Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Quenching of single-particle strength inferred from nucleon-removal transfer reactions on 15 C

The difference in the proton and neutron separation energies (ΔS) of the weakly bound 15 C ground state is -19.86 MeV, an extreme value. Data from intermediate-energy heavy-ion induced (HI-induced) knockout reactions on nuclei spanning -20 ≲ ΔS ≲ +20 MeV, suggest that the degree to which single-particle strength is quenched, R s , has a negative correlation with ΔS, decreasing from unity around -20 MeV to around 0.2 at +20 MeV. For the 15 C ground state (R s = 0.96 (4) in HI-induced knockout), contrasting results have recently been obtained via the neutron-adding transfer reaction, which reveal a value of R s = 0.64 (15), similar to the value observed at modest and more extreme values of ΔS with reaction probes other than HI knockout. In order to explore the any potential differences between adding and removing processes in transfer reactions at extreme ΔS, single-neutron removal transfer reactions on 15 C were performed at 7.1 MeV/u in inverse kinematics. The removal of a valence neutron in 2s 1/2 orbit using both (p, d) and (d, t) reactions shows consistent quenching factors and agrees with those from the neutron-adding reaction. The present results, which can be compared with neutron knockout reaction, suggest that correlations, represented by the quenching factor, show limited dependence on neutron-proton asymmetry under the most extreme asymmetry conditions so far achieved in transfer reactions.

quenching factor↗

Automation of Extraction Chromatograhic and Ion Exchange Separations for Radiochemical Analysis and Monitoring

Radiochemical analysis, complete with the separation of radionuclides of interest from the sample matrix and from other interfering radionuclides, is often an essential step in the determination of the radiochemical composition of a nuclear sample or process stream. Although some radionuclides can be determined nondestructively by gamma spectroscopy, where the gamma rays penetrate significant distances in condensed media and the gamma ray energies are diagnostic for specific radionuclides, other radionuclides that may be of interest emit only alpha or beta particles. For these, samples must be taken for destructive analysis and radiochemical separations are required. For process monitoring purposes, the radiochemical separation and detection methods must be rapid so that the results will be timely. These results could be obtained by laboratory analysis or by radiochemical process analyzers operating on-line or at-site. In either case, there is a need for automated radiochemical analysis methods to provide speed, throughput, safety, and consistent analytical protocols. Classical methods of separation used during the development of nuclear technologies, namely manual precipitations, solvent extractions, and ion exchange, are slow and labor intensive. Fortunately, the convergence of digital instrumentation for preprogrammed fluid manipulation and the development of new separation materials for column-based isolation of radionuclides has enabled the development of automated radiochemical analysis methodology. The primary means for separating radionuclides in solution are liquid-liquid extraction and ion exchange. These processes are well known and have been reviewed in the past.1 Ion exchange is readily employed in column formats. Liquid-liquid extraction can also be implemented on column formats using solvent-impregnated resins as extraction chromatographic materials. The organic liquid extractant is immobilized in the pores of a microporous polymer material. Under suitable conditions, the analyte of interest partitions into the immobilized organic phase while other matrix speces and interferences are washed away in the mobile aqueous phase. After the wash step, retained analytes are rapidly released in one or more steps by changing the aqueous eluent, such that the analytes now partition back into the mobile phase. The development of solvent impregnated resins, their physical chemistry, technological applications for metal and radionuclide recovery, and analytical uses were described in detail in a previous chapter in this series by Cortina and Warshawsky. The extraction chromatographic approach is well suited for the isolation of radionuclides from complex sample matrixes in a rapid automated format. The development of automated radioanalytical methods is, in fact, closely coupled to the availability of such materials. In this review, we will focus on the application of radiochemical separations in automated fluidic formats for the analysis of alpha- and beta-emitting radionuclides.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

