Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOEMISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Unusual magnetic and transport properties in HoMn 6 Sn 6 kagome magnet

Here, with intricate lattice structures, kagome materials are an excellent platform to study various fascinating topological quantum states. In particular, kagome materials, revealing large responses to external stimuli such as pressure or magnetic field, are subject to special investigation. Here we study the kagome-net HoMn 6 Sn 6 magnet that undergoes paramagnetic to ferrimagnetic transition (below 376 K) and reveals spin-reorientation transition below 200 K. In this compound, we observe the topological Hall effect and substantial contribution of anomalous Hall effect above 100 K. We unveil the pressure effects on magnetic ordering at a low magnetic field from the pressure tunable magnetization measurement. By utilizing high-resolution angle-resolved photoemission spectroscopy, Dirac-like dispersion at the high-symmetry point K is revealed in the vicinity of the Fermi level, which is well supported by the first-principles calculations. Our investigation will pave the way to understanding the magnetotransport and electronic properties of various rare-earth-based kagome magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological spin memory of antiferromagnetically coupled skyrmion pairs in Co/Gd/Pt multilayers

Antiferromagnetically (AFM) coupled skyrmions offer potential advantages for spintronic devices, including reduced dipolar fields that may enable smaller skyrmion sizes and a reduction of the skyrmion Hall effect. However, the topological stability of AFM-coupled skyrmions subjected to dramatic spin deformation through low-temperature cycling has not been investigated. We report the discovery of a topological spin memory effect for AFM-coupled skyrmion pairs in [Co/Gd/Pt](10) multilayered films. Photoemission electron microscopy imaging shows that bubble skyrmions in the multilayer that are stable at room temperature evolve into complex in-plane spin textures as the temperature is lowered and reform completely when the sample is warmed back up. Simulations demonstrate that Dzyaloshinskii-Moriya interactions play a key role in this spin memory effect, and furthermore reveal that the topological charge is preserved throughout the dramatic spin texture rearrangement and recovery. These results highlight a key aspect of topological protection-the preservation of the topological properties under continuous deformation-and also provide a promising avenue for information encryption and recovery.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial growth, magnetoresistance, and electronic band structure of GdSb magnetic semimetal films

Motivated by observations of extreme magnetoresistance (XMR) in bulk crystals of rare-earth monopnictide (RE-V) compounds and emerging applications in novel spintronic and plasmonic devices based on thin-film semimetals, we have investigated the electronic band structure and transport behavior of epitaxial GdSb thin films grown on III-V semiconductor surfaces. The Gd 3 + ion in GdSb has a high spin S=7/2 and no orbital angular momentum, serving as a model system for studying the effects of antiferromagnetic order and strong exchange coupling on the resulting Fermi surface and magnetotransport properties of RE-Vs. Here, we present a surface and structural characterization study mapping the optimal synthesis window of thin epitaxial GdSb films grown on III-V lattice-matched buffer layers via molecular-beam epitaxy. To determine the factors limiting XMR in RE-V thin films and provide a benchmark for band-structure predictions of topological phases of RE-Vs, the electronic band structure of GdSb thin films is studied, comparing carrier densities extracted from magnetotransport, angle-resolved photoemission spectroscopy (ARPES), and density-functional theory (DFT) calculations. ARPES shows a hole-carrier rich, topologically trivial, semimetallic band structure close to complete electron-hole compensation, with quantum confinement effects in the thin films observed through the presence of quantum-well states. DFT-predicted Fermi wave vectors are in excellent agreement with values obtained from quantum oscillations observed in magnetic field-dependent resistivity measurements. An electron-rich Hall coefficient is measured despite the higher hole-carrier density, attributed to the higher electron Hall mobility. The carrier mobilities are limited by surface and interface scattering, resulting in lower magnetoresistance than that measured for bulk crystals.

36 MATERIALS SCIENCE↗

Revealing the two-dimensional electronic structure and anisotropic superconductivity in a natural van der Waals superlattice (PbSe) 1.14 NbSe 2

Van der Waals superlattices are important for tailoring the electronic structures and properties of layered materials. Here we report the superconducting properties and electronic structure of a natural van der Waals superlattice (PbSe) 1.14 NbSe 2 . Anisotropic superconductivity with a transition temperature T c = 5.6 ± 0.1 K, which is higher than monolayer NbSe 2 , is revealed by transport measurements on high-quality samples. Angle-resolved photoemission spectroscopy (ARPES) measurements reveal the two-dimensional electronic structure and a charge transfer of 0.43 electrons per NbSe 2 unit cell from the blocking PbSe layer. In addition, polarization-dependent ARPES measurements reveal a significant circular dichroism with opposite contrast at K and K' valleys, suggesting a significant spin-orbital coupling and distinct orbital angular momentum. In conclusion, our work suggests natural van der Waals superlattice as an effective pathway for achieving intriguing properties distinct from both the bulk and monolayer samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Complex fermiology and electronic structure of antiferromagnet EuSnP

