Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STARTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Experimental and Theoretical Study of Selectivity in Mechanochemical Cocrystallization of Nicotinamide with Anthranilic and Salicylic Acid

Selectivity in mechanochemical cocrystal formation between nicotinamide and anthranilic acid or salicylic acid was studied using tandem in situ reaction monitoring by powder X-ray diffraction (PXRD) and Raman spectroscopy. Here, welectivity was probed by offering a competing cocrystal coformer to a previously prepared cocrystal or under competitive reaction conditions where all cocrystal coformers, in different stoichiometric ratios, were introduced together in the starting reaction mixture. Reaction paths were dependent on the starting mixture composition, and we find that the formation of intermediates and the final product can be predicted from solid-state ab initio calculations of relative energies of possible reaction mixtures. In some cases, quantitative assessment revealed different reaction profiles derived from PXRD and Raman monitoring, directly indicating, for the first time, different mechanochemical reactivity on the molecular and the bulk crystalline level of the reaction mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating Ternary Li–Mg–Si Zintl Phase Formation and Evolution for Si Anodes in Li-Ion Batteries with Mg(TFSI) 2 Electrolyte Additive

Improved electrochemical performance of Si was recently reported by adding multivalent cation salts (such as Mg 2+ , Al 3+ , Ca 2+, etc.) in the electrolyte. This is achieved via the formation in an in situ manner of relatively more stable Li-M-Si ternary phases with less chemical reactivity. These phases stabilize Si anions and thus reduce side reactions with electrolytes at the surface and eventually benefit the overall electrochemistry. To understand the mechanism of ternary Zintl phase formation and its dynamics upon lithiation/delithiation, high-resolution solid-state 7 Li and 29 Si nuclear magnetic resonance (NMR) are utilized to directly probe the local Li and Si environments on Si electrodes harvested from coin and pouch cells at various states of (de)lithiation. The NMR spectra along with the electrochemical characterization reveal that lithiation of Si starts from the surface Si-O layer further confirmed by 7 Li– 29 Si cross-polarization NMR. Lithiation progresses with heterogeneous silicon clustering with Si -4 anions at high states of lithiation. At a fully lithiated state, the formation of overlithiated Si species is detected. At a low-voltage region (below 100 mV), direct evidence for Mg-ion insertion is found, postulated by two possible mechanisms: ion exchange with fully or overlithiated binary domains (Li 3.75+x Si) and/or a coinsertion with slightly underlithiated domains (similar to Li 3.55 Si). Upon delithiation, Li extraction starts from overlithiated Si domains. No evidence is found for electrochemical Mg removal. Evidence for a lithium-deficient Li y Mg 0.1 Si phase is found as a result of Li removal during charging. This investigation sheds light on the possible mechanisms of a new Si anode chemistry, which could enable the development of stable Si-based anodes for lithium-ion batteries.

25 ENERGY STORAGE↗

Investigating the Intercalation Chemistry of Alkali Ions in Fluoride Perovskites

Reversible intercalation reactions provide the basis for modern battery electrodes. Despite decades of exploration of electrode materials, the potential for materials in the nonoxide chemical space with regards to intercalation chemistry is vast and rather untested. Transition metal fluorides stand out as an obvious target. To this end, we report herein a new family of iron fluoride-based perovskite cathode materials A x K 1–x FeF 3 (A = Li, Na). By starting with KFeF 3 , approximately 75% of K + ions were subsequently replaced by Li + and Na + through electrochemical means. X-ray diffraction and Fe X-ray absorption spectroscopy confirmed the existence of intercalation of alkali metal ions in the perovskite structure, which is associated with the Fe 2+/3+ redox couple. A computational study by density functional theory showed agreement with the structural and electrochemical data obtained experimentally, which suggested the possibility of fluoride-based materials as potential intercalation electrodes. This study increases our understanding of the intercalation chemistry of ternary fluorides, which could inform efforts toward the exploration of new electrode materials.

