Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIAL VELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Correlation between the relative blob fraction and plasma parameters in NSTX

Here, we present a simple analysis of the fraction of blobs observed in the scrape-off layer of NSTX and calculates the correlation between this blob fraction and various plasma parameters. The measurements were made using the gas puff imaging (GPI) diagnostic on a database of 103 shots from 2010 with neutral beam power P NBI = 0–6 MW. The blob fraction ranged from f b = 0.1% to 4.8%, where f b is defined as the fraction of time the GPI signal was larger than three times its average value within 0–7.5 cm outside the separatrix. The blob fraction generally decreased with increasing neutral beam injection power and was lower on average in H-mode plasmas than Ohmic and L-mode plasmas. The blob fraction had its highest correlation with the measured poloidal turbulence velocity and its radial gradient just inside the separatrix. This is in part consistent with a model in which the blob generation rate increases with the poloidal velocity shear.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1985

Tone excited jets. III - Flow measurements

This paper describes the effects of upstream excitation on the flow characteristics of tone-excited jet under static as well as simulated forward velocity conditions. The data presented include axial and radial distributions of mean velocities and turbulence intensities as functions of excitation conditions. Results for both unheated and heated jets are presented. The measured distributions of pressures associated with the large-scale turbulence are also presented for some test conditions.

Lepicovsky, J.↗
DOE OSTI2022

Rational surfaces, flows and radial structure in the TJ-II stellarator

Abstract In this work, we report on the results obtained by measuring several turbulent quantities well inside the plasma edge by means of a Langmuir probe during dynamical rotational transform scans in the TJ-II stellarator, while applying a radial electric field to the edge plasma using a biasing probe. By calculating the intermittence parameter from floating potential measurements, we are able to identify a major low order rational surface and hence relate the probe measurements to the local value of the rotational transform. Based on the former, we are able to show that the poloidal plasma velocity (and hence radial electric field) has a significant radial structure that is clearly related to the rotational transform profile and in particular the lowest order rational surfaces in the range studied. The poloidal velocity is also affected by the edge biasing. The particle flux Γ was also found to exhibit a radial pattern, as did the flow shear suppression term ω E × B , but the relation of the former to the low-order rational surfaces was less clear. We surmise that this lack of direct correspondence is due to an unknown term in the turbulence evolution equation: the instability growth rate, γ . We make use of a reduced Magnetohydrodynamic turbulence model to interpret the results. Overall, a picture is obtained in which the plasma self-organizes towards a state with a clear radial pattern of the radial electric field, in line with expectations from some numerical studies describing the spontaneous formation of an ‘ E × B staircase’, consisting of alternating layers with fast and slow radial transport. In this state, the radial profiles of various quantities (density, temperature, pressure) will not be smooth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1992

CN jet velocity in Comet P/Halley

The projected expansion velocity of Comet Halley's coma is presently determined in CN jet images that were processed with a radial profile subtraction technique. It is established that the flow is approximately radial, and that the velocity can also be determined by measuring specific radial features in jets. The largest projected velocity is 1.7 +/- 0.3 km/sec, at 50,000 km from the nucleus. This is the largest expansion velocity found for this region of the Comet Halley coma. Comparisons are made with other observations and theoretical models.

Klavetter, James J.↗
NASA NTRS1975

A search for solar wind velocity changes between 0.7 and 1 AU

Observations are presented concerning the radial variations of the solar wind velocity between 0.7 and 1 AU in late 1968 and early 1969. The observations were made with instruments carried by Pioneer 9 and the earth-orbiting satellite OGO 5. The Pioneer and OGO velocity measurements are compared. It is found that the same basic solar wind velocity structure was seen at both spacecraft. No statistically significant dependence of average velocity on the radial distance from the sun could be observed.

Intriligator, D. S.↗
NASA NTRS1982

LV measurements with an advanced turboprop

Nonintrusive measurements of velocity about a spinner-propeller-nacelle configuration were made at a Mach number of 0.8. A laser velocimeter (LV) specifically developed for these measurements was used to determine the flow field of the advanced swept SR-3 propeller. The data will be used to study the flow and to verify computer prediction codes. The usefulness of the LV data in detecting flow anomalies and to substantiate the data quality was demonstrated. Some typical results are given. Mach number profiles at the entrance of the propeller are compared with theoretical predictions. The LV data is in excellent agreement with the axisymmetric, compressible, inviscid theory (without blades) ahead of the propeller except near the hub. The data indicate blade blockage near the spinner. Blade to blade variations in axial velocity for four radial positions at the propeller exist are also given. The large apparent wake near the hub is associated with the hub choking. The blade to blade variation of axial velocity ahead of a shock within the blade passage is given.

