Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Field-Dependent Ionic Conductivities from Generalized Fluctuation-Dissipation Relations

We derive a relationship for the electric field dependent ionic conductivity in terms of fluctuations of time integrated microscopic variables. We demonstrate this formalism with molecular dynamics simulations of solutions of differing ionic strength with implicit solvent conditions and molten salts. These calculations are aided by a novel nonequilibrium statistical reweighting scheme that allows for the conductivity to be computed as a continuous function of the applied field. In strong electrolytes, we find the fluctuations of the ionic current are Gaussian, and subsequently, the conductivity is constant with applied field. In weaker electrolytes and molten salts, we find the fluctuations of the ionic current are strongly non-Gaussian, and the conductivity increases with applied field. Furthermore, this nonlinear behavior, known phenomenologically for dilute electrolytes as the Onsager-Wien effect, is general and results from the suppression of ionic correlations at large applied fields, as we elucidate through both dynamic and static correlations within nonequilibrium steady states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong anharmonicity dictates ultralow thermal conductivities of type-I clathrates

Type-I clathrate solids have attracted significant interest due to their ultralow thermal conductivities and sub- sequent promise for thermoelectric applications, yet the mechanisms underlying these properties are not well understood. Here, we extend the framework of vibrational dynamical mean-field theory (VDMFT) to calculate temperature-dependent thermal transport properties of solids using a many-body Green’s function approach. When applied to a coarse-grained description of 𝑋 8 Ga 16 Ge 30 , where 𝑋= Ba, Sr, we find that nonresonant scattering between cage acoustic modes and rattling modes leads to a reduction of acoustic phonon lifetimes and thus thermal conductivities. Moreover, we find that the moderate temperature dependence of conductivities above 300 K, which is consistent with experimental measurements, cannot be reproduced by textbook perturbation theory calculations, which predict a 𝑇 −1 dependence. Therefore, we suggest that nonperturbative anharmonic effects, including four- and higher-phonon scattering processes, are responsible for the ultralow thermal conductivities of type-I clathrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conceptual Design of a Conduction-Cooled Superconducting Undulator

In superconducting undulators (SCUs) that are currently operating at the Advanced Photon Source, the undulator magnets are indirectly cooled with liquid helium penetrating through channels in the magnet cores. The liquid helium is stored in a tank that is cooled by cryocoolers. However, a cryogen-free version of a superconducting undulator in which the undulator magnets are conduction-cooled is also possible, as has been realized in the SCUs developed at ANKA. We are currently working on a conceptual design of a conduction-cooled planar superconducting undulator. The measured load lines of cryocoolers and the measured thermal conductance of various thermal links are used in the thermal analysis. Also, various materials for the undulator magnet cores are being considered. This paper reports the thermal design of a conduction-cooled planar SCU.

cryocooler↗

Study on Conduction Cooling of Superconducting Magnets for the ILC Main Linac

In the main linac of the International Linear Collider (ILC), superconducting magnets for beam focusing and steering will be located periodically in superconducting RF (SRF) cavity string for beam acceleration in common cryomodules. A concept of conduction cooling of the combined-functioned, splittable superconducting magnets has been proposed and investigated to adapt much different features and to meet different requirements for the superconducting magnet and SRF cavity in fabrication, assembly, and operation. It is required to integrate the superconducting magnet after the SRF cavity string assembly which completed under an ultra-clean environment. The magnet must be conductively cooled down through thermal links to a liquid helium supply pipe. According to this concept, a model magnet development was carried out in cooperation with Fermilab and KEK, and has been demonstrated in KEK superconducting RF test facility (STF). In addition, an important issue has been recently identified. High gradient SRF cavities naturally emit field emission electron flux from the inner surface, so-called dark current. It may pass through the subsequent SRF cavity string and penetrate into the superconducting magnets placed downstream. It may heat up the superconducting coils, and may cause a quench. Therefore, further study on reliable conduction cooling and to secure the superconducting magnet operation with a keeping sufficient safety margin is quite essential. In this paper, we report the installation, the improvement achieved in STF, and the R&D progress in the study on the conduction cooling of the superconducting magnet for the ILC main linac.

