based on our experiments are in good agreement with previously published values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using a surface-sensitive chemical probe and a bulk structure technique to monitor the γ- to θ-Al2O3 phase transformation

In this work, we investigated the phase transformation of γ Al2O3 to θ Al2O3 by ethanol TPD and XRD. Ethanol TPD showed remarkable sensitivity toward the surface structures of the aluminas studied. Maximum desorption rates for the primary product of ethanol adsorption, ethylene, were observed at 225°C, 245°C and 320°C over γ-, θ-, and α-Al2O3, respectively. Ethanol TPD over a γ Al2O3 sample calcined at 800 °C clearly show that the surface of the resulting material possesses θ-alumina characteristics, even though only the γ-alumina phase was detected by XRD. These results strongly suggest that the γ-to-θ phase transformation of alumina initiates at oxide particle surfaces. The results obtained are also consistent with our previous finding that the presence of penta-coordinated Al3+ sites, formed on the (100) facets of the alumina surface, are strongly correlated with the thermal stability of γ-alumina.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of Absolute Coverages for Small Aliphatic Alcohols on TiO2(110)

The absolute coverages of water and small aliphatic alcohols (C1-C4) were determined on TiO{sub 2}(110) using a combination of temperature programmed desorption and liquid nitrogen cooled quartz crystal microbalance measurements. The absolute saturation coverages of water on Ti{sup 4+} and bridging oxygen (O{sub b}) sites are found to be equal to 1 monolayer with respect to the number of Ti{sup 4+} and/or O{sub b} sites (1 ML {triple_bond} 5.2 x 10{sup 14} cm{sup 2}) in a good agreement with prior studies. The saturation coverages of primary alcohols on Ti{sup 4+} sites are found to be approximately constant and equal to 0.77 ML. This indicates that the increasing length of the alkyl chains does not contribute to additional steric hindrance. Additional steric hindrance is observed with increasing number of chains as shown for secondary alcohols and tertiary t-butanol where the coverage decreases to 0.62 and 0.44 ML, respectively. On O{sub b} rows, a monotonic decrease of the alcohol coverage is observed for both increasing length of the alkyl chains and the chain number.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Chemistry of Trimethyl Phosphate on α-Fe2O3

The chemistry of trimethyl phosphate (TMP) was examined on the (012) crystallographic face of hematite (α-Fe2O3) using temperature programmed desorption (TPD), high resolution electron energy loss spectroscopy (HREELS), static secondary ion mass spectrometry (SSIMS) and Auger electron spectroscopy (AES). TMP binds to Fe3+ sites on the clean α-Fe2O3(012) surface through lone pairs on the P=O oxygen atom. A small portion of adsorbed TMP desorbs without decomposition, however, the majority of adsorbed TMP decomposes in a two step process on the clean surface. The first step, occurring at or below room temperature (RT), likely involves displacement or substitution of one –OCH3 group to form surface methoxy groups and adsorbed dimethyl phosphate (DMP). In the second step, DMP decomposes above 500 K to a 1:1 ratio of gaseous methanol and formaldehyde with phosphate left on the surface. Identification of these steps was confirmed using the chemistry of methanol on the clean surface. Coadsorption of TMP and water led to a small degree of hydrolysis between these two molecules in the multilayer, but no significant change in the chemistry on the surface. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

10 SYNTHETIC FUELS↗

Preparation, Characterization, and Catalytic Properties of Tungsten Trioxide Cyclic Trimers on FeO(111)/Pt(111)

The structure and catalytic activity of tungsten oxide clusters formed via sublimation of monodispersed cyclic (WO{sub 3}){sub 3} onto FeO(111)/Pt(111) surface has been studied by a combination of scanning tunneling microscopy (STM), X-ray photoemission spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRAS), temperature programmed desorption (TPD) and density function theory (DFT). After the (WO{sub 3}){sub 3} sublimation, STM images reveal new features composed of three bright maxima arranged in triangular configurations with the distances of {approx}10 {angstrom}. These distances are significantly larger compared to the size of (WO{sub 3}){sub 3} indicating that the clusters dissociated. This conclusion is corroborated by DFT calculations showing that the cluster dissociation into the surface-bound WO{sub 3} monomers is endothermic and kinetically feasible at 300 K. The dissociation is accompanied by significant FeO(111) rearrangements with the Fe ions being pulled on top of the surface and bonded to the WO{sub 3} fragments. Both surface spectroscopies (XPS and IRAS) and calculations indicate that the W ions in the WO{sub 3} monomers remain in (6+) oxidation state and possess terminal W=O groups. Our TPD studies show that this system do not efficiently catalyze alcohol dehydration. This inactivity is explained based on the reaction mechanism calculated by DFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Nanoporous WO3 Films Grown via Ballistic Deposition

