Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Periodicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Directional locking and hysteresis in stripe- and bubble-forming systems on one-dimensional periodic substrates with a rotating drive

We examine the dynamics of a two-dimensional stripe, bubble, and crystal forming system interacting with a periodic one-dimensional substrate under an applied drive that is rotated with respect to the substrate periodicity direction 𝑥. We find that the stripes remain strongly directionally locked to the 𝑥 direction for an extended range of drives before undergoing motion parallel to the drive. In some cases, the stripes break apart at the unlocking transition, but they can dynamically reform into stripes aligned perpendicular to the 𝑥 direction, producing hysteresis in the directional locking and unlocking transitions. In contrast, moving anisotropic crystal and bubble phases exhibit weaker directional locking and reduced or no hysteresis. The hysteresis occurs in regimes where the particle rearrangements occur and is most pronounced near the stripe phase. In conclusion, we also show that for varied substrate strength, substrate spacing, and particle density, a number of novel dynamical patterns can form that include a combination of stripe, bubble, and crystal morphologies.

36 MATERIALS SCIENCE↗

Double-Period Breathers in a Driven-Damped Lattice

Spatially localized and temporally oscillating solutions, known as discrete breathers, have been experimentally and theoretically discovered in many physical systems. Here, we consider a lattice of coupled damped and driven Helmholtz-Duffing oscillators in which we found a spatial coexistence of oscillating solutions with different frequencies. Specifically, we demonstrate that stable period-doubled solutions coexist with solutions oscillating at the frequency of the driving force. Such solutions represent period-doubled breathers resulting from a stability overlap between subharmonic and harmonic solutions and exist up to a certain strength of the lattice coupling. Our findings suggest that this phenomenon can occur in any driven lattice where the nonlinearity admits bistability (or multi-stability) of subharmonic and harmonic solutions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Discrete Time-Crystalline Order Enabled by Quantum Many-Body Scars: Entanglement Steering via Periodic Driving

The control of many-body quantum dynamics in complex systems is a key challenge in the quest to reliably produce and manipulate large-scale quantum entangled states. Recently, quench experiments in Rydberg atom arrays [Bluvstein et al. Science 371, 1355 (2021)] demonstrated that coherent revivals associated with quantum many-body scars can be stabilized by periodic driving, generating stable subharmonic responses over a wide parameter regime. We analyze a simple, related model where these phenomena originate from spatiotemporal ordering in an effective Floquet unitary, corresponding to discrete time-crystalline behavior in a prethermal regime. Unlike conventional discrete time crystals, the subharmonic response exists only for Néel-like initial states, associated with quantum scars. We predict robustness to perturbations and identify emergent timescales that could be observed in future experiments. Our results suggest a route to controlling entanglement in interacting quantum systems by combining periodic driving with many-body scars.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Boundary Modes from Periodic Magnetic and Pseudomagnetic Fields in Graphene

Single-layer graphene subject to periodic lateral strains is an artificial crystal that can support boundary spectra with an intrinsic polarity. This is analyzed by comparing the effects of periodic magnetic fields and strain-induced pseudomagnetic fields that, respectively, break and preserve time-reversal symmetry. In the former case, a Chern classification of the superlattice minibands with zero total magnetic flux enforces single counterpropagating modes traversing each bulk gap on opposite boundaries of a nanoribbon. For the pseudomagnetic field, pairs of counterpropagating modes migrate to the same boundary where they provide well-developed valley-helical transport channels on a single zigzag edge. Here, we discuss possible schemes for implementing this situation and their experimental signatures.

36 MATERIALS SCIENCE↗

Detecting Periodic Subsequences in Cyber Security Data

Anomaly detection for cyber-security defence has garnered much attention in recent years providing an orthogonal approach to traditional signature-based detection systems. Anomaly detection relies on building probability models ofnormal computer network behaviour and detecting deviations from the model. Most data sets used for cyber-security have a mix of user-driven events and automated network events, which most often appears as polling behaviour. Separating these automated events from those caused by human activity is essential to building good statistical models for anomaly detection. In this article, we present a change point detection framework for identifying automated network events appearing as periodic subsequences of event times. The opening event of each subsequence is interpreted as a human action which then generates an automated, periodic process. Difficulties arising from the presence of duplicate and missing data are addressed. The methodology is demonstrated using authentication data from Los Alamos National Laboratory's enterprise computer network.