43 PARTICLE ACCELERATORS↗

Effect of Strain on the Resistivity and Thermal Conductivity of High Purity Niobium

High purity niobium (Nb) is a technologically important material for large-scale accelerator and nano-scale quantum computing applications in microwave frequency range. The high thermal conductivity and low resistivity of Nb are critical to the high performance at temperature range of 0.01–4.0 K. The presence of interstitials such as O, N, H, and C act as scattering centers and alter the mean free path, reducing resistivity and thermal conductivity, and contributing significantly to Nb's thermal performance for temperatures of 2.0 K and above. The residual resistivity ratio (RRR), defined as the ratio of the normal state resistivity at 300 K to that at 4.2 K (Nb, T c = 9.2 K), is an accepted direct estimate of the impurity content of fully recrystallized Nb. Complete re-crystallization of Nb is challenging unless very high temperatures are employed, which is often impractical, hence, in practice, dislocation and dislocation structures impact the thermal performance of Nb due to strong phonon scattering contributions. Furthermore, this paper reports on the degradation of thermal conductivity and RRR of high purity Nb large grain, single crystal with fixed impurity, varying strain, and dislocation content levels. Experimental thermal conductivity data fits the Boltzmann transport equation incorporating dislocation density.

36 MATERIALS SCIENCE↗

Thermal conductivity studies of CdZnTe with varying Te excess

Cadmium Zine Telluride (CZT) has been extensively studied as a room temperature semiconductor gamma radiation detector. CZT continues to show promise as a bulk and pixelated gamma spectrometer with less than one percent energy resolution; however the fabrication costs are high. Improved yields of high quality, large CZT spectroscopy grade crystals must be achieved. CZT is grown by the Traveling Heater Method (THM) with a Te overpressure to account for vaporization losses. This procedure creates Te rich zones. During growth, boules will often cleave limiting the number of harvestable crystals. As a result, crystal growth parameter optimization was evaluated by modeling the heat flow within the system. Interestingly, Cadmium Telluride (CdTe) is used as a thermal conductivity surrogate in the absence of a thorough study of the CZT thermal properties. The current study has measured the thermal conductivity of CZT pressed powders with varying Te concentrations from 50-100% over 25-800°C to understand the variation in this parameter from CdTe. Cd0.9Zn0.1Te1.0 is the base CZT (designated 50%). CZT exhibits a thermal conductivity of nearly 1 W/mK, an order of magnitude greater than CdTe. Lastly, the thermal conductivity decreased with increasing Te concentration.

36 MATERIALS SCIENCE↗

Neutron diffraction investigation of the evolution of the crystal structure of oxygen-conducting solid solutions (Yb{sub 1-x}Ca{sub x}){sub 2}Ti{sub 2}O{sub 7} (x = 0, 0.05, 0.10)

The crystal structure of pyrochlore-like solid solutions (Yb{sub 1-x}Ca{sub x}){sub 2}Ti{sub 2}O{sub 7} (x = 0, 0.05, 0.10) synthesized by high-temperature annealing of mechanically activated initial oxides at temperatures of 1300-1500 deg. C is studied using neutron diffraction. It is found that the Ca{sup 2+} cations are located in the ytterbium sublattice, which apparently favors the splitting of one of the oxygen sublattices [O(2) (48f)] of the pyrochlore structure: the decrease in the occupancy of this sublattice is accompanied by the formation of a new sublattice O(3) (8b), whereas the other oxygen sublattice O(1) (8a) remains unchanged. This rearrangement of the anions in the oxygen subsystem due to the incorporation of an alkaline-earth cation explains the high ionic conductance ({approx}0.2 S/cm at 1000 deg. C) for (Yb{sub 0.9}Ca{sub 0.1}){sub 2}Ti{sub 2}O{sub 7} {approx} 0.2, which is the maximum value observed to date for pyrochlores of the A{sub 2}B{sub 2}O{sub 7} type, where A = Ln and B is a Subgroup IVA element of the periodic system. The bulk and grain-boundary components of the conductivity of (Yb{sub 0.95}Ca{sub 0.05}){sub 2}Ti{sub 2}O{sub 7} synthesized at temperatures of 1300, 1400, and 1500 deg. C are studied using impedance spectroscopy. It is found that the (Yb{sub 0.95}Ca{sub 0.05}){sub 2}Ti{sub 2}O{sub 7} sample synthesized at 1500 deg. C has the highest total conductivity due to the increased grain-boundary component. The bulk component of the ionic conductivity of (Yb{sub 0.95}Ca{sub 0.05}){sub 2}Ti{sub 2}O{sub 7} is hardly affected by the synthesis temperature and depends mainly on the degree of heterovalent substitution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Relationship between the defect structure and fluorine-ion conductivity of La{sub 1−y}Sr{sub y}F{sub 3−y} (0 ⩽ y ⩽ 0.15) crystals according to X-ray and neutron diffraction data