The 17 April 2021 Widespread Solar Energetic Particle Event

A complex and long-lasting solar eruption on 17 April 2021 produced a widespread solar energetic particle (SEP) event that was observed by five longitudinally well-separated observers in the inner heliosphere that covered distances to the Sun from 0.42 to 1 au: BepiColombo, Parker Solar Probe, Solar Orbiter, STEREO A, and near-Earth spacecraft. The event was the second widespread SEP event detected in solar cycle 25, and it produced relativistic electrons and protons. It was associated with a long-lasting solar hard X-ray flare that showed multiple hard X-ray peaks over a duration of one hour. The event was further accompanied by a medium-fast coronal mass ejection (CME) with a speed of 880 km s -1 that drove a shock, an extreme ultraviolet wave, and long-lasting and complex radio burst activity that showed four distinct type III burst groups over a period of 40 min. We aim to understand the reason for the wide spread of elevated SEP intensities in the inner heliosphere as well as identify the underlying source regions of the observed energetic electrons and protons. We applied a comprehensive multi-spacecraft analysis of remote-sensing observations and in situ measurements of the energetic particles and interplanetary context to attribute the SEP observations at the different locations to the various potential source regions at the Sun. We used an ENLIL simulation to characterize the complex interplanetary state and its role in the energetic particle transport. The magnetic connection between each spacecraft and the Sun was determined using ballistic backmapping in combination with potential field source surface extrapolations in the lower corona. Using also a reconstruction of the coronal shock front, we then determined the times when the shock establishes magnetic connections with the different observers. Radio observations were used to characterize the directivity of the four main injection episodes, which were then employed in a 2D SEP transport simulation to test the importance of these different injection episodes. A comprehensive timing analysis of the inferred solar injection times of the SEPs observed at each spacecraft suggests different source processes being important for the electron and proton events. Comparison among the characteristics and timing of the potential particle sources, such as the CME-driven shock or the flare, suggests a stronger shock contribution for the proton event and a more likely flare-related source for the electron event. In contrast to earlier studies on widespread SEP events, we find that in this event an important ingredient for the wide SEP spread was the wide longitudinal range of about 110 o covered by distinct SEP injections, which is also supported by our SEP transport modeling.

sun↗

The effect of secondary electrons on the separate control of ion energy and flux in dual-frequency capacitively coupled radio frequency discharges

Dual-frequency capacitive discharges are used to separately control the mean ion energy, {epsilon}{sub ion}, and flux, {Gamma}{sub ion}, at the electrodes. We study the effect of secondary electrons on this separate control in argon discharges driven at 2+27 MHz at different pressures using Particle in Cell simulations. For secondary yield {gamma}{approx_equal}0, {Gamma}{sub ion} decreases as a function of the low frequency voltage amplitude due to the frequency coupling, while it increases at high {gamma} due to the effective multiplication of secondary electrons inside the sheaths. Therefore, separate control is strongly limited. {epsilon}{sub ion} increases with {gamma}, which might allow an in situ determination of {gamma}-coefficients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pectin-associated mannans and xylans play distinct roles in cell-cell adhesion in pine and poplar wood

Wood particles of pine required longer treatments of acidic chlorite and dilute alkali to achieve similar proportions of cell separation as of poplar. Chemical extraction and enzymatic digestion studies indicated that rhamnogalacturonan-I (RG-I), mannan and xylan contribute to cell-cell adhesion in pine wood. Mannan associated with lignin in an acidic chlorite fraction and with xylan in a dilute alkali fraction. RG-I and xylan were extracted in both chlorite and dilute alkali in poplar. Scanning electron microscopy and a probe diffusion study using Fluorescence Recovery After Photobleaching showed that lignin, RG-I and mannan initiated cell separation at cell corners and dilute alkali extraction of xylan was required for complete cell separation in pine. Cell-cell separation increased enzymatic saccharification within 24 h by 2-fold in poplar and 3.4-fold in pine. Finally, our results inform a strategy to reduce particle size in woody biomass and provide insights into different molecular bases of cell-cell adhesion.

59 BASIC BIOLOGICAL SCIENCES↗

Integrable RCS as a Proposed Replacement for Fermilab Booster

Integrable optics is an innovation in particle accelerator design that potentially enables a greater betatron tune spread and damps collective instabilities. An integrable rapid-cycling synchrotron (RCS) would be an effective replacement for the Fermilab Booster, as part of a plan to reach multi-MW beam power at 120 GeV for the Fermilab high-energy neutrino program. We provide an example integrable lattice with features of a modern RCS - dispersion-free drifts, low momentum compaction factor, superperiodicity, chromaticity correction, bounded beta functions, and separate-function magnets.

43 PARTICLE ACCELERATORS↗

Measurement and interpretation of moments in inclusive semileptonic decays B{yields}X{sub c}l{sup -{nu}}

