Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conducting structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Damage tolerance of pressurized graphite/epoxy tape cylinders under uniaxial and biaxial loading

The damage tolerance behavior of internally pressurized, axially slit, graphite/epoxy tape cylinders was investigated. Specifically, the effects of axial stress, structural anisotropy, and subcritical damage were considered. In addition, the limitations of a methodology which uses coupon fracture data to predict cylinder failure were explored. This predictive methodology was previously shown to be valid for quasi-isotropic fabric and tape cylinders but invalid for structurally anisotropic (+/-45/90)(sub s) and (+/-45/0)(sub s) cylinders. The effects of axial stress and structural anisotropy were assessed by testing tape cylinders with (90/0/+/-45)(sub s), (+/-45/90)(sub s), and (+/-45/0)(sub s) layups in a uniaxial test apparatus, specially designed and built for this work, and comparing the results to previous tests conducted in biaxial loading. Structural anisotropy effects were also investigated by testing cylinders with the quasi-isotropic (0/+/-45/90)(sub s) layup which is a stacking sequence variation of the previously tested (90/0/+/-45)(sub s) layup with higher D(sub 16) and D(sub 26) terms but comparable D(sub 16) and D(sub 26) to D(sub 11) ratios. All cylinders tested and used for comparison are made from AS4/3501-6 graphite/epoxy tape and have a diameter of 305 mm. Cylinder slit lengths range from 12.7 to 50.8 mm. Failure pressures are lower for the uniaxially loaded cylinders in all cases. The smallest percent failure pressure decreases are observed for the (+/-45/90)(sub s) cylinders, while the greatest such decreases are observed for the (+/-45/0)(sub s) cylinders. The relative effects of the axial stress on the cylinder failure pressures do not correlate with the degree of structural coupling. The predictive methodology is not applicable for uniaxially loaded (+/-45/90)(sub s) and (+/-45/0)(sub s) cylinders, may be applicable for uniaxially loaded (90/0/+/-45)(sub s) cylinders, and is applicable for the biaxially loaded (90/0/+/-45)(sub s) and (0/+/-45/90)(sub s) cylinders. This indicates that the ratios of D(sub 16) and D(sub 26) to D(sub 11), as opposed to the absolute magnitudes of D(sub 16) and D(sub 26), may be important in the failure of these cylinders and in the applicability of the methodology. Discontinuities observed in the slit tip hoop strains for all the cylinders tested indicate that subcritical damage can play an important role in the failure of tape cylinders. This role varies with layup and loading condition and is likely coupled to the effects of structural anisotropy. Biaxial failure pressures may exceed the uniaxial values because the axial stress contributes to the formation of 0 deg ply splitting (accompanied by delamination) or similar stress-mitigating subcritical damage. The failure behavior of similar cylinders can also vary as a result of differences in the role of subcritical damage as observed for the case of a biaxially loaded (90/0/+/-45)(sub s) cylinder with a 12.7 mm slit. For this case, the methodology is valid when the initial coupon and cylinder fracture modes agree. However, the methodology underpredicts the failure pressure of the cylinder when a circumferential fracture path, suggestive of a 0 deg ply split, occurs at one slit tip. Thus, the failure behavior of some tape cylinders may be highly sensitive to the initial subcritical damage mechanism. Finite element analyses are recommended to determine how structural anisotropy and axial stress modify the slit tip stress states in cylinders from those found in flat plates since similarity of these stress states is a fundamental assumption of the current predictive methodology.

Priest, Stacy Marie↗

Synthesis and microstructural TEM investigation of CaCu{sub 3}Ru{sub 4}O{sub 12} ceramic and thin film

CaCu{sub 3}Ru{sub 4}O{sub 12} (CCRO) is a conductive oxide having the same structure as CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) and close lattice parameters. The later compound is strongly considered for high density parallel plates capacitors application due to its so-called colossal dielectric constant. The need for an electrode inducing CCTO epitaxial growth with a clean and sharp interface is therefore necessary, and CCRO is a good potential candidate. In this paper, the synthesis of monophasic CCRO ceramic is reported, as well as pulsed laser deposition of CCRO thin film onto (001) NdCaAlO{sub 4} substrate. Structural and physical properties of bulk CCRO were studied by transmission electron microscopy and electron spin resonance. CCRO films and ceramic exhibited a metallic behavior down to low temperature. CCRO films were (001) oriented and promoted a CCTO film growth with the same orientation. - Graphical Abstract: Structure of CaCu{sub 3}Ru{sub 4}O{sub 12} showing the RuO{sub 6} octahedra and the square planar environment for Cu{sup 2+}. Highlights: > In this study, we investigate the structural properties and microstructure of ceramics CaCu{sub 3}Ru{sub 4}O{sub 12}. > We study the conduction properties of polycrystalline material. > Then we synthesize the conductive thin film which is deposited on a high K material with the same structure (CaCu{sub 3}Ti{sub 4}O{sub 12}).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two–Photon Polymerized Shape Memory Microfibers: A New Mechanical Characterization Method in Liquid

