Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Gaseous fuels variation effects on first and second law analyses of a small direct injection engine for micro-CHP systems

This report examines the detailed energy and exergy distribution of a 34 cc (cc) air-cooled, two-stroke engine configured to operate on different natural gas (NG) compositions, pure methane, and propane. The engine was developed for application in a small, decentralized combined heat and power (CHP) system. It included optimized intake and exhaust resonators designed from Helmholtz resonance theory to promote effective scavenging. Operation occurred at wide-open-throttle (WOT) at an engine speed of 5400 revolutions per minute (RPM) with low-pressure direct injection (LPDI). Electronic ignition timing was adjusted for maximum brake torque (MBT) while the air-fuel ratio (AFR) was adjusted by injection duration, such that both rich and lean combustion were examined. In addition, start of injection (SOI) was adjusted to balance maximum fuel trapping and combustion stability. Full energy and exergy distribution analyses were completed, as engine operating regimes changed. Exergy was divided into work (available), lost (recoverable), and destructed availabilities. It was found that fuel loss and heat transfer contributed the most to exergy losses, accounting for around 15% and 9% of fuel exergy, respectively. Propane with the highest density, showed the highest in-cylinder trapped energy, heat transfer and, peak utilization factor (UF) of 85.3%. Due to fuel presence in the exhaust, lower 1st law efficiency did not necessarily result into a lower 2nd law efficiency. Higher mixture stratification with propane operation increased carbon monoxide (CO) emissions and hydrogen (H 2 ) content due to rich operation. CO oxidation could recover up to around 5% and 4% of injected fuel energy as heat for CHP system with propane and NG, respectively. Peak 2nd law efficiencies were around 60.5% while peak 1st law indicated efficiency was around 29%. This discrepancy was due to both exhaust hydrocarbon (HC from fuel slip and incomplete combustion) content, exhaust CO content, and heat loss availabilities.

03 NATURAL GAS↗

Evaluation of Performance Variables to Accelerate the Deployment of Sustainable Aviation Fuels at a Regional Scale

An increase in jet fuel consumption and its associated emissions across the world have led to the need for alternative technologies to produce sustainable aviation fuels (SAF). One option to produce SAFs is to utilize waste or biomass-based feedstocks that has the potential to reduce greenhouse gas emissions by 50% or more compared to conventional jet fuel. However, there is a lack of understanding of how the synergistic effects of key performance variables could hinder or help the deployment of aviation fuels on a regional scale. Here, we assess the implications of key variables-including type and quantity of waste/biomass feedstock availability near the airport, cost of SAF production, life cycle greenhouse gas (GHG) emissions, policies, and fuel/infrastructure logistics-on the deployment of SAF at Chicago's O'Hare International Airport. We consider three ASTM International-approved SAF technologies (Hydroprocessed Esters and Fatty Acids, Fischer-Tropsch, and Alcohol to Jet) that can be blended up to 50% with petroleum-based jet fuel. Results from our analysis show that woody biomass-based Fischer-Tropsch technology has the lowest fuel production costs ($2.31-$2.81/gallon gasoline equivalent) of all pathways, and it reduces life cycle GHG emissions by 86% compared to conventional jet fuel despite the higher availability of crop residues compared to either woody biomass or fats, oils, and greases. Also, infrastructure is available at O'Hare International Airport to blend SAF with Jet A fuel through three terminals directly connected to the airport via pipelines. Our sensitivity analysis shows renewable fuel incentives and feedstock price to be key performance variables affecting the production cost and deployment of SAF.

alcohol-to-jet↗

Optimal environmental and economic performance trade-offs for fifth generation district heating and cooling network topologies with waste heat recovery

