Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Regional-scale flows in mountainous terrain. Part 1: A numerical and observational comparison

This study uses observed data and a numerical simulation to examine the generation of thermally driven flows across the Colorado mountain barrier on meso-beta to meso-alpha scales. The observations were collected from remote surface observing systems at exposed mountaintop locations throughout the state of Colorado, over the summers of 1984-88, as part of the Rocky Mountain Peaks Experiment (ROMPEX). The data show the development of a recurrent circulation system across the Colorado mountain barrier, operating on a diurnal timescale. From the observations, the basic structure of the flow system appears as a daytime inflow toward the highest terrain, and a nocturnal outflow away from it. However, when examined in detail, the flow system exhibits more unusual behavior, especially west of the barrier crest. Here, winds in the early evening are occasionally observed to onset abruptly from an easterly direction, generally counter to the upper-level winds. Observations from ROMPEX for 26 August 1985 are used to provide comparison data for a numerical simulation with the Regional Atmospheric Modeling System (RAMS). This three-dimensional case study experiment is initialized with data from the National Meteorological Center and incorporates two-way interactive grid nesting. From the observed data and case study simulation, four distinct phases of the regional-scale circulation system have been identified. In the development phase, a deep mountain-plains solenoid is generated through terrain heating along the Front Range. This circulation system transforms in the late afternoon transition phase into a westward-propagating density current (WPDC). The third phase, called the 'density-current propagation phase,' occurs as the WPDC moves westward across the mountains, leaving in its wake strong southeasterly flow at the mountaintop level. This current appears to be the cause of the peculiar easterly component winds found in the ROMPEX mountaintop observations along the western slope. In the final late-night adjustment phase, the WPDC dissipates near the western edge of the Colorado mountains and steady southerly flow evolves over the high mountain terrain. This southerly flow is the steady response to the differential heating that develops between the low-lying plains and the intermountain region.

Bossert, James E.↗

The behavior of fragments of comet Shoemaker-Levy 9 in the atmosphere of Jupiter

Studies of the entry of fragments of comet Shoemaker-Levy 9 into the atmosphere of Jupiter give conflicting predictions as to whether or not most of the energy is deposited above the clouds. Using analytical models, we find that for a typical fragment radius of 1.5 km, both deceleration and mass loss (ablation) are negligible above the 1 bar level, so most of the energy will be deposited below the clouds, where radiation is blocked from escaping. The bulk of the energy produced by entering fragments will be observable only if the energy deposited below the clouds is transported above the clouds by means other than radiation. We provide new calculations of the flattening of fragments by ram pressure, of radiation-driven evaporative ablation and of ablation of droplets formed by Kelvin-Helmholtz instability.

Field, G. B.↗

ROSAT observations of the unusual supernova remnant CTB 80 containing the pulsar PSR 1951 + 32

The unusal supernova remnant CTB, 80 containing the 39.5 ms pulsar PSR 1951 + 32, has been observed with the Position Sensitive Proportional Counter (PSPC) and the High Resolution Imager (HRI) aboard ROSAT. The HRI image, centered on the pulsar, is composed of a bright compact core of approximately 1 arcminute radius containing the pulsar and a compact nebula, as well as a diffuse nebula extending approximately 5 arcminutes eastward of the pulsar. The PSPC allowed us to model the spectra of the point source, the compact nebula and the 5 arcminute diffuse nebula. For a power-law spectrum with photon index Gamma approximately 2 and an interstellar column density of N(sub H) approximately 3 x 10(exp 21)/cm(exp 21) the derived luminosities are approximately 2.3 x 10(exp 33) d(sub 2.5)(exp 2) ergs/s from the pointlike source, approximately 3.9 x 10(exp 33) d(sup 2.5)(exp 2) ergs/s from the compact nebula, and approximately 1.8 x 10(exp 33) d(sub 2.5)(exp 2) ergs/s from the 5 arcminutes diffuse nebula. In addition, the 2 deg diameter circular field of view of the PSPC reveals a hard emission feature southeast of the pulsar with a conical geometry extending out to the edge of the detector. The spectrum from this region is well described by a two-temperature Raymond-Smith thermal plasma with an average temperature of approximately 10(exp 7) K and a luminosity of approximately 10(exp 34)d(sub 2.5)(exp 2) ergs/s. Pulsations from the 39.5 ms puslar, PSR 1951 + 32, are detected at the 99% confidence level. The implied pulsed fration is approximately 35% with a complicated energy-dependent behavior. The compact core and the extended diffuse nebula can be explained as synchrotron radiation from the relativistic pulsar wind confined by the ram pressure of the surrounding inhomgeneous medium. The conelike feature detected southeast of PSR 1951 + 32 is consistent with emission from an optically thin SNR in the radiative cooling phase of its evolution.

