Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCREEN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

A Predictive Bubble Point Pressure Model for Porous Liquid Acquisition Device Screens

This article presents a simplified model for porous screen channel liquid acquisition devices based on a maximum bubble point pressure method from Adamson and Gast (1997). To validate the model, three 304 stainless steel (325 × 2300, 450 × 2750, and 510 × 3600) mesh samples were tested in methanol, acetone, isopropyl alcohol, and water. Screen pores are estimated based on analysis from scanning electron microscopy, historical data, and current test data. Results show that the bubble point pressure is proportional to the surface tension of the fluid only when accounting for nonzero contact angles. The previous assumption that bubble point pressure scales inversely with effective pore diameter is shown to be invalid, as the second finest 450 × 2750 produced the highest bubble point of the three screens. The simplified bubble point model can be used to make predictions for any pure fluid when pore diameters are based on bubble point tests and not SEM analysis.

Liquid Acquisition Device↗

Preparation, Performance and Mechanism of Tc and I Getters in Cementitious Waste Forms - 17124

Cementitious waste forms offer a low temperature, cost effective technology for the solidification of liquid wastes. At the Department of Energy Hanford Site, 99-Tc and 129-I are radionuclides contained within low activity waste (LAW) which contribute significantly to environmental impacts associated with clean-up of the site. Cast Stone, a cementitious waste form comprised of 47 wt% blast furnace slag, 45 wt% fly ash and 8 wt% ordinary Portland cement, has undergone investigation as a possible candidate technology for the solidification of LAW. In screening tests using EPA Method 1315 leach testing of various mixes of Cast Stone with simulated LAW, Tc observed effective diffusivities (Dobs) had an average of 5.3 x 10-11 cm{sup 2}/s and I Dobs had an average of 5.7 x 10-9 cm{sup 2}/s. From these measurements, an opportunity exists to improve retention of Tc and I by Cast Stone. One approach to accomplish this is through the incorporation of Tc and I getters to selectively sequester Tc and I in the waste stream and eventual waste form. Initial testing conducted at PNNL identified potassium metal sulfide (KMS-2) and Sn(II)-apatite (Sn-A) as the strongest performing Tc getters and silver exchanged zeolite (Ag-Z) as the top performing I getter. This research also demonstrated that the Tc and I getters, when added to solution simultaneously, can have deleterious interactions with one another and lower the Tc and I removal levels. However, these interactions can be overcome through sequential treatment of solution with the getters. Cast Stone samples were fabricated using a 6.5 M Na average LAW simulant spiked with Tc and I with the addition of various combinations of Tc and I getters. Through EPA Method 1315 and Method 1313 testing it was found that the KMS-2 Tc getter was most successful at lowering Tc Dobs. The I getters were not effective, as apparent interference from sulfide components of the waste form may have led to dissociation of the AgI formed by the Ag-Z getter in sequestering the I from solution. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Kinetic Isotope Effects for the Reactions of Muonic Helium and Muonium with H2

The neutral muonic helium atom may be regarded as the heaviest isotope of the hydrogen atom, with a mass of ~4.1 amu (4.1H), because the negative muon screens one proton charge. We report the reaction rate of 4.1H with 1H2 to produce 4.1H1H + 1H at 295 to 500 K. The experimental rate constants are compared with the predictions of accurate quantum mechanical dynamics calculations carried out on an accurate Born-Huang potential energy surface and with previously measured rate constants of 0.11H (where 0.11H is shorthand for muonium). Kinetic isotope effects can be compared for the unprecedentedly large mass ratio of 36. The agreement with accurate quantum dynamics is quantitative at 500 K, and variational transition state theory is used to interpret the extremely low (large inverse) kinetic isotope effects in the 10-4 to 10-2 range.

08 HYDROGEN↗

Novel approaches in anti-arenaviral drug development

Hemorrhagic fevers caused by arenaviruses are among the most devastating emerging human diseases. Considering the number of individuals affected, the current lack of a licensed vaccine, and the limited therapeutic options, arenaviruses are arguably among the most neglected tropical pathogens and the development of efficacious anti-arenaviral drugs is of high priority. Over the past years significant efforts have been undertaken to identify novel potent inhibitors of arenavirus infection. High throughput screening of small molecule libraries employing pseudotype platforms led to the discovery of several potent and broadly active inhibitors of arenavirus cell entry that are effective against the major hemorrhagic arenaviruses. Mechanistic studies revealed that these novel entry inhibitors block arenavirus membrane fusion and provided novel insights into the unusual mechanism of this process. The success of these approaches highlights the power of small molecule screens in antiviral drug discovery and establishes arenavirus membrane fusion as a robust drug target. These broad screenings have been complemented by strategies targeting cellular factors involved in productive arenavirus infection. Approaches targeting the cellular protease implicated in maturation of the fusion-active viral envelope glycoprotein identified the proteolytic processing of the arenavirus glycoprotein precursor as a novel and promising target for anti-arenaviral strategies.

