Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Supportability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Tuning the Product Distribution of Acetylene Dimerization through Bimetallic Metal–Organic Framework-Supported Nanoporous Systems

Metal-organic frameworks (MOFs) are receiving increased attention due to their well-defined structures that allow the determination of structure-property relationships. MOFs have been used as heterogeneous catalyst supports in a variety of fashions including for confinement of metal nanoparticles, which have demonstrated enhanced resistance to aggregation, a common issue in amorphous metal oxide supports. Cu and In catalysts were installed in the Zr-based MOF NU-907, being confined within the nanoporous structure. The Cu catalyst is known to, under various conditions, either selectively hydrogenate acetylene to ethylene or generate C4 products such as butenes and 1,3-butadiene, an important feedstock for rubber and adhesives. The addition of indium to the Cu catalyst is intended to serve as a promoter to produce C4 products by decreasing the surface coverage of copper while still allowing for C-C coupling. When employed for acetylene dimerization, InCu-NU-907 shows slightly decreased C4 production overall but enhanced 1,3-butadiene production compared to all other catalysts studied herein. These catalysts were thoroughly characterized by a range of techniques to confirm structural integrity and porosity and probe the nature of the interactions of indium with the Cu nanoparticle active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dianhydride-Modified Graphitic Carbon Nitride as a Support for Cobalt Single-Atom Photocatalysts

Graphitic carbon nitride (C 3 N 4 ) has been widely explored as a photoactive support for single-atom catalysts (SACs). In this paper, three different π-rich aromatic dianhydrides are employed to introduce molecular quantized trap states into the conduction band of C 3 N 4 to facilitate efficient charge-separation and to promote an enhanced photocatalytic CO 2 reduction response. These modified C 3 N 4 materials have been characterized structurally and spectroscopically for use as the support for Co-based SACs. In photocatalytic CO 2 reduction studies, the Co SAC on naphthalene dianhydride doped C 3 N 4 exhibited the highest activity and selectivity towards CO production among the Co SACs tested in this work. The observed improvement in photocatalytic CO 2 -to-CO conversion activity correlates with trends in photoinduced charge separation, as revealed by photoluminescence spectroscopy.

14 SOLAR ENERGY↗

Design and Characterization of ALD-Based Overcoats for Supported Metal Nanoparticle Catalysts

Supported metal nanoparticle (SMN) catalysts are enormously crucial for many catalytic applications. However, catalyst deactivation, caused by sintering and coke formation, is a ubiquitous problem that significantly undermines catalytic processing economics. The application of material overcoating onto supported metal nanoparticles by atomic layer deposition (ALD) offers the solution to inhibit catalyst deactivation. Herein, we discuss examples in which ALD has been used to stabilize SMN catalysts in gaseous and aqueous-phase reactions. We highlight the ALD tools and methods in coating high-surface-area catalysts. Besides, various techniques are introduced to understand better how to characterize the overcoating layer and the catalyst itself. Finally, the outlook for new techniques to characterize the ALD overcoated catalytic materials is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Activation of Lattice and Adatom Oxygen by Highly Stable Ceria-Supported Cu Single Atoms

Requiring catalysts to be both active yet stable over long periods of time under variable reaction conditions including high and low temperatures is a daunting challenge due to the almost mutual exclusivity of these constraints. Using CO oxidation as a probe reaction, in this work we demonstrate that thermally stable single atom copper catalysts prepared by high temperature synthesis (atom trapping) on ceria can achieve this feat by allowing modulation of the Cu charge state through facile charge transfer between active site and support. This provides the catalysts with an ability to activate either lattice or adatom oxygen atoms, accessing additional reaction channels depending on the reaction conditions. Such adaptability allows dynamic response of catalysts enabling them to remain active under variable reaction conditions. The inherent stability of the catalyst arises from the enhanced strength of the Cu-O interactions from high temperature synthesis that exist even when Cu oxidation state varies, which retards sintering and deactivation. As we show here, one can circumvent the dilemma of designing catalysts that are simultaneously active and stable by matching the redox properties of the active site and support and establishing an environmental adaptability around the active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supported Electrophilic Organoruthenium Catalyst for the Hydrosilylation of Olefins

