Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Superconducting materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Superconductivity above 200 K discovered in superhydrides of calcium

Searching for superconductivity with T c near room temperature is of great interest both for fundamental science & many potential applications. Here we report the experimental discovery of superconductivity with maximum critical temperature (T c ) above 210 K in calcium superhydrides, the new alkali earth hydrides experimentally showing superconductivity above 200 K in addition to sulfur hydride & rare-earth hydride system. The materials are synthesized at the synergetic conditions of 160~190 GPa and ~2000 K using diamond anvil cell combined with in-situ laser heating technique. The superconductivity was studied through in-situ high pressure electric conductance measurements in an applied magnetic field for the sample quenched from high temperature while maintained at high pressures. The upper critical field Hc(0) was estimated to be ~268 T while the GL coherent length is ~11 Å. The in-situ synchrotron X-ray diffraction measurements suggest that the synthesized calcium hydrides are primarily composed of CaH 6 while there may also exist other calcium hydrides with different hydrogen contents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Developing and Running Quantum Algorithms for Chemistry and Materials (QAChMat) (Final Technical Report)

The goal of the project is to design, develop, and execute new computational methods on practical quantum computing platforms to simulate hard problems in chemical and materials sciences. We exploited the two leading quantum computing platforms of trapped atomic ion and superconducting qubits, established in laboratories at Duke University and the University of Maryland, to discover new simulation and computational methods for the study of quantum chemistry and materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Topological Nernst and topological thermal Hall effect in rare-earth kagome ScMn 6 Sn 6

Thermal and thermoelectric measurements are known as powerful tools to uncover the physical properties of quantum materials due to their sensitivity towards the scattering and chirality of heat carriers. We use these techniques to confirm the presence of momentum and real-space topology in ScMn 6 Sn 6 . There is an unconventional dramatic increase in the Seebeck coefficient on entering the transverse conical spiral (TCS) state below $T$ = 200 K, suggesting an unusual scattering of heat carriers. In addition, the observed anomalous thermal Hall effect and the anomalous Nernst effect indicate nonzero Berry curvature in k space. Furthermore, we identify a significant topological contribution to the thermal Hall and Nernst signals in the TCS phase revealing the impacts of real-space Berry curvature. We discuss the presence of the topological thermal Hall effect and topological Nernst effect in the diverse HfFe 6 Ge 6 family. In conclusion, this study illustrates the importance of transverse thermal and thermoelectric measurements to investigate the origin of topological transport in the noncoplanar magnetic phases in this family of kagome metals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Layer-by-layer disentanglement of Bloch states

Layer-by-layer material engineering has produced interesting quantum phenomena such as interfacial superconductivity and the quantum anomalous Hall effect. However, probing electronic states layer-by-layer remains challenging. This is exemplified by the difficulty in understanding the layer origins of topological electronic states in magnetic topological insulators. In this work, we report a layer-encoded frequency-domain photoemission experiment on the magnetic topological insulator (MnBi 2 Te 4 )(Bi 2 Te 3 ) that characterizes the origins of its electronic states. Infrared laser excitations launch coherent lattice vibrations with the layer index encoded by the vibration frequency. Photoemission spectroscopy then tracks the electron dynamics, where the layer information is carried in the frequency domain. This layer-frequency correspondence reveals wavefunction relocation of the topological surface state from the top magnetic layer into the buried second layer, reconciling the controversy over the vanishing broken-symmetry energy gap in (MnBi 2 Te 4 )(Bi 2 Te 3 ) and its related compounds. The layer-frequency correspondence can be harnessed to disentangle electronic states layer-by-layer in a broad class of van der Waals superlattices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phonon mixing in the charge density wave state of ScV6Sn6

Abstract Kagomé metals are widely recognized, versatile platforms for exploring topological properties, unconventional electronic correlations, magnetic frustration, and superconductivity. In the R V 6 Sn 6 family of materials ( R = Sc, Y, Lu), ScV 6 Sn 6 hosts an unusual charge density wave ground state as well as structural similarities with the A V 3 Sb 5 system ( A = K, Cs, Rb). In this work, we combine Raman scattering spectroscopy with first-principles lattice dynamics calculations to reveal phonon mixing processes in the charge density wave state of ScV 6 Sn 6 . In the low temperature phase, we find at least four new peaks in the vicinity of the V-containing totally symmetric mode near 240 cm −1 suggesting that the density wave acts to mix modes of P 6/ m m m and $$R\bar{3}m$$ R 3 ¯ m symmetry - a result that we quantify by projecting phonons of the high symmetry state onto those of the lower symmetry structure. We also test the stability of the short-range ordered density wave state under compression and propose that both physical and chemical pressure quench the effect. We discuss these findings in terms of symmetry and the structure-property trends that can be unraveled in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Structure of amorphous materials in the NASICON system Na 1+x Ti 2 Si x P 3−x O 12