97 MATHEMATICS AND COMPUTING↗

Feasibility of a short-period superconducting undulator using 2G HTS tapes.

This paper presents a design concept of a planar-type superconducting undulator (SCU) using YBCO high-temperature superconductor (HTS) tapes. The SCU has a period length of 15 mm, and the tape conductor has dimensions of 4-mm width and 0.1-mm thickness. It has been shown that the conductor transition from one coil groove to the one in the next period is possible by making a semi-circular concave loop of the tape for continuous winding in the same direction. Non-uniform current distribution in the tape may cause field quality degradation. Assuming a uniform current density in the tape, the engineering critical-current density of the HTS in the coil for the design and the corresponding achievable on-axis peak field at 4.2 K were calculated.

43 PARTICLE ACCELERATORS↗

Fabrication and Testing of 18-mm-Period, 0.5-m-Long Nb 3 Sn Superconducting Undulator

The Advanced Photon Source at Argonne National Laboratory, in collaboration with FNAL and LBNL, is developing a Nb 3 Sn superconducting undulator with the goal of installing this device on the APS storage ring and providing APS users with the novel radiation source. A series of short, similar to ~ 8-cm-long, 18-mm-period undulator prototype magnets have been designed, fabricated, and tested. The same design was scaled to fabricate a 0.5-m-long undulator prototype. Tests of this prototype showed that the designed peak magnetic field of 1.2 T at 850 A was successfully achieved. It represents at least a 20% improvement in comparison with a NbTi SCU having the same period and magnetic gap. Test results and lessons learned from the design process are reported here.

43 PARTICLE ACCELERATORS↗

Design and Analysis of Short Period 2G-HTS Undulators

Recent advancements in second-generation high-temperature superconducting (2G-HTS) materials have opened new possibilities for superconducting undulator (SCU) technology, particularly in achieving shorter periods and higher magnetic fields. Here, this paper presents the design and analysis of a short-period, as small as 10 mm, 2G-HTS undulator, focusing on magnetic performance, mechanical force minimization, and quench protection. A force-balanced coil pack design is introduced to significantly reduce mechanical stresses on the conductors, eliminating the need for heavy support structures. Rapid prototyping techniques such as3D printing is employed to refine the design for scalability and manufacturability. Correction schemes for end-field effects are developed using a combination of 2G-HTS tapes and NbTi conductors to optimize field integrals. Simulation results demonstrated that optimized magnetic performance and enhanced mechanical stability, positioning 2G-HTS undulators as promising candidates for storage ring and free-electron based light sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-Period Active Distribution Network Planning Using Multi-Stage Stochastic Programming and Nested Decomposition by SDDIP

This paper presents a multi-period active distribution network planning (ADNP) with distributed generation (DG). The objective of the proposed ADNP is to minimize the total planning cost, subject to both investment and operation constraints. The paper proposes a multi-stage stochastic optimization model to address DG uncertainties over several periods, in which the decisions are made sequentially by only using the present-stage information. A nested decomposition method is proposed which applies the stochastic dual dynamic integer programming (SDDIP) method to address computational intractabilities of the proposed ADNP approach. The presented numerical results and discussions on a 33-bus distribution system and a large-scale 906-bus system verify the effectiveness of the proposed ADNP method and its solution method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The forest, the cicadas and the holey fluxes: Periodical cicada impacts on soil respiration depends on tree mycorrhizal type

Abstract The emergence of billions of periodical cicadas affects plant and animal communities profoundly, yet little is known about cicada impacts on soil carbon fluxes. We investigated the effects of Brood X cicadas (Magicicada septendecim, M. cassinii and M. septendeculain) on soil CO 2 fluxes (R S ) in three Indiana forests. We hypothesizedR S would be sensitive to emergence hole density, with the greatest effects occurring in soils with the lowest ambient fluxes. In support of our hypothesis,R S increased with increasing hole density and greater effects were observed near AM‐associating trees (which expressed lower ambient fluxes) than near EcM‐associating trees. Additionally,R S from emergence holes increased the temperature sensitivity (Q 10 ) ofR S by 13%, elevating the Q 10 of ecosystem respiration. Brood X cicadas increased annualR S by ca. 2.5%, translating to an additional 717 Gg of CO 2 across forested areas. As such, periodical cicadas can have substantial effects on soil processes and biogeochemistry.