Network topology greatly influences both the economic and environmental performance of fifth generation district heating and cooling (5GDHC) systems. In this study the optimal trade-offs between the environmental and economic performance of 5GDHC network topologies for a five-building district with waste heat recovery were explored. A life cycle assessment method was used to calculate the total life cycle CO 2 emissions (LCCO2) associated with the installation and operation of various network topologies. Twelve months of empirical data from a data center cooling system were analyzed to assess its suitability for integration into a 5GDHC system. The most suitable method for utilizing this waste heat was selected based on the ambient loop warm pipe setpoint, waste heat temperature, and district energy system configuration. A multi-objective optimization algorithm was used to select the 5GDHC network topology that provided the optimal trade-off between LCCO2 and life cycle cost (LCC). A trade-off parameter was employed to weigh the importance of each objective in the selection process. The results showed waste heat from the data center was suitable for integration into the 5GDHC system due to its availability and consistent temperature profile. When return temperatures of 25 °C or higher were available from the liquid-cooled system, direct pre-heating of the ambient loop warm pipe was found to be the most effective waste heat integration method. The selection of the network topology that provided the optimal trade-off between LCCO2 and LCC (optimal trade-off topology) was highly dependent on factors such as fuel prices, CO 2 prices, electricity CO 2 emissions factors, availability of waste heat, embodied CO 2 emissions associated with network installation and network infrastructure costs. Optimal trade-off topologies produced substantial LCCO2 reductions relative to corresponding LCC increases. LCCO2 reduction to LCC increase ratios from 5.78 to 117.79 were identified with CO 2 offset costs ranging from 4.77 to 60.08 ($/tCO 2 e).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Decomposing the Impact of Alternative Technology Sets on Future Carbon Emissions Growth

What are the drivers of future global carbon dioxide (CO2) emissions growth and how would the availability of key energy supply technologies change their relative importance? In this paper, we apply a novel index number decomposition technique to the results of a multi-region, multi-sector computable general equilibrium model to quantify the influence of five factors on the growth of future carbon emissions: (1) growth in global economic activity; (2) shifts in the regional composition of gross world product; (3) shifts in the sectoral composition of regions’ GDP; (4) changes in sectors’ energy–output ratios; and (5) changes in the CO2 intensity of energy sources. We elucidate how the relative importance of these factors changes in response to the imposition of a global carbon tax and alternative assumptions about the future availability of key energy supply technologies. Rising global economic activity and shifts in regional composition put upward pressure on emissions while changes in energy and emission intensity and the sectoral output mix have attenuating effects. A global emission tax that increases over time slows economic expansion and shifts the fuel mix, with the most pronounced impacts on China, India, and Russia. Limited availability of carbon capture and storage, nuclear, and hydroelectric generation all lead to upward shifts in the long-run marginal abatement cost curve, causing some countries to choose to pay the tax rather than abate.

Fisher-Vanden, Karen↗

Federal policy documentation and geothermal water consumption: Policy gaps and needs

With U.S. geothermal power production expected to more than triple by 2040, and the majority of this growth expected to occur in arid and water-constrained areas, it is imperative that decision-makers understand the potential long-term limitations to and tradeoffs of geothermal development due to water availability. To this end, water consumption data, including documentation triggered by the National Environmental Policy Act (NEPA) of 1969, production and injection data, and water permit data, were collected from state and federal environmental policy sources in an effort to determine water consumption across the lifecycle of geothermal power plants. Values extracted from these sources were analyzed to estimate water usage during well drilling; to identify sourcing of water for well drilling, well stimulation, and plant operations; and to estimate operational water usage at the plant level. Nevada data were also compared on a facility-by-facility basis with other publicly available water consumption data, to create a complete picture of water usage and consumption at these facilities. This analysis represents a unique method of capturing project-level water data for geothermal projects; however, a lack of statutory and legal requirements for such data and data quality result in significant data gaps, which are also explored

Schroeder, J. N.↗

Functional activity and functional gene diversity of a Cu-contaminated soil remediated by aided phytostabilization using compost, dolomitic limestone and a mixed tree stand

