Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Theory of low frequency noise transmission through turbines

Improvements of the existing theory of low frequency noise transmission through turbines and development of a working prediction tool are described. The existing actuator-disk model and a new finite-chord model were utilized in an analytical study. The interactive effect of adjacent blade rows, higher order spinning modes, blade-passage shocks, and duct area variations were considered separately. The improved theory was validated using the data acquired in an earlier NASA program. Computer programs incorporating the improved theory were produced for transmission loss prediction purposes. The programs were exercised parametrically and charts constructed to define approximately the low frequency noise transfer through turbines. The loss through the exhaust nozzle and flow(s) was also considered.

Matta, R. K.↗
NASA NTRS1981

Infrared and optical observations of the hydrogen lines in quasars

Infrared and optical spectrophotometric observations of the hydrogen lines in a sample of 16 quasars are discussed. The addition of these observations to previously published observations of hydrogen lines in quasars brings to 12 the number of quasars for which the P-alpha/H-alpha/H-beta line ratios have been measured and to nine the number of quasars for which the L-alpha/H-alpha line ratio has been measured. It is noted that the P-alpha/H-alpha ratios in low-redshift quasars are distributed around the case B value with a tendency toward values lower than that predicted by case B. The H-alpha/H-beta values in these same quasars are for the most part greater than the case B value. The tendency in the P-alpha/H-alpha/H-beta ratios is for the P-alpha/H-alpha ratio to decrease as the H-alpha/H-beta ratio increases. The decrease of the P-alpha/H-alpha ratio with increasing H-alpha/H-beta ratio is the most significant correlation obtained from the present data that any valid model of the line-emitting regions must explain. The low values of the L-alpha/H-alpha in comparison with the case B value are confirmed for a large sample of high-redshift quasars. L-alpha is seemingly destroyed rather than H-alpha being enhanced. It is concluded that reddening external to the emission-line regions cannot satisfactorily explain all the observed hydrogen line ratios.

Soifer, B. T.↗
NASA NTRS1981

Measurement of fault latency in a digital avionic miniprocessor

The results of fault injection experiments utilizing a gate-level emulation of the central processor unit of the Bendix BDX-930 digital computer are presented. The failure detection coverage of comparison-monitoring and a typical avionics CPU self-test program was determined. The specific tasks and experiments included: (1) inject randomly selected gate-level and pin-level faults and emulate six software programs using comparison-monitoring to detect the faults; (2) based upon the derived empirical data develop and validate a model of fault latency that will forecast a software program's detecting ability; (3) given a typical avionics self-test program, inject randomly selected faults at both the gate-level and pin-level and determine the proportion of faults detected; (4) determine why faults were undetected; (5) recommend how the emulation can be extended to multiprocessor systems such as SIFT; and (6) determine the proportion of faults detected by a uniprocessor BIT (built-in-test) irrespective of self-test.

Mcgough, J. G.↗
NASA NTRS1981

Flight test method for the determination of reciprocating engine cooling requirements

It is pointed out that the effective cooling of aircraft reciprocating engines is still a problem area for the general aviation industry. Miley et al. (1981) have reported the results of an investigation of problems associated with cooling and installation aerodynamics. A description is given of a flight test procedure which was developed in connection with the considered investigation. It is shown that the test procedure provides valid cooling requirements data for a particular installation. The data are in terms of easily measurable parameters. The employment of the test procedure, which is based on the NACA cooling correlation method, can lead to more effective cooling installations and the solution of existing cooling problems.