A series of supported electrophilic organoruthenium complexes has been synthesized via surface organometallic chemistry (SOMC) techniques and applied to the selective hydrosilylation of olefins. The air-sensitive 16e - complex Cp*RuMes(PCy 3 ) (1) (Cp* = pentamethylcyclopentadienyl, Mes = mesityl) was synthesized by the treatment of Cp*RuCl(PCy 3 ) with mesityl Grignard MesMgBr. This species was chemisorbed onto sulfated zirconia SO 4 /ZrO 2 , but the resulting material was inactive toward cyclohexene hydrosilylation with phenylsilane. Instead, Cp*RuMes(PCy 3 ) was treated with phenylsilane (PhSiH 3 ) to provide a ruthenium disilyl hydride complex Cp*RuH(SiH 2 Ph) 2 (PCy 3 ) (3), which was fully characterized by NMR spectroscopy and single-crystal X-ray diffraction. Grafting this species onto SO 4 /ZrO 2 resulted in the formation of phenylsilane along with the surface electrophilic species [Cp*RuH(R)(X-SiHPh)(PCy 3 )] (R = H, O 3 S-O or O 3 Zr-O; 4a, 4b, X = O 3 S-O, and O 3 Zr-O, respectively) as the major species. Material 4 was characterized via a combination of spectroscopic techniques including dynamic nuclear polarization (DNP)-enhanced solid-state NMR spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray absorption spectroscopy (XAS), and density function theory (DFT) calculations. Further, capping the remaining acid sites on 4 with Me 3 Si-SiMe 3 provides 5, which significantly reduces side reactions, such as olefin isomerization and silane redistribution. Catalyst 5 is a highly robust and selective hydrosilylation catalyst and can be recycled up to 5 times without significant diminishment of activity. Exclusive anti-Markovnikov regiochemistry, cis-addition selectivity, and the inactivity of secondary and tertiary silanes provide support for the proposed Glaser-Tilley mechanism involving cationic ruthenium silylene species analogous to homogeneous systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward Rational Design of Catalysts Supported on a Topological Insulator Substrate

Exotic and robust metallic surface states of topological insulators (TIs) have been expected to provide a promising platform for novel surface chemistry and catalysis. However, it is still not fully known how TIs affect the activity of catalysts. In this work, we study the effects of topological surface states (TSSs) on the activity of transition metal clusters (Au, Ag, Cu, Pt, and Pd), which are supported on a TI Bi2Se3 substrate. It was found the adsorption energy of oxygen on the supported catalysts can be always enhanced due to the TSSs. However, it does not necessarily mean an increase of the activity in catalytic oxidation reaction. Rather, the enhanced adsorption behavior in the presence of TSSs exhibits dual effects, determined by the intrinsic reactivity of these catalysts with oxygen. For the Au case, the activity of catalytic oxidation can be improved because the TSSs can enhance the dissociation rate of dioxygen. In contrast, a negative effect is found for the Pt and Pd clusters since the TSSs will suppress the desorption process of reaction products. We also found that the effect of TSSs on the activity of hydrogen evolution reaction (HER) is quite similar (i.e., the metals with original weak reactivity can gain a positive effect from TSSs). The present work can pave a way for more rational design and selection of catalysts when using TIs as substrates.