Neumann, H. E.↗
DOE OSTI2026

Understanding Large-Scale Dynamos in Unstratified Rotating Shear Flows

For this work, we combine simulations with new analyses that overcome previous pitfalls to explicate how nonhelical mean-field dynamos grow and saturate in unstratified, magnetorotationally driven turbulence. Shear of the mean radial magnetic field amplifies the azimuthal component. Radial fields are regenerated by velocity fluctuations that induce shear of radial magnetic fluctuations, followed by Lorentz and Coriolis forces that source a negative off-diagonal component in the turbulent diffusivity tensor. We present a simple schematic to illustrate this dynamo growth. A different part of the Lorentz force forms a third-order correlator in the mean electromotive force that saturates the dynamo.

accretion disk & black-hole plasma↗
NASA NTRS2016

Coronal Magnetic Field Profiles from Shock-CME Standoff Distances

Coronagraphs observe coronal mass ejections (CMEs) and driven shocks in white light images.From these observations the shocks speed and the shocks standoff distance from the CMEs leading edge can be derived. Using these quantities, theoretical relationships between the shocks Alfvenic Mach number MA and standoff distance, and empirical radial profiles for the solar wind velocity and number density, the radial magnetic field profile upstream of the shock can be calculated. These profiles cannot be measured directly. We test the accuracy of this method for estimating the radial magnetic field profile upstream of the shock by simulating a sample CME that occurred on 29 November 2013 using the three-dimensional (3-D) magnetohydrodynamic Block-Adaptive-Tree-Solar wind-Roe-Upwind-Scheme code, retrieving shock-CME standoff distances from the simulation, and comparing the estimated and simulated radial magnetic field profiles. We find good agreement between the two profiles (within +/-30%) between 1.8 and 10R.Our simulations confirm that a linear relationship exists between the standoff distance and the inverse compression ratio at the shock. We also find very good agreement between the empirical and simulated radial profiles of the number density and speed of the solar wind and inner corona.

Schmidt, J. M.↗
NASA NTRS1988

The velocity structure and turbulence at the center of the Orion Nebula

Using the Coude Feed System of the Kitt Peak National Observatory at its highest possible dispersion and a CCD detector with wide dynamic range it was possible to examine in detail the radial and turbulent velocities of the Orion Nebula at the seeing limit. For the first time, multiple components of the spectral lines were resolved and the Gaussian profiles fit to them. Using four different observing runs, two circular areas 2 minutes in diameter were observed, the first centered on the theta sup 1 Orionis and the second centered on theta sup 2 Orionis. The velocity resolution of 1 km/s combined with the angular resolution of 2 seconds allowed observation in detail at line splitting as well as the location and measurement of high internal motions, about -50 km/s with respect to the bulk of ionized matter. Because over 900 different positions were measured, modern statistical techniques were used for the analysis of turbulence, so that the dispersion relation and the structure function could be calculated and compared with predictions of the Kolmogorov theory. The random motions showed correlation with spatial separation, as expected for turbulence; but comparison with predictions of the classical theory for nebular turbulence showed poor agreement. If Kolmogorov theory applies, then the energy must be input at many scales.

Castaneda, Hector O.↗
NASA NTRS1983

Further development of a method for computing three-dimensional subsonic viscous flows in turbofan lobe mixers

Procedure for computing subsonic, turbulent flow in turbofan lobe mixers was extended to allow consideration of flow fields in which a swirl component of velocity may be present. Additional, an optional k-lambda turbulence model was added to the procedure. The method of specifying the initial flow field was also modified, allowing parametric specification or radial secondary flow velocities, and making it possible to consider initial flow fields which have significant inlet secondary flow vorticity. A series of example calculations was performed which demonstrate the various capabilities of the modified code. These calculations demonstrate the effects of initial secondary flows of various magnitudes, the effects of swirl, and the effects of turbulence model on the mixing process. The results of these calculations indicate that the initial secondary flows, presumed to be generated within the lobes, play a dominant role in the mixing process, and that the predicted results are relatively insensitive to the turbulence model used.

