SEARCH · Engineering Papers

Results for “camera system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

All sources NASA NTRS DOE OSTI

NASA NTRS1971

An F1 Schmidt satellite camera and the methods of plate measurement and reduction

The f1 Hewitt camera is a field flattened Schmidt system of 60cm aperture. The salient features of this equipment are briefly described. Details of the methods of plate measurement are then given. The plate reduction is carried out in two stages. The plate is first calibrated using the photogrammetric method. The formulae usually quoted have been extended to take account of the large distortion introduced by the field flattening lens. In the second stage, the satellite measurements are reduced to satellite positions corrected for refraction, aberration, and when necessary, phase.

Hewitt, J.↗

NASA NTRS1972

An all-sky X-ray monitor for the UK-5 satellite.

An X-ray imaging system using a pin-hole camera and a position sensitive proportional counter at the image plane has been designed for an all-sky X-ray monitor for UK-5 satellite. This high-sensitivity device with real-time coverage of the entire celestial sphere would aid in programming satellite maneuvers such that transient events in the X-ray sky could be investigated in detail by the other primary satellite experiments. Discussion of design criteria for the camera geometry, the position sensitive proportional detector, and electronics to handle the data is presented in this paper.

Desai, U. D.↗

NASA NTRS1972

Imaging experiment - The Viking Mars Orbiter.

The general objectives of the imaging experiment on the Viking Orbiter are to aid the selection of Viking Lander sites, to map and monitor the chosen sites during lander operations, to aid in the selection of future landing sites, and to extend our knowledge of the planet. The imaging system consists of two identical vidicon cameras each attached to a 1026-mm T/8 telescope giving approximately 1-deg square field of view. From an altitude of 1500 km, the picture elements will be approximately 24 m apart. The vidicon is coupled with an image intensifier which provides increased sensitivity and permits electronic shuttering and image motion compensation. The camera differs from those previously flown to Mars by providing contiguous coverage at high resolution on a single orbital pass, by having sufficient sensitivity to use narrow band color filters at maximum resolution, and by having response in the ultraviolet.

Carr, M. H.↗

NASA NTRS1978

Equipment Development for Automatic Anthropometric Measurements

An automated procedure for measuring and recording the anthropometric active angles is presented. The small portable system consists of a microprocessor controlled video data acquisition system which measures single plane active angles using television video techniques and provides the measured data on sponsored-specified preformatted data sheets. This system, using only a single video camera, observes the end limits of the movement of a pair of separated lamps and calculates the vector angle between the extreme positions.

Cater, J. P.↗

NASA NTRS1979

Mission planning parameters for the Space Shuttle large format camera

The paper discusses the impact of various Space Shuttle mission parameters on the efficient and meaningful utilization of the large format camera (LFC) as a photographic acquisition system. Some of the LFC's vital statistics and its mounting within the Orbiter payload are described. LFC characteristics and mounting dictate certain mission parameters. The controlling parameters are orbit inclinations, launch time of year, launch time of day, orbital altitude, mission duration, overlap selection, film capacity, and climatological prediction. A mission case is evaluated relative to controlling parameters and geographical area(s) of interest.

Wood, G. A.↗

NASA NTRS1980

Rocket instrument for far-UV spectrophotometry of faint astronomical objects

A sensitive sounding rocket instrument for moderate (about 10-A) resolution far-UV (1160-1750-A) spectrophotometry of faint astronomical objects has been developed. The instrument employes a photon-counting microchannel plate imaging detector and a concave grating spectrograph behind a 40-cm Dall-Kirkham telescope. A unique remote-control pointing system, incorporating an SIT vidicon aspect camera, two star trackers, and a tone-encoded command telemetry link, permits the telescope to be oriented to within 5 arc sec of any target for which suitable guide stars can be found. The design, construction, calibration, and flight performance of the instrument are discussed.

Hartig, G. F.↗

NASA NTRS1981

Static diffusion cloud chambers

The chamber geometry and optical arrangement are described. The supersaturation range is given and consists of readings taken at five fixed points: 0.25%, 0.5%, 0.75%, 1.0%, and 1.25%. The detection system is described including light source, cameras, and photocell detectors. The temperature control and the calibration of the chamber are discussed.