Abstract The structure of glasses in the sodium (Na) super-ionic conductor (NASICON) system Na 1 + x Ti 2 Si x P 3 − x O 12 with x = 0.8 and x = 1.0 was explored by combining neutron and high-energy x-ray diffraction with 29 Si, 31 P and 23 Na solid-state nuclear magnetic resonance (NMR) spectroscopy. The 29 Si magic angle spinning (MAS) NMR spectra reveal that the silica component remains fully polymerized in the form of Si 4 units, i.e. the silicon atoms are bound to four bridging oxygen atoms. The 31 P{ 23 Na} rotational echo adiabatic passage double resonance (REAPDOR) NMR data suggest that the 31 P MAS NMR line shape originates from four-coordinated P n units, where n = 1, 2 or 3 is the number of bridging oxygen atoms per phosphorus atom. These sites differ in their 31 P- 23 Na dipolar coupling strengths. The results support an intermediate range order scenario of a phosphosilicate mixed network-former glass in which the phosphate groups selectively attract the Na + modifier ions. Titanium takes a sub-octahedral coordination environment with a mean Ti–O coordination number of 5.17(4) for x = 0.8 and 4.86(4) for x = 1.0. A mismatch between the P–O and Si–O bond lengths of 8% is likely to inhibit the incorporation of silicon into the phosphorus sites of the NASICON crystal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Detection of a pair density wave state in UTe2

Abstract Spin-triplet topological superconductors should exhibit many unprecedented electronic properties, including fractionalized electronic states relevant to quantum information processing. Although UTe 2 may embody such bulk topological superconductivity 1–11 , its superconductive order parameter Δ( k ) remains unknown 12 . Many diverse forms for Δ( k ) are physically possible 12 in such heavy fermion materials 13 . Moreover, intertwined 14,15 density waves of spin (SDW), charge (CDW) and pair (PDW) may interpose, with the latter exhibiting spatially modulating 14,15 superconductive order parameter Δ( r ), electron-pair density 16–19 and pairing energy gap 17,20–23 . Hence, the newly discovered CDW state 24 in UTe 2 motivates the prospect that a PDW state may exist in this material 24,25 . To search for it, we visualize the pairing energy gap with μeV-scale energy resolution using superconductive scanning tunnelling microscopy (STM) tips 26–31 . We detect three PDWs, each with peak-to-peak gap modulations of around 10 μeV and at incommensurate wavevectors P i =1,2,3 that are indistinguishable from the wavevectors Q i =1,2,3 of the prevenient 24 CDW. Concurrent visualization of the UTe 2 superconductive PDWs and the non-superconductive CDWs shows that every P i : Q i pair exhibits a relative spatial phase δϕ ≈ π. From these observations, and given UTe 2 as a spin-triplet superconductor 12 , this PDW state should be a spin-triplet PDW 24,25 . Although such states do exist 32 in superfluid 3 He, for superconductors, they are unprecedented.

Science & Technology - Other Topics↗
DOE OSTI2021

Temperature effects in spin-dependent Hall currents in an ideal skyrmion gas

The quest of novel reliable and fast performing logic and memory elements in classical and quantum computing requires discoveries of new effects in novel quantum materials. Skyrmions are such magnetic textures where electron scattering can essentially change the shape and location of the skyrmion, which can be used as a memory element being more efficient than domain walls as memory device in classical computing. Because the skyrmion motion is sensitive even to very small currents, we study electron scattering by skyrmions in an ideal skyrmion gas in ferromagnetic environment. In such systems, the direct and Hall currents become spin-dependent. For applications it is important to consider a Hall effect in the whole range of temperatures under the assumption of the skyrmion existence. In this study we find the nonmonotonic temperature dependence of the direct spin-up conductivity, i. e., the conductivity for the current directed along the applied electric field due to the electrons with the spin parallel to the ferromagnetic moment. Such a behavior contradicts the traditional understanding where the temperature only increases the value of the conductivity. The spin-down Hall conductivity is found to be even more dramatic exhibiting the conductivity sign change (i.e., the change in the current direction) with temperature for small skyrmion sizes. The found effects strongly depend on Fermi energy. The most pronounced dependencies take place if the Fermi energy is slightly below and above the bottom of the upper (spin-down) energy band of an ideal 2D electron gas. In addition, we also find that the direct and Hall resistivities, ρ xx and ρ xy , are independent of the exchange integral J for 2J > ε F .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2012

