SEARCH · Engineering Papers

Results for “RANDOMNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Quiet-time electron increases, a measure of conditions in the outer solar system

One possible explanation for quiet-time electron increases, increases in the intensity of 3-12 MeV interplanetary electrons that have been reported by McDonald, Cline and Simnett, is discussed. It is argued that the electrons in quiet-time increases are galactic in origin, but that the observed increases are not the result of any variation in the modulation of these particles in the inner solar system. It is suggested instead that quiet-time increases may occur when more electrons than normal penetrate a modulating region that lies far beyond the orbit of earth. The number of electrons penetrating this region may increase when field lines that have experienced an unusually large random walk in the photosphere are carried by the solar wind out to the region. As evidence for this increased random walk, it is shown that five solar rotations before most of the quiet-time increases there is an extended period when the amplitude of the diurnal anisotropy, as is measured by the Deep River neutron monitor, is relatively low. Five rotations delay time implies that the proposed modulating region lies at approximately 30 AU from the Sun, assuming that the average solar wind speed is constant over this distance at approximately 400 km/sec.

Fisk, L. A.↗

NASA NTRS1972

Investigation of the performance characteristics of Doppler radar technique for aircraft collision hazard warning, phase 3

System studies, equipment simulation, hardware development and flight tests which were conducted during the development of aircraft collision hazard warning system are discussed. The system uses a cooperative, continuous wave Doppler radar principle with pseudo-random frequency modulation. The report presents a description of the system operation and deals at length with the use of pseudo-random coding techniques. In addition, the use of mathematical modeling and computer simulation to determine the alarm statistics and system saturation characteristics in terminal area traffic of variable density is discussed.

Source record↗

NASA NTRS1972

Conceptual design and feasibility evaluation model of a 10 to the 8th power bit oligatomic mass memory. Volume 1: Conceptual design

The oligatomic (mirror) thin film memory technology is a suitable candidate for general purpose spaceborne applications in the post-1975 time frame. Capacities of around 10 to the 8th power bits can be reliably implemented with systems designed around a 335 million bit module. The recommended mode was determined following an investigation of implementation sizes ranging from an 8,000,000 to 100,000,000 bits per module. Cost, power, weight, volume, reliability, maintainability and speed were investigated. The memory includes random access, NDRO, SEC-DED, nonvolatility, and dual interface characteristics. The applications most suitable for the technology are those involving a large capacity with high speed (no latency), nonvolatility, and random accessing.

Recksiedler, A. L.↗

NASA NTRS1972

A comparison of reliability and conventional estimation of safe fatigue life and safe inspection intervals

Both the conventional and reliability analyses for determining safe fatigue life are predicted on a population having a specified (usually log normal) distribution of life to collapse under a fatigue test load. Under a random service load spectrum, random occurrences of load larger than the fatigue test load may confront and cause collapse of structures which are weakened, though not yet to the fatigue test load. These collapses are included in reliability but excluded in conventional analysis. The theory of risk determination by each method is given, and several reasonably typical examples have been worked out, in which it transpires that if one excludes collapse through exceedance of the uncracked strength, the reliability and conventional analyses gave virtually identical probabilities of failure or survival.

Hooke, F. H.↗

NASA NTRS1971

Vertical resolution of temperature profiles obtained from remote radiation measurements

The Backus-Gilbert theory, originally developed for analysis of inversion problems associated with the physics of the solid earth, was applied to the problem of the vertical sounding of the atmosphere by means of remote radiation measurements. An application was made to spectral intervals 2.8/cm wide in the 667/cm band CO2, and tradeoff curves are presented which quantitatively define the relationship between intrinsic vertical resolution and random error in temperature profile estimates. It is found that for a 1-2 K random error with state-of-the-art instrumentation, the intrinsic vertical resolution ranges from approximately 0.5 locale scale height (l.s.h.) in the lower troposphere to greater than 2 l.s.h. in the upper stratosphere with approximately 1 l.s.h. resolution in the vicinity of the tropopause. These values are somewhat smaller than the widths of the radioactive transfer kernels at similar levels. Increasing the number of spectral intervals from 7 to 16 is found to produce only a marginal improvement in vertical resolution.

Conrath, B. J.↗

NASA NTRS1971

Application of holographic optical techniques to bulk memory.

Current efforts to exploit the spatial redundancy and built-in imaging of holographic optical techniques to provide high information densities without critical alignment and tight mechanical tolerances are reviewed. Read-write-erase in situ operation is possible but is presently impractical because of limitations in available recording media. As these are overcome, it should prove feasible to build holographic bulk memories with mechanically replaceable hologram plates featuring very fast (less than 2 microsec) random access to large (greater than 100 million bit) data blocks and very high throughput (greater than 500 Mbit/sec). Using volume holographic storage it may eventually be possible to realize random-access mass memories which require no mechanical motion and yet provide very high capacity.

Anderson, L. K.↗

NASA NTRS1971

Comments on the continuity of distribution functions obtained by superposition.

