SEARCH · Engineering Papers

Results for “blade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

All sources NASA NTRS DOE OSTI

NASA NTRS1974

High-tip-speed fiber composite compressor blades: Vibration and strength analysis

An analytical procedure is described which couples composite mechanics computer codes with NASTRAN. This procedure was used to perform a detailed analysis of a high-tip-speed fiber composite compressor fan blade. The results indicate that the various vibration modes of this blade are highly coupled. Mechanical load ply stresses are well below the corresponding room temperature strengths. Lamination residual stresses are likely to cause transply cracks and interply delamination. Transply cracks and relaxation of root fixity decrease the vibrational frequencies whereas centrifugal stiffening increases them. Comparisons of results for various parameters are presented in tabular and graphical form.

Chamis, C. C.↗

NASA NTRS1973

Blade Design

The design of turbine blading is considered that will produce the flow angles and velocities required by velocity diagrams consistent with the desired efficiency and/or number of stages. The determination of the size, shape, and spacing of the blades is fundamental.

Warner L Stewart↗

NASA NTRS1974

Aeroelastic stability of periodic systems with application to rotor blade flutter

The dynamics of a helicopter blade in forward flight are described by a system of linear differential equations with periodic coefficients. The stability of this periodic aeroelastic system is determined, using multivariable Floquet-Liapunov theory. The transition matrix at the end of the period is evaluated by: (1) direct numerical integration, and (2) a new, approximate method, which consists in approximating a periodic function by a series of step functions. The numerical accuracy and efficiency of the methods is compared, and the second method is shown to be superior by far. Results illustrating the effect of the periodic coefficients and various blade parameters are presented.

Friedmann, P.↗

NASA NTRS1974

Computer experiments on periodic systems identification using rotor blade transient flapping-torsion responses at high advance ratio

Computer experiments are described which used transient responses in flap-bending and torsion of a rotor blade at high advance ratio. It was found that a simple system identification method applying a linear sequential estimator also called equation of motion estimator, is suitable for this periodic system and can be used directly, if only the acceleration data are noise-polluted. In the case where noise is also present in the state-variable data, the direct application of the estimator gave poor results. However after prefiltering the data with a digital Graham filter having a cutoff frequency above the natural blade torsion frequency, the linear sequential estimator successfully recovered the parameters of the periodic coefficient analytical model.

Hohenemser, K. H.↗

NASA NTRS1974

High-tip-speed fiber composite compressor blades - Vibration and strength analyses

Chamis, C. C.↗

NASA NTRS1974

Lifting surface theory of axial compressor blade rows. I - Subsonic compressor. II - Transonic compressor

A linearized three-dimensional lifting surface theory is considered, taking into account relations to axisymmetric 'through-flow' or actuator disk theories, general results for flow within the blade row, relations to two-dimensional cascade theory, and finite blade and wake effects. Numerical results are presented, giving attention to the problem of wakeless flow and of wake flow. Expressions for wake functions are given in an appendix. The lifting line velocity potential employed by Namba (1972) is used as a starting point in the discussion of the lifting surface theory. A study of subsonic conditions is supplemented by an investigation of a transonic compresso, taking into account the general three-dimensional solution, induced velocities, and the acoustic pressure field.

Okurounmu, O.↗

NASA NTRS1975

A method for measuring cooling air flow in base coolant passages of rotating turbine blades

Method accurately determines actual coolant mass flow rate in cooling passages of rotating turbine blades. Total and static pressures are measured in blade base coolant passages. Mass flow rates are calculated from these measurements of pressure, measured temperature and known area.

Liebert, C. H.↗

NASA NTRS1974

Comparison of three methods for calculation of helicopter rotor blade loading and stresses due to stall

A comparison is made of the results of three methods for calculating the effects of dynamic stall on the performance, airloads, and blade stresses of a helicopter rotor at high loading. The three dynamic-stall methods considered predict essentially the same performance and trim for the rotor. They give roughly the same mean bending moments, but the peak-to-peak torsion and bending moments differ by 25 to 40 percent, and there are differences in the details of the predicted blade motion and stresses. The latter are due to significant differences in the dynamic stall aerodynamic loads, particularly the aerodynamic pitch moment, predicted by the three methods.

Johnson, W.↗

NASA NTRS1974

Blade selection for a modern axial-flow compressor

The procedures leading to successful design of an axial flow compressor are discussed. The three related approaches to cascade selection are: (1) experimental approach which relies on the use of experimental results from identical cascades to satisfy the velocity diagrams calculated, (2) a purely analytical procedure whereby blade shapes are calculated from the theoretical cascade and viscous flow equations, and (3) a semiempirical procedure which used experimental data together with the theoretically derived functional relations to relate the cascade parameters. Diagrams of typical transonic blade sections with uncambered leading edges are presented.

Wright, L. C.↗

NASA NTRS1974

Impact resistance of hybrid composite fan blade materials

Improved resistance to foreign object damage was demonstrated for hybrid composite simulated blade specimens. Transply metallic reinforcement offered additional improvement in resistance to gelatin projectile impacts. Metallic leading edge protection permitted equivalent-to-titanium performance of the hybrid composite simulated blade specimen for impacts with 1.27 cm and 2.54 cm (0.50 and 1.00 inch) diameter gelatin spheres.