Miley, S. J.↗
NASA NTRS1982

Analytical solution for the drift behavior of Dynamics Explorer-B

The Dynamics Explorer (DE) mission was designed to explore the earth's magnetosphere, ionosphere, and plasmasphere. The DE mission employs two spacecraft, including DE-A and DE-B. The spacecraft were launched from the Western Test Range on Aug. 3, 1981, onboard the same Delta launch vehicle. The two spacecraft were placed in a coplanar polar orbit, with DE-A in a high altitude orbit (perigee = 570 km and apogee = 23174 km) and DE-B in a low altitude orbit (perigee = 309 km and apogee = 1013 km). In the present investigation, an attempt has been made to validate the flight data for DE-B with analytic and simulation results. The external torques acting on the spacecraft are represented in terms of tractable mathematical functions. A piecewise linear model of the superrotation of the upper atmosphere is assumed. The effect of individual torques on the long-term pitch axis motion is investigated using analytic and simulation methods. The results are found to be in very good agreement with the available flight data.

Sellappan, R. G.↗
NASA NTRS1982

The magnetic flux in the quiet sun network

Direct magnetic measurements are used to confirm that the Ca II K line emission from the quiet sun network does not vary with the 11 year cycle (White and Livingston, 1981). As the K emission intensity is correlated with magnetic field strength, magnetic flux measurements are valid for comparison. Data were taken from the full-disk Mount Wilson daily magnetograms, and the aperture was decreased from 17.5 to 12.5 during the interval 1970 through 1980. Measurements are restricted to the latitude zones centered on + or - 1.7 degrees. The mean total flux in the + or - 15.3 degree zones increased by a factor of 10 between activity minimum and maximum, and the quiet sun flux shows no variation, thus confirming White and Livingston's (1981) result. In order for the amplitude of the quiet sun magnetic flux to remain constant, a balance between increasing and decreasing factors must exist, and the primary factor in this balance is the rate of destruction of the quiet sun flux.

Labonte, B. J.↗
NASA NTRS1982

The International Ozone Intercomparison Program

The World Meteorological Organization (WMO) has endorsed a number of intercomparison project activities in recent years as a part of its Global Ozone Research and Monitoring Project. The present investigation is concerned with an intercomparison of rocket borne measurement techniques in continuation of that overall effort. The objectives of this investigation were to compare the performance of rocket borne instruments, via a set of simultaneous intercomparisons of various rocket instruments under at least two sets of conditions. In order to accomplish the objectives and to aid in validating the historical data, six daytime sensors from each participant were flown. In addition, two of the participants (Australia and U.S.) provided nighttime sensor measurements. Attention is given to Wallops Flight Center instrumentation and launch support, the Triad Series, The Morning Series, and the Nighttime Series.

Gurkin, L. W.↗
NASA NTRS1982

Evaluating software development by analysis of changes: The data from the software engineering laboratory

An effective data collection methodology for evaluating software development methodologies was applied to four different software development projects. Goals of the data collection included characterizing changes and errors, characterizing projects and programmers, identifying effective error detection and correction techniques, and investigating ripple effects. The data collected consisted of changes (including error corrections) made to the software after code was written and baselined, but before testing began. Data collection and validation were concurrent with software development. Changes reported were verified by interviews with programmers.

Source record↗
NASA NTRS1983

Organizing Space Shuttle parametric data for maintainability

A model of organization and management of Space Shuttle data is proposed. Shuttle avionics software is parametrically altered by a reconfiguration process for each flight. As the flight rate approaches an operational level, current methods of data management would become increasingly complex. An alternative method is introduced, using modularized standard data, and its implications for data collection, integration, validation, and reconfiguration processes are explored. Information modules are cataloged for later use, and may be combined in several levels for maintenance. For each flight, information modules can then be selected from the catalog at a high level. These concepts take advantage of the reusability of Space Shuttle information to reduce the cost of reconfiguration as flight experience increases.

Angier, R. C.↗
NASA NTRS1984

Advanced laser stratospheric monitoring systems analyses

This report describes the software support supplied by Systems and Applied Sciences Corporation for the study of Advanced Laser Stratospheric Monitoring Systems Analyses under contract No. NAS1-15806. This report discusses improvements to the Langley spectroscopic data base, development of LHS instrument control software and data analyses and validation software. The effect of diurnal variations on the retrieved concentrations of NO, NO2 and C L O from a space and balloon borne measurement platform are discussed along with the selection of optimum IF channels for sensing stratospheric species from space.