Xiao, Jianping↗

Preventing Loss of Selectivity during the Oxidative Dehydrogenation of Propane over Supported Vanadium Catalysts

Supported vanadium materials are promising catalysts for the oxidative dehydrogenation of propane to propylene (ODHP), but a lack of mechanistic understanding limits the rational design of catalysts with improved propylene selectivity. Adding Ta to V/SiO 2 increases the propylene selectivity, as well as the activity, leading to superior performance compared to state-of-the-art boron-based systems. In this contribution, we utilize this surprising promotional effect of Ta to elucidate key elements of the mechanistic cycle. Through a combination of characterization techniques, computational modeling, and kinetic experiments, we show that the catalytic cycle over V/SiO 2 likely involves the formation of an isopropyl alcohol intermediate, the fate of which is in kinetic competition between subsequent dehydration to propylene or further oxidation. Furthermore, we show that the relatively facile propylene overoxidation observed for these materials occurs via the epoxidation of propylene by a proposed peroxovanadium intermediate, rather than the abstraction of propylene’s allylic C–H bond as previously assumed. Using these key mechanistic features, we rationalize the enhanced selectivity and activity of Ta promotion. In conclusion, our mechanistic framework offers avenues for future catalyst development to improve supported vanadium materials for ODHP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Propane Dehydrogenation over Alumina-Supported Iron/Phosphorus Catalysts: Structural Evolution of Iron Species Leading to High Activity and Propylene Selectivity

A series of alumina-supported Fe-based catalysts is prepared via a dry impregnation method in the presence of a phosphorus source (phosphate salt) and then used for the catalytic dehydrogenation of propane. Specifically, supported catalysts with Fe:P molar ratios of 1:1, 2:1, and 3:1 are prepared and their chemical composition, textural properties, and redox properties are characterized with an array of techniques. In the nonoxidative dehydrogenation (PDH) of propane at 600 °C and atmospheric pressure, the most active catalyst (Fe:P ratio of 3:1) exhibits 15% propane conversion and >80% C 3 H 6 selectivity. The calculated activity is 9.9 mmol/(h g Fe ) (mass basis) or 13 μmol/(h m 2 ) (surface area basis), with a corresponding TOF of 19 h –1 . During the initial stages of reaction under PDH conditions, the precatalyst is reduced and Fe(0) species are generated, eventually giving way to iron carbide species. During this induction period, significant carbon is incorporated into the catalyst and propylene selectivity is low. Only after the iron carbide phase appears do the reactivity and selectivity achieve steady-state conditions with high propylene selectivity and good activity. The addition of the phosphorus source in the precatalyst is found to be important in obtaining a catalyst with superior performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water-Gas Shift Activity of Atomically Dispersed Cationic Platinum versus Metallic Platinum Clusters on Titania Supports

Atomically dispersed supported metal catalysts offer unique opportunities for designing highly selective catalysts and maximizing the utility of precious metals that have potential applications in a wide variety of industrial chemical reactions. While substantial advances in understanding the origin of the activity of such highly dispersed metal catalysts have been made for a few chemical reactions, the reaction mechanisms and the nature of the active site—small metal clusters versus single atoms—are still highly debated. Using a combination of density functional theory and microkinetic modeling, we confirm that a positively charged single Pt atom on TiO 2 (110) can exhibit a very high low-temperature activity for the water-gas shift reaction (TOF > 0.1 s –1 at 473 K). A comparison of these findings with our work on TiO 2 -supported Pt cluster models provides clear evidence that different active sites are responsible for the experimentally observed activity at low and high temperatures. Lastly, we explain why contradictory experimental conclusions have been reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Propane Dehydrogenation Catalyzed by Supported Group IV (Ti, Zr, Hf) Organometallics on Silicon Nitride

Mesoporous silicon nitride (Si 3 N 4 ) enables access to chemisorbed group IV organometallics catalysts active for propane dehydrogenation (PDH) compared to the organometallic analogues on mesoporous silica under the same reaction conditions. The series of Si 3 N 4 -supported materials are active catalysts, (Zr > Hf > Ti k f = 290, 232, and 162 mol mol Metal -1 h -1 at 450 °C with 2% C 3 H 8 in Ar, respectively) with selectivity above 95%, demonstrating additional examples of Ti and Hf systems for PDH. However, the underlying mechanism of the improved performance relative to oxide supported homologues is not well-understood. Characterization of thermally treated samples (DRIFTS, XAS and SSNMR) and computational modeling of this catalyst series was utilized to differentiate between potential amido - (C-H activation along the M-N bond) and imido - (C-H activation along the M=N bond) mechanisms. Due to remaining mechanistic ambiguity, a Ga analogue was synthesized and evaluated for PDH activity as an indirect probe to experimentally differentiate pathways. An inversion of the oxide/nitride performance trend is observed for the Ga congener which does not form a Ga=N bond, most consistent with different mechanisms dictating the performance of the group IV/Si 3 N 4 catalysts vs Ga/Si 3 N 4 .