Safi-Harb, Samar↗

Ion injection and acceleration at quasi-perpendicular shocks

We present and discuss results of a new model for ion injections and acceleration at quasi-perpendicular collisionless shocks. We use the one-dimensional hybrid simulation (kinetic ions/fluid electrons) and impose an assumption on the ion motion so that diffusion across the magnetic field (normal to the shock front) is possible. These motions are otherwise suppressed by both one- and two-dimensional simulations. We find that, even in strictly perpendicular shocks, when scattering normal to the field is included, a fraction of the incident ions are accelerated to suprathermal energies. When reasonable scattering times are considered, only pickup ions are injected, whereas thermal solar wind ions are not. The acceleration of these ions is very rapid. We have found that a few of the initially low-energy pickup ions can reach many tens to a few hundred times the plasma ramming energy in less than 100 gyroperiods. Furthermore, highly field aligned energetic ions are found to exist upstream of the slightly oblique shock. The most direct applications of this study is toward the interpretation of observations of both solar wind and interstellar pickup ion distributions in the vicinity of interplanetary shocks which are most often quasi-perpendicular. This work also directly addresses a fundamental issue with regard to our current understanding of the anomalous component of cosmic rays.

Giacalone, J.↗

Electron plasma environment at comet Grigg-Skjellerup: General observations and comparison with the environment at comet Halley

The three-dimensional electron spectrometer of the Reme plasma analyzer-complete positive ion, electron and ram negative ion measurements near comet Halley (RPA-COPERNIC) experiment aboard the Giotto spacecraft, although damaged during the comet Halley encounter in March 1986, has provided very new results during the encounter on July 10, 1992, with the weakly active comet Grigg-Skjellerup (G-S). The main characteristic features of the highly structured interaction region extending from approximately 26,500 km inbound to approximately 37,200 km outbound are presented. These results are compared to the results obtained by the same instrument during the Giotto comet Halley fly-by. Despite the large difference in the size of the interaction regions (approximately 60,000 km for G-S, approximately 2000,000 km for Halley) due to 2 orders of magnitude difference in cometary neutral gas production rate, there are striking similarities in the solar wind interactions with the two comets.

Reme, H.↗

Collapse and fragmentation of molecular cloud cores. 2: Collapse induced by stellar shock waves

The standard scenario for low-mass star formation involves 'inside-out' collapse of a dense molecular cloud core following loss of magnetic field support through ambipolar diffusion. However, isotopic anomalies in presolar grains and meteoritical inclusions imply that the collapse of the presolar cloud may have been triggered by a stellar shock wave. This paper explores 'outside-in' collapse, that is, protostellar collapse initiated directly by the compression of quiescent dense cloud cores impacted by relatively slow stellar shock waves. A second-order accurate, gravitational hydrodynamics code has been used to study both the spherically symmetrical and three-dimensional evolution of initially centrally condensed, isothermal, self-gravitating, solar-mass cloud cores that are struck by stellar shock waves with velocities up to 25 km/s and postshock temperatures of 10 to 10,000 K. The models show that such mild shock waves do not completely shred and destroy the cloud, and that the dynamical ram pressure can compress the cloud to the verge of self-gravitational collapse. However, compression caused by a high postshock temperature is a considerably more effective means of inducing collapse. Shock-induced collapse produces high initial mass accretion rates (greater than 10(exp -4) solar mass/yr in a solar-mass cloud) that decline rapidly to much lower values, depending on the presence (approximately 10(exp -6) solar mass/yr) or absence (approximately 10(exp -8) to 10(exp -7) solar mass/yr) of an infinite reservoir of mass. Stellar mass accretion rates approximately 10(exp -7) solar mass/yr have been previously inferred from the luminosities of T Tauri stars; balanced mass accretion (stellar rate = envelope rate) at approximately 10(exp -7) solar mass/yr could then be possible if accretion occurs from a finite mass reservoir. Fluid tracers are used to determine what fraction of the stellar shock material is incorporated into the resulting protostellar object and disk; roughly half the impinging material is injected into the collapsing cloud core when there is a high postshock temperature. The models are consistent with a scenario where an AGB star wind triggered the collapse of the presolar cloud while injecting about 0.01 solar mass of matter derived from the AGB star envelope, as has been separately inferred on the basis of nucleosynthesis calculations.

