Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RETENTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Xenon diffusion following ion implantation into feldspar - Dependence on implantation dose

The diffusion properties of xenon implanted into feldspar, a major mineral in meteorites and lunar samples, are investigated in light of the importance of xenon diffusion in the interpretation of early solar system chronologies and the retention time of solar-wind-implanted Xe. Known doses of Xe ions were implanted at an energy of 200 keV into single-crystal plagioclase targets, and depth profiles were measured by alpha particle backscattering before and after annealing for one hour at 900 or 1000 C. The fraction of Xe retained following annealing is found to be strongly dependent on implantation dose, being greatest at a dose of 3 x 10 to the 15th ions/sq cm and decreasing at higher and lower doses. Xe retention is also observed to be unaffected by two-step anneals, or by implantation with He or Ar. Three models of the dose-dependent diffusion properties are considered, including epitaxial crystal regrowth during annealing controlled by the extent of radiation damage, the creation of trapping sites by radiation damage, and the inhibition of recrystallization by Xe during annealing

Melcher, C. L.↗

LANDSAT-D flight segment operations manual, volume 2

Functions, performance capabilities, modes of operation, constraints, redundancy, commands, and telemetry are described for the thematic mapper; the global positioning system; the direct access S-band; the multispectral scanner; the payload correction; the thermal control subsystem; the solar array retention, deployment, and jettison assembly; and the boom antenna retention, deployment, and jettison assembly for LANDSAT 4.

Varhola, J.↗

Craters and basins on Ganymede and Callisto - Morphological indicators of crustal evolution

The morphologic characteristics of craters and palimpsests on Ganymede and Callisto are surveyed, and the crustal properties of these satellites and the evolution of the properties are studied. The morphology of bowl-shaped craters, smooth-floored craters, craters without central peaks, craters with central pits, chain craters on Callisto, the Gilgamesh and Western Equatorial Basins on Ganymede, crater palimpsests and penepalimpsests, multiring structures on Callisto, and the Galileo Regio rimmed furrow system on Ganymede are described individually. The crustal evolution is addressed by examining the development of the Galileo Regio system, the distribution of crater retention ages, the record of ray clusters, the thermal history of the lithosphere of Ganymede, and the origin of the central pits. It is suggested that as the lithosphere of each satellite cooled and thickened, crater retentivity spread as a wave from the polar regions and the antapex toward the apex; at any given location, progressively larger craters were retained with the passage of time.

Passey, Q. R.↗

L Chondrite meteorites: A compilation and preliminary analyses

A compilation of those meteorites currently recognized as being L chondrites, exclusive of the numerous Antarctica finds, was made and is known as the L Chondrite Register. Data for these 576 meteorites was collected from a variety of sources, primarily the British Museum's Catalogue of Meteorites and the Appendix to the Catalogue of Meteorites. Also used was the Revised Cambridge Chondrite Compendium, which provided a convenient listing of L chondrites; other sources include Chinese Meteorites, Meteorites, by Wasson (1974), and the Meteoritical Bulletin of Meteoritics. This last source provided data for most recent falls and was referenced through March of 1982. All such data were recorded on a computer data file with a HP 2647A terminal, so that information could easily be retrieved and manipulated. For each meteorite, the petrographic class, location of find, fall date and hour, mass, mole per cent fayalite, weight per cent Fe, SiO2/MgO ratio, shock class, metal class, 4He abundance, UTh-H3 gas retention age, K-Ar gas retention age, and 21Ne cosmic ray exposure age, was recorded when known.

Silliman, A.↗

Liquid crystal polyester-carbon fiber composites

Liquid crystal polymers (LCP) have been developed as a thermoplastic matrix for high performance composites. A successful melt impregnation method has been developed which results in the production of continuous carbon fiber (CF) reinforced LCP prepreg tape. Subsequent layup and molding of prepreg into laminates has yielded composites of good quality. Tensile and flexural properties of LCP/CF composites are comparable to those of epoxy/CF composites. The LCP/CF composites have better impact resistance than the latter, although epoxy/CF composites possess superior compression and shear strength. The LCP/CF composites have good property retention until 200 F (67 % of room temperature value). Above 200 F, mechanical properties decrease significantly. Experimental results indicate that the poor compression and shear strength may be due to the poor interfacial adhesion between the matrix and carbon fiber as adequate toughness of the LCP matrix. Low mechanical property retention at high temperatures may be attributable to the low beta-transition temperature (around 80 C) of the LCP matrix material.

