Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ULTRASOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Full-waveform inversion and least-squares reverse-time migration imaging of collimated ultrasonic-beam data for high-resolution wellbore integrity monitoring

Los Alamos National Laboratory (LANL) has recently developed an ultrasonic side-lobe suppressed Bessel collimated beam transducer for low-frequency imaging through highly attenuating materials. In this paper, we study the effectiveness of using such a collimated ultrasonic-beam transducer for imaging concrete heterogeneities outside borehole casing for high-resolution borehole imaging and wellbore integrity monitoring. We obtain detailed concrete heterogeneities including a low-velocity zone using ultrasound data acquired with a 3D imaging prototype and our recently developed full-waveform inversion and least-squares reverse-time migration methods. Full-waveform inversion fits synthetic ultrasonic waveforms with recorded waveforms to build a high-resolution velocity model. Least-squares reverse-time migration produces a high-resolution structural image showing material discontinuities. Finally, our results demonstrate that LANL's 3D imaging system with a collimated ultrasonic-beam transducer together with full-waveform inversion and least-squares reverse-time migration imaging has great potential for high-resolution single-well borehole imaging and non-destructive evaluation.

47 OTHER INSTRUMENTATION↗

Microstructure-based model of nonlinear ultrasonic response in materials with distributed defects

Nonlinear ultrasonic technique is one of promising NDE methods for monitoring defect evolution in irradiated nuclear materials. In this work, we have studied the effect of distributed defects on nonlinear ultrasonic response, in particular, the nonlinear parameter ß from the 2nd harmonic wave. A three-dimensional microstructure-based model has been developed for investigating the dynamic interaction between distributed defects and a propagating longitudinal sound wave. Both linear and nonlinear materials are considered. It is known that the 2nd harmonic wave is generated when a monochromatic wave propagates in a nonlinear elastic material. The results show that second phase particles with elastic heterogeneity and lattice mismatch have strong impact on the nonlinear parameter ß. Lattice mismatches have more effect on the nonlinear parameter no matter they are expansion or contraction. The developed model enables one to explore the contributions of different types of defects to the nonlinear ultrasonic signals and shed light on the development of nonlinear ultrasound nondestructive detection of material defects in nuclear reactors.

Second harmonic generation, Scattered distributed ↗

Lattice hardening due to vacancy diffusion in (GeTe) m Sb 2 Te 3 alloys

GeTe-Sb 2 Te 3 alloys have been widely studied for use in rewritable media, and in recent years, they have emerged as excellent thermoelectric materials, with reports of z T > 2 for Ge-rich compositions. GeTe-Sb 2 Te 3 alloys exhibit a solid-state phase transition from a layered structure with rhombohedral symmetry to a cubic rocksalt structure, which plays an important role in their thermoelectric behavior. In this work, we investigate the impact of the phase transition on the thermal expansion and elastic moduli of (GeTe) 17 Sb 2 Te 3 using high-temperature X-ray diffraction and resonant ultrasound spectroscopy. The high-temperature elastic moduli of GeTe, Sb 2 Te 3 , and Bi 2 Te 3 were also measured for comparison. Although it is typical for materials to soften with increasing temperature due to thermal expansion, our study reveals anomalous hardening of the elastic moduli in (GeTe) 17 Sb 2 Te 3 at temperatures below the phase transition, followed by further hardening at the transition temperature. In contrast, the elastic moduli of GeTe, Sb 2 Te 3 , and Bi 2 Te 3 soften with increasing temperature. We attribute the anomalous hardening of (GeTe) 17 Sb 2 Te 3 to the gradual vacancy diffusion accompanying the transition from a layered to a cubic structure. The stiffening elastic moduli lead to increasing speed of sound, which impacts the lattice thermal conductivity by flattening the temperature dependence.