36 MATERIALS SCIENCE↗

Developing a Descriptor-Based Approach for CO and NO Adsorption Strength to Transition Metal Sites in Zeolites

The discovery of new materials tailored for a given application typically requires the screening of a large number of compounds, and this process can be significantly accelerated by computational analysis. In such an approach the performance of a compound is correlated to a materials property, a so-called descriptor. Here we develop a descriptor-based approach for the adsorption of CO and NO to Cu, Ni, Co, and Fe sites in zeolites. Here we start out by discussing a possible design strategy for zeolite catalysts, define the studied test set of sites in the zeolites SSZ-13 and mordenite, and define a set of appropriate descriptors. In a subsequent step we use these descriptors in single-parameter, two-parameter, and multiparameter regression analysis and finally use a machine-learning genetic algorithm to reduce the number of variables. We find that one or two descriptors are not sufficient to accurately capture the interactions between molecules and metal centers in zeolites, and indeed a multiparameter approach is necessary. Even though many of the descriptors are directly correlated, we identify the position of the s orbital and the number of valence electrons of the active site as well as the HOMO–LUMO gap of the adsorbate as most important descriptors. Furthermore, the reconstruction of the active sites upon adsorption plays a crucial role, and when it is explicitly included in the analysis, correlations improve significantly. In the future we expect that the fundamental methodology developed here will be adapted and transferred to selected problems in adsorption and catalysis and will assist the rational design of materials for the given application.

36 MATERIALS SCIENCE↗

Computational Design of Synthetic Enzymes

We review the standard model for de novo computational design of enzymes, which primarily focuses on the development of an active-site geometry, composed of protein functional groups in orientations optimized to stabilize the transition state, for a novel chemical reaction not found in nature. Its emphasis is placed on the structure and energetics of the active site embedded in an accommodating protein that serves as a physical support that shields the reaction chemistry from solvent, which is typically improved upon by laboratory-directed evolution. We also provide a review of design strategies that move beyond the standard model, by placing more emphasis on the designed enzyme as a whole catalytic construct. Starting with complete de novo enzyme design examples, we consider additional design factors such as entropy of individual residues, correlated motion between side chains (mutual information), dynamical correlations of the enzyme motions that could aid the reaction, reorganization energy, and electric fields as ways to exploit the entire protein scaffold to improve upon the catalytic rate, thereby providing directed evolution with better starting sequences for increasing biocatalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Insights into the Coupling of Methane Combustion and Steam Reforming in a Catalytic Plate Reactor in Transient Mode

The microstructured reactor concept is very promising technology to develop a compact reformer for distributed hydrogen generation. In this work, a catalytic plate reactor (CPR) is developed and investigated for the coupling of methane combustion (MC) and methane steam reforming (MSR) over Pt/Al 2 O 3 -coated microchannels in cocurrent and counter-current modes in transient experiments during start-up. A three-dimensional (3D) computational fluid dynamics (CFD) simulation shows uniform velocity and pressure distribution profiles in microchannels. For a channel velocity from 5.1 to 57.3 m/s in the combustor, the oxidation of methane is complete and self-sustainable without explosion, blow-off, or extinction; nevertheless, flashbacks are observed in counter-current mode. In the reformer, the maximum methane conversion is 84.9% in cocurrent mode, slightly higher than that of 80.2% in counter-current mode at a residence time of 33 ms, but at the cost of three times higher energy input in the combustor operating at ~1000 °C. Nitric oxide (NO) is not identified in combustion products, but nitrous oxide (N 2 O) is a function of coupling mode and forms significantly in cocurrent mode. Furthermore, this research would be helpful to establish the start-up strategy and environmental impact of compact reformers on a small scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Single Small-Scale Plutonium Redox Reaction System Yields Three Crystallographically-Characterizable Organoplutonium Complexes