Environmental Sciences & Ecology↗

The characterization of the distant blazar GB6 J1239+0443 from flaring and low activity periods

In 2008, AGILE and Fermi detected gamma-ray flaring activity from the unidentified EGRET source 3EG J1236+0457, recently associated with a flat spectrum radio quasar (GB6 J1239+0443) at z = 1.762. The optical counterpart of the gamma-ray source underwent a flux enhancement of a factor of 15–30 in six years, and of ~10 in six months. Here, we interpret this flare-up in terms of a transition from an accretion-disc-dominated emission to a synchrotron-jet-dominated one. We analysed a Sloan Digital Sky Survey (SDSS) archival optical spectrum taken during a period of low radio and optical activity of the source. We estimated the mass of the central black hole using the width of the C iv emission line. In our work, we have also investigated SDSS archival optical photometric data and ultraviolet GALEX observations to estimate the thermal disc emission contribution of GB6 J1239+0443. This analysis of the gamma-ray data taken during the flaring episodes indicates a flat gamma-ray spectrum, with an extension of up to 15 GeV, with no statistically relevant sign of absorption from the broad-line region, suggesting that the blazar zone is located beyond the broad-line region. Our result is confirmed by the modelling of the broad-band spectral energy distribution (well constrained by the available multiwavelength data) of the flaring activity periods and by the accretion disc luminosity and black hole mass estimated by us using archival data.

79 ASTRONOMY AND ASTROPHYSICS↗

Rayleigh–Taylor Instability With Varying Periods of Zero Acceleration

We present our findings from a numerical investigation of the acceleration-driven Rayleigh–Taylor Instability, modulated by varying periods without an applied acceleration field. It is well known from studies on shock-driven Richtmyer–Meshkov instability that mixing without external forcing grows with a scaling exponent as ≈ t 0.20-0.28 When the Rayleigh–Taylor Instability is subjected to varying periods of “zero” acceleration, the structural changes to the mixing layer remain remarkably small. After the acceleration is re-applied, the mixing layer quickly resumes the profile of development it would have had if there had been no intermission. As a result, this behavior contrasts in particular with the strong sensitivity that is found to other variable acceleration profiles examined previously in the literature.

42 ENGINEERING↗

An overview of continuous and discrete phasor analysis of binned or time-gated periodic decays

Time-resolved analysis of periodically excited luminescence decays by the phasor method in the presence of time gating or binning is revisited. Analytical expressions for discrete configurations of square gates are derived and the locus of the phasors of such modified periodic single-exponential decays is compared to the canonical universal semicircle. The effects of IRF offset, decay truncation and gate shape are also discussed. Finally, modified expressions for the phase and modulus lifetimes are provided for some simple cases. A discussion of a modified phasor calibration approach is presented.

42 ENGINEERING↗

SU-E-T-639: A Study On the Response of 2D Array Detector for VMAT Delivery for a Period of Two Years

Purpose: To evaluate the 2D array for radiation response for a period of 2 years. Methods: 45 VMAT plans already treated and quality assured before 2 years, 1.5 years and 1 year were selected for the study. Quality assurances of the plans were done using 2D array combined with Octavius phantom. Verification plans were recalculated without changing any parameters in Eclipse 10.0 TPS using the AAA algorithm. Response of 2D array to the plans treated before 2 years, 1.5 years and 1 year where evaluated. The results were analyzed using the Gamma analysis method with the standard gamma passing criteria of 3mm distance to agreement (DTA) and 3% dose difference (DD). Results: All the plans evaluated passed the gamma analysis with a percentage greater than 95, except for three cases. Higher gamma passing criteria where observed for all the analyzed plans, when analysis done before 2 years, 1.5 years and 1 year. The standard deviation of ± 1.38, ± 1.40,± 0.97 where observed between the plans when verification plans did before 2 years, 1.5 years and 1 year respectively. Same set of plans shows a standard deviation of ± 0.70, ± 1.36, and ± 1.18, when analysis done recently. A significance difference in response of the array when analysis done recently for the verification plans treated and quality assured before 2 years.This indicates a slightly reduced response of 2D array towards radiation response as the array gets older. Conclusion: It is found that 2D array shows a reduced response against radiation detection over a period of years. An onsite calibration of the instrument is recommended before the measurements. A dose correction factor can be applied if necessary to the results if the radiation response and efficiency of the array is very poor.