Chung, T. S.↗

Effect of substituted phenylnadimides on processing and properties of PMR polyimide composites

Three nitrophenylnadimide cure initiators and two phenylnadimides (without nitros) were evaluated as additives to PMR-15 resins and Celion 6000 graphite fiber composites. The results of a resin screening study eliminated all of the additives except 3-nitrophenylnadimide (NO2PN) for use as a low temperature curing additive for PMR-15. Thus, NO2PN and the two control additives were investigated in PMR-15 formulations from which Celion 6000 graphite fiber/PMR-15 composites were processed both with low temperature (274 C) and normal (316 C) cure cycles. Comparisons of the two processing cycles, the resultant glass transition temperatures (Tg), the ambient, 274 and 316 C composite mechanical properties determined before and after 316 C postcure, the 316 C thermo-oxidative weight losses and the retention of 316 C composite mechanical properties are presented. Empirical correlations of the type and amount of nadimide additives with processing parameters, Tg, composite mechanical properties, composite thermo-oxidative stability and long term retention of 316 C composite mechanical properties are also presented.

Alston, W. B.↗

Properties of autoclaved Gr/PI composites made from improved tack PMR-15 prepreg

Autoclave processing studies were conducted, using improved tack PMR-15 prepreg, to determine the effect of tack enhancing PMR resin modifications on composite processability and mechanical properties. Improved tack graphite fiber reinforced PMR-15 prepregs were prepared and exposed to ambient conditions for various times and then autoclave molded into composites. Composite specimens were prepared and tested for flexural and interlaminar shear strengths at room temperature and 316 C. The retention of flexural and interlaminar shear strength as a function of exposure in air at 316 C was also determined. The results show that the modified PMR resin solutions provide prepreg with improved tack and drape retention characteristics without adversely affecting processability or mechanical properties of autoclave molded graphite fiber reinforced PMR-15 composites.

Vannucci, R. D.↗

V-378A: A modified bismaleimide for advanced composites

Addition polyimides cure with no evolution of gaseous by-products at relatively low temperatures and may be cured at low pressures to yield composites with excellent hot-wet strength retention. These properaties have made them excellent candidates as matrix resins for advanced composites. However, commercially available bismaleimides are solids and difficult to handle in preimpregnated form. V-378A is an addition polyimide composed of a mixture of bismaleimides and other reactive ingredients formulated to provide good prepreg properties and handling, facile cure and excellent composite mechanical properties. Several curing mechanisms are utilized to provide the characteristics exhibited by V-378A. Part of the mechanism is free radial and takes place at ambient temperature and above. Other mechanisms are principally Diels-Alder in nature. V-378A prepregs are tacky at ambient temperature, but do not have long tacky outlife similar to some epoxies. V-378A yields composites which exhibit hot-wet strength retention which is superior to that provided by epoxy resin systems.

Street, S. W.↗

The 371 deg C mechanical properties of graphite/polyimide composites

A series of condensation polyimides based on pyromellitic dianhydride is synthesized and evaluated for potential application at 371 C. Several three-and four-ring benzenoid diamine systems containing oxygen bridging groups are investigated. Thermomechanical analysis of neat resin specimens indicate that the polyimide prepared from the dimethyl ester of pyrometallitic acid (PMDE) and 2,2-bis4-(4'-aminophenoxy) phenyl]-1,1,1,3,3,3- hexafluoropropane (BDAF) is the only resin system which has a glass transition temperature (Tg) above 371 C. The Tg of the PMDE/BDAF polyimide is found to be 390 C after a postcure air at 371 C for 24 hr. Unidirectional composites are fabricated from the PMDE/BDAF system and unsized Celion 6000 graphite fibers. Final cure temperatures in the range of 371 to 427 C with an applied pressure of 10.34 to 13.78 MPa are investigated. The void content of the composites ranges from 4.6 to 8.6 percent. Composites cured at 399 C under a pressure of 10.34 MPa and postcured in air at 371 C for 24 hr exhibit the highest 371 C interlaminar shear strength (ILSS, 40.7 MPa) and flexural strength (758 MPa). The thermo-oxidative stability of the composites is determined by subjecting specimens to isothermal exposure at 371 C in air at atmospheric pressure, as well as a pressure of 0.52 MPa. Specimens exposed at atmospheric pressure exhibit a weight loss of 12 percent after 200 hr of exposure and 88 percent retention of its original 371 C ILSS. In contrast, the specimens exposed at 0.52 MPa pressure exhibit a comparable weight loss after only 72 hr, and a 71 percent retention of its original 371 C ILSS.

