Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Supersonic laminar flow control research

The objective is to understand supersonic laminar flow stability, transition, and active control. Some prediction techniques will be developed or modified to analyze laminar flow stability. The effects of distributed heating and cooling as an active boundary layer control technique will be studied. The primary tasks of the research apply to the NASA/Ames Proof of Concept (PoC) and Laminar Flow Supersonic Wind Tunnel's (LFSWT's) nozzle design with laminar flow control and are listed as follows: (1) predictions of supersonic laminar boundary layer stability and transition, (2) effects of wall heating and cooling on supersonic laminar flow control, (3) performance evaluation of the PoC and LFSWT nozzle designs with wall heating and cooling applied at different locations and various lengths, and (4) effects of a conducted versus pulse wall temperature distribution for the LFSWT.

Lo, Ching F.↗
NASA NTRS1997

Improved Boundary Conditions for Cell-centered Difference Schemes

Cell-centered finite-volume (CCFV) schemes have certain attractive properties for the solution of the equations governing compressible fluid flow. Among others, they provide a natural vehicle for specifying flux conditions at the boundaries of the physical domain. Unfortunately, they lead to slow convergence for numerical programs utilizing them. In this report a method for investigating and improving the convergence of CCFV schemes is presented, which focuses on the effect of the numerical boundary conditions. The key to the method is the computation of the spectral radius of the iteration matrix of the entire demoralized system of equations, not just of the interior point scheme or the boundary conditions.

VanderWijngaart, Rob F.↗
NASA NTRSDate not supplied

Wall-Modeled Large-Eddy Simulation of Supersonic Parachute Inflation

Supersonic parachutes have been used in nearly every robotic mission to another planetary body with an atmosphere because they are one of the most mass-efficient ways to decelerate a payload to land on the surface. Short of performing flight tests in the upper Earth atmosphere, we currently cannot reliably predict a novel parachute system’s performance or potential failure modes, or even confidently explain it after the fact, as was the case with the Low Density Supersonic Decelerator flight tests and subsequent investigations. Fluid-structure interaction (FSI) simulations have the potential to bridge this gap. To this end, we present several improvements to the state-of-the-art for simulating supersonic parachutes using FSI: a higher effective resolution convective flux, an immersed boundary turbulent wall layer modeling approach to capture viscous effects, and a novel method to obtain a more realistic initial parachute shape. A recent supersonic parachute flight test is simulated and compared to measurements for the purposes of model validation.

ESM↗
NASA NTRS1980

Prediction method for two-dimensional aerodynamic losses of cooled vanes using integral boundary-layer parameters

A generalized analysis to predict the two-dimensional aerodynamic losses of film-cooled vanes by using integral boundary-layer parameters is presented. Heat-transfer and trailing-edge injection effects are included in the method. An approximate solution of the generalized equations is also included to show more clearly the effect of the different boundary-layer and cooling parameters on the losses. The analytical predictions agree well with the experimental results, indicating that available boundary-layer calculations for cooled vanes are of sufficient accuracy to use in the prediction method.

Goldman, L. J.↗
NASA NTRS1977

The radial transport of energetic solar flare particles from 1 to 6 AU

Data from the Pioneer 10 and 11 missions to Jupiter and beyond are used in a study of solar flare accelerated particles at distances of several astronomical units from the sun. The intensity-time profiles out to at least 6 AU are consistent with mainly diffusive interplanetary propagation. The outer boundary of the diffusion region is thought to be beyond 10 AU, since no obvious effects of a free escape boundary were observed. Four solar particle events are discussed in detail. The events are interpreted in terms of a spherically symmetric propagation model which includes the effects of diffusion, convection, and adiabatic deceleration and which assumes that the particles are impulsively injected at the sun.

Hamilton, D. C.↗
NASA NTRS1982

Computation of incompressible, three-dimensional turbulent boundary layers and comparison with experiment

Incompressible three dimensional, turbulent boundary layer (3DTBL) experiments were simulated numerically by integrating the boundary layer equations together with an algebraic eddy viscosity turbulence model. For the flow treated, the downstream portion, where the crossflow was large, was not predicted with the present computational method; the flow was significantly influenced by elliptic flow field effects. Departures from the boundary layer concept are indicated. Calculations agreed reasonably well with the mean flow development up to separation. In one experiment the normal pressure gradients were found to be neligible in regions with large skewing and allowed testing turbulence models using the boundary layer equations. The simulation of this flow compared favorably with the experimental data throughout the flow field and suggested the applicability of algebraic eddy viscosity models for 3DTBLs.