Trace elements (TEs) availability, biochemical activity and functional gene diversity was studied in a Cu-contaminated soil, revegetated for six years with a mixed stand of willow, black poplar, and false indigo-bush, and amended or not with compost plus dolomitic limestone (OMDL). The OMDL amendment significantly reduced Cu and As availability and soil toxicity, and increased the biochemical activity and microbial functional diversity assessed with the GEOCHIP technique, as compared to the unamended soil (Unt). The OMDL soil showed significantly higher abundance of 25 functional genes involved in decomposition organic compounds, and 11, 3 and 11 functional genes involved in the N, P and S biogeochemical cycles. Functional gene abundance was positively correlated with nutrient contents but negatively correlated with Cu availability and soil toxicity. The abundance of microbial functional genes encoding for resistance to various TEs also increased, possibly due to the microbial proliferation and lower Cu exposure in the presence of high total soil Cu concentration. Genes encoding for antibiotic resistance due to the co-occurrence of TEs and antibiotic resistant genes on genetic mobile elements. Finally, overall, phytomanagement confirmed its potential to restore the biological fertility and diversity of a severely Cu-contaminated soil, but the increase of TEs and antibiotic resistant gene abundances deserve attention in future studies.

54 ENVIRONMENTAL SCIENCES↗

Examination of lead concentrations in new decorative enamel paints in four countries with different histories of activity in lead paint regulation

Paints with high lead concentrations (ppm) continue to be sold around the world in many developing countries and those with economies in transition representing a major preventable environmental health hazard that is being increased as the economies expand and paint consumption is increasing. Prior lead paint testing had been performed in Brazil and India and these countries were selected to examine the impact of a new regulatory limit in Brazil and the impact of efforts of non-governmental organizations and others to stop the use of lead compounds in manufacturing paints. Armenia and Kazakhstan, in Central Asia, were selected because no information on lead concentration in those regions was available, no regulatory activities were evident and non-governmental organizations in the IPEN network were available to participate. Another objective of this research was to evaluate the lead loading (µg/cm{sup 2}) limit determined by X-Ray Fluorescence (XRF) for areas on toys that are too small to obtain a sample of sufficient size for laboratory analysis. The lead concentrations in more than three-fourths of the paints from Armenia and Kazakhstan exceeded 90 ppm, the limit in the United States, and 600 ppm, the limit in Brazil. The percentages were about one-half as high in Brazil and India. The average concentration in paints purchased in Armenia, 25,000 ppm, is among the highest that has been previously reported, that in Kazakhstan, 15,700 ppm, and India, 16,600, about median. The average concentration in Brazil, 5600 ppm, is among the lowest observed. Paints in Brazil that contained an average of 36,000 ppm before the regulatory limit became effective were below detection (<9 ppm) in samples collected in the current study. The lack of any apparent public monitoring of paint lead content as part of regulatory enforcement makes it difficult to determine whether the regulation was a major factor contributing to the decline in lead use in these paints. Using data from the current study and those available from other studies 24 of 28 paints from major brands in India decreased from high concentrations to 90 ppm or lower. Since lead concentrations in golden yellow paints from these brands were found to decrease to ≤90 ppm, it is possible that all 28 of these paints now contain ≤90 ppm since yellow paints usually have the highest lead concentrations. Other brands in Brazil and India that have been analyzed only one time had lead concentrations up to 59,000 ppm and 134,000 ppm, respectively. Less than one-third of the paints had notations on their labels with information about lead content and these were sometimes inaccurate. The label from one brand indicating “no added lead” contained paint with 134,000 ppm lead, the highest found in this study. Three percent (3 of 98) of the paints with surface lead loading that did not exceed 2 µg/cm{sup 2}, the limit established by the Consumer Product Safety Improvement Act for small areas on toys, contained greater than 90 ppm lead and thus were false negatives. Of the new paint samples that contained ≤600 ppm, 88% contained ≤90 ppm. Of the samples that contained ≤90 ppm, 97% contained ≤45 ppm and 92% contained ≤15 ppm. Based on these data it appears to be technically feasible to manufacture paints containing ≤90 ppm and in many cases to produce paints that have lead concentrations that do not exceed 15 ppm. - Highlights: • Brazilian paints with high lead (avg. 36,000 ppm) contained <9 ppm after regulation. • Lead in major Indian paint brands decreased to low levels by efforts of NGOs/others. • Most paints with lead ≤600 ppm also are ≤90 ppm and many also ≤15 ppm. • At the CPSIA limit of 2 µg Pb/cm{sup 2} for small areas on toys, 3% exceeded 90 ppm lead. • Most paint brands in Armenia and Kazakhstan based/manufactured outside the country.