Two-photon polymerization (TPP) is widely used to create 3D micro- and nanoscale scaffolds for biological and mechanobiological studies, which often require the mechanical characterization of the TPP fabricated structures. To satisfy physiological requirements, most of the mechanical characterizations need to be conducted in liquid. However, previous characterizations of TPP fabricated structures are all conducted in air due to the limitation of conventional micro- and nanoscale mechanical testing methods. In this study, a new experimental method is reported for testing the mechanical properties of TPP-printed microfibers in liquid. The experiments show that the mechanical behaviors of the microfibers tested in liquid are significantly different from those tested in air. By controlling the TPP writing parameters, the mechanical properties of the microfibers can be tailored over a wide range to meet a variety of mechanobiology applications. In addition, it is found that, in water, the plasticly deformed microfibers can return to their predeformed shape after tensile strain is released. The shape recovery time is dependent on the size of microfibers. The experimental method represents a significant advancement in mechanical testing of TPP fabricated structures and may help release the full potential of TPP fabricated 3D tissue scaffolds for mechanobiological studies.

36 MATERIALS SCIENCE↗

Study of self-assembly behavior and ionic conductivity of conjugated liquid crystals with T-shaped facial-polyphilic structure

The unique self-assembly of liquid crystals (LCs), combined with their potential application as organic semiconductors, has become a focus of recent research. Here, a joint experimental and computational study of the self-assembly and ionic conduction was carried out on a series of T-shaped conjugated LCs consisting of three incompatible components. By extending the EOn side-chain length, several experimental evaluations confirmed a decrease of the order-disorder transition temperature, while coarse-grained simulations revealed a structural evolution from a smectic phase to a columnar phase. Ionic conductivity of these molecules was achieved by adding Li salt, leading to a maximum conductivity of 1.1 × 10 −3 siemens per centimeter observed at 120°C. All-atom simulations were performed to examine the Li-ion solvation environment and to evaluate the intrachain and interchain Li-ion hopping mechanisms. The molecule with a long EOn side chain was found to generate a densely distributed network of Li-ion solvation sites, which can facilitate effective interchain hopping to promote ion transport.

Liu, Ziwei [Cornell Univ., Ithaca, NY (United Stat↗

Electronic Structure of Excitons in Hematite Fe 2 O 3

We present a computational study of the electronic structure of excitons in hematite Fe 2 O 3 using density functional theory (DFT) and time-dependent DFT theory. Excitons resulting from solar light absorption are precursors to photogenerated charge carriers, which are the active species in solar-to-fuel redox conversions. Upon vertical excitation, the lowest energy exciton is found to have a multideterminantal wave function, describing an electron excited from O 2p states to Fe 3d states of the nearest basal plane, possibly supporting a recent XUV-derived exciton structure with a radius of a single Fe–O bond. Subsequently, the exciton self-traps into stable electron–hole pair structures whose wave functions are well-approximated by single excitations conveniently labeled “HOMO–LUMO”. Self-trapping yields electron–hole pair structures whereby the electron state (electron polaron-like) is separated from the hole state (hole polaron-like) by 3, 5, 7, 9, ... basal planes in structures referred to as Exc-3, Exc-5, Exc-7, Exc-9, ... The natural transition orbitals (electron–hole states) exhibit a strong “localized” character. The hole state is best described as a (FeO 6 ) + octahedral moiety carrying ~0.65 h + charge, and overall ~70% of the hole is assigned to O 2p atomic states, mostly on the four (4) equatorial O atoms of the moiety. The electron state is best described as a (FeFe) – moiety carrying ~0.80 e – charge in Fe 3d atomic states. The lattice distortions around the hole site exhibit Fe–O bond shortening due to the removal of electron density from an orbital state with O–Fe–O antibonding character. The electron site shows Fe–Fe distance shortening due to excess electron density added to an orbital state with in-phase Fe–Fe interactions. Furthermore, these excitonic structures with increasing electron–hole separation can be viewed as the onset of exciton separation into isolated electrons and hole polarons.