Delvigs, P.↗

Effect of substituted phenylnadimides on processing and properties of PMR polyimide composites

Three nitrophenylnadimide cure initiators and two phenylnadimides (without nitros) were evaluated as additives to PMR-15 resins and Celion 6000 graphite fiber composites. The results of a resin screening study eliminated all of the additives except 3-nitrophenylnadimide (NO2PN) for use as a low temperature curing additive for PMR-15. Thus, NO2PN and the two control additives were investigated in PMR-15 formulations from which Celion 6000 graphite fiber/PMR-15 composites were processed both with low temperature (274 C) and normal (316 C) cure cycles. Comparisons of the two processing cycles, the resultant glass transition temperatures (Tg), the ambient, 274 and 316 C composite mechanical properties determined before and after 316 C postcure, the 316 C thermo-oxidative weight losses and the retention of 316 C composite mechanical properties are presented. Empirical correlations of the type and amount of nadimide additives with processing parameters, Tg, composite mechanical properties, composite thermo-oxidative stability and long term retention of 316 C composite mechanical properties are also presented.

Alston, W. B.↗

Soil types and forest canopy structures in southern Missouri: A first look with AIS data

Spectral reflectance properties of deciduous oak-hickory forests covering the eastern half of the Rolla Quadrangle were examined using Thematic Mapper (TM) data acquired in August and December, 1982 and Airborne Imaging Spectrometer (AIS) data acquired in August, 1985. For the TM data distinctly high relative reflectance values (greater than 0.3) in the near infrared (Band 4, 0.73 to 0.94 micrometers) correspond to regions characterized by xeric (dry) forests that overlie soils with low water retention capacities. These soils are derived primarily from rhyolites. More mesic forests characterized by lower TM band 4 relative reflectances are associated with soils of higher retention capacities derived predominately from non-cherty carbonates. The major factors affecting canopy reflectance appear to be the leaf area index (LAI) and leaf optical properties. The Suits canopy reflectance model predicts the relative reflectance values for the xeric canopies. The mesic canopy reflectance is less well matched and incorporation of canopy shadowing caused by the irregular nature of the mesic canopy may be necessary. Preliminary examination of high spectral resolution AIS data acquired in August of 1985 reveals no more information than found in the broad band TM data.

Green, G. M.↗

An experimental and analytical evaluation of the tapered tension-torsion strap concept

A new free-tip rotor moment controller designed to increase torque output (a restoring moment) was proposed. The controller would be used as a retention device for the freely pitching tip of a helicopter rotor. The new design featured a tapered tension-torsion strap instead of the previously used parellel strap. A tapered strap has a larger separation between the tension wires at the retention end than at the oscillating end; separation is equal at both ends for a parallel strap. A simple dynamic analysis was developed and an experiment performed to evaluate this tapered strap concept. The test results indicated that the torsional spring stiffness of the strap, represented by a torsional pendulum, increased with the amount of taper. The predicted dynamic characteristics of the pendulum also confirmed this observation and correlated reasonably well with the experimental results. It could be concluded from the experimental and analytical results that the tapered strap accomplished increased torque output when compared to the parellel strap.

Louie, Alexander↗

A robot end effector exchange mechanism for space applications

Efficient robot operation requires the use of specialized end effectors or tools for tasks. In spacecraft applications, the microgravity environment precludes the use of gravitational forces to retain the tools in holding fixture. As a result of this, a retention mechanism which forms a part of the tool storage container is required. A unique approach to this problem has resulted in the development of an end effector exchange mechanism that meets the requirements for spaceflight applications while avoiding the complexity usually involved. This mechanism uses multiple latching cams both on the manipulator and in the tool storage container, combined with a system of catch rings to provide retention in both locations and the required failure tolerance. Because of the cam configuration the mechanism operates passively, requiring no electrical commands except those needed to move the manipulator into position. Similarly, it inherently provides interlocks to prevent the release of one cam before its opposite number is engaged.