Mueller, U. R.↗
NASA NTRS1985

A note on blade wake interaction influence on compressor stator row aerodynamic performance

Attention is given to the effect of blade wake interactions on the performance of an axial flow compressor's stator row, for the case of compressor and fan stator flows without shocks. The measured midspan loss of total pressure can be related to stator surface boundary layers, the chopped rotor wakes passing through the stator row, and the interaction between these flows. The interaction between rotor blade wake segments and stator blade surface boundary layers generates much higher losses than expected in both the stator wake and in the region of flow between stator boundary layers/wakes, if interaction effects are ignored.

Okiishi, T. H.↗
NASA NTRS1993

Flowfield dynamics in blunt fin-induced shock wave/turbulent boundary layer interactions

Fluctuating wall pressure measurements were made on centerline upstream of a blunt fin in a Much 5 turbulent boundary layer. By examining the ensemble average wall pressure distributions for different fixed shock foot positions, it was shown that local fluctuating wall pressure measurements are due to a distinct pressure distribution, P(i), which undergoes a stretching and flattening effect as its upstream boundary translates aperiodically between the upstream influence and separation lines. The locations of the maxima and minima in the centerline wall standard deviation distribution can be accurately predicted using this distribution, providing quantitative confirmation of the model. This model also explains the observed cross-correlations and ensemble average measurements within the interaction. Using the P(i) model, wall pressure signals from under the separated flow region were able to reproduce the position-time history of the separation shock foot. The negative time delay peak in the cross-correlation between the predicted and actual shock foot histories shows that the separated region fluctuations precede shock foot motion.

Brusniak, L.↗
DOE OSTI2023

Core-scale numerical simulation and comparison of breakdown of shale and resulting fractures using sc-CO 2 and water as injectants

Supercritical carbon dioxide (sc-CO 2 ) is an alternative to water for stimulation of low permeability systems such as shale gas and geothermal resources. Previously core-scale experimental studies have compared the behavior of CO 2 to water injection for sample breakdown. Due to differences in experimental setup and core sample preparation, inconsistent or even apparently contradictory conclusions have resulted. To reconcile this contradiction, a phase-field numerical model is applied to understand hydraulic fracturing experiments using Green River shale found in the literature. The finite element numerical model incorporates a rate-dependent phase-field fracture model developed separately to describe fracture initiation and growth. We investigate the impact of various material and fluid properties on the resulting fractures. Most importantly, we study the effect of fluid properties and boundary conditions on the breakdown pressure, including the direction of the resulting fracture plane. Model results predict that (1) sc-CO 2 injection in the laboratory may result in greater breakdown pressure than that of water under no-flow boundary conditions because lower viscosity sc-CO 2 may result in pressure build up at the core boundary that opposes fracture initiation and (2) lower viscosity sc-CO 2 also produces fast-propagating fractures that are less influenced by the bedding plane on their resulting fracture topology. Here our model offers a straightforward explanation and reconciliation of existing experimental observations, as well as a means to extrapolate to new conditions. Exploration of field-scale conditions suggests less pronounced or no elevation in breakdown pressure when sc-CO 2 is injected because the pressure build up effect at the system boundary is significantly less or absent at field length scales.

42 ENGINEERING↗
NASA NTRS1999

The Interactions of a Flame and Its Self-Induced Boundary Layer

The interaction of a laminar flame with its self-generated boundary layer in a rectangular channel was numerically simulated using the two-dimensional, reacting, Navier-Stokes equations. A two species chemistry model was implemented which simulates the stoichiometric reaction of acetylene and air. Calculations were performed to investigate the effects of altering the boundary condition of the wall temperature, the Lewis number, the dynamic viscosity, and the ignition method. The purpose of this study was to examine the fundamental physics of the formation of the boundary layer and the interaction of the flame as it propagates into the boundary layer that its own motion has created.

