Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Nonlinear Raman forward scattering of a short laser pulse in a collisional transversely magnetized plasma

Nonlinear Raman forward scattering (NRFS) of an intense short laser pulse with a duration shorter than the plasma period through a homogenous collisional transversely magnetized plasma is investigated theoretically when ponderomotive, relativistic and collioninal nonlinearities are taken into account. The plasma is embedded in a uniform magnetic field perpendicular to both, the direction of propagation and electric vector of the radiation field. Nonlinear wave equation is set up and Fourier transformation method is used to solve the coupled equations describing NRFS instability. Finally, the growth rate of this instability is obtained. Thermal effects of plasma electrons and effect of the electron-ion collisions are examined. It is found that the growth rate of Raman forward scattering first decreases on increasing electron thermal velocity, minimizes at an optimum value, and then increases. Our results also show that the growth rate increases by increasing the electron-ion collisions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved optical and electrical properties of 200 MeV Ag{sup 15+} irradiated 3 wt% 'Li' doped MoO{sub 3} thin film

The lithium (3 wt%) doped MoO{sub 3} thin film was prepared by spray deposition onto ITO substrate at 325 Degree-Sign C. The film of thickness 577 nm was irradiated with 200 MeV Ag{sup 15+} ion beams at a fluence of 5 Multiplication-Sign 10{sup 12} ions/cm{sup 2}. The XRD pattern confirmed that the pristine film is polycrystalline with orthorhombic symmetry. Upon irradiation, the film turned amorphous. The sharp Raman peak in pristine film at 993 cm{sup -1} is due to the terminal oxygen of {alpha}-MoO{sub 3} phase. Optical transparency of the film increased upon irradiation. Large red shift was observed in both direct and indirect band gaps. Electrical transport property study shows that the carrier concentration increased by one order for the irradiated film.

36 MATERIALS SCIENCE↗

Crystalline silicon growth in nickel/a-silicon bilayer

The effect of substrate temperature on amorphous Silicon crystallization, mediated by metal impurity is reported. Bilayers of Ni(200nm)/Si(400nm) are deposited on fused silica substrate by electron beam evaporator at 200 and 500 Degree-Sign C. Raman mapping shows that, 2 to 5 micron size crystalline silicon clusters are distributed over the entire surface of the sample. X-ray diffraction and X-ray absorption spectroscopy studies demonstrate silicon crystallizes over the metal silicide seeds and grow with the annealing temperature.

36 MATERIALS SCIENCE↗

Raman and AFM study of gamma irradiated plastic bottle sheets

In this investigation, the effects of gamma irradiation on the structural properties of plastic bottle sheet are studied. The Plastic sheets were exposed with 1.25MeV {sup 60}Co gamma rays source at various dose levels within the range from 0-670 kGy. The induced modifications were followed by micro-Raman and atomic force microscopy (AFM). The Raman spectrum shows the decrease in Raman intensity and formation of unsaturated bonds with an increase in the gamma dose. AFM image displays rough surface morphology after irradiation. The detailed Raman analysis of plastic bottle sheets is presented here, and the results are correlated with the AFM observations.

36 MATERIALS SCIENCE↗

Study of the fast photoswitching of spin crossover nanoparticles outside and inside their thermal hysteresis loop

We have studied the low spin to high spin phase transition induced by nanosecond laser pulses outside and within the thermal hysteresis loop of the [Fe(Htrz){sub 2} trz](BF{sub 4}){sub 2}-H{sub 2}O spin crossover nanoparticles. We demonstrate that, whatever the temperature of the compound, the photo-switching is achieved in less than 12.5 ns. Outside the hysteresis loop, the photo-induced high spin state remains up to 100 {mu}s and then relaxes. Within the thermal hysteresis loop, the photo-induced high spin state remains as long as the temperature of the sample is kept within the thermal loop. A Raman study indicates that the photo-switching can be completed using single laser pulse excitation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ambient condition laser writing of graphene structures on polycrystalline SiC thin film deposited on Si wafer

We report laser induced local conversion of polycrystalline SiC thin-films grown on Si wafers into multi-layer graphene, a process compatible with the Si based microelectronic technologies. The conversion can be achieved using a 532 nm CW laser with as little as 10 mW power, yielding {approx}1 {mu}m graphene discs without any mask. The conversion conditions are found to vary with the crystallinity of the film. More interestingly, the internal structure of the graphene disc, probed by Raman imaging, can be tuned with varying the film and illumination parameters, resembling either the fundamental or doughnut mode of a laser beam.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermoelectric properties of PbTe with encapsulated bismuth secondary phase