Fabrication and Performance of Large Format Transition Edge Sensor Microcalorimeter Arrays

We have produced a variety of superconducting transition edge sensor array designs for microcalorimetric detection of x-rays. Designs include kilopixel scale arrays of relatively small sensors (~75 micron pitch) atop a thick metal heatsinking layer as well as arrays of membrane-isolated devices on 250 micron pitch and smaller arrays of devices up to 600 micron pitch. We discuss the fabrication techniques used for each type of array focusing on unique aspects where processes vary to achieve the particular designs and required device parameters. For example, we evaluate various material combinations in the production of the thick metal heatsinking, including superconducting and normal metal adhesion layers. We also evaluate the impact of added heatsinking on the membrane isolated devices as it relates to basic device parameters. Arrays can be characterized with a time division SQUID multiplexer such that greater than 10 devices from an array can be measured in the same cooldown. Device parameters can be measured simultaneously so that environmental events such as thermal drifts or changes in magnetic fields can be controlled. For some designs, we will evaluate the uniformity of parameters impacting the intrinsic performance of the microcalorimeters under bias in these arrays and assess the level of thermal crosstalk.

Chervenak, James A.↗
DOE OSTI2020

Spectroscopic fingerprint of charge order melting driven by quantum fluctuations in a cuprate

Copper oxide high-T C superconductors possess a number of exotic orders that coexist with or are proximal to superconductivity. Quantum fluctuations associated with these orders may account for the unusual characteristics of the normal state, and possibly affect the superconductivity. Yet, spectroscopic evidence for such quantum fluctuations remains elusive. Here in this paper, we use resonant inelastic X-ray scattering to reveal spectroscopic evidence of fluctuations associated with a charge order in nearly optimally doped Bi 2 Sr 2 CaCu 2 O 8+δ . In the superconducting state, while the quasielastic charge order signal decreases with temperature, the interplay between charge order fluctuations and bond-stretching phonons in the form of a Fano-like interference increases, an observation that is incompatible with expectations for competing orders. Invoking general principles, we argue that this behaviour reflects the properties of a dissipative system near an order–disorder quantum critical point, where the dissipation varies with the opening of the pseudogap and superconducting gap at low temperatures, leading to the proliferation of quantum critical fluctuations, which melt charge order.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Preserving the Josephson Coupling of Twisted Cuprate Junctions via Tailored Silicon Nitride Circuits Boards

Controlled fabrication of twisted van der Waals heterostructures is essential to unlock the full potential of moiré materials. However, achieving reproducibility remains a major challenge, particularly for air-sensitive materials such as Bi 2 Sr 2 CaCu 2 O 8 + δ (BSCCO), where it is crucial to preserve the intrinsic and delicate superconducting properties of the interface throughout the entire fabrication process. Here, a dry, inert and cryogenic assembly method is presented that combines silicon nitride nanomembranes (NMBs) with pre-patterned electrodes and the cryogenic stacking technique (CST) to fabricate high-quality twisted BSCCO Josephson junctions (JJs). This protocol prevents thermal and chemical degradation during both interface formation and electrical contact integration. It is also found that asymmetric membrane designs, such as a double cantilever, effectively suppress vibration-induced disorder due to wire bonding, resulting in sharp and hysteretic current–voltage characteristics. The junctions exhibit a twist-angle-dependent Josephson coupling with magnitudes comparable to the highest-performing devices reported to date, but achieved through a straightforward and versatile contact method, offering a scalable and adaptable platform for future applications. These findings highlight the importance of both interface and contact engineering in addressing reproducibility in superconducting van der Waals heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Unveiling in-gap states and Majorana zero modes in superconductor-topological insulator bilayer model