Boss, Alan P.↗

Nightside electron flux measurements at Mars by the Phobos-2 HARP instrument

All the available nightside electron data obtained during circular orbits at Mars from the Phobos-2 Hyperbolic Retarded Potential Analyzer (HARP) instrument have been examined in detail and are summarized in this paper. An electron flux component with energies exceeding that of the unperturbed solar wind was observed inside the magnetosheath, indicating the presence of acceleration mechanism(s). The character of the electron fluxes measured in the magnetotail cannot be classified in any simple manner, however, there is a correlation between the electron fluxes measured well inside this region and the unperturbed solar wind ram pressure.

Shutte, N.↗

Excitation of the low lying vibrational levels of H2O by O(3P) as measured on Spacelab 2

The data from the infrared telescope (IRT), which was flown on space shuttle Challenger Spacelab 2 mission (July 1985), were originally reported by Koch et al. (1987) as originating from near orbital emissions, primarily H2O. In this study, analysis of this data was extended to determine the collisional cross sections for the excitation of the low lying vibrational levels of H2O, present in the orbiter cloud, by atmospheric O(3P). The evaluation of the contribution to the measured signal from solar excitation and ram O excitation of outgassing H2O permits the determination of the H2O column density and the excitation cross section of the (101) level at an O(3P) velocity of approximately 7.75 km/s. Contributions to the radiation in the 1.7-3.0 micron band by transitions from the (100), (001), and multiquantum excited levels are discussed. The findings of the study are (1) the IRT data for the 4.5-9.5 micron and the nighttime data for the 1.7-3.0 micron sensors are consistent with being explained by collision excitation of H2O by O(3P), (2) diurnal variations of 4.5-9.5 micron intensities follow the model predicted O density for a full orbit, (3) daytime increases in the H2O cloud density were not evident, (4) the cross sections for the collisional excitation process are derived and compared to values computated by Johnson (1986) and Redmon et al. (1986), (5) theoretical investigation suggests greater than 60% of the radiation from H2O is a result of multiphoton emission resulting from collisional multiquanta excitation, and (6) the large daytime increase in the 1.7-3.0 micron intensity data suggests that O(+) may likely be instrumental in producing excited H2O(+) through charge exchange.

Meyerott, R. E.↗

Diffuse hot gas in the NGC 4261 group of galaxies

We have found diffuse X-ray gas in the group of galaxies containing the elliptical galaxy NGC 4261. This galaxy along with its associated companions are behind the Virgo cluster in the W-cloud. A recent analysis of the velocity structure in the Virgo region indicates that the W-cloud has approximately 30 members, most of which are low luminosity dwarfs. The hot X-ray emitting gas is centered about halfway between NGC 4261 and NGC 4264 and extends out to a radius of approximately 40 min(620 kpc). The spectral data for the diffuse component are well fitted with a Raymond-Smith plasma model with a temperature of 0.85(sup +0.21)(sub -0.16) keV and abundance less than 0.08 times the solar value. Under the assumption that the diffuse gas is in hydrostatic equilibrium the total mass within 40 min is 1.9 x 10(exp 13) solar mass. We estimate that the total baryonic mass of the hot gas and the galaxies is 20%-34% of the total mass in the central 40 min radius of this group. This group of galaxies contains NGC 4273 which exhibits a 'bow shock' morphology similar to that of NGC 2276. This is thought to occur when the ram pressure from the intragroup gas significantly perturbs the interstellar medium in a late-type galaxy. We show that this is unlikely in this group.

Davis, David S.↗

Computing Fluxes Of Molecules On And Near A Spacecraft

Molecular Flux (MOLFLUX) computer code versatile program used to compute following environmental effects induced by spacecraft: fluxes of molecules to, and deposition of molecules on, surfaces; densities and column densities of molecules in surrounding space, and return fluxes of molecules to surfaces caused by both collisions of molecules with ambient atmosphere and by self-scattering. Includes capability to predict buildup in density of ambient gas in front of surfaces exposed to ram conditions by specifying ambient flux rates for all species impinging on surfaces. Surface chemical reactions represented as rates of emission from surfaces. User has option to modify spacecraft configurations and sources of contamination, and to choose which critical surfaces to examine. Written in FORTRAN and C language.