36 MATERIALS SCIENCE↗

Nuclear Quantum Effects on the Electronic Structure of Water and Ice

The electronic properties and optical response of ice and water are intricately shaped by their molecular structure, including the quantum mechanical nature of the hydrogen atoms. Despite numerous previous studies, a comprehensive understanding of the nuclear quantum effects (NQEs) on the electronic structure of water and ice at finite temperatures remains elusive. Here, we utilize molecular simulations that harness efficient machine-learning potentials and many-body perturbation theory to assess how NQEs impact the electronic bands of water and hexagonal ice. By comparing path-integral and classical simulations, we find that NQEs lead to a larger renormalization of the fundamental gap of ice, compared to that of water, ultimately yielding similar bandgaps in the two systems, consistent with experimental estimates. Our calculations suggest that the increased quantum mechanical delocalization of protons in ice, relative to water, is a key factor leading to the enhancement of NQEs on the electronic structure of ice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unusual electrical conductivity driven by localized stoichiometry modification at vertical epitaxial interfaces

Precise control of lattice mismatch accommodation and interfacial cation diffusion is critical to modulate correlated functionalities in epitaxial heterostructures, particularly when the interface composition is positioned near a compositional phase transition boundary. Here we select La 1-x Sr x MnO 3 (LSMO) as a prototype phase transition oxide and establish vertical epitaxial interfaces with NiO for exploring the strong interplay between strain accommodation, stoichiometry modification, and localized electron transport across the interface. It is found that localized stoichiometry modification overcomes the dead layer problem plaguing LSMO and leads to strongly directional conductivity, as manifested by a more than three orders of magnitude difference between out-of-plane and in-plane conductivity. Comprehensive atomic scale structural characterization and transport measurements reveal that this emerging behavior is created by a compositional change produced by preferential cation diffusion that pushes the LSMO phase transition from insulating into metallic within an ultrathin interface region. This study explores the nature of unusual electrical conductivity at vertical epitaxial interfaces and highlights the beneficial role of controllable cation diffusion that enables emerging functionalities for a broad range of potential applications such as memristors, spintronic devices, and novel nanoelectronic devices using strongly correlated materials.

36 MATERIALS SCIENCE↗

Development of micro-four-point probe in a scanning tunneling microscope for in situ electrical transport measurement

Electrons at surface may behave differently from those in bulk of a material. Multi-functional tools are essential in comprehensive studies on a crystal surface. Here, we developed an in situ microscopic four-point probe (4PP) transport measurement system on the basis of a scanning tunneling microscope (STM). In particular, convenient replacement between STM tips and micro-4PPs enables systematic investigations of surface morphology, electronic structure, and electrical transport property of a same sample surface. Performances of the instrument are demonstrated with high-quality STM images, tunneling spectra, and low-noise electrical I-V characteristic curves of a single-layer FeSe film grown on a conductive SrTiO{sub 3} surface.

36 MATERIALS SCIENCE↗

The Thermal Hogan - A Means of Surviving the Lunar Night

document describes the Thermal Hogan, a new shelter concept that would be used on the Moon to moderate the extreme nighttime temperatures, allowing survival of equipment with minimal heater power. It is lightweight, has few mechanical parts, and would be relatively easy to deploy on the Moon. The Lunar Hogan has two parts: an insulated shelter and a thermal mass. The shelter is constructed of multilayer insulation (MLI) draped over a structural framework. Entry and egress are accomplished either by raising the structure or via a door constructed of the same MLI material as the shelter. The thermal mass can be manufactured from locally available materials, either by piling substantially sized rocks to a depth of 0.25 meter, or by filling a 0.25-meter-deep conductive honeycomb-like structure with lunar dust. For ease of transport, the structural framework and honeycomb can be collapsible. The door can be opened by pushing on it in either direction. Gravity would cause it to close and it could be sealed via magnetic strips on the doorframe.