Ayers, G.↗

NASA NTRS1982

Measurement of the line-of-sight velocity of high-altitude barium clouds A technique

It is demonstrated that for maximizing the scientific output of future ionospheric and magnetospheric ion cloud release experiments a new type of instrument is required which will measure the line-of-sight velocity of the ion cloud by the Doppler technique. A simple instrument was constructed using a 5-cm diam solid Fabry-Perot etalon coupled to a low-light-level integrating TV camera. It was demonstrated that the system has both the sensitivity and spectral resolution for detection of ion clouds and measurement of their line-of-sight Doppler velocity. The tests consisted of (1) a field experiment using a rocket barium cloud release to check sensitivity, and (2) laboratory experiments to show the spectral resolving capabilities of the system. The instrument was found to be operational if the source was brighter than approximately 1 kR, and it had a wavelength resolution much better than 0.2 A, which corresponds to approximately 12 km/sec or in the case of barium ion an acceleration potential of 100 V. The instrument is rugged and, therefore, simple to use in field experiments or on flight instruments. The sensitivity limit of the instrument can be increased by increasing the size of the etalon.

Mende, S. B.↗

NASA NTRS1981

Techniques for the measurements of the line of sight velocity of high altitude Barium clouds

It is demonstrated that for maximizing the scientific output of future ion cloud release experiments a new type of instrument is required which will measure the line of sight velocity of the ion cloud by the Doppler Technique. A simple instrument was constructed using a 5 cm diameter solid Fabry-Perot etalon coupled to a low light level integrating television camera. It was demonstrated that the system has both the sensitivity and spectral resolution for the detection of ion clouds and the measurement of their line of sight Doppler velocity. The tests consisted of (1) a field experiment using a rocket barium cloud release to check the sensitivity, (2) laboratory experiments to show the spectral resolving capabilities of the system. The instrument was found to be operational if the source was brighter than about 1 kilorayleigh and it had a wavelength resolution much better than .2A which corresponds to about 12 km/sec or an acceleration potential of 100 volts.

Mende, S. B.↗

NASA NTRS1982

Modulated Multiple Slit Camera for improved localization of gamma ray bursts

An instrument is described in which a cylindrical modulation collimator is added to one half of a Multiple Slit Camera (MSC) coded-aperture imaging system. The instrument provides gamma-ray burst positions from a single spacecraft that are as precise as the best positions from the long-baseline network of interplanetary spacecraft. The determination of fine positions is described, and the fine-position capability is shown to operate over about two-thirds of the MSC's nearly all-sky field of view. It is noted that the addition of the modulation collimator only slightly reduces the system's sensitivity and can improve the location precision for gamma-ray bursts and slower hard-X-ray transients to about 0.1 sq arcmin.

Gorenstein, P.↗

NASA NTRS1983

Camera/photometer results

Camera/photometer systems have been constructed for analyzing particulate contamination on STS-2. The systems contained two 16-mm photographic cameras to make stereoscopic observation of contaminant particles and the background. During the STS-2 mission, 102 photographic exposures were obtained under conditions suitable for recording particulate contamination. Attention is given to a breakdown of STS-2 camera/photometer data with the number of particles observed per frame, a correlation of observed contamination with mission elapsed time broken into 5-hr segments, and a correlation of observed contamination with onboard spacecraft events.

Clifton, K. S.↗

NASA NTRS1988

Angular-Momentum-Compensating Actuator

Reactionless actuator developed for instrument-pointing platforms on flexible spacecraft; by eliminating reactions, actuator changes aiming angle of platform without inducing vibrations in spacecraft, eliminateing vibrations in point angle of instrument platform. Actuator used on Earth in such systems as helicopter platforms for television cameras in law enforcement and news telecasts.

Wiktor, Peter J.↗

NASA NTRS1988

Rotorcraft handling-qualities design criteria development

Joint NASA/Army efforts at the Ames Research Center to develop rotorcraft handling-qualities design criteria began in earnest in 1975. Notable results were the UH-1H VSTOLAND variable stability helicopter, the VFA-2 camera-and-terrain-board simulator visual system, and the generic helicopter real-time mathematical model, ARMCOP. An initial series of handling-qualities studies was conducted to assess the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation. The ability to conduct in-flight handling-qualities research was enhanced by the development of the NASA/Army CH-47 variable-stability helicopter. Research programs conducted using this vehicle include vertical-response investigations, hover augmentation systems, and the effects of control-force characteristics. The handling-qualities data base was judged to be sufficient to allow an update of the military helicopter handling-qualities specification, MIL-H-8501. These efforts, including not only the in-house experimental work but also contracted research and collaborative programs performed under the auspices of various international agreements. The report concludes by reviewing the topics that are currently most in need of work, and the plans for addressing these topics.