Interfaces between topological insulators and superconductors (SCs) are promising platforms for realizing Majorana zero modes (MZMs) via the superconducting proximity effect. We introduce a bilayer model consisting of the surface states of a three-dimensional topological insulator (3DTI) coupled to an 𝑠-wave superconductor and systematically study the role of interlayer tunneling strength (𝑡⊥) motivated by the recent growth of the Fe⁡(Te,Se)/Bi 2 ⁢Te 3 heterostructure. We find that increasing 𝑡⊥ shifts the proximity-induced (PrI) gap minimum away from the Γ point, giving rise to momentum-selective interference patterns that manifest as spatial oscillations in the in-gap states. We introduce an antidot with a magnetic vortex in the model and investigate the resulting in-gap states, including MZMs and Caroli–de Gennes–Matricon (CdGM) modes. With increasing hybridization strength, the energy separation between MZMs and CdGM states increases, enhancing the isolation of MZMs. Importantly, in the strong hybridization limit, the leading CdGM separation remains large in spite of the decrease in the PrI gap. Spin- and spatially resolved wavefunction analysis reveals angular momentum asymmetries absent in conventional 𝑠-wave systems. A direct comparison with a standalone 𝑠-wave superconductor confirms the emergence of distinct 𝑝-wave-like features in the bilayer geometry. Our results provide experimentally relevant predictions for tuning the stability of MZMs and their differentiation from the CdGM modes in SC-3DTI heterostructures and offer a theoretical framework for probing unconventional superconductivity in engineered topological systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Colossal Nernst power factor in topological semimetal NbSb 2

Today solid-state cooling technologies below liquid nitrogen boiling temperature (77 K), crucial to quantum information technology and probing quantum state of matter, are greatly limited due to the lack of good thermoelectric and/or thermomagnetic materials. Here, we report the discovery of colossal Nernst power factor of 3800 × 10 -4 W m -1 K -2 under 5 T at 25 K and high Nernst figure-of-merit of 71 × 10 -4 K -1 under 5 T at 20 K in topological semimetal NbSb 2 single crystals. The observed high thermomagnetic performance is attributed to large Nernst thermopower and longitudinal electrical conductivity, and relatively low transverse thermal conductivity. The large and unsaturated Nernst thermopower is the result of the combination of highly desirable electronic structures of NbSb 2 having compensated high mobility electrons and holes near Fermi level and strong phonon-drag effect. This discovery opens an avenue for exploring material option for the solid-state heat pumping below liquid nitrogen temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Engineering of niobium surfaces through accelerated neutral atom beam technology for quantum applications

A major roadblock to scalable quantum computing is phase decoherence and energy relaxation caused by qubits interacting with defect-related two-level systems (TLSs). Native oxides present on the surfaces of superconducting metals used in quantum devices are acknowledged to be a source of TLS that decrease qubit coherence times. Reducing microwave loss by “surface engineering” (i.e., replacing the uncontrolled native oxide of superconducting metals with a thin, stable surface with predictable characteristics) can be a key enabler for pushing performance forward with devices of higher intrinsic quality factor. In this work, we present a novel approach to replace the native oxide of niobium (typically formed in an uncontrolled fashion when its pristine surface is exposed to air) with an engineered oxide, using a room-temperature process that leverages accelerated neutral atom beam (ANAB) technology at 300 mm wafer scale. This ANAB is composed of a mixture of argon and oxygen, with tunable energy per atom, which is rastered across the wafer surface. The ANAB-engineered Nb-oxide thickness was found to vary from 2 to 6 nm depending on ANAB process parameters. The modeling of variable-energy x-ray photoelectron spectroscopy data confirms the thickness and compositional control of Nb surface oxide by the ANAB process. Furthermore, these results correlate well with those from transmission electron microscopy and x-ray reflectometry. Since ANAB is broadly applicable to material surfaces, the present study indicates its promise for modification of the surfaces of superconducting quantum circuits to achieve longer coherence times.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Diffused morphotropic phase boundary in relaxor-PbTiO 3 crystals: High piezoelectricity with improved thermal stability