The defect structure of crystals of as-grown nonstoichiometric tysonite (LaF{sub 3} type) La{sub 1−y}Sr{sub y}F{sub 3−y} phase (y = 0, 0.05, 0.07, and 0.15) has been investigated by X-ray diffraction and neutron diffraction. A concentration-driven structural transition from the β-La{sub 1−y}Sr{sub y}F{sub 3−y} modification to the α-La{sub 1−y}Sr{sub y}F{sub 3−}y modification in the range y = 0.05–0.10 has been observed for the first time. This transition correlates with the maximum of fluorine-ion conductivity (y = 0.05 ± 0.02) and the maximum in the melting curve (y = 0.07 ± 0.03). β-LaF{sub 3} and β-La{sub 0.95}Sr{sub 0.05}F{sub 2.95} crystals belong to the trigonal system (sp. gr. P3̄c1, Z = 6) and are twinned according to the merohedral twin law. Fine changes in the fluorine sublattice of β-La{sub 0.95}Sr{sub 0.05}F{sub 2.95} increase conductivity σ{sub 293K} to 3 × 10{sup −4} S/cm; hence, these crystals can be used as fluorine-conducting solid electrolytes (FCSEs) in solid-state ionics devices. Additional possibilities of ion transport over twin joints are discussed. In α-La{sub 0.85}Sr{sub 0.15}F{sub 2.85} crystal the symmetry group changes to P6{sub 3}/mmc, Z = 2; it is not twinned and its fluorine-ion conductivity is reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluorine-ion conductivity of different technological forms of solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (LaF{sub 3} Type ) (M = Ca, Sr, Ba; R Are Rare Earth Elements)

We have investigated the conductivity of some representatives of different technological forms of fluoride-conducting solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (M = Ca, Sr, Ba; R are rare earth elements) with an LaF{sub 3} structure: single crystals, cold- and hot-pressing ceramics based on a charge prepared in different ways (mechanochemical synthesis, solid-phase synthesis, and fragmentation of single crystals), polycrystalline alloys, etc. It is shown (by impedance spectroscopy), that different technological forms of identical chemical composition (R, M, y) exhibit different electrical characteristics. The maximum conductivity is observed for the single-crystal form of R{sub 1–y}M{sub y}F{sub 3–y} tysonite phases, which provides (in contrast to other technological forms) the formation of true volume ion-conducting characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increase in the Fluorine-Ion Conductivity of Single Crystals of Tysonite-type CeF{sub 3} Superionic Conductor by Substituting Polarized Cd{sup 2+} Ions for Ce{sup 3+} Ions

The fluorine-ion conductivity of single crystals with a tysonite (LaF{sub 3}) structure with heterovalent isomorphic substitutions of highly polarizable Cd{sup 2+} cations with a 18-electron shell for rare earth ions Ce{sup 3+} have been studied for the first time. Ce{sub 0.995}Cd{sub 0.005}F{sub 2.995} single crystals have been grown from melt by the Bridgman technique in a fluorinating atmosphere. The fluorine-ion conductivity of single crystal is measured by impedance spectroscopy in the temperature range from 153 to 1073 K, where it increases by a factor of 10{sup 9}, approaching the value σ{sub dc} = 5 × 10{sup –2} S/cm at 1073 K. At T{sub 0} = 450 ± 20 K, the dependence σ{sub dc}(T) is split into two portions with the ion-transport activation enthalpy ΔH{sub σ} = 0.39 ± 0.01 eV (T < T{sub 0}) and ΔH{sub σ} = 0.23 ± 0.02 eV (T > T0). It is found that at T = 293 K the conductivity σ{sub dc} = 3 × 10{sup –5} S/cm of Ce{sub 0.995}Cd{sub 0.005}F{sub 2.995} crystal is higher by a factor of 10 than the conductivity of the tysonite matrix CeF{sub 3} and close to the σ{sub dc} value for Ce{sub 0.995}Sr{sub 0.005}F{sub 2.995} crystal. This finding indicates a significant effect of the substitutions of Cd{sup 2+} ions for Ce{sup 3+} on the σdc value and the advantage of Cd{sup 2+} ions over Ca{sup 2+} and Ba{sup 2+} from the viewpoint of increasing σ{sub dc}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative differential conductance in InAs wire based double quantum dot induced by a charged AFM tip