Here, an approach to obtaining substantial amounts of data from a hazardous starting material that can only be obtained and handled in small quantities is demonstrated by the investigation of a single small-scale reaction of cyclooctatetraene, C 8 H 8 , with a solution obtained from the reduction of Cp' 3 Pu (Cp' = C 5 H 4 SiMe 3 ) with potassium graphite. This one reaction coupled with oxidation of a product has provided single-crystal X-ray structural data on three organoplutonium compounds as well as information on redox chemistry thereby demonstrating an efficient route to new reactivity and structural information on this highly radioactive element. The crystal structures were obtained from the reduction of C 8 H 8 by a putative Pu(II) complex, (Cp' 3 Pu II ) 1– , generated in situ, to form the Pu(III) cyclooctatetraenide complex, [K(crypt)][(C 8 H 8 ) 2 Pu III ], 1-Pu , and the tetra(cyclopentadienyl) Pu(III) complex, [K(crypt)][Cp' 4 Pu III ], 2-Pu . Oxidation of the sample of 1-Pu with Ag(I) afforded a third organoplutonium complex that has been structurally characterized for the first time, (C 8 H 8 ) 2 Pu IV , 3-Pu . Complexes 1-Pu and 3-Pu contain Pu sandwiched between parallel (C 8 H 8 ) 2– rings. The (Cp' 4 Pu III ) – anion in 2-Pu features three η 5 -Cp' rings and one η 1 -Cp' ring, which is a rare example of a formal Pu–C η 1 -bond. In addition, this study addresses the challenge of small-scale synthesis imparted by radiological and material availability of transuranium isotopes, in particular that of pure metal samples. A route to an anhydrous Pu(III) starting material from the more readily available Pu IV O 2 was developed to facilitate reproducible syntheses and allow complete spectroscopic analysis of 1-Pu and 2-Pu . Pu IV O 2 was converted to Pu III Br 3 (DME) 2 (DME = CH 3 OCH 2 CH 2 OCH 3 ) and subsequently Pu III Br 3 (THF) x , which was used to independently synthesize 1-Pu , 2-Pu , and 3-Pu .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Reactions of U(DMSO) 8 (ClO 4 ) 4 with Terpyridine Yield Dimeric Hydrolysis Products and Induce C–C Coupling

Reactions have been carried out using UIV(DMSO) 8 (ClO 4 ) 4 with 2,2′:6′,2″-terpyridine (terpy) under nonaqueous conditions. At room temperature in acetonitrile, the combination of the U(IV) starting material with terpy resulted in a mixture containing [UO 2 (DMSO) 2 terpy][ClO 4 ] 2 ·MeCN, while increasing the water content led to the hydrolysis products [(UO 2 (DMSO)terpy) 2 (μ 2 –O)][ClO 4 ] 2 and [(UO 2 terpy) 2 (μ 2 –OH) 2 ][ClO 4 ] 2 ·MeCN·H 2 O. Performing the reaction at slightly elevated temperature with no added water led to the formation of [UO 2 sexipyridine][ClO 4 ] 2 ·MeCN. This new uranyl complex contains the hexadentate ligand 2,2′:6′,2″:6″,2″:6‴,2⁗:6⁗,2⁗′-sexipyridine, which formed in situ from the tetravalent uranium starting material, where photoexcited uranyl or in situ generated peroxide could have induced C–C coupling. Analysis of bonding in the dimeric uranyl species via quantum chemical methods revealed a small increase in covalency of the bridging oxo unit and a slightly greater stability compared to the bridging hydroxo compound, which causes a significant shift in the uranyl symmetric stretch in the Raman spectrum. Structural, spectroscopic, and computational comparisons are made across the series of compounds, providing insight into the bonding and reactivity of uranium in nonaqueous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Cs and H Exchange into Gaidonnayite and Proposed Mechanisms of Ion Diffusion