We report on the preparation and characterization of high surface area, supported nanoporous tungsten oxide films prepared under different conditions on polished polycrystalline Ta and Pt(111) substrates via direct sublimation of monodispersed gas phase of cyclic (WO3)3 clusters. Scanning Electron Microscopy and Transmission Electron Microscopy were used to investigate the film morphology on a nanometer scale. The films consist of arrays of separated filaments that are amorphous. The chemical composition and the thermal stability of the films were investigated by means of X-ray Photoelectron Spectroscopy. The surface area and the distribution of binding sites on the films are measured as functions of growth temperature, deposition angle, and annealing conditions using temperature programmed desorption of Kr. Films deposited at 20 K and at an incident angle of 65{sup o} from substrate normal display the greatest specific surface area of {approx}560 m2/g.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Importance of Diffusion in Methanol Photochemistry on TiO2(110)

The photoactivity of methanol on the rutile TiO2(110) surface is shown to depend on the ability of methanol to diffuse on the surface and find sites active for its thermal dissociation to methoxy. Temperature programmed desorption (TPD) results show that the extent of methanol photodecomposition to formaldehyde is negligible on the clean TiO2(110) surface at 100 K due to a scarcity of sites that can convert (photoinactive) methanol to (photoactive) methoxy. The extent of photoactivity at 100 K significantly increases when methanol is coadsorbed with oxygen, however only those molecules able to adsorb near (next to) a coadsorbed oxygen species are active. Preannealing coadsorbed methanol and oxygen to above 200 K prior to UV irradiation results in a significant increase in photoactivity. Scanning tunneling microscopy (STM) images clearly show that the advent of increased photoactivity in TPD correlates with the onset of methanol diffusion along the surface’s Ti4+ rows at ~200 K. These results demonstrate that optimizing thermal processes (such as diffusion or proton transfer reactions) can be critical to maximizing photocatalytic reactivity on TiO2 surfaces. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle under contract DEAC05-76RL01830. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

diffusion↗

Nonthermal Water Splitting on Rutile TiO2: Electron-Stimulated Production of H-2 and O-2 in Amorphous Solid Water Films on TiO2(110)

Electron-stimulated desorption (ESD) of H2, O2 and H2O from 0 - 60 ML films of amorphous solid water (ASW) adsorbed on TiO2(110) are investigated as function of film thickness and isotopic composition. For 100 eV incident electrons, both the H2 and O2 ESD yields have maxima when the ASW coverage is ~ 20 monolayer (ML), while the H2O ESD yield increases monotonically with water coverage. All the products reach a coverage-independent yield above 40 - 50 ML. Experiments using isotopically layered films of H2O and D2O demonstrate that the molecular hydrogen is produced in reactions that occur preferentially at or near both the ASW/TiO2 interface and the ASW/vacuum interface. However, electronic excitations or ionic defects created within the interior of the ASW films by the energetic electrons can subsequently migrate to the interfaces where they initiate reactions. Electron irradiation of ASW films results in the formation of bridge-bonded hydroxyls on the TiO2(110). These hydroxyls do not contribute to the H2 produced near the ASW/TiO2 interface. Instead, the results suggest that this H2 is produced from a stable precursor, trapped near the substrate. The proposed mechanism for the H2 production near the ASW/TiO2(110) interface is supported by a kinetic model that semi-quantitatively reproduces the main features of the non-thermal reactions.

08 HYDROGEN↗

A Comparison of the Reactivity of Pd Supported on ZnO(10(1)over-bar0) and ZnO(0001)

The dependence of ZnO surface structure on Pd/ZnO catalyzed methanol decomposition was investigated using model catalysts consisting of Pd films and particles on ZnO and ZnO(0001) single crystals. XPS studies showed that vapor-deposited Pd grows two dimensionally at 300 K and agglomerates into particles upon heating. Temperature programmed desorption (TPD) experiments showed that CO adsorption was weaker on Pd/ZnO(0001) relative to Pd/ZnO and that PdZn alloy formation was more facile on the ZnO(0001) compared to ZnO . Large differences in the amount of CO produced during methanol TPD on the Pd/ZnO(0001) and Pd/ZnO samples was also observed and attributed to the presence of highly active sites at the Pd-ZnO(0001) interface. Comparisons to high surface area Pd/ZnO catalysts indicate that similar structural effects may also influence their reactivity.

10 SYNTHETIC FUELS↗