We investigate the conductance of an InAs nanowire in the nonlinear regime in the case of low electron density where the wire is split into quantum dots connected in series. The negative differential conductance in the wire is initiated by means of a charged atomic force microscope tip adjusting the transparency of the tunneling barrier between two adjoining quantum dots. We confirm that the negative differential conductance arises due to the resonant tunneling between these two adjoining quantum dots. The influence of the transparency of the blocking barriers and the relative position of energy states in the adjoining dots on a decrease of the negative differential conductance is investigated in detail.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Calculation of Thermal Conductivity Coefficients of Electrons in Magnetized Dense Matter

The solution of Boltzmann equation for plasma in magnetic field with arbitrarily degenerate electrons and nondegenerate nuclei is obtained by Chapman−Enskog method. Functions generalizing Sonine polynomials are used for obtaining an approximate solution. Fully ionized plasma is considered. The tensor of the heat conductivity coefficients in nonquantized magnetic field is calculated. For nondegenerate and strongly degenerate plasma the asymptotic analytic formulas are obtained and compared with results of previous authors. The Lorentz approximation with neglecting of electron−electron encounters is asymptotically exact for strongly degenerate plasma. For the first time, analytical expressions for the heat conductivity tensor for nondegenerate electrons in the presence of a magnetic field are obtained in the three-polynomial approximation with account of electron−electron collisions. Account of the third polynomial improved substantially the precision of results. In the two-polynomial approximation, the obtained solution coincides with the published results. For strongly degenerate electrons, an asymptotically exact analytical solution for the heat conductivity tensor in the presence of a magnetic field is obtained for the first time. This solution has a considerably more complicated dependence on the magnetic field than those in previous publications and gives a several times smaller relative value of the thermal conductivity across the magnetic field at ωτ * 0.8.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Features of the mechanism of electrical conductivity of semiinsulating CdTe crystals

Temperature dependence of electrical characteristics of p-CdTe semi4nsulating single-crystals are studied, and substantial features of their electrical conductivity not described in available publications are revealed. The activation energy of the p-type conduction material close to the intrinsic one can be both lower and higher than the half-width of the band gap of semi conductor. The results of the analysis of statistics of electrons and holes based on the electroneutrality equation showed that the observed features of electrical properties of the material can be interpreted based on the specific features of compensation processes. The procedure of determining the ionization energy and degree of compensation of acceptors responsible for electrical conductivity of the material is suggested. It is shown that, in the limits of climatic temperature variations, inversion of the conduction type can be observed, and, as a consequence, the Schottky contact can disappear in the CdTe-based detector of the X-ay and {gamma} radiation.

36 MATERIALS SCIENCE↗

Low-temperature conductivity in CuGaS{sub 2} single crystals

CuGaS{sub 2} single crystals are grown by the Bridgman-Stockbarger method. X-ray diffraction and Raman studies are performed. It is shown that the conductivity at low temperatures has an activation mechanism: in the range of 100–300 K, impurity conduction with an acceptor activation energy of 12 meV dominates; at temperatures below 100 K, Mott conductivity, i.e., so-called hopping conductivity with a variable hop length prevails. The density of localized states and the average carrier hop length are estimated.

36 MATERIALS SCIENCE↗

Effects of Mechanical Strain on Ionic Conductivity in the Interface between LiPON and Ni-Mn Spinel

We present first-principles calculations to understand ionic conductivity in the interface between lithium phosphorous oxynitride (LiPON) and Ni-Mn spinel (LNM), with emphasis on the effect of mechanical strain. Two LiPON/LNM interfaces, one with and the other without BaTiO3 (BTO) additive, are modeled as abrupt interfaces to minimize the effects of the space-charge layer formation. It is observed that the interface with BTO additive has higher ionic conductivity than the other. Comparison of structural geometry indicates that the LiPON part of the LiPON/LNM interface is contracted but it recovers with BTO additive, which suggests the relevance of mechanical strain to ionic conductivity in these interfaces and the role of BTO in controlling the mechanical strain. The activation energy barriers of Li-hopping in a bulk LiPON, calculated at different levels of mechanical strain, exhibit a significant increase with compressive strain, supporting the suggested effect of mechanical strain in the interfaces. Lastly, this result implies that ionic conductivity in the interface between LiPON and cathode can be enhanced by modifying the interface but with appropriate size and distribution of additives.