Lin, S. J.↗
NASA NTRS1956

The Near Noise Field of Static Jets and Some Model Studies of Devices for Noise Reduction

An experimental study is presented of the pressure fluctuations near jet exhaust streams made during unchoked operation of a turbojet engine and a 1-inch-diameter high-temperature model jet and during choked operation of various sizes of model jets with unheated air. The tests for unchoked operation indicate a random spectrum of rather narrow band width which varies in frequency content with axial position along the jet. Pressure surveys from the model tests along lines parallel to the 15 degree jet boundary indicate that the station of greatest pressure fluctuations is determined by the jet velocity and the radial distance, with a tendency of the maximum to shift downstream as either parameter is increased. From model tests the magnitude of the fluctuations appears to increase as about the second power of jet velocity at points just outside the jet boundary and as increasingly higher powers of jet velocity as distance from the boundary is increased. A laboratory method of noise reduction with model jets was found to produce large decreases in the magnitude of the lower-frequency components of the spectra and thereby also to reduce the total radiated energy. Choked operation of model jets with unheated air indicates the appearance of a discrete-frequency component of very large magnitude. Shadowgraph records of the flow show that this condition is associated with the appearance of flow formations suggestive of partly formed toroidal vortices in the vicinity of the shocks. Elimination of these formations is found to eliminate the discrete component and thereby to reduce the overall noise level.

Lassiter, Leslie W↗
DOE OSTI2023

Moment-Fourier approach to ion parallel fluid closures and transport for a toroidally confined plasma

A general method of solving the drift kinetic equation is developed for an axisymmetric magnetic field. Expanding a distribution function in general moments, a set of ordinary differential equations is obtained. Successively expanding the moments and magnetic-field involved quantities in Fourier series, a set of linear algebraic equations is obtained. The set of full (Maxwellian and non-Maxwellian) moment equations is solved to express the first-order density, temperature, and flow velocity in terms of radial gradients of the zeroth-order pressure and temperature. Closure relations that connect parallel heat flux density and viscosity to the radial gradients and parallel gradients of temperature and flow velocity are also obtained by solving the non-Maxwellian moment equations. The closure relations combined with the linearized fluid equations reproduce the same solution obtained directly from the full moment equations. Furthermore, the method can be generalized to derive closures and transport for an electron-ion plasma and a multi-ion plasma in a general magnetic field.

neoclassical transport↗
DOE OSTI2026

The Velocity Field of Our Milky Way Outer Stellar Halo Based on DESI DR2

Using 64,000 halo K giants from the Dark Energy Spectroscopic Instrument second Data Release (DR2), we decompose the Milky Way (MW) stellar halo between 3 and 160 kpc into metal-rich (MR) and metal-poor (MP) components via a Gaussian mixture model. The two populations are nearly equal in number but chemically and kinematically distinct: MR stars occupy highly radial orbits with velocity anisotropy of β ≈ 0.94 and metallicity dispersion σ [Fe/H] ≈ 0.17 dex, without obvious dependence on distance, and are mainly contributed by Gaia-Sausage/Enceladus (GSE) debris. The MR component dominates the inner 30 kpc and reemerges beyond 50 kpc, implying GSE debris can extend to ∼70–80 kpc. MP stars exhibit a weaker radial bias of β ≈ 0.46, decreasing to −0.5 beyond 80 kpc, and with a larger metallicity dispersion of σ [Fe/H] ≈ 0.46 dex, showing signatures of multiple minor mergers. Both components exhibit net prograde rotation at ∼10–30 kpc with a stronger azimuthal signal in the MP population. The nonequilibrium motions of the outer halo (>50 kpc) are quantified with a dipole-plus-contraction velocity field. We find that the outer halo is simultaneously contracting (μ compr = −19 km s −1 , distance-independent) and subject to reflex motions (μ dipole increases from −19 to −44 km s −1 with radius), reflecting the perturbation from the Large Magellanic Cloud (LMC). We also confirm a linear dependence of mean polar velocity for the outer stellar halo on μ dipole , a direct consequence of the LMC and MW interaction. Our results provide a quantitative distance-resolved description of the MW’s last major accretion event and its ongoing response to the first infall of the LMC.

Li, Songting [Shanghai Jiao Tong University; Shang↗
DOE OSTI2022

Contribution of Gaia Sausage to the Galactic Stellar Halo Revealed by K Giants and Blue Horizontal Branch Stars from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope, Sloan Digital Sky Survey, and Gaia

We explore the contribution of the Gaia Sausage to the stellar halo of the Milky Way by making use of a Gaussian mixture model (GMM) and applying it to halo star samples of Large Sky Area Multi-Object Fiber Spectroscopic Telescope K giants, Sloan Extension for Galactic Understanding and Exploration K giants, and Sloan Digital Sky Survey blue horizontal branch stars. The GMM divides the stellar halo into two parts, of which one represents a more metal-rich and highly radially biased component associated with an ancient, head-on collision referred to as the Gaia Sausage, and the other one is a more metal-poor and isotropic halo. A symmetric bimodal Gaussian is used to describe the distribution of spherical velocity of the Gaia Sausage, and we find that the mean absolute radial velocity of the two lobes decreases with the Galactocentric radius. We find that the Gaia Sausage contributes about 41%–74% of the inner (Galactocentric radius r gc < 30 kpc) stellar halo. The fraction of stars of the Gaia Sausage starts to decline beyond r gc ~ 25–30 kpc, and the outer halo is found to be significantly less influenced by the Gaia Sausage than the inner halo. After the removal of halo substructures found by integrals of motion, the contribution of the Gaia Sausage falls slightly within r gc ~ 25 kpc but is still as high as 30%–63%. Finally, we select several possible Sausage-related substructures consisting of stars on highly eccentric orbits. The GMM/Sausage component agrees well with the selected substructure stars in their chemodynamical properties, which increases our confidence in the reliability of the GMM fits.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1984