Ott, James D.↗
DOE OSTI2020

The mechanisms and seasonal differences of the impact of aerosols on daytime surface urban heat island effect

The urban heat island intensity (UHII) is the temperature difference between urban areas and their rural surroundings. It is commonly attributed to changes in the underlying surface structure caused by urbanization. Air pollution caused by aerosol particles can affect the UHII through changing (1) the surface energy balance by the aerosol radiative effect (ARE) and (2) planetary-boundary-layer (PBL) stability and airflow intensity by modifying thermodynamic structure, which is referred to as the aerosol dynamic effect (ADE). By analyzing satellite data and ground-based observations collected from 2001 to 2010 at 35 cities in China and using the WRF-Chem model, we find that the impact of aerosols on UHII differs considerably: reducing the UHII in summer but increasing the UHII in winter. This seasonal contrast is proposed to be caused by the different strengths of the ARE and ADE between summer and winter. In summer, the ARE on UHII is dominant over the ADE, cooling down surface temperature more strongly in urban areas than in rural areas because of much higher aerosol loading, and offsets the urban heating, therefore weakening UHII. In winter, however, the ADE is more dominant, because aerosols stabilize the PBL more in the polluted condition, weakening the near-surface heat transport over urban areas in both vertical and horizontal directions. This means that the heat accumulated in urban areas is dispersed less effectively, and thus the UHII is enhanced. These findings shed new light on the impact of the interaction between urbanization-induced surface changes and air pollution on urban climate.urban areas and their rural surroundings. It is commonly attributed to changes in the underlying surface structure caused by urbanization. Air pollution caused by aerosol particles can affect the UHII through changing (1) the surface energy balance by the aerosol radiative effect (ARE) and (2) planetary-boundary-layer (PBL) stability and airflow intensity by modifying thermodynamic structure, which is referred to as the aerosol dynamic effect (ADE). By analyzing satellite data and ground-based observations collected from 2001 to 2010 at 35 cities in China and using the WRF-Chem model, we find that the impact of aerosols on UHII differs considerably: reducing the UHII in summer but increasing the UHII in winter. This seasonal contrast is proposed to be caused by the different strengths of the ARE and ADE between summer and winter. In summer, the ARE on UHII is dominant over the ADE, cooling down surface temperature more strongly in urban areas than in rural areas because of much higher aerosol loading, and offsets the urban heating, therefore weakening UHII. In winter, however, the ADE is more dominant, because aerosols stabilize the PBL more in the polluted condition, weakening the near-surface heat transport over urban areas in both vertical and horizontal directions. This means that the heat accumulated in urban areas is dispersed less effectively, and thus the UHII is enhanced. These findings shed new light on the impact of the interaction between urbanization-induced surface changes and air pollution on urban climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Extended defects-enhanced oxygen diffusion in ThO 2

Oxygen self-diffusion is key to understanding stoichiometry and defect structures in oxide nuclear fuels. Experimentally, low activation-barrier oxygen migration was found in ThO 2 , a candidate nuclear fuel, possibly due to short-circuit diffusion mechanisms. Here, we perform extensive molecular dynamics simulations to show that various types of extended defects can enhance oxygen self-diffusion with a much-reduced activation barrier in ThO 2 . In this work, we consider extended defects including 1D (dislocation), 2D (grain boundary), and 3D (void) defects. Due to the distinct characteristics of each type of extended defect, the modulation of oxygen diffusion varies. Further, these results provide a quantitative description of oxygen transport, which is significantly enhanced within a close distance (nanometer scale) from the extended defects. Among all these considered defects, grain boundary, particularly the low-energy $Σ$3 twin boundary, exhibits the strongest effect on increasing oxygen transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1994

Flowfield dynamics in blunt fin-induced shock wave/turbulent boundary layer interactions

Fluctuating wall pressure measurements have been made on centerline upstream of a blunt fin in a Mach 5 turbulent boundary layer. By examining the ensemble averaged wall pressure distributions for different separation shock foot positions, it has been shown that local fluctuating wall pressure measurements are due to a distinct pressure distribution, Rho(sub i), which undergoes a stretching and flattening effect as its upstream boundary translates aperiodically between the upstream influence and separation lines. The locations of the maxima and minima in the wall pressure standard deviation can be accurately predicted using this distribution, providing quantitative confirmation of the model. This model also explains the observed cross-correlations and ensemble average measurements within the interaction. Using the Rho(sub i) model, wall pressure signals from under the separated flow region were used to reproduce the position-time history of the separation shock foot. Further, the negative time delay peak in the cross-correlation between the predicted and actual shock foot histories suggests that the separated region fluctuations precede shock foot motion. The unsteady behavior of the primary horseshoe vortex and its relation to the unsteady separation shock are described.