Lead Telluride (PbTe) with bismuth secondary phase embedded in the bulk has been prepared by matrix encapsulation technique. X-Ray Diffraction results indicated crystalline PbTe, while Rietveld analysis showed that Bi did not substitute at either Pb or Te site, which was further confirmed by Raman and X-Ray Photoelectron Spectroscopy. Scanning Electron Microscopy showed the expected presence of a secondary phase, while Energy Dispersive Spectroscopy results showed a slight deficiency of tellurium in the PbTe matrix, which might have occurred during synthesis due to higher vapor pressure of Te. Transmission Electron Microscopy results did not show any nanometer sized Bi phase. Seebeck coefficient (S) and electrical conductivity ({sigma}) were measured from room temperature to 725 K. A decrease in S and {sigma} with increasing Bi content showed an increased scattering of electrons from PbTe-Bi interfaces, along with a possible electron acceptor role of Bi secondary phase. An overall decrease in the power factor was thus observed. Thermal conductivity, measured from 400 K to 725 K, was smaller at starting temperature with increasing Bi concentration, and almost comparable to that of PbTe at higher temperatures, indicating a more important role of electrons as compared to phonons at PbTe-Bi interfaces. Still, a reasonable zT of 0.8 at 725 K was achieved for undoped PbTe, but no improvement was found for bismuth added samples with micrometer inclusions.

36 MATERIALS SCIENCE↗

Assessing thermal damage in silicon PN-junctions using Raman thermometry

Laser machining is frequently utilized in the manufacture of photovoltaics. A natural by-product of these fabrication processes, heat, not only serves as a means of material removal but also modifies the material in an extended region beyond that ideally intended for alteration. This modified region, termed the heat affected zone, is detrimental to performance and should therefore be minimized. While undoubtedly thermal in origin, it is unclear exactly how the thermal environment during laser machining correlates to changes in the PN-junction that reduce performance. In response, we combine in-situ Raman based thermometry measurements with post-event failure analysis to identify the physical mechanisms damaging the junction during laser machining. From this approach, damage is shown to initiate prior to melting and be driven primarily by the diffusion of dopants for fluences that do not induce ablation. Additionally, comparatively small regions of damage are shown to have a large impact on operation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of La substitution on structure and magnetic properties of sol-gel prepared BiFeO{sub 3}

Detailed Rietveld analysis of the room temperature (RT) x-ray diffraction data of La{sub x}Bi{sub 1-x}FeO{sub 3} (LBFO) ceramics (0 {<=} x {<=} 0.4) prepared by sol-gel route revealed that the system retains distorted rhombohedral R3c structure of parent compound BiFeO{sub 3} (BFO) for x {<=} 0.2 but transforms to orthorhombic Pbnm structure for x > 0.2. The fundamental 12 Raman modes of pure BFO (x = 0.0) are reduced to 10 modes for x = 0.2 and further reduced to 7 modes for x = 0.4, which is a clear indication of structural modification and symmetry changes brought about by La doping. The coercive field, H{sub C}, increases remarkably with an increase in La doping and x = 0.4 exhibits the highest H{sub C} (19.5 kOe at RT) reported so far in any rare earth doped BFO, which will have a great potential for practical application in non-volatile memory devices. Moreover, high-field magnetization and remanence, M{sub r}, increase linearly with La doping content due to the gradual change in spin cycloid structure. M(T) curve shows an anomaly at 50 K, similar to that expected in a spin glass system. The Neel temperature (T{sub N}) of the LBFO increases with x, approaching that of the LaFeO{sub 3}.

36 MATERIALS SCIENCE↗

Studies of photoconductivity and field effect transistor behavior in examining drift mobility, surface depletion, and transient effects in Si-doped GaN nanowires in vacuum and air