36 MATERIALS SCIENCE↗

Criteria for formation of low-frequency sound under wide-aperture repetitively pulsed laser irradiation of solids

The criteria for merging shock waves formed by optical breakdowns on the surface of solids have been investigated. Targets made of different materials were successively irradiated by two CO{sub 2}-laser pulses with energies up to 200 J and a duration of {approx}1 {mu}s. It is shown that the criteria under consideration can be applied to different targets and irradiation regimes and make it possible to calculate the parameters of repetitively pulsed laser radiation that are necessary to generate low-frequency sound and ultrasound in air.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental determination and the theoretical model of an equivalent temperature of nonlinear optical crystals interacting with high-power laser radiation

We present the results of the use of resonant ultrasound spectroscopy to study changes in temperature of crystals during their interaction with high-power laser radiation. To measure the nonuniform temperature of a crystal, use is made of the frequency (calibrated at uniform temperature {theta}) of the nth mode of the piezoelectric resonance Rf{sub n}({theta}) and its change {Delta}Rf{sub n}(P{sub in}) upon crystal irradiation by laser light with an average power P{sub in}. A spatially inhomogeneous distribution of thermodynamic temperature in the crystal at a fixed laser power P{sub in} is set in correspondence with equivalent temperature {theta}{sub eq}(P{sub in}), defined in this paper. A mathematical model is proposed, justifying the correctness of its introduction. This parameter can be used to study any piezoelectric crystals interacting with laser radiation. (nonlinear optical phenomena)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Visualisation of distribution of gold nanoparticles in liver tissues ex vivo and in vitro using the method of optical coherence tomography

The possibility of visualising the distribution of gold nanoparticles in liver by means of the method of optical coherence tomography is studied experimentally in model samples of beef liver in vitro and rat liver ex vivo. In the experiments we used the gold nanoparticles in the form of nanocages with resonance absorption in the near-IR spectral region. In the model studies the suspension of nanoparticles was applied to the surface of the sample, which then was treated with ultrasound. In the ex vivo studies the suspension of nanoparticles was injected to the laboratory rats intravenously. The image contrast and the optical depth of detection of blood vessels and liver structure components are calculated, as well as the depth of liver optical probing before and after the injection of nanoparticles. It was shown that the administration of the nanoparticle increases significantly the imaging contrast of liver blood vessels owing to the localisation of the nanoparticles therein.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of the optical properties of surface nanostructures for photoacoustic converters

A computer model has been developed and a theoretical study has been performed for nanostructures in the form of a two-dimensional monolayer of nanoparticles of noble metals on an optical fibre end face. The parameters of nanostructure-based photoacoustic converters are chosen for different environments in order to provide a high light absorption coefficient, which, in turn, provides a maximally high conversion efficiency for ultrasound generation. It is established that efficient photoacoustic conversion can be implemented in a surface nanostructure composed of spherical gold nanoparticles, located on an optical fibre end face in water, in wide ranges of the nanostructure microscopic parameters. It is shown that the backscattering coefficient also turns out large in the case of resonance absorption; for this reason, one must provide optical isolation of a laser in use when designing photoacoustic generators. (nanostructures)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Absence of Jahn-Teller transition in the hexagonal Ba 3 CuSb 2 O 9 single crystal

With decreasing temperature, liquids generally freeze into a solid state, losing entropy in the process. However, exceptions to this trend exist, such as quantum liquids, which may remain unfrozen down to absolute zero owing to strong quantum entanglement effects that stabilize a disordered state with zero entropy. Examples of such liquids include Bose-Einstein condensation of cold atoms, superconductivity, quantum Hall state of electron systems, and quantum spin liquid state in the frustrated magnets. Furthermore, recent studies have clarified the possibility of another exotic quantum liquid state based on the spin-orbital entanglement in FeSc2S4. To confirm this exotic ground state, experiments based on single-crystalline samples are essential. However, no such single-crystal study has been reported to date. Here, we report, to our knowledge, the first single-crystal study on the spin-orbital liquid candidate, 6H-Ba3CuSb2O9, and we have confirmed the absence of an orbital frozen state. In strongly correlated electron systems, orbital ordering usually appears at high temperatures in a process accompanied by a lattice deformation, called a static Jahn-Teller distortion. By combining synchrotron X-ray diffraction, electron spin resonance, Raman spectroscopy, and ultrasound measurements, we find that the static Jahn-Teller distortion is absent in the present material, which indicates that orbital ordering is suppressed down to the lowest temperatures measured. Lastly, we discuss how such an unusual feature is realized with the help of spin degree of freedom, leading to a spin-orbital entangled quantum liquid state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Indications of flat bands driving the δ to α volume collapse of plutonium