07 ISOTOPE AND RADIATION SOURCES↗

MO-DE-207A-08: Four-Dimensional Cone-Beam CT Iterative Reconstruction with Time-Ordered Chain Graph Model for Non-Periodic Organ Motion and Deformation

Purpose: The purpose of this study is to propose a new concept of four-dimensional (4D) cone-beam CT (CBCT) reconstruction for non-periodic organ motion using the Time-ordered Chain Graph Model (TCGM), and to compare the reconstructed results with the previously proposed methods, the total variation-based compressed sensing (TVCS) and prior-image constrained compressed sensing (PICCS). Methods: CBCT reconstruction method introduced in this study consisted of maximum a posteriori (MAP) iterative reconstruction combined with a regularization term derived from a concept of TCGM, which includes a constraint coming from the images of neighbouring time-phases. The time-ordered image series were concurrently reconstructed in the MAP iterative reconstruction framework. Angular range of projections for each time-phase was 90 degrees for TCGM and PICCS, and 200 degrees for TVCS. Two kinds of projection data, an elliptic-cylindrical digital phantom data and two clinical patients’ data, were used for reconstruction. The digital phantom contained an air sphere moving 3 cm along longitudinal axis, and temporal resolution of each method was evaluated by measuring the penumbral width of reconstructed moving air sphere. The clinical feasibility of non-periodic time-ordered 4D CBCT reconstruction was also examined using projection data of prostate cancer patients. Results: The results of reconstructed digital phantom shows that the penumbral widths of TCGM yielded the narrowest result; PICCS and TCGM were 10.6% and 17.4% narrower than that of TVCS, respectively. This suggests that the TCGM has the better temporal resolution than the others. Patients’ CBCT projection data were also reconstructed and all three reconstructed results showed motion of rectal gas and stool. The result of TCGM provided visually clearer and less blurring images. Conclusion: The present study demonstrates that the new concept for 4D CBCT reconstruction, TCGM, combined with MAP iterative reconstruction framework enables time-ordered image reconstruction with narrower time-window.

60 APPLIED LIFE SCIENCES↗

Discovery of log-periodic oscillations in ultraquantum topological materials

Quantum oscillations are usually the manifestation of the underlying physical nature in condensed matter systems. Here, we report a new type of log-periodic quantum oscillations in ultraquantum three-dimensional topological materials. Beyond the quantum limit (QL), we observe the log-periodic oscillations involving up to five oscillating cycles (five peaks and five dips) on the magnetoresistance of high-quality single-crystal ZrTe 5 , virtually showing the clearest feature of discrete scale invariance (DSI). Further, theoretical analyses show that the two-body quasi-bound states can be responsible for the DSI feature. Finally, our work provides a new perspective on the ground state of topological materials beyond the QL.

36 MATERIALS SCIENCE↗

Self-organization of nanoparticles and molecules in periodic Liesegang-type structures

Chemical organization in reaction-diffusion systems offers a strategy for the generation of materials with ordered morphologies and structural hierarchy. Periodic structures are formed by either molecules or nanoparticles. On the premise of new directing factors and materials, an emerging frontier is the design of systems in which the precipitation partners are nanoparticles and molecules. We show that solvent evaporation from a suspension of cellulose nanocrystals (CNCs) and L -(+)-tartaric acid [ L -(+)-TA] causes phase separation and precipitation, which, being coupled with a reaction/diffusion, results in rhythmic alternation of CNC-rich and L -(+)-TA–rich rings. The CNC-rich regions have a cholesteric structure, while the L -(+)-TA–rich bands are formed by radially aligned elongated bundles. The moving edge of the pattern propagates with a finite constant velocity, which enables control of periodicity by varying film preparation conditions. This work expands knowledge about self-organizing reaction-diffusion systems and offers a strategy for the design of self-organizing materials.

36 MATERIALS SCIENCE↗

Periodic Emission from the Gamma-Ray Binary 1FGL J1018.6-5856

Gamma-ray binaries are stellar systems containing a neutron star or black hole with gamma-ray emission produced by an interaction between the components. These systems are rare, even though binary evolution models predict dozens in our Galaxy. A search for gamma-ray binaries with the Fermi Large Area Telescope (LAT) shows that 1FGL J1018.6-5856 exhibits intensity and spectral modulation with a 16.6 day period. We identified a variable X-ray counterpart, which shows a sharp maximum coinciding with maximum gamma-ray emission, as well as an O6V((f)) star optical counterpart and a radio counterpart that is also apparently modulated on the orbital period. 1FGL J1018.6-5856 is thus a gamma-ray binary, and its detection suggests the presence of other fainter binaries in the Galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