Assuming that Y is a nonnegative random variable independent of the differential process X(t), attention is given to the question of whether or not the superposition X(Y) can have a continuous probability distribution. If the process has continuous distributions, then the superposition is continuous if and only if P/Y = 0/ = 0. If the process has discontinuous distributions and no trend, then no superposition can have continuous distribution. If the process has discontinuous distributions and nonzero trend, then the superposition onto a random epoch has continuous distribution if and only if Y has continuous distribution.

Huff, B. W.↗

NASA NTRS1972

A simulation study exploring the effects of sensor spatial resolution on estimates of cloud cover from satellites.

Investigation of the effects of sensor spatial resolution on estimating the amount of clouds covering the earth by simulating various cloud distributions and sizes, and measuring the known cloud amount with resolution of different sizes using a cloud-no cloud threshold technique often applied in automatic data processing. Cloud amount statistics have been tabulated for a three-orders-of-magnitude range in the ratio (R) of areal cloud size to areal resolution size for seven cloud amounts between 6 and 90%. Three different cloud patterns were used. These were 1) a regularly spaced pattern of homogeneous dots arranged in rows and columns (to simulate cloud streets), 2) a randomly spaced pattern of the same dots (to simulate randomly oriented cumulus clouds), and 3) a heterogeneous cloud size distribution irregularly spaced (to simulate a view of different cloud types and sizes). Two cloud amount estimation techniques were tested. Cloud amounts of 100% (method 1) and 50% (method 2) were assigned to partially filled resolution elements. Using criteria applicable to some studies carried out in the past, it is shown that cloud amount estimations can be in error by as much as 86 and 38%, respectively, for the two methods. Nomograms have been developed which subtantially improve the estimate of the true cloud cover for R less than 100, provided that R can be determined.

Shenk, W. E.↗

NASA NTRS1972

Linear restoration of incoherently radiating objects.

Light from an incoherently radiating object and background light are focused onto a photosensitive mosaic, the currents from whose elements constitute the data on which is based a least-squares linear estimate of the radiance at points in the object. By comparison of the mean-square error with that given by Wiener filtering theory, the equivalent noise spectral density for use in the latter is shown to consist of a shot-noise term and a term due to the random fluctuations of the incoherent light; the former predominates under most circumstances. Turbulent distortion of the image after passage of the rays through a random-phase screen is also treated from this standpoint.

Helstrom, C. W.↗

NASA NTRS1972

Model for radon diffusion through the lunar regolith.

Description of a model for radon diffusion through the lunar regolith in which the atom migrates by random walk. The regolith is represented by a system of randomly oriented baffles in which the mean distance which the atom travels between two collisions takes on the role of a mean free path. The effective mean time between two collisions depends on two entities: the actual mean time-of-flight and the mean sticking time on grain surfaces for one collision. The latter depends strongly on the temperature and the heat of adsorption of radon on regolith materials. Both the mean free path as well as the heat of adsorption are either poorly known or unknown for the lunar regolith; hence these quantities are treated as free parameters. Because of the greatly different mean lifetimes against radioactive decay of Rn219, Rn220, and Rn222, the regolith acts as a powerful 'filter' for these species. Rn222 escape is significant (32%) even for a mean free path of 1 micron, a heat of adsorption of 7.0 kcal/mole and a regolith depth of 4 m. Calculations of radon escape from a 4 m thick regolith, using mean free paths of 1, 10, and 80 microns and heats of adsorption of 4.0, 5.2, and 7.0 kcal/mole show that the Rn222/Rn220 escape ratio can be as small as 7.7 and as large as, or larger than 47. The small value of 7.7 is of particular interest, because it is nearly equal to the escape ratio inferred by Turkevich et al. (1970) from their Surveyor 5 results.

Friesen, L. J.↗

NASA NTRS1972

Quiet-time electron increases - A measure of conditions in the outer solar system.

Discussion of a possible explanation for the increases in the intensity range of 3- to 12-MeV interplanetary electrons that McDonald et al. (1972) have labeled as 'quiet-time electron increases.' It is argued that the electrons in quiet-time increases are galactic in origin but that the observed increases are not the result of any variation in the modulation of these particles in the inner solar system. It is suggested instead that quiet-time increases may occur when more electrons than normal penetrate a modulating region that lies far beyond the orbit of the earth. The number of electrons penetrating this region may increase when field lines that have experienced an unusually large random walk in the photosphere are carried by the solar wind out to the region. As evidence of this increased random walk, it is shown that five solar rotations before most of the quiet-time increases occur there is an extended period when the amplitude of the diurnal anisotropy (measured by the Deep River neutron monitor) is relatively low. A delay time of five rotations implies that the proposed modulating region lies at about 30 AU from the sun if the average solar-wind speed is assumed to be constant at about 400 km/sec over this distance. The implications for the correlation between periods of low-amplitude diurnal anisotropy and quiet-time increases on interplanetary conditions out to about 30 AU and some possible models for the proposed modulating region are also considered.