54 ENVIRONMENTAL SCIENCES↗

Technology, technology, technology: An integrated assessment of deep decarbonization pathways for the Canadian oil sands

As a party to the Paris Agreement, Canada has an ambitious climate target of net-zero emissions by 2050. The country also holds the world's third largest oil reserves in the Alberta oil sands. Given increasing emissions from the oil sands sector, achieving Canada's net-zero target requires significant oil sands decarbonization. If, while phasing out fossil fuels, there is still a demand for Canadian oil sands, then the decarbonization of the resource production process becomes crucial. In this study, we use an enhanced version of the Global Change Analysis Model (GCAM) with a detailed unconventional oil sector for Canada, including mining and in situ resources. We ask, what is the future of the oil sands sector in deeply decarbonized global and Canadian economies? We address this question under four mitigation scenarios with varying global net-zero GHG emissions constraints, three additional representative lower carbon extraction technologies available for the oil sands sector, as well as global direct air capture (DAC) deployment. We find that lower carbon technology deployment allows a 20%–44% increase in oil sands production by 2050 for scenarios with net-zero GHG emissions in 2100 or 2075. DAC helps maintain oil sands production in the most ambitious global decarbonization scenario (net-zero GHG by 2050), without which low international oil demand makes Canadian oil sands production uncompetitive. Canadian oil sands production thus depends highly on the availability of lower carbon extraction technologies and international oil demand, which to a certain extent relies on the availability and global deployment of negative emissions technologies.

04 OIL SHALES AND TAR SANDS↗

Upgrades of edge, divertor and scrape-off layer diagnostics of W7-X for OP1.2

In this work, Wendelstein 7-X (W7-X) is the world’s largest superconducting nuclear fusion experiment of the optimized stellarator type. In the first Operation Phase (OP1.1) helium and hydrogen plasmas were studied in limiter configuration. The heating energy was limited to 4 MJ and the main purpose of that campaign was the integral commissioning of the machine and diagnostics, which was achieved very successfully. Already from the beginning a comprehensive set of diagnostics was available to study the plasma. On the path towards high-power, high-performance plasmas, W7-X will be stepwise upgraded from an inertially cooled (OP1.2, limited to 80 MJ) to an actively cooled island divertor (OP2, 10 MW steady-state plasma operation). The machine is prepared for OP1.2 with 10 inertially cooled divertor units, and the experimental campaign has started recently.The paper describes a subset of diagnostics which will be available for OP1.2 to study the plasma edge, divertor and scrape-off layer physics including those already available for OP1.1, plus modifications, upgrades and new systems. In conclusion, the focus of this summary will be on technical and engineering aspects, like feasibility and assembly but also on reliability, thermal loads and shielding against magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Globus Nexus: A Platform-as-a-Service provider of research identity, profile, and group management

Globus Nexus is a professionally hosted Platform-as-a-Service that provides identity, profile and group management functionality for the research community. Many collaborative e-Science applications need to manage large numbers of user identities, profiles, and groups. However, developing and maintaining such capabilities is often challenging given the complexity of modern security protocols and requirements for scalable, robust, and highly available implementations. By outsourcing this functionality to Globus Nexus, developers can leverage best-practice implementations without incurring development and operations overhead. Users benefit from enhanced capabilities such as identity federation, flexible profile management, and user-oriented group management. In this paper we present Globus Nexus, describe its capabilities and architecture, summarize how several e-Science applications leverage these capabilities, and present results that characterize its scalability, reliability, and availability.

Globus Nexus↗

ULAMA: A Utilization-Aware Matching Approach for robust on-demand spatial service brokers