25 ENERGY STORAGE↗

Composition and Manufacturing Effects on Electrical Conductivity of Li/FeS 2 Thermal Battery Cathodes

The electrical conductivity is key to the performance of thermal battery cathodes. In this work we present the effects of manufacturing and processing conditions on the electrical conductivity of Li/FeS2 thermal battery cathodes. Finite element simulations were used to compute the conductivity of three-dimensional microcomputed tomography cathode microstructures and compare results to experimental impedance spectroscopy measurements. A regression analysis reveals a predictive relationship between composition, processing conditions, and electrical conductivity; a trend which is largely erased after thermally-induced deformation. Moreover, the trend applies to both experimental and simulation results, although is not as apparent in simulations. This research is a step toward a more fundamental understanding of the effects of processing and composition on thermal battery component microstructure, properties, and performance.

25 ENERGY STORAGE↗

Exploring limitations in the induced polarization versus surface conductivity relationship in the case of wetland soils

Recent induced polarization studies suggest that the real part of surface conductivity (σ' surf ) scales linearly with the imaginary conductivity (σ'' = σ'' surf ) or normalized chargeability (Mn) for a range of soil types. The coefficients of this relationship l and l_Mn ( l = σ''/σ' surf or l_Mn = Mn/σ' surf ) allow the separation of the surface and electrolytic conductivities from the bulk conductivity. However, the dependence of these constants on varying soil physicochemical properties, including under unsaturated conditions, is yet to be assessed. Using estimates of σ' surf from 18 undisturbed soil samples from a restored wetland and σ'' measured over a frequency range of 0.01 Hz to 10 kHz, the σ' surf and σ'' were compared with the laboratory measurements of soil properties. Also, l and l_Mn were calculated for each soil sample and regressed them against the soil properties. We find an apparent dependence of l on soil texture, bulk density, organic matter, and moisture contents, with coefficients of determination (R 2 ) ranging from 0.5 to 0.65 at low frequencies (e.g., 1 Hz) but not at high frequencies (e.g., 936 Hz). This dependence of l on soil texture results from the insensitivity of σ'' at low frequency to σ' surf and, by implication, to the soil properties controlling σ' surf . In contrast, l_Mn indicates no correlation with the soil properties because Mn is linearly correlated with σ' surf and correlated with the soil properties controlling σ' surf . Finally, our results call for caution on the application of σ'' at a single frequency as a proxy of σ' surf because σ'' is not necessarily correlated with σ' surf across all soil types. Although using l_Mn derived from multifrequency measurements overcomes this limitation, field acquisition of spectral information (e.g., up to 1000 Hz) remains a challenge.

54 ENVIRONMENTAL SCIENCES↗

Interfacial Layer Growth Condition Dependent Electrical Conduction in HfO2/SiO2 Heterostructured Thin Films

The electrical conduction mechanism contributing to the leakage current at different field regions has been studied in this work. The current-voltage (I-V) measurement of TiN/HfO{sub 2}/SiO{sub 2}/P-Si nMOS capacitor has been taken for two different interfacial layer (SiO{sub 2}) growth conditions such as in situ steam grown (ISSG) and chemical processes. It is observed that Poole-Frenkel mechanism is the dominant conduction mechanism in high field region whereas Ohmic conduction is dominant in the low field region. Also it is seen that the gate leakage current is reduced for the devices having chemically grown interfacial layer compared to that of ISSG devices. Both trap energy level ({phi}{sub t}) and activation energy (E{sub a}) increase in the chemically grown interfacial layer devices for the Poole-Frenkel and Ohmic conduction mechanisms respectively in comparison to ISSG devices. Trap energy level ({phi}{sub t}) of {approx} 0.2 eV, obtained from Poole-Frenkel mechanism indicates that the doubly ionized oxygen vacancies (V{sup 2-}) are the active defects and are contributing to the leakage current in these devices.

14 SOLAR ENERGY↗