Aiken, Edwin W.↗

NASA NTRS1988

Range and range rate system

A video controlled solid state range finding system which requires no radar, high power laser, or sophisticated laser target is disclosed. The effective range of the system is from 1 to about 200 ft. The system includes an opto-electric camera such as a lens CCD array device. A helium neon laser produces a source beam of coherent light which is applied to a beam splitter. The beam splitter applies a reference beam to the camera and produces an outgoing beam applied to a first angularly variable reflector which directs the outgoing beam to the distant object. An incoming beam is reflected from the object to a second angularly variable reflector which reflects the incoming beam to the opto-electric camera via the beam splitter. The first reflector and the second reflector are configured so that the distance travelled by the outgoing beam from the beam splitter and the first reflector is the same as the distance travelled by the incoming beam from the second reflector to the beam splitter. The reference beam produces a reference signal in the geometric center of the camera. The incoming beam produces an object signal at the camera.

Graham, Olin L.↗

NASA NTRS1988

Astronomy and astrophysics with the Advanced X-ray Astrophysics Facility

The optics and instruments of the Advanced X-ray Astrophysics Facility (AXAF) are described. The instrument capabilities are reviewed so that potential users of AXAF may plan supporting research in the years prior to launch. The AXAF is to be built around a large-area high-resolution grazing-incidence X-ray telescope, with a complement of imaging and spectroscopic instruments which can be maintained and/or replaced in orbit. An important feature of the AXAF is the aspect system. It utilizes solid state star cameras and fiducial lights to permit both image reconstruction (on the ground) with minimal blurring due to spacecraft and internal motions, and placement of the X-ray image on the sky to an accuracy of 1 arcsec.

Weisskopf, Martin C.↗

NASA NTRS1991

Development of high temperature containerless processing equipment and the design and evaluation of associated systems required for microgravity materials processing and property measurements

The development of high temperature containerless processing equipment and the design and evaluation of associated systems required for microgravity materials processing and property measurements are discussed. Efforts were directed towards the following task areas: design and development of a High Temperature Acoustic Levitator (HAL) for containerless processing and property measurements at high temperatures; testing of the HAL module to establish this technology for use as a positioning device for microgravity uses; construction and evaluation of a brassboard hot wall Acoustic Levitation Furnace; construction and evaluation of a noncontact temperature measurement (NCTM) system based on AGEMA thermal imaging camera; construction of a prototype Division of Amplitude Polarimetric Pyrometer for NCTM of levitated specimens; evaluation of and recommendations for techniques to control contamination in containerless materials processing chambers; and evaluation of techniques for heating specimens to high temperatures for containerless materials experimentation.

Rey, Charles A.↗

NASA NTRS1992

A statistical model for evaluating GOPEX uplink performance

This article describes a statistical model to analyze the signal intensity received at the solid-state imaging (SSI) camera of the Galileo optical communications system from an Earth-based transmitter (GOPEX) demonstration. The analytical model assumes that the optical beam possesses a Gaussian profile and the communication channel has a log-normal scattering characteristic. The atmospheric-induced jitter is modelled as two independent zero mean Gaussian random variables. By modelling the system parameters as a set of independent and identically distributed (iid) random variables, the combined impact of uncertainties due to system parameters and the turbulent atmosphere can be approximated by a log-normal distributed signal intensity at the spacecraft. A Monte-Carlo software simulation package was also developed to compute the confidence interval probabilities for general optical beam profiles. Numerical results show that the approximation is valid for a wide range of operation scenarios.

Kiesaleh, K.↗

NASA NTRS1993

The High Resolution Stereo Camera (HRSC) for the Lunar Scout 1 Mission

The High Resolution Stereo Camera (HRSC) is a planetary imaging system developed by the German Aerospace Research Establishment (DLR) with the involvement of the German Space Industry under the leadership of the German Space Agency (DARA) for the Russian Mars 94 and Mars 96 missions. The same instrument, virtually unmodified, is ideal for imaging the Moon. If flown on a Lunar Scout spacecraft, the HRSC will be operated so that it will produce data suitable for generation of a global lunar geodetic net, a global stereo image data set (both data sets produced at an orbit altitude of 200 kms approximately) and high resolution stereo imagery of areas of interest to the scientific community from an orbit altitude of 100 kms (resolution is a function of orbit altitude). All data will be digital.

Neukum, G.↗