On cooling from the melt, plutonium (Pu) undergoes a series of structural transformations accompanied by a ≈ 28% reduction in volume from its δ phase to its α phase at low temperatures. While Pu’s partially filled 5 f -electron shells are known to be involved, their precise role in the transformations has remained unclear. By using calorimetry measurements on α -Pu and gallium-stabilized δ -Pu combined with resonant ultrasound and X-ray scattering data to account for the anomalously large softening of the lattice with temperature, we show here that the difference in electronic entropy between the α and δ phases dominates over the difference in phonon entropy. Rather than finding an electronic specific heat characteristic of broad f -electron bands in α -Pu, as might be expected to occur within a Kondo collapsed phase in analogy with cerium, we find it to be indicative of flatter subbands. An important role played by Pu’s 5 f electrons in the formation of its larger unit cell α phase comprising inequivalent lattice sites and varying bond lengths is therefore suggested.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On the Glass Transition Temperature and the Elastic Properties in Zr-Based Bulk Metallic Glasses

The temperature dependence of the elastic moduli was estimated from ultrasound time of flight measurements performed on bulk metallic glasses of composition Zr{sub 63-x}Cu{sub 24}Al{sub x} Ni{sub 10}Co{sub 3}. Using the corresponding values at the glass transition temperature, the local atomic strain was determined. The obtained values for the critical atomic strain calculated for 8 at% < x < 15 at% are close to the predicted universal criterion derived from a topological model, but may also reflect the difference in the chemical interaction that are not accounted by a topological approach.

36 MATERIALS SCIENCE↗

Thermomechanical Properties of Hafnium Hydride for Radiation Shielding in Tokamak Devices

The development of effective neutron shielding materials is of paramount importance for the progression of fusion technologies with the aim of producing clean and sustainable energy for future generations. This study demonstrates the successful fabrication of a promising candidate material for shielding applications, hafnium hydride, through the powder metallurgy process. Powder metallurgy fabrication resulted in the production of 91% dense, crack-free, ε-phase HfH 2 pellets with a hydrogen-to-metal ratio of 1.89 to 2.00. Resonant ultrasound spectroscopy (RUS) was used to measure a Young’s modulus of 34.52 ± 2.70 GPa and a shear modulus of 12.25 ± 0.18 GPa. Nanoindentation techniques have been used to establish a hardness value of 4.45 ± 1.63 GPa, and a Young’s modulus of 47.8 ± 6.4 GPa was determined using Poison’s ratio from RUS. Hydrogen release was measured using thermogravimetric analysis and appeared to occur in three different regimes as the sample transitioned through the ε- and δ-phases. Heat capacity matched literature data up to 600 K, after which a rapid increase was observed due to phase transformations occurring with hydrogen loss.

Hafnium hydride↗

Simultaneous inversion of shear modulus and traction boundary conditions in biomechanical imaging

We present a formulation to simultaneously invert for a heterogeneous shear modulus field and traction boundary conditions in an incompressible linear elastic plane stress model. Our approach utilizes scalable deterministic methods, including adjoint-based sensitivities and quasi-Newton optimization, to reduce the computational requirements for large-scale inversion with partial differential equation (PDE) constraints. Here, we address the use of regularization for such formulations and explore the use of different types of regularization for the shear modulus and boundary traction. We apply this PDE-constrained optimization algorithm to a synthetic dataset to verify the accuracy in the reconstructed parameters, and to experimental data from a tissue-mimicking ultrasound phantom. In all of these examples, we compare inversion results from full-field and sparse data measurements.

42 ENGINEERING↗

On the absence of a positive sound dispersion in the THz dynamics of glycerol: an inelastic x-ray scattering study

The high frequency transport properties of glycerol are derived from inelastic x-ray scattering spectra measured at different pressures and compared with ultrasound absorption data. As a result, the presence of two distinct relaxation processes is inferred: a slow one, occurring in the GHz window and having an essentially structural character, and a fast one, related instead to microscopic degrees of freedom. While the former originates a neat increase of the apparent, i.e. frequency-dependent, sound velocity, the latter induces no visible dispersive effects on the acoustic propagation. The observed behavior is likely paradigmatic of all glass formers near or below the melting and it is here discussed and explained in some detail.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase stability and elastic properties of Cr-V alloys