Larsen, J. C.↗
NASA NTRS1985

Measurement of Seebeck coefficient using a light pulse

A high-temperature (1900 K) Seebeck coefficient apparatus is described in which small thermal gradients are generated in a sample by light pulses transmitted via light pipes. By employing an analog subtraction circuit, the Seebeck coefficient is displayed directly on an X-Y recorder. This technique presents a convenient, accurate, and rapid method for measuring the Seebeck coefficient in highly doped semiconductors as a function of temperature. The nature of the resulting display (X-Y recording) is a valuable tool in determining validity of the data. A straight line results (i.e., a minimum of hysteresis) only if all potential experimental errors are minimized. Under these conditions, the error of measurements of the Seebeck coefficient is estimated to be less than + or - 1 percent.

Wood, C.↗
NASA NTRS1986

Transonic Navier-Stokes wing solutions using a zonal approach. Part 2: High angle-of-attack simulation

A computer code is under development whereby the thin-layer Reynolds-averaged Navier-Stokes equations are to be applied to realistic fighter-aircraft configurations. This transonic Navier-Stokes code (TNS) utilizes a zonal approach in order to treat complex geometries and satisfy in-core computer memory constraints. The zonal approach has been applied to isolated wing geometries in order to facilitate code development. Part 1 of this paper addresses the TNS finite-difference algorithm, zonal methodology, and code validation with experimental data. Part 2 of this paper addresses some numerical issues such as code robustness, efficiency, and accuracy at high angles of attack. Special free-stream-preserving metrics proved an effective way to treat H-mesh singularities over a large range of severe flow conditions, including strong leading-edge flow gradients, massive shock-induced separation, and stall. Furthermore, lift and drag coefficients have been computed for a wing up through CLmax. Numerical oil flow patterns and particle trajectories are presented both for subcritical and transonic flow. These flow simulations are rich with complex separated flow physics and demonstrate the efficiency and robustness of the zonal approach.

Chaderjian, N. M.↗
NASA NTRS1986

Calculation of convective heating on proposed aeroassist flight experiment vehicle

Convective heating calculations of a NASA aeroassist flight experiment (AFE) configuration consisting of a blunted, elliptic cone raked off at the base, and fitted with a skirt-type afterbody with a generous corner radius, are presented. The HALIS inviscid flowfield code is used to supply edge properties to an approximate three-dimensional boundary-layer method to calculate the surface heating. Calculations at Mach number 9.86 and approximate Reynolds number of 500,000, for angles of attack from -10 to 10 degrees, are in general good agreement with Langley 31-inch Mach 10 Tunnel experimental data. The results validate the application of the present overall AFE configuration heating pattern heating contours to aeroassist orbital transfer vehicle heating distribution determinations.

Hamilton, H. H., II↗
NASA NTRS1986

Transonic Navier-Stokes wing solutions using a zonal approach. Part 2: High angle-of-attack simulation

A computer code is under development whereby the thin-layer Reynolds-averaged Navier-Stokes equations are to be applied to realistic fighter aircraft configurations. This transonic Navier-Stokes code (TNS) utilizes a zonal approach in order to treat complex geometries and satisfy in-core computer memory constraints. The zonal approach was applied to isolated wing geometries in order to facilitate code development. The TNS finite difference algorithm, zonal methodology, and code validation with experimental data is addressed. Also addressed are some numerical issues such as code robustness, efficiency, and accuracy at high angles of attack. Special free-stream-preserving metrics proved an effective way to treat H-mesh singularities over a large range of severe flow conditions, including strong leading edge flow gradients, massive shock induced separation, and stall. Furthermore, lift and drag coefficients were computed for a wing up through CLmax. Numerical oil flow patterns and particle trajectories are presented both for subcritical and transonic flow. These flow simulations are rich with complex separated flow physics and demonstrate the efficiency and robustness of the zonal approach.