Dolling, David S.↗
DOE OSTI2021

Study of the Atmospheric Boundary Layer Structure during AWAKEN (Final Report)

The American Wake Experiment (AWAKEN, https://openei.org/wiki/AWAKEN) is a collaborative, international field campaign funded by the Department of Energy (DOE) to study the dynamic and turbulent properties of wind farm wakes. The scope of the project ranges from studying individual turbine wakes, wake interactions within wind farms, to downstream wake effects of wind farms on the atmospheric boundary layer (ABL) and mesoscale environment. The latter effects influence the performance of wind farms deployed downwind and modify the weather and climate in the region. The focus of our project is on studying the mesoscale and boundary-layer effects of wind farms in more detail using advanced boundary-layer profiling facilities.

17 WIND ENERGY↗
NASA NTRS1988

A regional perspective on the palynofloral response to K-T boundary event(s) with emphasis on variations imposed by the effects of sedimentary facies and latitude

Palynological studies deal with fossil reproductive bodies that were produced by fully functioning plants, whereas most faunal studies are based on death assemblages. Therefore, changes in pollen and spore assemblages cannot be used directly as evidence of catastrophic mass killings but only to indicate changes in ecological conditions. The impact of the Cretaceous-Tertiary boundary event on terrestrial plant communities is illustrated by the degree, rate and selectivity of change. As in most classical palynological studies, the degree of change is expressed in terms of relative abundance and changes in species diversity. It is recognized that sampling interval and continuity of the rock record within individual sections can affect the percieved rate of change. Even taking these factors into account, a gradual change in relative abundance and multiple levels of apparent extinctions, associated with the interval bounding the K-T boundary, can be demonstrated. Climatic change, which locally exceeds the tolerance of individual species, and the possible loss of a group of pollinating agents are examined as possible explanations for the selectivity of apparent extinctions and/or locally truncated occurrences. The aspects of change are demonstrated with data from four different K-T boundary localities in Western Canada between paleolatitudes 60 and 75 deg north. Together, the four localities discussed allow changes imposed by latitude and differences in the depositional environment be isolated from the boundary event itself which is reflected by the truncated ranges of several species throughout the region of study. What must be recognized is that variations in the response of vegetation to the K-T boundary event(s) occurred throughout the Western Interior basin.

Sweet, A. R.↗
DOE OSTI2020

Impact of Vibrational Nonequilibrium on the Supersonic Mode in Hypersonic Boundary Layers

The supersonic mode in hypersonic boundary layers has recently been shown to achieve a larger peak growth rate than the traditional second mode in particular circumstances relevant to free flight. In this environment, high levels of aerodynamic heating are encountered such that incorporation of chemical and vibrational nonequilibrium effects can become critical. The impact of thermal nonequilibrium (TNE) on the supersonic mode in particular has not been thoroughly and systematically investigated. This work uses thermochemical nonequilibrium (TCNE) direct numerical simulation (DNS) and TCNE linear stability theory (LST) to obtain a more complete investigation of the supersonic mode using both nonequilibrium and frozen gas models. The simulation is Mach 5 flow over a 1-mm-nose-radius axisymmetric cone 1 m in length, representative of experimental conditions in ground test facilities. Both LST and DNS results indicate that TNE effects are destabilizing compared with frozen flow and can lead to an N-factor difference of approximately +1 at the end of the cone. LST results also indicate that TNE effects are stabilizing to the second and supersonic modes in comparison with thermal equilibrium. The supersonic mode appeared to be slightly more affected by TNE than the second mode. In conclusion, collectively, the findings in this work suggest that even in ground test facilities where TCNE effects are relatively small compared with free flight, incorporating nonequilibrium models in both the mean flow and stability solvers can have a practical effect on hypersonic boundary-layer transition prediction analyses.

42 ENGINEERING↗