60 APPLIED LIFE SCIENCES↗

Deep Learning‐Assisted Automated Single Cell Electroporation Platform for Effective Genetic Manipulation of Hard‐to‐Transfect Cells

Abstract Genome engineering of cells using CRISPR/Cas systems has opened new avenues for pharmacological screening and investigating the molecular mechanisms of disease. A critical step in many such studies is the intracellular delivery of the gene editing machinery and the subsequent manipulation of cells. However, these workflows often involve processes such as bulk electroporation for intracellular delivery and fluorescence activated cell sorting for cell isolation that can be harsh to sensitive cell types such as human‐induced pluripotent stem cells (hiPSCs). This often leads to poor viability and low overall efficacy, requiring the use of large starting samples. In this work, a fully automated version of the nanofountain probe electroporation (NFP‐E) system, a nanopipette‐based single‐cell electroporation method is presented that provides superior cell viability and efficiency compared to traditional methods. The automated system utilizes a deep convolutional network to identify cell locations and a cell‐nanopipette contact algorithm to position the nanopipette over each cell for the application of electroporation pulses. The automated NFP‐E is combined with microconfinement arrays for cell isolation to demonstrate a workflow that can be used for CRISPR/Cas9 gene editing and cell tracking with potential applications in screening studies and isogenic cell line generation.

59 BASIC BIOLOGICAL SCIENCES↗

The layer boundary effect on multi-layer mesoporous TiO 2 film based dye sensitized solar cells

Multi-layer mesoporous TiO 2 prepared by screen printing is widely used for fabrication of high-efficiency dye-sensitized solar cells (DSSCs). Here, we compare the three types of ~10 um thick mesoporous TiO 2 films, which were screen printed as 1-, 2- and 4-layers using the same TiO 2 nanocrystal paste. The layer boundary of the multi-layer mesoporous TiO 2 films was observed in the cross-section SEM. The existence of a layer boundary could reduce the photoelectron diffusion length with the increase of layer number. However, the photoelectron diffusion lengths of the Z907 dye sensitized solar cells based on these different layered mesoporous TiO 2 films are all longer than the film thickness. Consequently, the photovoltaic performance seems to have little dependence on the layer number of the multi-layer TiO 2 based DSSCs.

14 SOLAR ENERGY↗

Numerical simulation of diffusion-controlled droplet growth Dynamical correlation effects

Diffusion-controlled coarsening (Ostwald ripening) of precipitated solutions is studied by numerical simulation. An algorithm is devised which exploits the screening of solute concentration fields, thereby removing the restriction to small systems of previous work. Simulation of the coarsening of 5000 droplets at 10-percent volume fraction reveals long-ranged dynamical correlations which broaden the droplet size-distribution function and increase the coarsening-rate coefficient.

Beenakker, C. W. J.↗

Techno-economic analysis of biomass value-added processing informed by pilot scale de-ashing of paper sludge feedstock

Paper sludge biomass represents an underutilized feedstock rich in pulped and processed cellulose which is currently a waste stream with significant disposal cost to industry for landfilling services. Effective fractionation of the cellulose from paper sludge presents an opportunity to yield cellulose as feedstock for value-added processes. A novel approach to cellulose fractionation is the sidehill screening system, herein studied at the pilot-plant scale. Composition analysis determined ash removal and carbohydrate retention of both sidehill and high-performance benchtop screening systems. Sidehill screening resulted in greater carbohydrates retention relative to benchtop screening (90% vs 66%) and similar ash removal (95% vs 98%). Techno-economic analysis for production of sugar syrup yielded a minimum selling price of $331/metric ton of sugar syrup including disposal savings, significantly less than a commercial sugar syrup without fractionation. Furthermore, sensitivity analysis showed that screening conditions played a significant role in economic feasibility for cellulosic yield and downstream processes.