heterolytic cleavage↗

Toward the Design of a Hierarchical Perovskite Support: Ultra-Sintering-Resistant Gold Nanocatalysts for CO Oxidation

We report that an ultrastable Au nanocatalyst based on a heterostructured perovskite support with high surface area and uniform LaFeO 3 nanocoatings was successfully synthesized and tested for CO oxidation. Strikingly, small Au nanoparticles (4–6 nm) are obtained after calcination in air at 700 °C and under reaction conditions. The designed Au catalyst not only possessed extreme sintering resistance but also showed high catalytic activity and stability because of the strong interfacial interaction between Au and the heterostructured perovskite support.

36 MATERIALS SCIENCE↗

A Strong Support Effect in Selective Propane Dehydrogenation Catalyzed by Ga( i -Bu) 3 Grafted onto γ-Alumina and Silica

The reactions of Ga( i -Bu) 3 ( i -Bu = CH 2 CH(CH 3 ) 2 ) with the dehydrated and partially dehydroxylated surfaces of alumina (Al 2 O 3–500 ) and silica (SiO 2–700 ) were studied by IR, high field solid-state NMR and EXAFS spectroscopies, as well as elemental analysis. Grafting onto Al 2 O 3–500 occurs selectively by protonolysis at individual surface hydroxyl groups, resulting in the formation of mononuclear [(≡AlO)Ga( i -Bu) 2 L] (L = surface oxygen) sites as the major surface organometallic entities. Conversely, grafting on silica affords dinuclear species [(≡SiO) 2 Ga 2 ( i -Bu) 3 ] by a combination of protonolysis and isobutyl group transfer to Si. Further evidence for the difference in nuclearity was obtained by analysis of the WT-EXAFS. The mononuclear alumina-supported Ga sites show much higher activity in propane dehydrogenation than their dinuclear silica-supported counterparts. The propane dehydrogenation reaction may require the presence of Al–O–Ga bonds to promote heterolytic C–H bond activation. In conclusion, comparisons with benchmark catalysts and related systems show that the effect of the catalyst diluent is significant under the reaction conditions and must be carefully assessed in order to attribute reactivity correctly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Perspective on the Selective Catalytic Reduction (SCR) of NO with NH 3 by Supported V 2 O 5 –WO 3 /TiO 2 Catalysts

We report the selective catalytic reduction (SCR) of NO x with NH 3 to harmless N 2 and H 2 O plays a crucial role in reducing highly undesirable NO x acid gas emissions from large utility boilers, industrial boilers, municipal waste plants, and incinerators. The supported V 2 O 5 –WO 3 /TiO 2 catalysts have become the most widely used industrial catalysts for these SCR applications since introduction of this technology in the early 1970s. Lastly, this Perspective examines the current fundamental understanding and recent advances of the supported V 2 O 5 –WO 3 /TiO 2 catalyst system: (i) catalyst synthesis, (ii) molecular structures of titaniasupported vanadium and tungsten oxide species, (iii) surface acidity, (iv) catalytic active sites, (v) surface reaction intermediates, (vi) reaction mechanism, (vii) ratedetermining- step, and (viii) reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-Supported Hydrous Iridium–Nickel Oxide Two-Dimensional Nanoframes for High Activity Oxygen Evolution Electrocatalysts