Chaderjian, Neal M.↗
NASA NTRS1987

The Radar Ocean-Wave Spectrometer

The scanning-beam Radar Ocean-Wave Spectrometer (ROWS) technique is described. The derivation of a spectrum for the reflectivity modulation as a function of range is examined. The usefulness of the ROWS technique was initially validated using aircraft data obtained in 1978 with the GSFC Ku-band pulse-compression radar; additional examples of aircraft data which verify the effectiveness of the ROWS technique are presented. The development of a ROWS mode for Spectrasat is discussed. Consideration is given to the incidence angle, twin beam option for cross-section roll-off and wind vector determination, rotation rate, antenna and footprint dimensions, integration time, sphericity effects, and a processor configuration. A design for the ROWS-mode time-domain processor on Spectrasat is proposed. The performance of the system is evaluated, and it is determined that the system performs well.

Jackson, Frederick C.↗
NASA NTRS1987

High resolution upwind schemes for the three-dimensional incompressible Navier-Stokes equations

Based on flux-difference splitting, implicit high resolution schemes are constructed for efficient computations of steady-state solutions to the three-dimensional, incompressible Navier-Stokes equations in curvilinear coordinates. These schemes use first-order accurate Euler backward-time differencing and second-order central differencing for the viscous shear fluxes. Up to third-order accurate upwind differencing is achieved through a reconstruction of the solution from its cell averages. The reconstruction is accomplished by linear interpolation, where the node stencils are selected such that in regions of smooth solution the flow is highly resolved while spurious oscillations in regions of rapid changes in gradient are still suppressed. Fairly rapid convergence to steady-state solutions is attained with a completely vectorizable hybrid time-marching method. Flows around a sharp-edged delta wing are computed with the maximum accuracy of the upwind-differencing restricted to first-, second-, and third-order, to illustrate the effect of accuracy on the global and on the local vortical flow fields. The results are validated with experimental data.

Hartwich, PETER-M.↗
NASA NTRS1987

Inlets, ducts and nozzles

The internal fluid mechanics research program in inlets, ducts, and nozzles is described. The program consists of a balanced effort between the development of computational tools and the conduct of experimental research. The experiments are designed to better understand the fluid flow physics, to develop new or improved flow models, and to provide benchmark quality data sets for validation of the computational methods. The inlet, duct, and nozzle research program is described according to three major classifications of flow phenomena: highly three-dimensional flow fields; shock-boundary layer interactions; and shear layer control. Specific examples of current and future elements of the research program are described for each of these phenomena. In particular, the highly three-dimensional flow field phenomena is highlighted by describing the computational and experiemental research program in transition ducts having a round-to-rectangular area variation. In the case of shock-boundary layer interactions, the specific details of research for normal shock-boundary layer interactions are described. For shear layer control research in vortex generators and the use of aerodynamic excitation for enhancement of the jet mixing process are described. Future research in inlets, ducts, and nozzles will include more emphasis on three-dimensional full Navier-Stokes methods and corresponding experiments designed to concentrate on the appropriate three-dimensional fluid flow physics.

Abbott, John M.↗
NASA NTRS1988

Design and dynamic testing of an instrumented spacecraft component

Details relating to the design and subsequent vibration and shock tests of a spacecraft component for a severe vibration and shock environment are presented. The design process and analysis method involve the use of finite element analysis coupled with the Modal Strain Energy method with risk graphs to determine the adequacy of the design. The vibration levels experienced by box parts are reduced by the application of passive constrained layer viscoelastic treatments that significantly improve component reliability. All significant internal components were fully instrumented in both the random vibration and shock tests, the latter being done on a mechanical impact pyro simulator. Correlation between analysis and test data is good, validating the modeling and analysis techniques.

Dwyer, Thomas J.↗