Variable intensity photoconductivity (PC) performed under vacuum at 325 nm was used to estimate drift mobility ({mu}) and density ({sigma}{sub s}) of negative surface charge for c-axis oriented Si-doped GaN nanowires (NWs). In this approach, we assumed that {sigma}{sub s} was responsible for the equilibrium surface band bending ( Empty-Set ) and surface depletion in the absence of illumination. The NWs were grown by molecular beam epitaxy to a length of approximately 10 {mu}m and exhibited negligible taper. The free carrier concentration (N) was separately measured using Raman scattering which yielded N = (2.5 {+-} 0.3) Multiplication-Sign 10{sup 17} cm{sup -3} for the growth batch studied under 325 nm excitation. Saturation of the PC was interpreted as a flatband condition whereby Empty-Set was eliminated via the injection of photogenerated holes. Measurements of dark and saturated photocurrents, N, NW dimensions, and dimensional uncertainties, were used as input to a temperature-dependent cylindrical Poisson equation based model, yielding {sigma}{sub s} in the range of (3.5 to 7.5) Multiplication-Sign 10{sup 11} cm{sup -2} and {mu} in the range of (850 to 2100) cm{sup 2}/(V s) across the (75 to 194) nm span of individual NW diameters examined. Data illustrating the spectral dependence and polarization dependence of the PC are also presented. Back-gating these devices, and devices from other growth batches, as field effect transistors (FETs) was found to not be a reliable means to estimate transport parameters (e.g., {mu} and {sigma}{sub s}) due to long-term current drift. The current drift was ascribed to screening of the FET back gate by injected positive charge. We describe how these gate charging effects can be exploited as a means to hasten the otherwise long recovery time of NW devices used as photoconductive detectors. Additionally, we present data illustrating comparative drift effects under vacuum, room air, and dry air for both back-gated NW FETs and top-gated NW MESFETs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of purity, edge length, and growth area on field emission of multi-walled carbon nanotube emitter arrays

Present report aims to study the effect of purity, edge length, and growth area on field emission of patterned carbon nanotube (CNT) emitter arrays. For development of four CNT emitter arrays (CEAs), low resistively silicon substrates were coated with thin film of iron catalyst using photolithography, sputtering, and lift off process. Four CEAs were synthesized on these substrates using thermal chemical vapor deposition with minor changes in pretreatment duration. Out of these, two CEAs have 10 {mu}m Multiplication-Sign 10 {mu}m and 40 {mu}m Multiplication-Sign 40 {mu}m solid square dots of CNTs with constant 20 {mu}m inter-dot separation. Other two CEAs have ring square bundles of CNTs and these CEAs are envisioned as 10 {mu}m Multiplication-Sign 10 {mu}m square dots with 4 {mu}m Multiplication-Sign 4 {mu}m scooped out area and 15 {mu}m Multiplication-Sign 15 {mu}m square dots with 5 {mu}m Multiplication-Sign 5 {mu}m lift out area with constant 20 {mu}m inter-dot spacing. Solid square dot structures have exactly constant edge length per unit area with more than four-fold difference in CNT growth area however ring square dot patterns have minor difference in edge length per unit area with approximately two times difference in CNT growth area. Quality and morphology of synthesized CEAs were assessed by scanning electron microscope and Raman characterization which confirm major differences. Field emission of all CEAs was carried out under same vacuum condition and constant inter-electrode separation. Field emission of solid square dot CEAs show approximately identical current density-electric field curves and Fowler-Nordheim plots with little difference in emission current density at same electric field. Similar results were observed for ring square structure CEAs when compared separately. Maximum emission current density observed from these four CEAs reduces from 14.53, 12.23, 11.01, to 8.66 mA/cm{sup 2} at a constant electric field of 5 V/{mu}m, according to edge length of 1361.7, 1221.08, 872.20, to 872.16 mm rather than growth area and purity. Although, the 40 {mu}m Multiplication-Sign 40 {mu}m CEAs possessed highest CNT growth area of 8.7 mm{sup 2} and best purity defined in terms of lowest defect band to graphitic band ratio of 0.614, the current observed from this CEAs was least.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Counting molecular-beam grown graphene layers

We have used the ratio of the integrated intensity of graphene's Raman G peak to that of the silicon substrate's first-order optical phonon peak, accurately to determine the number of graphene layers across our molecular-beam (MB) grown graphene films. We find that these results agree well both, with those from our own exfoliated single and few-layer graphene flakes, and with the results of Koh et al.[ACS Nano 5, 269 (2011)]. We hence distinguish regions of single-, bi-, tri-, four-layer, etc., graphene, consecutively, as we scan coarsely across our MB-grown graphene. This is the first, but crucial, step to being able to grow, by such molecular-beam-techniques, a specified number of large-area graphene layers, to order.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ion beam analysis in cultural heritage studies: Milestones and perspectives

For three decades, ion beam analysis (IBA) in external mode was considered as the best choice for the characterisation of cultural heritage materials, as it combines excellent analytical performance and non-invasive character. However, in recent years, other analytical techniques arose as serious competitors, such as those based on synchrotron radiation (X-ray absorption, fluorescence or diffraction) or those using portable instruments (XRF, micro-Raman). It is shown that nevertheless IBA remains unmatched thanks to two unique features, namely the analysis of light elements and the high-resolution 3D chemical imaging.