Oxygen evolution reaction (OER) electrocatalysts with high activity, high stability, and low costs are needed for proton-exchange membrane (PEM) electrolyzers. Based on the high cost and limited supply of iridium, approaches that result in iridium-based OER catalysts with increased catalytic activity are of significant interest. Here, we report a carbon-free, self-supported hydrous iridium-nickel oxide two-dimensional nanoframe structure synthesized by thermal treatment of iridium-decorated nickel oxide nanosheets under reducing conditions and subsequent chemical leaching in acid. The catalyst nanoarchitecture contains an interconnected network of metallic iridium-nickel alloy domains with hydrous iridium oxide and nickel oxide located in the surface region. The electrochemical oxidation step maintains the three-dimensional nanoarchitecture and results in a thin (~5 A) oxide/hydroxide surface layer. The temperature used for thermal reduction was found to strongly affect the catalyst surface structure and OER activity. Utilizing a lower thermal reduction temperature of 200 degrees C was determined to provide a higher relative surface concentration of hydroxides and nickel oxide and result in higher OER activities compared with materials treated at 300 degrees C. The 200 degrees C-treated hydrous iridium-nickel oxide electrocatalyst showed 15 times higher initial OER mass activity than commercial IrO 2 , and the activity remained 10 times higher than IrO 2 after accelerated durability testing. Density functional theory (DFT) calculations and analysis of the experimental Tafel slopes support that the second electron transfer step is the rate-limiting step for the reaction. The DFT calculations demonstrate that Ni substitution on the IrO 2 surface lowers the activation energy for adsorbed intermediates of the second electron transfer step of the OER reaction. This work establishes that noble metal-decorated metal oxide nanosheets can be transformed into high surface area, carbon-free electrocatalyst nanostructures with high catalytic activities and molecular accessibility and reveals the importance of using controlled thermal reduction temperatures to alter the surface structure and OER activity.

36 MATERIALS SCIENCE↗

Operando Structure Determination of Cu and Zn on Supported MgO/SiO 2 Catalysts during Ethanol Conversion to 1,3-Butadiene

Electronic structure and reactivity of Cu- and Zn-promoted wet kneaded MgO/SiO 2 catalysts was interrogated during ethanol reaction to 1,3-BD. A multimodal nature of characterization, including in situ or operando X-ray, electron, light spectroscopies and steady state reactivity measurements demonstrated critical new information on the temporal evolution of the catalyst active sites including key measurements performed operando using synchrotron source (EXAFS and XANES). In situ DRIFT spectroscopy allowed to decouple the aldol condensation and dehydrogenation reactive steps due to the promotion with enhanced ability to carry out aldol condensation, as correlated with the steady state reactivity experiments . In situ UV-Vis spectroscopy presented a complex picture of the adsorbates with π- π* electronic transitions due to the allylic cations, cyclic or aromatic species while also suggesting oligomeric CuO species were formed. Operando X-ray measurements combined with ab initio multiple scattering modelling performed as a function of temperature identified a new transient intermediate assigned to a 4-fold coordinate Cu species that was key leading to increase in Cu-Cu pair number. For the first time, two types of Zn pairs, namely Zn-O and Zn-Mg, were identified during X-ray analysis under operating conditions. With Zn nearly 6-coordinated when in the vicinity of Mg while Zn-O species coordinated to nearly 4 nearest neighbors. The data suggest that such supported catalyst deactivation might proceed not only via carbon coking mechanism but also through the dispersed Cu site diffusion and growth due to the nearest neighbor oxygen atoms loss. The results presented suggest intermediates for segregation/deactivation mechanisms for a broader set of supported Cu and Zn catalysts used for alcohol upgrading catalytic reactions.