Mesospheric measurements of irregularity patches using a 3-antenna interferometer, part 3.6B

Three events of mesospheric radar returns have been isolated to illustrate the potential of a three-antenna interferometer in the study of the neutral atmosphere. Contour plots of echo intensity and the presence of irregularities in isolated and well-defined regions are shown. These measurements were carried out using the SOUSY radar in the Harz mountains in Germany, on September 9, 1980. The system frequency is 53.5 MHz. Local time is 2 hours in advance of Universal time. The irregularities wavelength is 2.81 m and the three arms of the interferometer were sampled with 167 ms of time difference. To provide precise estimates of vertical velocities, the measured (radial) Doppler shift has to be corrected to subtract the contribution due to the horizontal motions. For near-vertical observations (zenith angle less than about 10 deg) it is readily shown that the rate of change of the measured phases are related to the velocities V sub eq, V sub ns (in the East-West and North-South directions).

Ierkic, H. M.↗
NASA NTRS1982

The motion and distribution of the vibrationally excited H2 in the Orion molecular cloud

Observations of the v=1-0 S(1) and S(0), and v=2-1 S(1) emission lines of H2 in the Orion molecular cloud are presented, showing that the emission region has an approximately circular symmetry, which may be divided into a central and a peripheral region. The emission lines in the central region have a large range of velocities, and predominantly occur at the negative velocities of 0 to -100 km/sec, while those at the periphery are symmetric. The brightness of the peak emission is generally higher at positions in the periphery than in the central region. These results lead to a model of H2 line emission in which there is gas undergoing radial expansion at velocities of up to about 100 km/sec within a region of some 2.5 x 10 to the 17th cm in diameter around the cluster of IR sources. A substantial part of the H2 line emission comes from the outside boundary of this expansion region, where the flow collides with the gas in the molecular cloud.

Nadeau, D.↗
NASA NTRS2003

Foreign Object Damage of Two Gas-Turbine Grade Silicon Nitrides in a Thin Disk Configuration

Foreign object damage (FOD) behavior of two commercial gas-turbine grade silicon nitrides, AS800 and SN282, was determined at ambient temperature through post-impact strength testing for thin disks impacted by steel-ball projectiles with a diameter of 1.59 mm in a velocity range from 115 to 440 m/s. AS800 silicon nitride exhibited a greater FOD resistance than SN282, primarily due to its greater value of fracture toughness (K(sub IC)). The critical impact velocity in which the corresponding post-impact strength yielded the lowest value was V(sub c) approx. 440 and 300 m/s for AS800 and SN282, respectively. A unique lower-strength regime was typified for both silicon nitrides depending on impact velocity, attributed to significant radial cracking. The damages generated by projectile impact were typically in the forms of ring, radial, and cone cracks with their severity and combination being dependent on impact velocity. Unlike thick (3 mm) flexure bar specimens used in the previous studies, thin (2 mm) disk target specimens exhibited a unique backside radial cracking occurring on the reverse side just beneath the impact sites at and above impact velocity of 160 and 220 m/s for SN282 and AS800, respectively.

Choi, Sung R.↗
NASA NTRS1977

Analytic studies of local-severe-storm observables by satellites

Attention is concentrated on the exceptionally violet whirlwind, often characterized by a fairly vertical axis of rotation. For a cylindrical polar coordinate system with axis coincident with the axis of rotation, the secondary flow involves the radial and axial velocity components. The thesis advanced is, first, that a violent whirlwind is characterized by swirl speeds relative to the axis of rotation on the order of 90 m/s, with 100 m/s being close to an upper bound. This estimate is based on interpretation of funnel-cloud shape (which also suggests properties of the radial profile of swirl, as well as the maximum magnitude); an error assessment of the funnel-cloud interpretation procedure is developed. Second, computation of ground-level pressure deficits achievable from typical tornado-spawning ambients by idealized thermohydrostatic processes suggests that a two-cell structure is required to sustain such large speeds.

Dergarabedian, P.↗