Ehlers, H. K.↗

Garnet Random-Access Memory

Random-access memory (RAM) devices of proposed type exploit magneto-optical properties of magnetic garnets exhibiting perpendicular anisotropy. Magnetic writing and optical readout used. Provides nonvolatile storage and resists damage by ionizing radiation. Because of basic architecture and pinout requirements, most likely useful as small-capacity memory devices.

Katti, Romney R.↗

The relation between FIR and H I emission in galaxies

This project explored the relationship between the global far-infrared and neutral hydrogen (H I) emission from galaxies, based on data from the Infrared Astronomy Satellite (IRAS) and published radio data. 100 and 60 micron IRAS fluxes were used to establish a temperature corrected measure of the cold dust emission, and H I fluxes were drawn from the literature with the greatest possible consistency. The degree of correlation between the FIR and H I fluxes was found to be better than in previous studies, comparable to the correlation previously found between FIR and CO fluxes. The improvement was obtained largely by (1) separating 'stripped' from 'unstripped' galaxies, and (2) using compatible sources of H I data. Stripping occurs in clusters of galaxies and is probably caused by ram-pressure effects as a galaxy travels through the intergalactic medium. Our results suggest that stripped galaxies have had their outer-disk gas removed (approximately 80% of their total H I) while retaining most of their 100-micron-emitting dust. This strongly shifts the ratio of their 100-micron-to-H I fluxes. The second problem, arising from diverse sources of data, arises because differing telescopes and observational techniques give rise to substantial disagreement in the measured H I flux, and this degrades the correlation of the FIR and H I fluxes.

Schneider, Stephen E.↗

Aspirating Seal Development: Analytical Modeling and Seal Test Rig

This effort is to develop large diameter (22 - 36 inch) Aspirating Seals for application in aircraft engines. Stein Seal Co. will be fabricating the 36-inch seal(s) for testing. GE's task is to establish a thorough understanding of the operation of Aspirating Seals through analytical modeling and full-scale testing. The two primary objectives of this project are to develop the analytical models of the aspirating seal system, to upgrade using GE's funds, GE's 50-inch seal test rig for testing the Aspirating Seal (back-to-back with a corresponding brush seal), test the aspirating seal(s) for seal closure, tracking and maneuver transients (tilt) at operating pressures and temperatures, and validate the analytical model. The objective of the analytical model development is to evaluate the transient and steady-state dynamic performance characteristics of the seal designed by Stein. The transient dynamic model uses a multi-body system approach: the Stator, Seal face and the rotor are treated as individual bodies with relative degrees of freedom. Initially, the thirty-six springs are represented as a single one trying to keep open the aspirating face. Stops (Contact elements) are provided between the stator and the seal (to compensate the preload in the fully-open position) and between the rotor face and Seal face (to detect rub). The secondary seal is considered as part of the stator. The film's load, damping and stiffness characteristics as functions of pressure and clearance are evaluated using a separate (NASA) code GFACE. Initially, a laminar flow theory is used. Special two-dimensional interpolation routines are written to establish exact film load and damping values at each integration time step. Additionally, other user-routines are written to read-in actual pressure, rpm, stator-growth and rotor growth data and, later, to transfer these as appropriate loads/motions in the system-dynamic model. The transient dynamic model evaluates the various motions, clearances and forces as the seals are subjected to different aircraft maneuvers: Windmilling restart; start-ground idle; ground idle-takeoff; takeoff-burst chop, etc. Results of this model show that the seal closes appropriately and does not ram into the rotor for all of the conditions analyzed. The rig upgrade design for testing Aspirating Seals has been completed. Long lead-time items (forgings, etc.) have been ordered.

Bharat Bagepalli↗

Evolution of the revolutionary blended-wing-body

The Blended-Wing-Body (BWB) airplane concept represents a potential revolution in subsonic transport efficiency for Very Large Airplanes (VLA's). NASA is sponsoring an advanced concept study to demonstrate feasibility and begin development of this new class of airplane. In this study, 800 passenger BWB and conventional configuration airplanes have been compared for a 7000 nautical mile design range, where both airplanes are based on technology keyed to 2015 entry into service. The BWB has been found to be superior to the conventional configuration in the following areas: Fuel Burn--31% lower, Takeoff Weight -- 1 3% lower, Operating Empty Weight -- 10% lower, Total Thrust -- 16% lower, and Lift/Drag --35% higher. The BWB advantage results from a double deck cabin that extends spanwise providing structural and aerodynamic overlap with the wing. This reduces the total wetted area of the airplane and allows a high aspect ratio to be achieved, since the deep and stiff centerbody provides efficient structural wingspan. Further synergy is realized through buried engines that ingest the wing's boundary layer, and thus reduce effective ram drag. Relaxed static stability allows optimal span loading, and an outboard leading-edge slat is the only high-lift system required.