V is the only element in the periodic table that forms a complete solid solution with Cr and thus is particularly important in alloying strategy to ductilize Cr. This study combines first-principles density functional theory calculations and experiments to investigate the phase stability and elastic properties of Cr–V binary alloys. The cluster expansion study reveals the formation of various ordered compounds at low temperatures that were not previously known. These compounds become unstable due to the configurational entropy of bcc solid solution as the temperature is increased. The elastic constants of ordered and disordered compounds are calculated at both T = 0 K and finite temperatures. The overall trends in elastic properties are in agreement with measurements using the resonant ultrasound spectroscopy method. The calculations predict that addition of V to Cr decreases both the bulk modulus and the shear modulus, and enhances the Poisson’s ratio, in agreement with experiments. Decrease in the bulk modulus is correlated to decrease in the valence electron density and increase in the lattice constant. An enhanced Poisson’s ratio for bcc Cr–V alloys (compared to pure Cr) is associated with an increased density of states at the Fermi level. Furthermore, the difference charge density in the bonding region in the (110) slip plane is highest for pure Cr and decreases gradually as V is added. The present calculation also predicts a negative Cauchy pressure for pure Cr, and it becomes positive upon alloying with V. The intrinsic ductilizing effect from V may contribute, at least partially, to the experimentally observed ductilizing phenomenon in the literature.

36 MATERIALS SCIENCE↗

Small animal PET: a review of what we have done and where we are going

Abstract Small animal research is an essential tool in studying both pharmaceutical biodistribution and disease progression over time. Furthermore, through the rapid development of in vivo imaging technology over the last few decades, small animal imaging (also referred to as preclinical imaging) has become a mainstay for all fields of biologic research and a center point for most preclinical cancer research. Preclinical imaging modalities include optical, MRI and MRS, microCT, small animal PET, ultrasound, and photoacoustic, each with their individual strengths. The strong points of small animal PET are its translatability to the clinic; its quantitative imaging capabilities; its whole-body imaging ability to dynamically trace functional/biochemical processes; its ability to provide useful images with only nano- to pico- molar concentrations of administered compounds; and its ability to study animals serially over time. This review paper gives an overview of the development and evolution of small animal PET imaging. It provides an overview of detector designs; system configurations; multimodality PET imaging systems; image reconstruction and analysis tools; and an overview of research and commercially available small animal PET systems. It concludes with a look toward developing technologies/methodologies that will further enhance the impact of small animal PET imaging on medical research in the future.

Engineering↗

Metabolic Changes Underlying Interactions Between Obesity and Non‐Alcoholic Fatty Liver Disease in South Asian Adults

Non‐alcoholic fatty liver disease (NAFLD) is often referred to as the hepatic manifestation of the metabolic syndrome, which is characterized by at least three of the following: hypertension, hyperglycemia, abdominal obesity, elevated plasma triglycerides and reduced plasma high‐density lipoproteins. While hepatic steatosis has been well studied in animal models, the relationship between body weight, hepatic steatosis and insulin resistance is not well characterized in humans. Moreover, not all human subjects with obesity develop metabolic complications. In addition, it is unclear why South Asian adults develop insulin resistance and diabetes even at lower levels of adiposity and body mass index compared to their Western counterparts. To address this question, we used a convenient sample of Sri Lankan adult females (n = 30) who underwent routine abdominal surgery at the Teaching Hospital of Peradeniya. Anthropometric data, adipose tissue specimens and fasted serum samples were collected for analyses of glucose, lipid and inflammatory markers. Histological sections of adipose tissue were obtained from omental fat (OF) and anterior abdominal wall fat (AF), and adipocyte cross‐sectional area was measured using the ImageJ software. Further, the presence of hepatic steatosis was assessed using ultrasound scanning by a radiologist. Participants with higher grade of fatty liver had a significantly higher body mass index (BMI), fasting blood glucose and aspartate aminotransferase levels. Additionally, participants with higher grade of fatty liver also had significantly higher serum levels of non‐HDL cholesterol and the pro‐inflammatory adipokine, resistin. Interestingly, there were no significant differences in serum adiponectin levels between the groups. Individuals with fatty liver also had a higher mean adipocyte area in both OF and AF, indicating a higher degree of adipocyte hypertrophy associated with fatty liver. Currently, the measurements of additional biomarkers of inflammation and insulin resistance are underway. These findings indicate distinct metabolic differences between South Asian adults with varying degrees of fatty liver, and may help in establishing effective treatment strategies for obesity‐associated NAFLD. Support or Funding Information Funded by an International Research/Development Seed grant from the Office of International Affairs and the Office of the Vice President for Research at Texas Tech university (TTU), and an International Research Seed Grant from The College of Human Sciences at TTU, and by the International Research Center, University of Peradeniya.

Albracht‐Schulte, Kembra↗