We present results for the moments of observed spectra in inclusive semileptonic B-meson decays to charm hadrons B{yields}X{sub c}l{sup -{nu}}. Moments of the hadronic-mass and the combined mass-and-energy spectra for different minimum electron or muon momenta between 0.8 and 1.9 GeV/c are obtained from a sample of 232x10{sup 6} {Upsilon}(4S){yields}BB events, collected with the BABAR detector at the PEP-II asymmetric-energy B-meson factory at SLAC. We also present a reevaluation of the moments of electron-energy spectra and partial decay fractions B(B{yields}X{sub c}e{sup -{nu}}) for minimum electron momenta between 0.6 and 1.5 GeV/c based on a sample of 51x10{sup 6} {Upsilon}(4S){yields}BB events. The measurements are used for the extraction of the total decay fraction, the Cabibbo-Kobayashi-Maskawa (CKM) matrix element |V{sub cb}|, the quark masses m{sub b} and m{sub c}, and four heavy-quark QCD parameters in the framework of a Heavy-Quark Expansion (HQE). We find B(B{yields}X{sub c}l{sup -{nu}})=(10.64{+-}0.17{+-}0.06)% and |V{sub cb}|=(42.05{+-}0.45{+-}0.70)x10{sup -3}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the absolute branching fractions for D{sub s}{sup -}{yields}l{sup -}{nu}{sub l} and extraction of the decay constant f{sub D{sub s}}

The absolute branching fractions for the decays D{sub s}{sup -}{yields}l{sup -}{nu}{sub l} (l=e, {mu}, or {tau}) are measured using a data sample corresponding to an integrated luminosity of 521 fb{sup -1} collected at center-of-mass energies near 10.58 GeV with the BABAR detector at the PEP-II e{sup +}e{sup -} collider at SLAC. The number of D{sub s}{sup -} mesons is determined by reconstructing the recoiling system DKX{gamma} in events of the type e{sup +}e{sup -}{yields}DKXD{sub s}{sup *-}, where D{sub s}{sup *-}{yields}D{sub s}{sup -}{gamma} and X represents additional pions from fragmentation. The D{sub s}{sup -}{yields}l{sup -}{nu}{sub l} events are detected by full or partial reconstruction of the recoiling system DKX{gamma}l. The branching fraction measurements are combined to determine the D{sub s}{sup -} decay constant f{sub D{sub s}}=(258.6{+-}6.4{+-}7.5) MeV, where the first uncertainty is statistical and the second is systematic.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The status of open heavy flavor production at RHIC

We discuss the calculation of open heavy flavor cross sections at RHIC and describe how the semileptonic decays of charm and bottom quarks can be separated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Controlling Catalyst–Semiconductor Contacts: Interfacial Charge Separation in p-InP Photocathodes

Charge-carrier-selective interfaces between electrocatalyst particles and semiconductor light absorbers are critical for solar photochemistry but controlling their properties is challenging. Using thin films and nanoparticle arrays of Pt hydrogen-evolution catalysts on p-InP (a high-performance photocathode material), along with macroscopic and nanoscopic electrical and chemical analysis, we show how hydrogen alloying, the pinch-off effect for nanoscale contacts, and the formation of a native surface oxides all play different roles in creating charge-carrier-selective junctions. As a result, the new insights can be broadly applied to photocathodes, photoanodes, and overall water-splitting systems to control charge-carrier selectivity and improve performance.

14 SOLAR ENERGY↗

Nonlinear CMB temperature anisotropy from gravitational perturbations

Nonlinear CMB temperature anisotropies up to the third order on large scales are calculated. On large scales and in the Sachs-Wolfe limit, we give the explicit expression for the observed temperature anisotropy in terms of the primordial curvature perturbation up to the third order. We derived the final bispectrum and trispectrum of anisotropies and the corresponding nonlinear parameters, in which the contributions to the observed non-Gaussianity from primordial perturbations and from the nonlinear mapping from primordial curvature perturbation to the temperature anisotropy are transparently separated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On possibility to observe chiral phase transition in separate fragments of dense baryon matter

Density fluctuations of intranuclear matter suffering collisions with projectile particles are capable to turn into multiquark clusters with chiral symmetry restored. Theoretical analysis of these processes requires an additional taking account of finite-size effects in the region of the chiral phase transition. From the experimental point of view, this method of observation of the chiral phase transition has its inherent advantages due to a relatively moderate number of secondary particles to be registered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the inclusive isolated prompt photon cross-section in p p collisions at s = 7 TeV using 35 pb − 1 of ATLAS data

CERN-LHC. Measurement of the inclusive production of isolated prompt photons in proton-proton collisions at a centre-of-mass energy of 7 TeV. The data sample used has an integrated luminosity of 35 pb-1. Photons are isolated if the total transverse energy in a cone (in phi,eta space) of radius R=0.4 is less than a cut value of 4 GeV. The four systematic errors shown in the tables represent, respectively, the uncertainties in (1) the purity measurment, (2) the photon selection and identification efficiency, (3) the correlation between the efficiency and purity determination and (4) the unfolding process. The luminosity uncertainty of 3.4% is shown separately.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A search for integrable four-dimensional nonlinear accelerator lattices

Integrable nonlinear motion in accelerators has the potential to introduce a large betatron tune spread to suppress instabilities and to mitigate the effects of space charge and magnetic field errors. To create such an accelerator lattice one has to find magnetic and/or electric field combinations leading to a stable integrable motion. This paper presents families of lattices with one invariant where bounded motion can be easily created in large volumes of the phase space. In addition, it presents two examples of integrable nonlinear accelerator lattices, realizable with longitudinal-coordinate-dependent magnetic or electric fields with the stable nonlinear motion, which can be solved in terms of separable variables.

