Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Microcomputer Checks Butt-Weld Accuracy

Electrical gage and microcomputer eliminate time-consuming manual measurements. Alinement and angle of plates on either side of butt weld are measured and recorded automatically by hand-held gage and desk-top microcomputer. Gage/micro-computer quickly determine whether weld is within dimensional tolerances or whether reworking is needed. Microcomputer prints out measurements while operator moves gage from point to point along weld. Out-of-tolerance measurements are marked by an asterisk on printout.

Clisham, W.↗
NASA NTRS1980

Autonomous navigation accuracy using simulated horizon sensor and sun sensor observations

A relatively simple autonomous system which would use horizon crossing indicators, a sun sensor, a quartz oscillator, and a microprogrammed computer is discussed. The sensor combination is required only to effectively measure the angle between the centers of the Earth and the Sun. Simulations for a particular orbit indicate that 2 km r.m.s. orbit determination uncertainties may be expected from a system with 0.06 deg measurement uncertainty. A key finding is that knowledge of the satellite orbit plane orientation can be maintained to this level because of the annual motion of the Sun and the predictable effects of Earth oblateness. The basic system described can be updated periodically by transits of the Moon through the IR horizon crossing indicator fields of view.

Pease, G. E.↗
NASA NTRS1980

Development of alternative data analysis techniques for improving the accuracy and specificity of natural resource inventories made with digital remote sensing data

An investigation was conducted into ways to improve the involvement of state and local user personnel in the digital image analysis process by isolating those elements of the analysis process which require extensive involvement by field personnel and providing means for performing those activities apart from a computer facility. In this way, the analysis procedure can be converted from a centralized activity focused on a computer facility to a distributed activity in which users can interact with the data at the field office level or in the field itself. A general image processing software was developed on the University of Minnesota computer system (Control Data Cyber models 172 and 74). The use of color hardcopy image data as a primary medium in supervised training procedures was investigated and digital display equipment and a coordinate digitizer were procured.

Lillesand, T. M.↗
NASA NTRS1980

Accuracy of trace element determinations in alternate fuels

A review of the techniques used at Lewis Research Center (LeRC) in trace metals analysis is presented, including the results of Atomic Absorption Spectrometry and DC Arc Emission Spectrometry of blank levels and recovery experiments for several metals. The design of an Interlaboratory Study conducted by LeRC is presented. Several factors were investigated, including: laboratory, analytical technique, fuel type, concentration, and ashing additive. Conclusions drawn from the statistical analysis will help direct research efforts toward those areas most responsible for the poor interlaboratory analytical results.

Greenbauer-Seng, L. A.↗
NASA NTRS1981

Improvements to the accuracy of the IUE wavelength scales in high dispersion

The data base of Pt-Ne emission lines used to calibrate the IUE high dispersion wavelength scales was scrutinized to improve the internal consistency of the adopted laboratory wavelength values and provide a homogeneous, documented line list, which IUE Guest Observers may use to evaluate quantitatively those Pt-Ne spectra taken to calibrate their data. After deletion of incorrect or inappropriate data in the old data base (lines with incorrect wavelength assignments; lines which are too faint, too bright, or blended; lines which fall near reseau marks, etc.) and the addition of several new entries, a total of 172 Pt-Ne lines for the SWP camera and 164 Pt-Ne lines for the LWR camera are now used for routine wavelength calibration in the high dispersion mode.

Turnrose, B. E.↗
NASA NTRS1981

Prospects for TLRS baseline accuracies in the western USA

One of the main goals of the LAGEOS satellite mission is the detection of regional geotectonic movements. A parametric study with the intention to obtain the optimal baseline precision from dynamic solutions of laser ranging to LAGEOS is presented. The varied parameters are: length of reduced arc, number of tracking stations, data noise and rate, biases, refraction errors, system efficiency, gravity model errors in the value of GM. The baseline precisions are 1-10 cm depending upon the set of parameters adopted. General principles obtained are also presented.

Christodoulidis, D.↗
NASA NTRS1981

Development of alternative data analysis techniques for improving the accuracy and specificity of natural resource inventories made with remote sensing data

The applicability of digital LANDSAT data in updating the Minnesota Lake Land Management Information System and in assessing the trophic status of lakes was investigated. Data from various combinations of training, classification, and geometric correction techniques were compared to a photointerpreted reference data set consisting of ground-verified samples and six randomly selected photographs covering approximately one quarter of the study area. For a reconnaissance inventory, the training via polygons selected from aerial photographs with a canonical analysis minimum distance classifier is the most accurate and efficient analysis technique. The applications test project resulted in disappointing thematic classification results per se, but did contribute to the development of mechanisms for implementing a LANDSAT data processing capability in the State Planning Agency on a permanent basis.

Lillesand, T. M.↗
NASA NTRS1980

Accuracy of trace element determinations in alternate fuels

NASA-Lewis Research Center's work on accurate measurement of trace level of metals in various fuels is presented. The differences between laboratories and between analytical techniques especially for concentrations below 10 ppm, are discussed, detailing the Atomic Absorption Spectrometry (AAS) and DC Arc Emission Spectrometry (dc arc) techniques used by NASA-Lewis. Also presented is the design of an Interlaboratory Study which is considering the following factors: laboratory, analytical technique, fuel type, concentration and ashing additive.