Solid solution ferroelectrics are the most widely used piezoelectric material for numerous electromechanical applications, including sensors, actuators, and transducers. A milestone in ferroelectric research is the discovery of the morphotropic phase boundary that was first reported in Pb(Zr x Ti 1–x )O 3 , which has been extensively solicited to improve the performance of various solid solution ferroelectrics, including those having the highest piezoelectricity known today. However, due to the inherent correlation between phase transition and thermodynamic imbalance, the efforts of building the phase boundary encounter the challenge that high performance materials are generally accompanied by property instability. In this paper, we report a comprehensive study on the crystalline symmetry and polar nano-regions in relaxor-PbTiO 3 crystals by synchrotron measurements and property characterizations. In contrast to the common belief that the morphotropic phase boundary is a narrow composition region, the morphotropic phase boundary in ternary Pb(In 1/2 Nb 1/2 )O 3 -Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 is demonstrated as an extensive region covering at least 9% of the PbTiO 3 content. Such a diffused morphotropic phase boundary is associated with the intensive interaction of polar nano-regions, leading to high piezoelectricity (>1500 pC/N) with greatly improved thermal stability, where the piezoelectric variation is ~90% over the temperature range of 273–373 K, which is about a factor of 3 lower compared to its binary counterpart Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 . This work sheds light on the fundamental understanding of nanoscale inhomogeneity and macroscopic symmetry in relaxor-PbTiO 3 , and successfully interlinks the structure and properties in complex solid solutions. The existence of a diffused morphotropic phase boundary is also expected to benefit other ferroic systems beyond ferroelectrics, such as ferromagnetic and multiferroic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Incommensurate magnetic orders and topological Hall effect in the square-net centrosymmetric EuGa 2 Al 2 system

Neutron diffraction on the centrosymmetric square-net magnet EuGa 2 Al 2 reveals multiple incommensurate magnetic states (AFM1, 2, 3) in zero field. In applied field, a new magnetic phase (A) is identified from magnetization and transport measurements, bounded by two of the μ 0 H=0 incommensurate magnetic phases (AFM1, helical, and AFM3, cycloidal) with different moment orientations. Moreover, magnetotransport measurements indicate the presence of a topological Hall effect, with maximum values centered in the A phase. Together, these results render EuGa 2 Al 2 a material with noncoplanar or topological spin texture in applied field. X-ray diffraction reveals an out-of-plane (OOP) charge density wave (CDW) below T CDW ~50 K while the magnetic propagation vector lies in plane below T N =19.5 K. Together these data point to a new route to realizing in-plane noncollinear spin textures through an OOP CDW. In turn, these noncollinear spin textures may be unstable against the formation of topological spin textures in an applied field.

36 MATERIALS SCIENCE↗
DOE OSTI2023

40 Years of SCES at Los Alamos

Reports of unconventional superconductivity in UBe 13 in 1983 and soon thereafter of the possible coexistence of bulk superconductivity and spin fluctuations in UPt 3 marked the beginning of a 40-year adventure in the study of strongly correlated quantum materials and phenomena at Los Alamos. The subsequent discovery and exploration of heavy-fermion magnetism, cuprates, Kondo insulators, Ce- and Pu-115 superconductors and, more broadly, quantum states of narrow-band systems provided challenges for the next 30 years. Progress was not made in a vacuum but benfitted from significant advances in the Americas, Asia and Europe as well as from essential collaborations, visitors and Los Alamos students and postdocs, many subsequently setting their own course in SCES. As often the case, serendipity played a role in shaping this history.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strain and ligand effects in Pt-Ni alloys studied by valence-to-core X-ray emission spectroscopy

Experimental detection of the Pt 5d densities of states in the valence band is conducted on a series of Pt-Ni alloys by high energy resolution valence-to-core X-ray emission spectroscopy (VTC-XES) at the Pt L 3 -edge. VTC-XES measurements reveal that the Pt d-band centroid shifts away from the Fermi level upon dilution, accompanied by concentration-dependent Pt d-band width. The competition between the strain effect and ligand effect is observed experimentally for the first time. It is found that the d-band widths in Pt 3 Ni and PtNi are broader than that of Pt metal due to compressive strain which overcompensates the effect of dilution, while it is narrower in PtNi 3 where the ligand effect dominates. VTC-XES is demonstrated to be a powerful tool to study the Pt d-band contribution to the valence band of Pt-based bimetallic. The implication for the enhanced activity of Pt-Ni catalysts in oxygen reduction reaction is discussed.

36 MATERIALS SCIENCE↗