43 PARTICLE ACCELERATORS↗

Redox active polymers and colloidal particles for flow batteries

The invention provides a redox flow battery comprising a microporous or nanoporous size-exclusion membrane, wherein one cell of the battery contains a redox-active polymer dissolved in the non-aqueous solvent or a redox-active colloidal particle dispersed in the non-aqueous solvent. The redox flow battery provides enhanced ionic conductivity across the electrolyte separator and reduced redox-active species crossover, thereby improving the performance and enabling widespread utilization. Redox active poly(vinylbenzyl ethylviologen) (RAPs) and redox active colloidal particles (RACs) were prepared and were found to be highly effective redox species. Controlled potential bulk electrolysis indicates that 94-99% of the nominal charge on different RAPs is accessible and the electrolysis products are stable upon cycling. The high concentration attainable (>2.0 M) for RAPs in common non-aqueous battery solvents, their electrochemical and chemical reversibility, and their hindered transport across porous separators make them attractive materials for non-aqueous redox flow batteries based on size-selectivity.

25 ENERGY STORAGE↗

The First Widespread Solar Energetic Particle Event Observed By Solar Orbiter on 2020 November 29

Context. On 2020 November 29, the first widespread solar energetic particle (SEP) event of solar cycle 25 was observed at four widely separated locations in the inner (. 1AU) heliosphere. Relativistic electrons as well as protons with energies > 50MeV were observed by Solar Orbiter (SolO), Parker Solar Probe (PSP), the Solar Terrestrial Relations Observatory (STEREO)-A and multiple near-Earth spacecraft. The SEP event was associated with an M4.4 class X-ray flare and accompanied by a coronal mass ejection (CME) and an extreme ultraviolet (EUV) wave as well as a type II radio burst and multiple type III radio bursts. Aims. We present multi-spacecraft particle observations and place them in context with source observations from remote sensing instruments and discuss how such observations may further our understanding of particle acceleration and transport in this widespread event. Methods. Velocity dispersion analysis (VDA) and time shift analysis (TSA) were used to infer the particle release times at the Sun. Solar wind plasma and magnetic field measurements were examined to identify structures that influence the properties of the energetic particles such as their intensity. Pitch angle distributions and first-order anisotropies were analyzed in order to characterize the particle propagation in the interplanetary medium. Results. We find that during the 2020 November 29 SEP event, particles spread over more than 230° in longitude close to 1AU. The particle onset delays observed at the different spacecraft are larger as the flare–footpoint angle increases and are consistent with those from previous STEREO observations. Comparing the timing when the EUV wave intersects the estimated magnetic footpoints of each spacecraft with particle release times from TSA and VDA, we conclude that a simple scenario where the particle release is only determined by the EUV wave propagation is unlikely for this event. Observations of anisotropic particle distributions at SolO, Wind, and STEREO-A do not rule out that particles are injected over a wide longitudinal range close to the Sun. However, the low values of the first-order anisotropy observed by near-Earth spacecraft suggest that diffusive propagation processes are likely involved.

A Kollhoff↗

'Light Sail' Acceleration Reexamined

The dynamics of the acceleration of ultrathin foil targets by the radiation pressure of superintense, circularly polarized laser pulses is investigated by analytical modeling and particle-in-cell simulations. By addressing self-induced transparency and charge separation effects, it is shown that for 'optimal' values of the foil thickness only a thin layer at the rear side is accelerated by radiation pressure. The simple 'light sail' model gives a good estimate of the energy per nucleon, but overestimates the conversion efficiency of laser energy into monoenergetic ions.

43 PARTICLE ACCELERATORS↗

Scalar contribution to the BFKL kernel

The contribution of scalar particles to the kernel of the Balitsky-Fadin-Kuraev-Lipatov (BFKL) equation is calculated. A great cancellation between the virtual and real parts of this contribution, analogous to the cancellation in the quark contribution in QCD, is observed. The reason of this cancellation is discovered. This reason has a common nature for particles with any spin. Understanding of this reason permits to obtain the total contribution without the complicated calculations, which are necessary for finding separate pieces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