Fruitwala, Neelay↗

Probing the Impact of the EchinT C-Terminal Domain on Structure and Catalysis

Histidine triad nucleotide binding protein (Hint) is considered as the ancestor of the histidine triad protein superfamily and is highly conserved from bacteria to humans. Prokaryote genomes, including a wide array of both Gram-negative bacteria and Gram-positive bacteria, typically encode one Hint gene. The cellular function of Hint and the rationale for its evolutionary conservation in bacteria have remained a mystery. Despite its ubiquity and high sequence similarity to eukaryote Hint1 [Escherichia coli Hint (echinT) is 48% identical with human Hint1], prokaryote Hint has been reported in only a few studies. Here we report the first conformational information on the full-length N-terminal and C-terminal residues of Hint from the E. coli complex with GMP. Structural analysis of the echinT-GMP complex reveals that it crystallizes in the monoclinic space group P2{sub 1} with four homodimers in the asymmetric unit. Analysis of electron density for both the N-terminal residues and the C-terminal residues of the echinT-GMP complex indicates that the loops in some monomers can adopt more than one conformation. The observation of conformational flexibility in terminal loop regions could explain the presence of multiple homodimers in the asymmetric unit of this structure. To explore the impact of the echinT C-terminus on protein structure and catalysis, we conducted a series of catalytic radiolabeling and kinetic experiments on the C-terminal deletion mutants of echinT. In this study, we show that sequential deletion of the C-terminus likely has no effect on homodimerization and a modest effect on the secondary structure of echinT. However, we observed a significant impact on the folding structure, as reflected by a significant lowering of the T{sub m} value. Kinetic analysis reveals that the C-terminal deletion mutants are within an order of magnitude less efficient in catalysis compared to wild type, while the overall kinetic mechanism that proceeds through a fast step, followed by a rate-limiting hydrolysis step, was conserved. Nevertheless, the ability of the C-terminal deletion mutants to hydrolyze lysyl-AMP generated by LysU was greatly impaired. Taken together, our results highlight the emerging role of the C-terminus in governing the catalytic function of Hints.

59 BASIC BIOLOGICAL SCIENCES↗

Thermoelectric properties of doped BaHfO{sub 3}

We have studied the structural stability, electronic structure, optical properties and thermoelectric properties of doped BaHfO{sub 3} by full potential linearized augmented plane wave (FP-LAPW) method. The electronic structure of BaHfO{sub 3} doped with Sr shows enhances the indirect band gaps of 3.53 eV, 3.58 eV. The charge density plots show strong ionic bonding in Ba-Hf, and ionic and covalent bonding between Hf and O. Calculations of the optical spectra, viz., the dielectric function, refractive index and extinction coefficient are performed for the energy range are calculated and analyzed. Thermoelectric properties of semi conducting are also reported first time. The doped BaHfO{sub 3} is approximately wide band gap semiconductor with the large p-type Seebeck coefficient. The power factor of BaHfO{sub 3} is increased with Sr doping, decreases because of low electrical resistivity and thermal conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of sequential treatment with fluorine and bromine on graphite fibers

Three pitch based graphite fibers with different degrees of graphitization and one polyacryonitrile (PAN) based carbon fiber from Amoco Corporation were treated with 1 atm, room temperature fluorine gas for 90 hrs. Fluorination resulted in higher electrical conductivity for all pitch fibers. Further bromination after ambient condition defluorination resulted in further increases in electrical defluorination conductivity for less graphitized, less structurally ordered pitch fibers (P-55) which contain about 3% fluorine by weight before bromination. This product can be stable in 200 C air, or 100% humidity at 60 C. Due to its low cost, this less graphitized fiber may be useful for industrial application, such as airfoil deicer materials. The same bromination process, however, resulted in conductivity decreases for fluorine rich, more graphitized, structurally oriented pitch fibers (P-100 and P-75). Such decreases in electrical conductivity were partially reversed by heating the fibers at 185 C in air. Differential scanning calorimetric (DSC) data indicated that the more graphitized fibers (P-100) contained BrF3, whereas the less graphitized fibers (P-55) did not.

Hung, Ching-Cheh↗

Study of the Effects of Materials Selection for the Closeout Structure on the Service Life of a Liquid Rocket Engine Thrust Chamber

The external structure of rocket engines thrust chambers for aerospace applications should be designed in order to provide adequate stiffness to the thrust chamber; however, it affects in a significant way the engine service life since it acts as a structural bound for the internal structure which is subjected to very high temperature values. The adoption of thin closeout structures allows to have lighter structures and to significantly increase the service life of the thrust chamber. The aim of the present work is to perform numerical investigations on the influence of the closeout geometry and materials on the number of cycles to failure of the thrust chamber. Furthermore, a study on the impact of creep phenomenon on the service life is illustrated. In particular, the present paper is focused on the thermomechanical study of the closeout structure, in terms of material choice, thickness, joining process with the inner liner, etc. Transient thermal and static structural nonlinear analyses are conducted by means of a commercial finite element code (ANSYS), in order to evaluate the number of cycles to failure for the investigated configurations. Viscoplastic models are adopted in order to simulate the highly nonlinear and rate-dependent phenomena occurring in the inner liner structure.