This article investigates an on-demand spatial service broker for suggesting service provider propositions and the corresponding time of service to mobile consumers while meeting the consumer’s maximum travel time and wait time constraints. The goal of the broker is to maximize the number of matched requests while also keeping the “eco-system” functioning and robust against variations in the supply–demand ratio by engaging as many service providers as possible and maintaining providers’ participation to ensure that providers do not drop out. This problem is important because of its many related societal applications in the on-demand and sharing economy (e.g., on-demand ride-hailing services, on-demand food delivery, etc.). Challenges of this problem include the need to satisfy many conflicting requirements of the broker, consumers and service providers and the high computational complexity since solving the problem for a number of available consumers at any time instant is NP-hard. Related work in spatial crowdsourcing and ridesharing has mainly focused on maximizing the number of matched requests and minimizing travel cost, but did not consider the importance of maintaining provider engagement and balancing provider utilization, which could become a priority when the available supply exceeds the demand. In this paper, we propose a Utilization-Aware Matching Approach (ULAMA) which employs novel provider-centric heuristics for balancing the utilization of providers, and a consumer-priority-based greedy matching algorithm that prioritizes consumers for maximizing the number of matched requests. Experimental results show that our proposed approach outperforms related work by achieving the lowest variance in provider utilization while matching all available providers even when supply greatly exceeds demand. Our approach also achieved a larger number of matched requests, particularly when supply exceeds demand and also when both supply and demand are balanced.

97 MATHEMATICS AND COMPUTING↗

Automated generation of scientific workflow generators with WfChef

Scientific workflow applications have gained significant importance, and their automated and efficient execution on large-scale computing platforms has been the subject of extensive research and development. For these efforts to be successful, a solid experimental methodology is needed to evaluate workflow algorithms and systems. A foundation for this methodology is the availability of realistic workflow instances. Although public repositories provide workflow instances for a few scientific applications, these are limited in scope, and workflow instances are not available for all application scales of interest. To address this limitation, previous work has developed generators of synthetic workflow instances of arbitrary scales. Despite being popular, the implementation of these generators is a manual and labor-intensive process that requires expert application knowledge. As a result, these generators only target a handful of applications, even though there are hundreds of workflow applications in production. Here, we introduce WfChef , a fully automated framework for constructing a synthetic workflow generator for any scientific application. Based on an input set of workflow instances for a particular application, WfChef automatically produces a synthetic workflow generator. To measure the realism of the generated workflows, we define and evaluate several metrics. Using these metrics, we compare the realism of the workflows generated by WfChef generators to that of the workflows generated by the previously available, hand-crafted generators. We find that WfChef generators not only require zero development effort (because they are automatically produced), but also generate workflows that are more realistic than those generated by hand-crafted generators.

97 MATHEMATICS AND COMPUTING↗

Experimental and theoretical determinations of hydrogen isotopic equilibrium in the system CH 4 —H 2 —H 2 O from 3 to 200°C

The stable isotopic composition of methane (CH 4 ) is commonly used to fingerprint natural gas origins. Over the past 50 years, there have been numerous proposals that both microbial and thermogenic CH 4 can form in or later attain hydrogen isotopic equilibrium with water (H 2 O) and carbon isotopic equilibrium with carbon dioxide (CO 2 ). Evaluation of such proposals requires knowledge of the equilibrium fractionation factors between CH 4 and H 2 O or CO 2 at the temperatures where microbial and thermogenic CH 4 form in or are found in the environment, which is generally less than 200°C. Experimental determinations of these fractionation factors are only available above 200°C, requiring extrapolation of these results beyond the calibrated range or the use of theoretical calculations at lower temperatures. Here, we provide a calibration of the equilibrium hydrogen isotopic fractionation factor for CH 4 and hydrogen gas (H 2 ) ( D α CH4(g)–H2(g) ) based on experiments using γ-Al 2 O 3 and Ni catalysts from 3 to 200°C. Results were regressed as a 2 nd order polynomial of 1000 × ln D α CH4(g)–H2(g) vs. 1/T (K -1 ) yielding: 1000 × l n D α C H 4 ( g ) - H 2 ( g ) = 3.5317 × 10 7 T 2 + 2.7749 × 10 5 T - 179.48 We combine this calibration with previous experimental determinations of hydrogen isotope equilibrium between H 2 , H 2 O(g), and H 2 O(l) and we provide an interpolatable experimental calibration of 1000 × ln D α CH4(g)–H2O(l) from 3 to 200°C. Our resulting 4th order polynomial is the following equation: 1000 × l n D α C H 4 ( g ) - H 2 O l = - 7.9443 × 10 12 T 4 + 8.7772 × 10 10 T 3 - 3.4973 × 10 8 T 2 + 5.4398 × 10 5 T - 382.05 At 3°C, the value from our calibration differs by 93‰ relative to what would be calculated based on the extrapolation of the only experimental calibration currently available to temperatures below its calibrated range (lowest temperature of 200°C; Horibe and Craig, 1995). We additionally provide new theoretical estimates of hydrogen isotopic equilibrium between CH 4 (g), H 2 (g), and H 2 O(g) and carbon isotopic equilibrium between CH 4 (g) and CO 2 (g) using Path Integral Monte Carlo (PIMC) calculations. Our PIMC calculations for hydrogen isotopic equilibrium between CH 4 and H 2 agree 1:1 with our experiments. Finally, we compile carbon and hydrogen isotopic measurements of CH 4 , CO 2 , and H 2 O from various environmental systems and compare observed differences between carbon and hydrogen isotopes to those expected based on isotopic equilibrium. We find that isotopic compositions of some microbial gases from marine sedimentary, coalbed, and shale environments are consistent with those expected for CH 4 H 2 O(l) hydrogen and CH 4 CO 2 carbon isotopic equilibrium. In contrast, microbial terrestrial and pure culture gases are not consistent with both CH 4 H 2 O(l) hydrogen and CH 4 CO 2 carbon isotopic equilibrium. Overall, these results are explained qualitatively using previously developed conceptual models that link free energy gradients available to microorganisms to the degree that their enzymes can promote isotope-exchange reactions between CH 4 , CO 2 , and H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Repeated freeze-thaw cycles increase extractable, but not total, carbon and nitrogen in a Maine coniferous soil