Here, the microporous mineral gaidonnayite Na 2 ZrSi 3 O 9 ·2H 2 O was studied to better understand its ion-exchange mechanisms, specifically for Cs + and H + ions. In situ Raman spectroscopy, in situ X-ray diffraction (XRD), simultaneous thermogravimetric analysis and differential scanning calorimetry (TGA/DSC), and in situ X-ray fluorescence were used to determine the exchange processes involved. The Raman spectra contain strong peaks that can be attributed to the vibrational modes for the 3MR symmetric stretch at 500 cm –1 , Si–O–Zr–O chain stretches at 938 cm –1 , and Si–O stretching in the 1000–1100 cm –1 range. The most prominent Raman shift during ion exchange is found near the 520 cm –1 peak, which corresponds to distortions of the 3MR substructure of gaidonnayite. In all instances of this study, the 3MR exhibited the highest amount of distortion during ion exchange, and the evolution of this distortion is compared to unit-cell changes as measured from XRD data and elemental changes via XRF. The correlations between the Raman, XRD, and XRF data show rapid deformation of the 3MR during the onset of H + ion exchange in the Na form of gaidonnayite. Even when unit-cell volume changes were small (<3 Å 3 ) as in the cases for Cs + into Na-gaidonnayite and Cs + into H-gaidonnayite, significant changes in the ≈520 cm –1 peak were measured. By comparing XRD data and Raman data, and verifying the cation uptake by XRF, we were able to identify and confirm conformational changes and distortions in the crystal structure before, during, and after Cs + and H + exchange. Finally, Cs exchange occurred the fastest and with the greatest capacity when starting in the H-form at room temperature, and at elevated temperatures when starting in the Na-form.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-Energy Isomers of the Magic Number H + (H 2 O) 21 Cluster

Electronic structure calculations are used to characterize low-energy isomers of H + (H 2 O) 21 . Eleven different classes of isomers, based on the (H 2 O) 20 pentagonal dodecahedron with the excess proton localized on the surface (as a hydrated hydronium ion) and the “extra” water molecule located in the interior of the cluster, are characterized. In 10 of these classes, the internal water molecule is engaged in six 5-membered rings, but in the remaining class, which is predicted to start at only 0.6 kcal/mol above the global minimum, the internal water is engaged in a 4- membered ring, an additional 6-membered ring, and four 5- membered rings. In addition, isomers with two 4-membered rings and two 6-membered rings on the cluster surface are predicted to start at only ∼1.3 kcal/mol above the lowest-energy dodecahedralbased structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Interactions within and between Peptide Amphiphile Supramolecular Filaments

Many peptides are able to self-assemble into one-dimensional (1D) nanostructures, such as cylindrical fibers or ribbons of variable widths, but the relationship between the morphology of 1D objects and their molecular structure is not well understood. Here, we use coarse-grained molecular dynamics (CG-MD) simulations to study the nanostructures formed by self-assembly of different peptide amphiphiles (PAs). The results show that ribbons are hierarchical superstructures formed by laterally assembled cylindrical fibers. Simulations starting from bilayer structures demonstrate the formation of filaments, whereas other simulations starting from filaments indicate varying degrees of interaction among them depending on chemical structure. These interactions are verified by observations using atomic force microscopy of the various systems. The interfilament interactions are predicted to be strongest in supramolecular assemblies that display hydrophilic groups on their surfaces, while those with hydrophobic ones are predicted to interact more weakly as confirmed by viscosity measurements. The simulations also suggest that peptide amphiphiles with hydrophobic termini bend to reduce their interfacial energy with water, which may explain why these systems do not collapse into superstructures of bundled filaments. The simulations suggest that future experiments will need to address mechanistic questions about the self-assembly of these systems into hierarchical structures, namely, the preformation of interactive filaments vs equilibration of large assemblies into superstructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Cytochrome c Folding Transitions upon Phototriggered Environmental Perturbations Using Time-Resolved X-ray Scattering

Direct tracking of protein structural dynamics during folding–unfolding processes is important for understanding the roles of hierarchic structural factors in the formation of functional proteins. As such, using cytochrome c (cyt c) as a platform, we investigated its structural dynamics during folding processes triggered by local environmental changes (i.e., pH or heme iron center oxidation/spin/ligation states) with time-resolved X-ray solution scattering measurements. Starting from partially unfolded cyt c, a sudden pH drop initiated by light excitation of a photoacid caused a structural contraction in microseconds, followed by active site restructuring and unfolding in milliseconds. In contrast, the reduction of iron in the heme via photoinduced electron transfer did not affect conformational stability at short timescales (<1 ms), despite active site coordination geometry changes. These results demonstrate how different environmental perturbations can change the nature of interaction between the active site and protein conformation, even within the same metalloprotein, which will subsequently affect the folding structural dynamics.