09 BIOMASS FUELS↗

High-Performance Screen-Printed Thermoelectric Films on Fabrics

Printing techniques could offer a scalable approach to fabricate thermoelectric (TE) devices on flexible substrates for power generation used in wearable devices and personalized thermo-regulation. However, typical printing processes need a large concentration of binder additives, which often render a detrimental effect on electrical transport of the printed TE layers. Here, we report scalable screenprinting of TE layers on flexible fiber glass fabrics, by rationally optimizing the printing inks consisting of TE particles (p-type Bi 0.5 Sb 1.5 Te 3 or n-type Bi 2 Te 2.7 Se 0.3 ), binders, and organic solvents. We identified a suitable binder additive, methyl cellulose, which offers suitable viscosity for printability at a very small concentration (0.45–0.60 wt.%), thus minimizing its negative impact on electrical transport. Following printing, the binders were subsequently burnt off via sintering and hot pressing. We found that the nanoscale defects left behind after the binder burnt off became effective phonon scattering centers, leading to low lattice thermal conductivity in the printed n-type material. With the high electrical conductivity and low thermal conductivity, the screen-printed TE layers showed high room-temperature ZT values of 0.65 and 0.81 for p-type and n-type, respectively.

36 MATERIALS SCIENCE↗

Case Study of High-Throughput Drug Screening and Remote Data Collection for SARS-CoV-2 Main Protease by Using Serial Femtosecond X-ray Crystallography

Since early 2020, COVID-19 has grown to affect the lives of billions globally. A worldwide investigation has been ongoing for characterizing the virus and also for finding an effective drug and developing vaccines. As time has been of the essence, a crucial part of this research has been drug repurposing; therefore, confirmation of in silico drug screening studies have been carried out for this purpose. Here we demonstrated the possibility of screening a variety of drugs efficiently by leveraging a high data collection rate of 120 images/second with the new low-noise, high dynamic range ePix10k2M Pixel Array Detector installed at the Macromolecular Femtosecond Crystallography (MFX) instrument at the Linac Coherent Light Source (LCLS). The X-ray Free-Electron Laser (XFEL) is used for remote high-throughput data collection for drug repurposing of the main protease (Mpro) of SARS-CoV-2 at ambient temperature with mitigated X-ray radiation damage. We obtained multiple structures soaked with nine drug candidate molecules in two crystal forms. Although our drug binding attempts failed, we successfully established a high-throughput Serial Femtosecond X-ray crystallographic (SFX) data collection protocol.

60 APPLIED LIFE SCIENCES↗

Fully convolutional neural network for removing background in noisy images of uranium bearing particles

A fully convolutional neural network (FCN) was developed to supersede automatic or manual thresholding algorithms used for tabulating SIMS particle search data. The FCN was designed to perform a binary classification of pixels in each image belonging to a particle or not, thereby effectively removing background signal without manually or automatically determining an intensity threshold. Using 8,000 images from 28 different particle screening analyses, the FCN was trained to accurately predict pixels belonging to a particle with near 99% accuracy. Background eliminated images were then segmented using a watershed technique in order to determine isotopic ratios of particles. A comparison of the isotopic distributions of an independent data set segmented using the neural network, compared to a commercially available automated particle measurement (APM) program developed by CAMECA, highlighted the necessity for effective background removal to ensure that resulting particle identification is not only accurate, but preserves valuable signal that could be lost due to improper segmentation. The FCN approach improves the robustness of current state-of-the-art particle searching algorithms by reducing user input biases, resulting in an improved absolute signal per particle and decreased uncertainty of the determined isotope ratios.

Tarolli, Jay G. (ORCID:0000000307369057)↗

Tunneling magnetoresistance and electroresistance in Fe/PbTiO{sub 3}/Fe multiferroic tunnel junctions

We perform first-principles electronic structure and spin-dependent transport calculations for a Fe/PbTiO{sub 3}/Fe multiferroic tunnel junction with asymmetric TiO{sub 2}- and PbO-terminated interfaces. We demonstrate that the interfacial electronic reconstruction driven by the in situ screening of ferroelectric polarization, in conjunction with the intricate complex band structure of barrier, play a decisive role in controlling the spin-dependent tunneling. Reversal of ferroelectric polarization results in a transition from insulating to half-metal-like conducting state for the interfacial Pb 6p{sub z} orbitals, which acts as an atomic-scale spin-valve by releasing the tunneling current in antiparallel magnetization configuration as the ferroelectric polarization pointing to the PbO-terminated interface. This effect produces large change in tunneling conductance. Our results open an attractive avenue in designing multiferroic tunnel junctions with excellent performance by exploiting the interfacial electronic reconstruction originated from the in situ screening of ferroelectric polarization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An experimental investigation on the characteristics of heat pipes with annular type composite wick structure