Northeastern North America has been experiencing warmer winters with reduced snow accumulation, with more frequent winter freeze-thaw cycles. We conducted a laboratory experiment to investigate how increased frequency of freeze-thaw cycles (FTC) would alter soil C and N availability. Organic (O) and mineral (B) horizon soils were collected from a coniferous forest in Maine, processed to exclude roots, and then frozen in the laboratory (-10 °C) with one (FTC-1), two (FTC-2), or six (FTC-6) thaw periods. Soils were analyzed for extractable inorganic ammonium (NH4-N), water extractable organic carbon (WEOC), carbon dioxide flux (respiration), and total C and N. Extractable NH4-N increased following FTC, for both horizons. WEOC in O horizons had a lower SUVA254, indicating a stronger microbial influence (i.e., microbial cell lysis) in these soils after FTC. Respiration in O horizon soils decreased post-incubation and did not differ between FTC and Control soils. In the B horizon, however, FTC soils showed greater respiration than Control soils, suggesting that the newly available nutrients may have stimulated microbial activity. In contrast to these results, total C and N remained unaltered by FTC, presumably because the FTC disturbances represented mostly a translocation of C and N from one pool into another, and losses due to respiration were too small to significantly influence the large TC and TN pools. The effect of FTC on NH4-N did not change with FTC frequency, suggesting that a single FTC is sufficient to alter both C and N availability and quality, and that additional FTC may not have a significant further effect. This study provides fresh insights on how organic and mineral soils might respond to increased freeze-thaw frequency in winter.

Patel, Kaizad F.↗

A probabilistic application of oil and gas data for exploration stage geothermal reservoir assessment in the Appalachian Basin