36 MATERIALS SCIENCE↗

Low-damage high-throughput grazing-angle sputter deposition on graphene

Despite the prevalence of sputter deposition in the microelectronics industry, it has seen very limited applications for graphene electronics. In this letter, we report systematic investigation of the sputtering induced damages in graphene and identify the energetic sputtering gas neutrals as the primary cause of graphene disorder. We further demonstrate a grazing-incidence sputtering configuration that strongly suppresses fast neutral bombardment and retains graphene structure integrity, creating considerably lower damage than electron-beam evaporation. Such sputtering technique yields fully covered, smooth thin dielectric films, highlighting its potential for contact metals, gate oxides, and tunnel barriers fabrication in graphene device applications.

36 MATERIALS SCIENCE↗

In situ Raman monitoring of He{sup 2+} irradiation induced damage in a UO{sub 2} ceramic

The in situ Raman probing of a UO{sub 2} ceramic in [Ar/H{sub 2}, 95/5] gas atmosphere followed by exposure to He{sup 2+} ionic irradiation coming from a cyclotron accelerator was implemented. It was observed that the growth of Raman defect bands exhibits a unique kinetic nicely modelized by a simple direct impact model, and with an annealing rate constant of 5.6 × 10{sup −4} ± 4 × 10{sup −5} s{sup −1} for an ionic flow of 50 nA and an ions-beam induced sample heating of 170 ± 10 °C. Also, it was observed that the Ar plasma induced by the ions-beam is a sensitive probe of the presence of the ions-beam.

36 MATERIALS SCIENCE↗

The effect of electron induced hydrogenation of graphene on its electrical transport properties

We report a deterioration of the electrical transport properties of a graphene field effect transistor due to energetic electron irradiation on a stack of Poly Methyl Methacrylate (PMMA) on graphene (PMMA/graphene bilayer). Prior to electron irradiation, we observed that the PMMA layer on graphene does not deteriorate the carrier transport of graphene but improves its electrical properties instead. As a result of the electron irradiation on the PMMA/graphene bilayer, the Raman “D” band appears after removal of PMMA. We argue that the degradation of the transport behavior originates from the binding of hydrogen generated during the PMMA backbone secession process.

36 MATERIALS SCIENCE↗

Investigation of the effect of low energy ion beam irradiation on mono-layer graphene

In this paper, the effect of low energy irradiation on mono-layer graphene was studied. Mono-layer graphene films were irradiated with B, N and F ions at different energy and fluence. X-ray photoelectron spectroscopy indicates that foreign ions implanted at ion energies below 35 eV could dope into the graphene lattice and form new chemical bonds with carbon atoms. The results of Raman measurement indicate that ion beam irradiation causes defects and disorder to the graphene crystal structure, and the level of defects increases with increasing of ion energy and fluence. Surface morphology images also prove that ion beam irradiation creates damages to graphene film. The experiment results suggest that low-energy irradiation with energies of about 30 eV and fluences up to 5·10{sup 14} cm{sup −2} could realize small amount of doping, while introducing weak damage to graphene. Low energy ion beam irradiation, provides a promising approach for controlled doping of graphene.

36 MATERIALS SCIENCE↗

Magnetic properties of Mn{sub 3}O{sub 4} film under compressive stress grown on MgAl{sub 2}O{sub 4} (001) by molecular beam epitaxy

High quality single-crystalline Mn{sub 3}O{sub 4} thin films were grown on MgAl{sub 2}O{sub 4} (001) substrates by plasma-assisted molecular beam epitaxy. It is found that the films are compressed in the (001) plane and elongated in the perpendicular direction via in-situ reflection high-energy electron diffraction and ex-situ X-ray diffraction, which is confirmed by frequency hardening of relevant Raman bands. Different from the bulk, the epitaxial film with a thickness of 65 nm shows more obvious magnetic anisotropy and higher magnetic phase transition temperatures (T{sub N} = 50 K, T{sub 1} = 40.5 K, and T{sub 2} = 36 K) than that of the bulk (T{sub N} = 42 K, T{sub 1} = 39 K, and T{sub 2} = 33 K). The variation of magnetic properties could be attributed to the changes of interplay among spin, orbital, and lattice degrees of freedom owing to the residual strain in the epitaxial film.

36 MATERIALS SCIENCE↗