Gorin, Barney F.↗

One-dimensional calculations of a large impact on Uranus

One-dimensional, spherically symmetric hydrodynamic calculations of the effect of the impact of a 1-2 earth mass body on the gaseous envelope of Uranus, characterizing the impact as a partition of energy such that a fraction is deposited directly into the envelope, while the rest heats the core. A sharp transition is found between the cases of nearly-complete retention and dispersal, corresponding to energy-deposition values above or below a critical value. Within a realistic parameter range, the angular momentum of the Uranus system may be explained, together with the retention of a gaseous envelope of about 1 earth mass.

Korycansky, D. G.↗

On the nature and rate of resurfacing of Venus

Crrater production and obliteration are modeled for the plains of Venus, using (1) the observed distribution of Venus-crossing asteroids and comets; (2) viscous relaxation of crater topography; and (3) erosion and burial by atmospheric, volcanic, and tectonic processes. Crater lifetimes are assumed to be proportional to crater depths for both classes of obliterative processes although the individual criteria vary. An average crater retention age between 0.4 to 2.0 Gyr is estimated for plains, under the assumption that craters are produced and not removed. The range is driven by uncertainty in identifying degraded impact as opposed to volcanic craters. On the other hand, crater retention ages greater than about 1.6 Gyr are unlikely if viscous relaxation operates without loading of crater floor by burial. The preferred model has plains subject to crater production and obliteration processes that vary over both space and time.

Arvidson, Raymond E.↗

Manufactured soils for plant growth at a lunar base

Advantages and disadvantages of synthetic soils are discussed. It is pointed out that synthetic soils may provide the proper physical and chemical properties necessary to maximize plant growth, such as a toxic-free composition and cation exchange capacities. The importance of nutrient retention, aeration, moisture retention, and mechanical support as qualities for synthetic soils are stressed. Zeoponics, or the cultivation of plants in zeolite substrates that both contain essential plant-growth cations on their exchange sites and have minor amounts of mineral phases and/or anion-exchange resins that supply essential plant growth ions, is discussed. It is suggested that synthetic zeolites at lunar bases could provide adsorption media for separation of various gases, act as catalysts and as molecular sieves, and serve as cation exchangers in sewage-effluent treatment, radioactive-waste disposal, and pollution control. A flow chart of a potential zeoponics system illustrates this process.

Ming, Douglas W.↗

Are Noachian-age ridged plains (Nplr) actually Early Hesperian in age?

The Nplr ridged plains studied are quite thin (less than 150 m, with some less than 90 m) based on the smallest surviving craters from the different preserved crater retention surfaces. The thinness of the Nplr ridged plains permits craters from older surfaces to show through, leading to a greater total crater count than actually applies to the ridged-plains component of those surfaces. It is found that the ridged-plains mapped as Noachian-age Nplr actually resurfaced older Noachian cratered terrain in the Early Hesperian, creating crater retention surfaces of N(1) equals (25,000 +/- 3000) in the Memnonia and Argyre regions.

Frey, H. V.↗

Evaluation of the Strecker synthesis as a source of amino acids on carbonaceous chondrites

The Strecker synthesis (SS) has been proposed as the source of amino acids (AA) formed during aqueous alteration of carbonaceous chondrites. It is postulated that the aldehyde and ketone precursors of the meteoritic AA originated in interstellar syntheses and accreted on the meteorite parent body along with other reactant species in cometesimal ices. The SS has been run with formaldehyde, acetyldehyde, propionaldehyde, acetone, and methyl ketone as starting materials. To study the effect of minerals on the reaction, the SS was run in the presence and absence of dust from the Allende meteorite using deuterated aldehydes and ketones as starting materials. The products were studied by GC/MS. With the exception of glycine, the retention of deuterium in the AA was greater than 90 pct. Some D exchange with water does occur, however, and determination of the rate of exchange as a function of pH and temperature may allow some bounds to be placed on the duration of parent body aqueous alteration. The retention of D by the AA under conditions studied thus far is consistent with the model that a SS starting from interstellar aldehydes and ketones led to the production of meteoritic AA.

Lerner, N. R.↗