Rimmerman, Dolev↗

Mechanochemistry of the LiBH 4 –AlCl 3 System: Structural Characterization of the Products by Solid-State NMR

The double-cation metal borohydride, Li 4 Al 3 (BH 4 ) 13 , mechanochemically produced from a 13:3 mixture of lithium borohydride (LiBH 4 ) and aluminum chloride (AlCl 3 ), has a low hydrogen desorption temperature; however, the material’s decomposition is accompanied by a large emission of toxic diborane (B 2 H 6 ). In this study, we found that a decrease of the LiBH 4 :AlCl 3 ratio in the starting mixture yields increased amounts of partially chlorinated products that also dehydrogenate at low temperature, but release negligibly small amounts of diborane. Extensive characterization by solid-state NMR spectroscopy (SSNMR) and powder X-ray diffraction (XRD) found that the 11:3 ratio product maintains the Li 4 Al 3 (BH 4 ) 13- like structure, with additional Cl – anions substituting for [BH 4 ] – compared to the 13:3 mixture. Further decrease of relative LiBH 4 concentration in the starting mixture to 9:3 results in a different product composed of tetrahedral [Al(BH 4 ) 4 ] - and [Al(BH 4 ) 2 Cl 2 ] - complexes, in which two hydrogen atoms of each borohydride group are bridged to aluminum sites. Additionally, SSNMR revealed the covalent character of the Al–H bonds, which is not observed in Li 4 Al 3 (BH 4 ) 13 . In conclusion, these findings suggest that the Al–Cl bonding present in the chlorinated complexes prevents the formation of Al(BH 4 ) 3 , which is a known intermediate leading to the formation of diborane during thermal dehydrogenation of the nearly chlorine-free Li 4 Al 3 (BH 4 ) 13 .

36 MATERIALS SCIENCE↗

In Situ Study of Particle Precipitation in Metal-Doped CeO2 during Thermal Treatment and Ion Irradiation for Emulation of Irradiating Fuels

Metallic particles formed in oxide fuels (e.g., UO 2 ) during neutron irradiation have an adverse impact on fuel performance. A fundamental investigation of particle precipitation is needed to predict the fuel performance and potentially improve fuel designs and operations. In this study, we report on the precipitation of Mo-dominant β-phase particles in polycrystalline CeO 2 (surrogate for UO 2 ) films doped with Mo, Pd, Rh, Ru, and Re (surrogate for Tc). In situ heating scanning transmission electron microscopy indicates that particle precipitation starts at ~1073 K with a limited particle growth to ~10 nm. While particle concentration increases with increasing temperature, particle size remains largely unchanged up to 1273 K. There is a dramatic change in the microstructure following vacuum annealing at 1373 K, probably due to phase transition of reduced cerium oxide. At the high temperature, particles grow up to 75 nm or larger with distinctive facets. The particles are predominantly composed of Mo with a body-centered cubic structure (β phase). An oxide layer was observed after storage at ambient conditions. In situ heating X-ray photoelectron spectroscopy reveals an increasing reduction of Ce charge state from 4+ to 3+ in the doped CeO 2 film at temperatures from 673 to 1273 K. In situ ion irradiation transmission electron microscopy with 2 MeV Al 2+ ions up to a dose of ~20 displacements per atom at nominally room temperature does not lead to precipitation of visible particles. However, irradiation with 1.7 MeV Au 3+ ions to ~10 dpa at 973 K produces ~2 nm sized pure Pd particles; Au 3+ irradiation at 1173 K appears to result in precipitates of ~6 nm in size. Some of the defects produced by ion irradiation could be nucleation sites for precipitation, leading to generation of smaller particles with a higher concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Molecular Investigation of the Solid-Electrolyte Interphase of an Anode-Free Lithium Metal Battery Using In Situ Liquid SIMS and Cryo-TEM