36 MATERIALS SCIENCE↗

Electrical conduction in nanodomains in congruent lithium tantalate single crystal

The electrical current flow behavior was investigated for nanodomains formed in a thin congruent lithium tantalate (LiTaO{sub 3}) single-crystal plate. When the nanodomains were relatively large, with diameters of about 100 nm, current flow was detected along the domain wall. However, when they were about 40 nm or smaller, the current flowed through the entire nanodomain. Schottky-like rectifying behavior was observed. Unlike the case of LiNbO{sub 3}, optical illumination was not required for current conduction in LiTaO{sub 3}. A clear temperature dependence of the current was found indicating that the conduction mechanism for nanodomains in LiTaO{sub 3} may involve thermally activated carrier hopping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conductance and resonant tunneling in multi-channel double barrier structures under transverse and longitudinal electric fields

Transport properties of electrons through biased double barrier semiconductor structures with finite transverse width w{sub y}, in the presence of a channel-mixing transverse electric field E{sub T} (along the y-axis), were studied. We solve the multichannel Schrödinger equation using the transfer matrix method and transport properties, like the conductance G and the transmission coefficients T{sub ij} have been evaluated as functions of the electrons' energy E and the transverse and longitudinal (bias) electric forces, f{sub T} and f{sub b}. We show that peak-suppression effects appear, due to the applied bias. Similarly, coherent interference of wave-guide states induced by the transverse field is obtained. We show also that the coherent interference of resonant wave-guide states gives rise to resonant conductance, which can be tuned to produce broad resonant peaks, implying operation frequencies of the order of 10 THz or larger.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin-flip induction of Fano resonance upon electron tunneling through atomic-scale spin structures

The inclusion of inelastic spin-dependent electron scatterings by the potential profiles of a single magnetic impurity and a spin dimer is shown to induce resonance features due to the Fano effect in the transport characteristics of such atomic-scale spin structures. The spin-flip processes leading to a configuration interaction of the system's states play a fundamental role for the realization of Fano resonance and antiresonance. It has been established that applying an external magnetic field and a gate electric field allows the conductive properties of spin structures to be changed radically through the Fano resonance mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular structures of residual solvent in polyacrylonitrile based electrolytes: Implications for conductivity and stability

Lithium-ion batteries increasingly play significant roles in modern technologies; however, increased energy density also raises concerns about electrolyte safety. Traditional electrolytes that use volatile organic solvents face risks of thermal runaways and fires from electrode shorting. In response, polymer-based solid electrolytes have been developed for replacement. Polyacrylonitrile (PAN) is a promising fire-resistant component for electrolyte fabrication, but its limited solubility necessitates using low-volatility solvents, which are notoriously difficult to remove in subsequent drying processes. Here, we use femtosecond two-dimensional infrared spectroscopy to provide an in-depth understanding of how residual solvent from processing affects the molecular structures and dynamics within a polymer electrolyte. To this end, linear and nonlinear infrared spectroscopies are employed to interrogate the molecular interactions in PAN-based electrolytes containing various contents of N,N-dimethylformamide (DMF). We show that the amount of DMF within the PAN electrolyte affects the Li+ structure. Further, the coordination can proceed through the carbonyl group and/or the amide nitrogen to form antiparallel structures with the nitrile groups of PAN through dipole–dipole interactions. The free motion of DMF is drastically inhibited upon interaction with Li+ and PAN, which decreases the ionic conductivity and potentially affects the stability (resistance toward removal and chemical decomposition). These findings have implications for the design and processing of solid polymer electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge transport mechanisms of graphene/semiconductor Schottky barriers: A theoretical and experimental study

Graphene has been proposed as a material for semiconductor electronic and optoelectronic devices. Understanding the charge transport mechanisms of graphene/semiconductor Schottky barriers will be crucial for future applications. Here, we report a theoretical model to describe the transport mechanisms at the interface of graphene and semiconductors based on conventional semiconductor Schottky theory and a floating Fermi level of graphene. The contact barrier heights can be estimated through this model and be close to the values obtained from the experiments, which are lower than those of the metal/semiconductor contacts. A detailed analysis reveals that the barrier heights are as the function of the interface separations and dielectric constants, and are influenced by the interfacial states of semiconductors. Our calculations show how this behavior of lowering barrier heights arises from the Fermi level shift of graphene induced by the charge transfer owing to the unique linear electronic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