1,3-butadiene↗

Chemoselective Hydrodeoxygenation of Carboxylic Acids to Hydrocarbons over Nitrogen-doped Carbon-Alumina Hybrid-Supported Iron Catalysts

Here, the establishment of catalyst systems for chemoselective hydrodeoxygenation (HDO) of carboxylic acids to hydrocarbons, such as the HDO of long-chain fatty acids to alkanes, is important for biomass-to-biofuel conversion. As the most abundant and probably the cheapest transition-metal on the earth, iron is a promising non-noble alternative to precious metals for large-scale conversion of biomass. However, it usually suffers from unsatisfactory activity. In this work, nitrogen-doped carbon-alumina hybrid-supported iron (Fe-N-C@Al 2 O 3 ) catalyst is established for chemoselective HDO of carboxylic acids to hydrocarbons. By using stearic acid HDO as the model reaction, n-octadecane and n-hepadecane are produced with yields of 91.9% and 6.0%, respectively. Triglycerides can also be converted into liquid alkanes with total molar yield of >92%. In addition, the iron catalyst can chemoselectively catalyze the HDO of carboxylic acid group in the presence of other functional groups such as an aromatic ring. This chemoselectivity is rarely seen before because the aromatic ring is usually easier to be hydrogenated than carrying out HDO of carboxylic acid group. The characterization results showed that both the formation of nitrogen-doped carbon-alumina hybrid and the iron-loading are important for the Lewis basicity of these catalysts, in order to adsorb the acid substrates. The addition of melamine as nitrogen precursor during pyrolysis eliminates undesired reactions between iron precursor and alumina support to form inactive hercynite phase, leading to the formation of Fe 3 C active phase for the hydrogenation of –COOH to –CH 2 OH and the hybrid of N-C and alumina for the HDO of -CH 2 OH to –CH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Heterolytic H2 Cleavage and Water-Assisted Hydrogen Spillover on Fe3O4(001)-Supported Single Palladium Atoms

The high specific activity, novel properties, and cost effectiveness of single-atom catalysts (SAC) hold great promise and allow for new chemistry in numerous reactions. Here, we focus on fundamental understanding of the critical step in hydrogenation reactions, H2 activation, on a model SAC catalyst comprised of single Pd atoms on reconstructed Fe3O4(001). Using a combination of scanning tunneling microscopy and density functional theory we demonstrate that H2 dissociates heterolytically, ultimately yielding hydroxyls on, and excess charge in, the Fe3O4 support. The hydrogenation can be carried out to high coverages and ultimately leads to lifting of the Fe3O4 reconstruction and Pd reduction and destabilization. Water plays an important role in reduction of the hydrogen diffusion barrier, thereby facilitating redistribution of hydroxyls away from Pd. Our study demonstrates a distinct H2 activation mechanism on single Pd atoms and shows the importance of a reducible support that can facilitate charge transport away from the active site.

Doudin, Nassar M.↗

Local Structure and Electronic State of Atomically Dispersed Pt Supported on Nanosized CeO 2

Single atom catalysts (SACs) have shown high activity and selectivity in a growing number of chemical reactions. Many efforts aimed at unveiling the structure–property relationships underpinning these activities and developing synthesis methods for obtaining SACs with the desired structures are hindered by the paucity of experimental methods capable of probing the attributes of local structure, electronic properties, and interaction with support—features that comprise key descriptors of their activity. Here in this work, we describe a combination of experimental and theoretical approaches that include photon and electron spectroscopy, scattering, and imaging methods, linked by density functional theory calculations, for providing detailed and comprehensive information on the atomic structure and electronic properties of SACs. This characterization toolbox is demonstrated here using a model single atom Pt/CeO 2 catalyst prepared via a sol–gel-based synthesis method. Isolated Pt atoms together with extra oxygen atoms passivate the (100) surface of nanosized ceria. A detailed picture of the local structure of Pt nearest environment emerges from this work involving the bonding of isolated Pt 2+ ions at the hollow sites of perturbed (100) surface planes of the CeO 2 support, as well as a substantial (and heretofore unrecognized) strain within the CeO 2 lattice in the immediate vicinity of the Pt centers. The detailed information on structural attributes provided by our approach is the key for understanding and improving the properties of SACs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