Solid electrolyte interphase (SEI) has been widely perceived to play a critical role in the stable cycling of rechargeable batteries. However, associated with the fragile and air-sensitive nature of the SEI layer, delineation of the formation process and the nature of SEI remains a big challenge. Here, we use in situ liquid time-of-flight secondary ion mass spectroscopy (TOF-SIMS), cryo- transmission electron microscope (TEM) and density functional theory (DFT) calculation to delineate molecular process on the formation of SEI layer under the dynamic operating condition. We discover that the onset potential for SEI layer formation and the thickness of the SEI show dependence on the solvation shell structure. Using LiCoO 2 as a cathode and Cu film as an anode, the SEI is noticed to start to form at around 2.0 V and reach its final thickness (irreversible part, ~ 40-50 nm) at about 3.0 V in the 1 M LiPF 6 –EC/DMC electrolyte, while for the case of 1 M LiFSI–DME, the SEI starts to form at around 1.5 V and reaches its final thickness (~ 20 nm) at about 2.0 V. The in situ TOF-SIMS clearly indicates the outer SEI layer formation and dissipation upon charging and discharging, implying a continued evolution of electrolyte structure with extended cycling. In conclusion, the present work establishes a direct correlation between the molecular signature of SEI layer with solvation feature of electrolytes in lithium batteries, providing insights for tailoring SEI layer toward improved electrochemical properties of lithium batteries.

25 ENERGY STORAGE↗

Morphological Evolution of Multilayer Ni/NiO Thin Film Electrodes during Lithiation

Oxide conversion reactions in lithium ion batteries are challenged by substantial irreversibility associated with significant volume change during the phase separation of an oxide into lithia and metal species (e.g., NiO + 2Li + + 2e – → Ni + Li 2 O). In this work, we demonstrate that the confinement of nanometer-scale NiO layers within a Ni/NiO multilayer electrode can direct lithium transport and reactivity, leading to coherent expansion of the multilayer. The morphological changes accompanying lithiation were tracked in real-time by in-operando X-ray reflectivity (XRR) and ex-situ cross-sectional transmission electron microscopy on well-defined periodic Ni/NiO multilayers grown by pulsed-laser deposition. Comparison of pristine and lithiated structures reveals that the nm-thick nickel layers help initiate the conversion process at the interface and then provide an architecture that confines the lithiation to the individual oxide layers. XRR data reveal that the lithiation process starts at the top and progressed through the electrode stack, layer by layer resulting in a purely vertical expansion. Longer term cycling showed significant reversible capacity (~800 mA h g –1 after ~100 cycles), which we attribute to a combination of the intrinsic bulk lithiation capacity of the NiO and additional interfacial lithiation capacity. These observations provide new insight into the role of metal/metal oxide interfaces in controlling lithium ion conversion reactions by defining the relationships between morphological changes and film architecture during reaction.

36 MATERIALS SCIENCE↗

Multiscale Morphology of Nanoporous Copper Made from Intermetallic Phases

Many application-relevant properties of nanoporous metals critically depend on their multiscale architecture. For example, the intrinsically high step-edge density of curved surfaces at the nanoscale provides highly reactive sites for catalysis, whereas the macroscale pore and grain morphology determines the macroscopic properties, such as mass transport, electrical conductivity, or mechanical properties. Here, in this work, we systematically study the effects of alloy composition and dealloying conditions on the multiscale morphology of nanoporous copper (np-Cu) made from various commercial Zn–Cu precursor alloys. Using a combination of X-ray diffraction, electron backscatter diffraction, and focused ion beam cross-sectional analysis, our results reveal that the macroscopic grain structure of the starting alloy surprisingly survives the dealloying process, despite a change in crystal structure from body-centered cubic (Zn–Cu starting alloy) to face-centered cubic (Cu). The nanoscale structure can be controlled by the acid used for dealloying with HCl leading to a larger and more faceted ligament morphology compared to that of H 3 PO 4 . Finally, anhydrous ethanol dehydrogenation was used as a probe reaction to test the effect of the nanoscale ligament morphology on the apparent activation energy of the reaction.

36 MATERIALS SCIENCE↗