Here, an experimental investigation has been conducted on the hydraulic characteristics of annular type wick structures for heat pipes. An experimental facility which can measure porosity, permeability, and effective pore radius of the wick structures in a vacuum condition is established. Nine different types of multi-layered (6 layers in total) composite screen meshes are characterized. Based on the measurement results, a wick structure composed of one layer of 100×100 mesh, three layers of 400×400 mesh, and two layers of 60×60 mesh is determined to have the highest permeability to effective pore radius ratio $(K/r_{eff})$ and was selected as a targeted sample. The wick-to-wall gap effect on the hydraulic characteristics of annular type wick structure is also investigated by measuring the permeability and effective pore radius of the sample wick structure with varying gap widths. The result shows that the permeability increases as the gap increases from 0 mm to 1.2 mm. After a peak at 1.2 mm, the permeability decreases as the gap increases and converges to the value of the case measured without a wall structure. The effective pore radius becomes smaller as the gap increases, making a peak at a gap distance of 1.2 mm. This result implies that there is an optimal point in gap distance which is determined to be 1.2 mm for the selected composite mesh structure. A capillary limitation correlation with a multiplying factor which explains the enhanced performance of the wick due to the gap is suggested. An annular wick type heat pipe is constructed and tested. The capillary limitation of the heat pipe showed good agreement with the suggested correlation.

42 ENGINEERING↗

Aspects of nitrogen dioxide toxicity in environmental urban concentrations in human nasal epithelium

Cytotoxicity and genotoxicity of nitrogen dioxide (NO{sub 2}) as part of urban exhaust pollution are widely discussed as potential hazards to human health. This study focuses on toxic effects of NO{sub 2} in realistic environmental concentrations with respect to the current limit values in a human target tissue of volatile xenobiotics, the epithelium of the upper aerodigestive tract. Nasal epithelial cells of 10 patients were cultured as an air-liquid interface and exposed to 0.01 ppm NO{sub 2}, 0.1 ppm NO{sub 2}, 1 ppm NO{sub 2}, 10 ppm NO{sub 2} and synthetic air for half an hour. After exposure, genotoxicity was evaluated by the alkaline single-cell microgel electophoresis (Comet) assay and by induction of micronuclei in the micronucleus test. Depression of proliferation and cytotoxic effects were determined using the micronucleus assay and trypan blue exclusion assay, respectively. The experiments revealed genotoxic effects by DNA fragmentation starting at 0.01 ppm NO{sub 2} in the Comet assay, but no micronucleus inductions, no changes in proliferation, no signs of necrosis or apoptosis in the micronucleus assay, nor did the trypan blue exclusion assay show any changes in viability. The present data reveal a possible genotoxicity of NO{sub 2} in urban concentrations in a screening test. However, permanent DNA damage as indicated by the induction of micronuclei was not observed. Further research should elucidate the effects of prolonged exposure.

54 ENVIRONMENTAL SCIENCES↗

Mechanical component screening for scanner

The critical mechanical components of the scan mirror mechanism are described and their evaluation and screening procedures are discussed. A bumper/damper unit is used in the design to reverse motion of the mirror and effect scan and retrace cycles. A wear evaluation was conducted on the bumper impact surfaces that established nylon 6-10 as an acceptable material. The elastomeric dampers were subjected to thermal vacuum tests for condensables and outgassing as well as parametric life tests. The flexure pivots that support the mirror were tested to establish a curve of stress plotted as a function of cycles to failure for rotational operation. The pivots met the life requirement of 150,000,000 cycles at a + or - 2.9 deg amplitude during fatigue testing. Screening procedures were established for dampers and flexure pivots to obtain flight quality components.