Greenbauer-Seng, L. A.↗
NASA NTRS1980

On the use of pressure broadening data to assess the accuracy of CO-He interaction potentials

The results of SCF-CI calculations of the intermolecular potential surface for CO and He are compared with pressure broadening data. Coupled states calculations were performed for both the electron gas and the more accurate SCF-CI potentials at collision energies from 15 to 1200/cm, and Boltzmann averages over collision energy were taken to compare with experimental results at liquid nitrogen (77 K), dry ice (195 K) and room (295 K) temperatures. The cross sections from the SCF-CI potential are shown to be in slightly better agreement with experiment than those from the electron gas potential, although both are consistent with the data to within experimental uncertainties. Closer examination of the experimental results reveals that this essential equivalence is due not to any inherent insensitivity of the pressure broadening technique, but to the uncertainties in the experimental values. It is thus concluded that more accurate experimental values are required to place meaningful constraints on the intermolecular potential.

Green, S.↗
NASA NTRS1981

Accuracy and stability of time-split finite-difference schemes

In a recently published work by Abarbanel and Gottlieb (1980), a new class of explicit time-split algorithms designed for application to the compressible Navier-Stokes equations was developed. These algorithms, which utilize locally-one-dimensional (LOD) spatial steps, were shown to possess stability characteristics superior to those of other time-split schemes. In the present work, the properties of an implicit LOD method, analogous to the Abarbanel-Gottlieb algorithm, are examined using the two-dimensional heat conduction equation as the test problem. Both temporal and spatial inconsistencies inherent in the scheme are identified, and a new consistent, implicit splitting approach is developed and applied to the linear Burgers' equation. The relationship between this new method and other time-split implicit schemes is explained and stability problems encountered with the method in three dimensions are discussed.

Dwoyer, D. L.↗
NASA NTRS1983

Measuring Mirror Tilt With High Accuracy

Stroboscopic technique freezes mirror motion so displacements can be measured. Improved autocollimator accurately measures angular tilt of plane mirrors in rotational or reciprocating motion. Device is conventional autocollimator in which steady light source is replaced by stroboscope synchronized with mirror motion. It is accurate to 1 second of arc.

Magner, T. J.↗
NASA NTRS1982

Monte Carlo studies of ocean wind vector measurements by SCATT: Objective criteria and maximum likelihood estimates for removal of aliases, and effects of cell size on accuracy of vector winds

The scatterometer on the National Oceanic Satellite System (NOSS) is studied by means of Monte Carlo techniques so as to determine the effect of two additional antennas for alias (or ambiguity) removal by means of an objective criteria technique and a normalized maximum likelihood estimator. Cells nominally 10 km by 10 km, 10 km by 50 km, and 50 km by 50 km are simulated for winds of 4, 8, 12 and 24 m/s and incidence angles of 29, 39, 47, and 53.5 deg for 15 deg changes in direction. The normalized maximum likelihood estimate (MLE) is correct a large part of the time, but the objective criterion technique is recommended as a reserve, and more quickly computed, procedure. Both methods for alias removal depend on the differences in the present model function at upwind and downwind. For 10 km by 10 km cells, it is found that the MLE method introduces a correlation between wind speed errors and aspect angle (wind direction) errors that can be as high as 0.8 or 0.9 and that the wind direction errors are unacceptably large, compared to those obtained for the SASS for similar assumptions.

Pierson, W. J.↗
NASA NTRS1982

Effects of cable geometry and aircraft attitude on the accuracy of a magnetic leader cable system for aircraft guidance during rollout and turnoff

A theoretical analysis of a single wire magnetic leader cable system for aircraft rollout and turnoff guidance was performed to determine the errors produced by the leader cable installation geometry and aircraft attitude. It was found that errors in the measurement of lateral displacement from the cable are smaller than errors in the measurement of aircraft heading and that both errors are smallest at or near the cable.

Bundick, W. T.↗
NASA NTRS1981

Effects of rain and fog on the Shuttle Ku-band microwave scanning beam landing system range and accuracy performance

The microwave Scanning Beam Landing System's (MSBLS) performance in fog and rain was studied. The fog and rain effects on the Shuttle Ku-band system were determined. Specifically, microwave attenuation, beam distortion, and coordinate errors resulting from operation of the MSBLS in poor weather conditions were evaluated. The main physical processes giving rise to microwave attenuation were found to be absorption and scattering by water droplets. The general theory of scattering and absorption used is discussed and a listing of applicable computer programs is provided.

Butler, D.↗
NASA NTRS1981

An analysis of LANDSAT MSS scene-to-scene registration accuracy

Measurements were made for 12 registrations done by ERL for 8 registrations done by SRS. The results indicate that the ERL method is significantly more accurate in five of the eight comparison. The difference between the two methods are not significant in the other three cases. There are two possible reasons for the differences. First, the ERL model is a piecewise linear model and the EDITOR model is a cubic polynomial model. Second, the ERL program resamples using bilinear interpolation while the EDITOR software uses a nearest neighbor resampling. This study did not indicate how much of the difference is attributable to each factor. The average of all merged scene error values for ERL was 31.6 meters and the average for the eight common areas was 32.6 meters. The average of the eight merged scene error values for SRS was 40.1 meters.

Seyfarth, B. R.↗
NASA NTRS1982

Misregistration's effects on classification and proportion estimation accuracy

The estimates of crop type and acreage are undertaken in the AgRISTARS program by registering multiple date acquisitions of small subareas of LANDSAT scenes (termed segments), and applying multispectral analysis to them. An important contribution to errors in classification and acreage estimates is misregistration between multiple acquisitions. The formula used to express this relationship is given and the operations applied are so shown in diagrams. The taking of a LANDSAT feature vector and the derivation of the brightness and greeness are illustrated. It is shown that for any given sensor IFOV geometry, typical populations of fields can be derived and histograms can be plotted of the number of fields against field size according to ground truth. As a function of the resolution element, the IFOV of the sensor can draw the proportion of pure pixels in a given crop. Because the thematic mapper has a smaller resolution, the proportion of pixels that are pure in any given area will be larger.

Juday, R. D.↗