Friedrich, L. A.↗

NASA NTRS1974

Some observations of the effects of radial distortions on performance of a transonic rotating blade row

A single rotating blade row was tested with two magnitudes of tip radial distortion and two magnitudes of hub radial distortion imposed on the inlet flow. The rotor was about 50 centimeters (20 in.) in diameter and had a design operating tip speed of approximately 420 meters per second (1380 ft/sec). Overall performance at 60, 80, and 100 percent of equivalent design speed generally showed a decrease (compared to undistorted flow) in rotor stall margin with tip radial distortion but no change, or a slight increase, in rotor stall margin with hub radial distortion. At design speed there was a decrease in rotor overall total pressure ratio and choke flow with all inlet flow distortions. Radial distributions of blade element parameters are presented for selected operating conditions at design speed.

Sandercock, D. M.↗

NASA NTRS1975

Two dimensional cold air cascade study of a film cooled turbine stator blade. 2: Experimental results of full film cooling tests

The effect of full film cooling on the performance of a turbine stator blade was studied in a two-dimensional cascade. The blade contained 12 rows of coolant holes, 6 rows on the suction surface and 6 on the pressure surface. Separate tests were first made with coolant ejection from each of the 12 rows. Then successive tests were made with various combinations of coolant rows open, including full film cooling. The principal results are presented in terms of primary-air efficiency as a function of coolant fraction. In addition, the efficiency results of the multirow tests are compared with the multi-row efficiency predicted by adding the single-row results.

Prust, H. W., Jr.↗

NASA NTRS1975

Flapping response characteristics of hingeless rotor blades by a gereralized harmonic balance method

Linearized equations of motion for the flapping response of flexible rotor blades in forward flight are derived in terms of generalized coordinates. The equations are solved using a matrix form of the method of linear harmonic balance, yielding response derivatives for each harmonic of the blade deformations and of the hub forces and moments. Numerical results and approximate closed-form expressions for rotor derivatives are used to illustrate the relationships between rotor parameters, modeling assumptions, and rotor response characteristics. Finally, basic hingeless rotor response derivatives are presented in tabular and graphical form for a wide range of configuration parameters and operating conditions.

Peters, D. A.↗

NASA NTRS1975

Experimental transient turbine blade temperatures in a research engine for gas stream temperatures cycling between 1067 and 1567 k

Experimental transient turbine blade temperatures were obtained from tests conducted on air-cooled blades in a research turbojet engine, cycling between cruise and idle conditions. Transient data were recorded by a high speed data acquisition system. Temperatures at the same phase of each transient cycle were repeatable between cycles to within 3.9 K (7 F). Turbine inlet pressures were repeatable between cycles to within 0.32 N/sq cm (0.47 psia). The tests were conducted at a gas stream temperature of 1567 K (2360 F) at cruise, and 1067 K (1460 F) at idle conditions. The corresponding gas stream pressures were about 26.2 and 22.4 N/sq cm (38 and 32.5 psia) respectively. The nominal coolant inlet temperature was about 811 K (1000 F).

Gauntner, D. J.↗

NASA NTRS1975

Influence of structural damping, preconing offsets and large deflection on the flap-lag-torsional stability of a cantilevered rotor blade

A set of equations describing the coupled flap-lag-torsional dynamics of a cantilevered rotor blade in hover is presented. This set of equations is used to evaluate the influence of structural damping, preconing and offsets on the linearized aeroelastic stability of some representative blade configurations. A number of examples illustrating the coupled nonlinear flap-lag-torsional response are considered.

Friedmann, P.↗

NASA NTRS1975

Structural response of fiber composite fan blades

A fiber composite airfoil, typical for high-tip speed compressor applications, is subjected to load conditions anticipated to be encountered in such applications, and its structural response is theoretically investigated. The analysis method used consists of composite mechanics embedded in pre- and post-processors and coupled with NASTRAN. The load conditions examined include thermal due to aerodynamic heating, pressure due to aerodynamic forces, centrifugal, and combinations of these. The various responses investigated include root reactions due to various load conditions, average composite and ply stresses, ply delaminations, and the fundamental modes and the corresponding reactions. The results show that the thermal and pressure stresses are negligible compared to those caused by the centrifugal forces. Also, the core-shell concept for composite blades is an inefficient design (core plies not highly stressed) and appears to be sensitive to interply delaminations. The results are presented in graphical and tabular forms to illustrate the types and amount of data required for such an analysis, and to provide quantitative data of the various responses which can be helpful in designing such composite blades.

Chamis, C. C.↗

NASA NTRS1977

Jet engine stator-blade removal tool

Instrument removes individual stator-blade seqments from J-85 jet engine without deforming blade or engine casing.

Diamond, D. D.↗

NASA NTRS1975

A numerical method for determining the natural vibration characteristics of rotating nonuniform cantilever blades

A method is presented for determining the free vibration characteristics of a rotating blade having nonuniform spanwise properties and cantilever boundary conditions. The equations which govern the coupled flapwise, chordwise, and torsional motion of such a blade are solved using an integrating matrix method. By expressing the equations of motion and matrix notation, utilizing the integrating matrix as an operator, and applying the boundary conditions, the equations are formulated into an eigenvalue problem whose solutions may be determined by conventional methods. Computer results are compared with experimental data.

White, W. F., Jr.↗