Liebeck, Robert H.↗

Development of the SEASIS instrument for SEDSAT

Two SEASIS experiment objectives are key: take images that allow three axis attitude determination and take multi-spectral images of the earth. During the tether mission it is also desirable to capture images for the recoiling tether from the endmass perspective (which has never been observed). SEASIS must store all its imagery taken during the tether mission until the earth downlink can be established. SEASIS determines attitude with a panoramic camera and performs earth observation with a telephoto lens camera. Camera video is digitized, compressed, and stored in solid state memory. These objectives are addressed through the following architectural choices: (1) A camera system using a Panoramic Annular Lens (PAL). This lens has a 360 deg. azimuthal field of view by a +45 degree vertical field measured from a plan normal to the lens boresight axis. It has been shown in Mr. Mark Steadham's UAH M.S. thesis that his camera can determine three axis attitude anytime the earth and one other recognizable celestial object (for example, the sun) is in the field of view. This will be essentially all the time during tether deployment. (2) A second camera system using telephoto lens and filter wheel. The camera is a black and white standard video camera. The filters are chosen to cover the visible spectral bands of remote sensing interest. (3) A processor and mass memory arrangement linked to the cameras. Video signals from the cameras are digitized, compressed in the processor, and stored in a large static RAM bank. The processor is a multi-chip module consisting of a T800 Transputer and three Zoran floating point Digital Signal Processors. This processor module was supplied under ARPA contract by the Space Computer Corporation to demonstrate its use in space.

Maier, Mark W.↗

Low Frequency Waves in the Plasma Environment Around the Shuttle

As a part of the SAMPIE (The Solar Array Module Plasma Interaction Experiment) program, the Langmuir probe (LP) was employed to measure plasma characteristics during the flight of STS-62. The whole set of data could be divided into two parts: (1) low frequency sweeps to determine voltage-current characteristics and to find the electron temperature and number density; (2) high frequency turbulence (HFT) data caused by electromagnetic noise around the Shuttle. Broadband noise was observed at 250-20,000 Hz frequencies. Measurements were performed in ram conditions; thus, it seems reasonable to believe that the influence of spacecraft operations on plasma parameters was minimized. It is shown that ion acoustic waves were observed, and two kinds of instabilities are suggested for explanation of the origin of these waves. According to the purposes of SAMPIE, samples of solar cells were placed in the cargo bay of the Shuttle, and high negative bias voltages were applied to them to initiate arcing between these cells and the surrounding plasma. The arcing onset was registered by special counters, and data were obtained that included the amplitudes of current, duration of each arc, and the number of arcs per one experiment. The LP data were analyzed for two different situations: with arcing and without arcing. Electrostatic noise spectra for both situations and a theoretical explanation of the observed features are presented in this paper.

Vayner, Boris V.↗

Potential Flow Downstream of the Heliospheric Terminal Shock: A Non-Spherical Shock

We have solved for the potential flow downstream of the terminal shock of the solar wind in the limit of small departures from a spherical shock due to a latitudinal ram pressure variation in the supersonic solar wind. The solution connects anisotropic streamlines at the shock to uniform streamlines down the heliotail because we use a non-slip boundary condition on the heliopause at large radii. The rotational velocity about the heliotail in the near-field solution decays as the fourth power of distance from the shock. The polar divergence of the streamlines will have consequences for the previously discussed magnetic pressure ridge that may build-up just inside the heliopause.

Nerney, Steven↗

JANNAF Combustion Subcommittee Meeting

This volume, the first of four volumes, is a collection of 33 unclassified/unlimited papers which were presented at the 33rd Joint Army-Navy-NASA-Air Force (JANNAF) Combustion Subcommittee Meeting in conjunction with the Propulsion Systems Hazards at the Naval Postgraduate School, Monterey, CA. The JANNAF papers contained in this volume review airbreathing combustion measurement, performance and control; electrothermal-chemical gun experiment and modeling; liquid propellant gun experiment and modeling; solid propellant gun interior ballistics; formulation modeling and diagnostics, ignition, and gun barrel wear modeling, blast and flash; and ram, fastcore and gas generator gun propulsion concepts.

Fry, Ronald S.↗