Geothermal energy is a renewable, widespread, baseload energy source that has the potential to supply a large portion of the world’s energy needs. High development risk, specifically high drilling costs combined with uncertainty in subsurface flow properties, have hampered growth of geothermal energy development. One option to reduce subsurface risk is to target locations where reservoir data are already available, including sedimentary basins where there has been extensive hydrocarbon production. Sedimentary basins are widespread and often have suitable geothermal gradients. This chapter presents a low-cost methodology that can be used at the pre-drilling exploration phase of a low-temperature geothermal project to predict the location of high-productivity and low-risk reservoirs, applied to a case study of the Appalachian Basin in the eastern United States. Because only averaged reservoir data were available for analysis, the technique uses a Monte Carlo simulation of the Reservoir Flow Capacity (RFC) and Reservoir Productivity Index (RPI) for over 1800 individual reservoirs, using liquid water or supercritical carbon dioxide (sCO 2 ) as the reservoir fluid. RFC is used as an initial screening tool to identify high-priority geologic formations and reservoirs. Here our results indicate that 99% of the reservoirs in the basin are of insufficient quality for geothermal heat production with water as the assumed fluid and without using stimulation technologies associated with Enhanced Geothermal Systems (EGS). RPI is also used as an alternative metric to identify high-productivity reservoirs. When comparing the RPI results to natural gas production volumes from several selected reservoirs, the predicted RPI proves to be a good estimate of flow potential for porous reservoirs, but overestimates flow by a factor of three for fractured or vuggy reservoirs. A greater uncertainty ought to be utilized when applying the RPI equation to non-porous media, therefore we recommend utilizing the RPI metric when higher resolution data are available for analysis. This methodology can be utilized in other basins that have experienced hydrocarbon exploration and production, to highlight low-risk reservoirs or geologic formations for further geothermal development.

15 GEOTHERMAL ENERGY↗

Emerging anomaly detection techniques for electronic health records: A survey

Background Anomaly detection in electronic health records (EHRs) is a cornerstone of biomedical informatics, with direct implications for patient safety, clinical decision-making, and the prevention of healthcare fraud. Once guided primarily by simple rule-based methods, the field has advanced rapidly, driven by increased computing power, richer and more detailed health data, and the rise of machine learning and deep learning techniques. The objective of this paper is to provide a comprehensive overview of modern approaches to detecting anomalies in EHRs, outlining their strengths, limitations, and relevance to key healthcare challenges. We review traditional statistical methods alongside newer ML- and DL-based strategies and hybrid models, with particular attention to how these techniques support transparency and build clinical trust. Methods This paper presents a thorough and critical survey through systematic review (PRISMA-based) of the latest anomaly detection strategies in time-sequence data domains within electronic health record systems. Results We explore a broad spectrum of methodologies, including statistical models, supervised and unsupervised learning approaches, hybrid frameworks, and state-of-the-art ML-based techniques that collectively advance the precision and scalability of detecting anomalies in complex clinical datasets. In addition to mapping current capabilities, we address the enduring challenges that hinder widespread implementation and provide a forward-looking perspective on the future of anomaly detection in the data-rich landscape of modern healthcare. Summary The advancement in AI-based approaches is reported along with the basic principles of the individual approaches and their applicability. The increased availability of high-quality data, advancements in DL approaches, and enhanced computation power are leading to more frequent adaptation of DL-based approaches. Emerging DL-based approaches that have been adapted in other domains or recently applied in the EHR domain are also discussed in detail. Although DL-based approaches can improve model predictions by incorporating comorbidities, their application is limited in low-frequency data domains (e.g., when the total available data remains in the single digits). Therefore, the user must carefully consider the application based on data availability.

Anomaly detection↗

Predicting demand for hydrogen station fueling

Full function hydrogen stations are a reality; fuel cell electric vehicle drivers can pull up to commercial fueling stations and receive 3–5 kg in less than 5 min, for an approximately 300-mile range. The demand for hydrogen is increasing, driven by an increase in the fueling of public and private fuel cell vehicles. This study describes the development and value of a model that simulates stochastic future demand at a hydrogen filling station. The predictive hydrogen demand model described in this article is trained from mathematical models constructed from actual hydrogen fill count, amount, and frequency data. Future fill probabilities inform the hour-by-hour demand profile and the station state of either “available, ready to fill” or “available, filling”. For example, a prediction for a station generally dispensing 5,000 kg a week on a Friday afternoon at 4 p.m. is 16 fills, totaling 48.7 kg, with a 0.52 proportion of time spent in “available, filling” state yielding 31 min of filling time. This is a first-of-its kind, published study on predicting future hydrogen demand by the time of day (e.g., hour-by-hour intervals) and day of week. This study can be used for hydrogen station requirements and operation and maintenance strategies and to assess the impact of demand variations and scenarios. Finally, this article presents the current status of hydrogen demand, the model development methods, a set of sample results. Discussion and conclusions concentrate on the value and use of the proposed model.

08 HYDROGEN↗