Fisk, L. A.↗

NASA NTRS1972

Estimation of correlation functions by stochastic approximation.

Consideration of the autocorrelation function of a zero-mean stationary random process. The techniques are applicable to processes with nonzero mean provided the mean is estimated first and subtracted. Two recursive techniques are proposed, both of which are based on the method of stochastic approximation and assume a functional form for the correlation function that depends on a number of parameters that are recursively estimated from successive records. One technique uses a standard point estimator of the correlation function to provide estimates of the parameters that minimize the mean-square error between the point estimates and the parametric function. The other technique provides estimates of the parameters that maximize a likelihood function relating the parameters of the function to the random process. Examples are presented.

Habibi, A.↗

NASA NTRS1972

Estimation of automobile-driver describing function from highway tests using the double steering wheel

The automobile-driver describing function for lateral position control was estimated for three subjects from frequency response analysis of straight road test results. The measurement procedure employed an instrumented full size sedan with known steering response characteristics, and equipped with a lateral lane position measuring device based on video detection of white stripe lane markings. Forcing functions were inserted through a servo driven double steering wheel coupling the driver to the steering system proper. Random appearing, Gaussian, and transient time functions were used. The quasi-linear models fitted to the random appearing input frequency response characterized the driver as compensating for lateral position error in a proportional, derivative, and integral manner. Similar parameters were fitted to the Gabor transformed frequency response of the driver to transient functions. A fourth term corresponding to response to lateral acceleration was determined by matching the time response histories of the model to the experimental results. The time histories show evidence of pulse-like nonlinear behavior during extended response to step transients which appear as high frequency remnant power.

Delp, P.↗

NASA NTRS1972

Investigation of estimators of probability density functions

Four research projects are summarized which include: (1) the generation of random numbers on the IBM 360/44, (2) statistical tests used to check out random number generators, (3) Specht density estimators, and (4) use of estimators of probability density functions in analyzing large amounts of data.

Speed, F. M.↗

NASA NTRS1972

Lumped parameter analysis of a stringer reinforced plate excited by band limited noise

The maximum root-mean-square response of a square clamped plate, subjected to a stationary random excitation, was determined both theoretically and empirically. For the tests, a 40 x 40 x 1/4 aluminum sheet was milled out to provide a thin waffle plate with 9 panels. The plate was acoustically excited, with the frequency range limited between 25 Hz and 500 Hz. The root-mean-square power of the random excitations, 149 decibels, was nearly constant for all natural frequencies of the plate system. Strain gage readings at 14 points were plotted as power spectral densities and root-mean-square displacements. A modal damping ratio matrix was determined from the response curves. Damping ratios were found to be a function of frequency, but not of location on the plate. For comparisons with the theoretical response, the plate was subdivided into 14 modes and anlayzed as a damped, lumped parameter system by use of an approximate normal-mode method. This method gave the best predictions of the power spectral densities for the lower frequencies. That prediction errors increased for the higher frequencies is attributed to improper assumptions for mass distribution and the insufficient number of lumped mass points.

Bilyeu, D. J.↗

NASA NTRS1972

The ALOHA SYSTEM

The report provides a status report and description of THE ALOHA SYSTEM research project at the University of Hawaii. THE ALOHA SYSTEM involves the analysis and construction of advanced methods of random access communications in large computer-communication systems. The existing ALOHA SYSTEM computer-communication network uses two 24,000 baud channels in the UHF band. The system employs message switching techniques similar to those of the ARPANET, in conjunction with a novel form of random access radio channel multiplexing. By means of these techniques the system has the capacity to accommodate several hundred active users of alphanumeric consoles on the two channels available. Each of these users can transmit and receive at a peak data rate of 24,000 baud although the average data rate of the users must of course be considerably less.

Abramson, N.↗

NASA NTRS1972

Optical memory development. Volume 2: Gain-assisted holographic storage media

Thin deformable films were investigated for use as the storage medium in a holographic optical memory. The research was directed toward solving the problems of material fatigue, selective heat addressing, electrical charging of the film surface and charge patterning by light. A number of solutions to these problems were found but the main conclusion to be drawn from the work is that deformable media which employ heat in the recording process are not satisfactory for use in a high-speed random-access read/write holographic memory. They are, however, a viable approach in applications where either high speed or random-access is not required.

Gange, R. A.↗

NASA NTRS1973

Statistical error model for a solar electric propulsion thrust subsystem

The solar electric propulsion thrust subsystem statistical error model was developed as a tool for investigating the effects of thrust subsystem parameter uncertainties on navigation accuracy. The model is currently being used to evaluate the impact of electric engine parameter uncertainties on navigation system performance for a baseline mission to Encke's Comet in the 1980s. The data given represent the next generation in statistical error modeling for low-thrust applications. Principal improvements include the representation of thrust uncertainties and random process modeling in terms of random parametric variations in the thrust vector process for a multi-engine configuration.

Bantell, M. H.↗