Olson, J. L.↗

Comparison of interband related optical transitions and excitons in ZnGeN 2 and GaN

The optical dielectric function of ZnGeN 2 is calculated from the interband transitions using the energy bands calculated in the quasiparticle self-consistent (QS)GW^ method using two different levels of approximation: the independent particle approximation (IPA) and the Bethe-Salpeter Equation (BSE) approach. The first allows us to relate peaks in ε 2 to specific bands and k-points but does not include electron-hole interaction effects. The second includes electron-hole interaction or excitonic effects. The corresponding changes in the shape of ε 2 (ω) are found to be similar to those in GaN. The screened Coulomb interaction W^ is here calculated including electron-hole interactions in the polarization function and gives a band structure already going beyond the random phase approximation. The static dielectric constants including only electronic screening, commonly referred to as ε∞ , were calculated separately by extrapolating the wave vector dependent macroscopic dielectric function in the long-wavelength limit. Below the quasiparticle gap, we find three bound excitons optically active for different polarization. The convergence of these bound excitons with respect to the density of the k-mesh used in the BSE is studied and found to require a fine mesh. It is also found that these bound excitons originate from only the lowest conduction band and the top three valence bands. To incorporate the lattice screening, we include a scaling factor (ε∞/ε 0 ) 2 , which allows us to obtain exciton binding energies of the correct order of magnitude similar to those in GaN. Here, the excitons are related to each of the three fold split valence bands and the splittings of the latter are also studied as function of strain. Finally, a relation between the anisotropic effective masses and the valence band splitting is pointed out and explained.

36 MATERIALS SCIENCE↗

Ionic field effect and memristive phenomena in single-point ferroelectric domain switching

Electric field induced polarization switching underpins most functional applications of ferroelectric materials in information technology, materials science, and optoelectronics. In the last 20 years, much attention has been focused on the switching of individual domains using scanning probe microscopy, both as model of ferroelectric data storage and approach to explore fundamental physics of ferroelectric switching. The classical picture of tip induced switching includes formation of cylindrical domain oriented along the tip field, with the domain size is largely determined by the tip-induced field distribution and domain wall motion kinetics. The polarization screening is recognized as a necessary precondition to the stability of ferroelectric phase; however, screening processes are generally considered to be uniformly efficient and not leading to changes in switching behavior. Here, we demonstrate that single-point tip-induced polarization switching can give rise to a surprisingly broad range of domain morphologies, including radial and angular instabilities. These behaviors are traced to the surface screening charge dynamics, which in some cases can even give rise to anomalous switching against the electric field (ionic field effect). The implications of these behaviors for ferroelectric materials and devices are discussed.

Ievlev, Anton↗

Assessment of Controlling Processes for Field-Scale Uranium Reactive Transport under Highly Transient Flow Conditions

This paper presents the results of a comprehensive model-based analysis of a uranium tracer test conducted at the U.S Department of Energy Hanford 300 Area (300A) IFRC site. A three-dimensional multi-component reactive transport model was employed to assess the key factors and processes that control the field-scale uranium reactive transport. Taking into consideration of relevant physical and chemical processes, the selected conceptual/numerical model replicates the spatial and temporal variations of the observed U(VI) concentrations reasonably well in spite of the highly complex field conditions. A sensitivity analysis was performed to interrogate the relative importance of various processes and factors for reactive transport of U(VI) at the field-scale. The results indicate that multi-rate U(VI) sorption/desorption, U(VI) surface complexation reactions, and initial U(VI) concentrations were the most important processes and factors controlling U(VI) migration. On the other hand, cation exchange reactions, the choice of the surface complexation model, and dual-domain mass transfer processes, which were previously identified to be important in laboratory experiments, played less important roles under the field-scale experimental condition at the 300A site. However, the model simulations also revealed that the groundwater chemistry was relatively stable during the uranium tracer experiment and therefore presumably not dynamic enough to appropriately assess the effects of ion exchange reaction and the choice of surface complexation models on U(VI) sorption and desorption. Furthermore, it also showed that the field experimental duration (16 days) was not sufficiently long to precisely assess the role of a majority of the sorption sites that were accessed by slow kinetic processes within the dual domain model. The sensitivity analysis revealed the crucial role of the intraborehole flow that occurred within the long-screened monitoring wells and thus significantly affected both field-scale measurements and simulated U(VI) concentrations as a combined effect of aquifer heterogeneity and highly dynamic flow conditions. Overall, this study, which provides one of the few detailed and highly data-constrained uranium transport simulations, highlights the difference in controlling processes between laboratory and field scale that prevent a simple direct upscaling of laboratory-scale models.

07 ISOTOPE AND RADIATION SOURCES↗