Throughout this work, we studied the electronic structure of a layered antiferromagnetic metal, EuSnP, in the paramagnetic and in the antiferromagnetic phase using angle-resolved photoemission spectroscopy (ARPES) alongside density-functional theory (DFT)-based first-principles calculations. The temperature dependence of the magnetic susceptibility measurements exhibits an antiferromagnetic transition at a Néel temperature of 21 K. Employing high-resolution ARPES, the valence-band structure was measured at several temperatures above and below the Néel temperature, which produced identical spectra independent of temperature. Through analysis of the ARPES results presented here, we attribute the temperature-independent spectra to the weak coupling of the Sn and P conduction electrons with Eu 4⁢ƒ states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of a nodal line semimetal candidate TbSbTe

The 𝐿⁢𝑛⁢SbTe (𝐿⁢𝑛 = Lanthanides) family, like isostructural ZrSiS-type compounds, has emerged as a fertile playground for exploring the interaction of electronic correlations and magnetic ordering with the nodal line band topology. Here, we report on a detailed electronic band structure investigation of TbSbTe, corroborated by electrical transport, thermodynamic, and magnetic studies. Temperature-dependent magnetic susceptibility and thermodynamic transport studies indicate the onset of antiferromagnetic ordering below 𝑇 𝑁 ∼ 5.8K. The electronic band structure study, carried out with high-resolution angle-resolved photoemission spectroscopy measurements aided with density functional theory–based first-principles calculations reveal presence of a nonsymmorphic symmetry-protected Dirac crossing in the Γ-X high-symmetry (HS) direction, which is part of a nodal line along the X-R HS direction. Another Dirac crossing occurs along the Γ-X direction at a relatively higher binding energy, which occurs from $\tilde{𝒞}$ 2⁢𝜈⁢ 𝒫 symmetry which is gapped in the theoretical calculations with the effect of spin-orbit coupling considered. Parallel to this direction, our theoretical calculations and experimental results exhibit strongly momentum-dependent surface bands. In this study, we open an avenue to further uncover the intricate interplay among symmetry-protected topological band structure, spin-orbit coupling, and magnetism in this material and the 𝐿⁢𝑛⁢SbTe family, in general.

Angle-resolved photoemission spectroscopy↗

Single-crystalline orthorhombic GdAlGe as a rare-earth magnetic Dirac nodal-line metal

Crystal engineering is a method for discovering new quantum materials and phases, which may be achieved using external pressure or strain. Chemical pressure is unique in that it generates internal pressure perpetually to the lattice. As an example, GdAlSi from the rare-earth (𝑅) 𝑅⁢Al⁢𝑋 (𝑋=Si or Ge) family of Weyl semimetals is considered. Replacing Si with the larger isovalent element Ge creates sufficiently large chemical pressure to induce a structural transition from the tetragonal structure of GdAlSi, compatible with a Weyl semimetallic state, to an orthorhombic phase in GdAlGe, resulting in an inversion-symmetry-protected nodal-line metal. We find that GdAlGe hosts an antiferromagnetic ground state with two successive orderings, at 𝑇 N ⁢1=35K and 𝑇 N ⁢2=30K. In-plane isothermal magnetization shows a magnetic field induced metamagnetic transition at 6.2 T for 2 K. Furthermore, electron-hole compensation gives rise to a large magnetoresistance of ∼100% at 2 K and 14 T. Angle-resolved photoemission spectroscopy measurements and density functional theory calculations reveal a Dirac-like linear band dispersion over an exceptionally large energy range of ∼1.5eV with a high Fermi velocity of ∼10 6 m/s, a rare feature not observed in any magnetic topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser-driven nonlinear cluster dynamics

Laser excitation of nanometer-sized atomic and molecular clusters offers various opportunities to explore and control ultrafast many-particle dynamics. Whereas weak laser fields allow the analysis of photoionization, excited-state relaxation, and structural modifications on these finite quantum systems, large-amplitude collective electron motion and Coulomb explosion can be induced with intense laser pulses. This review provides an overview of key phenomena arising from laser-cluster interactions with focus on nonlinear optical excitations and discusses the underlying processes according to the current understanding. A general survey covers basic cluster properties and excitation mechanisms relevant for laser-driven cluster dynamics. Then, after an excursion in theoretical and experimental methods, results for single-photon and multiphoton excitations are reviewed with emphasis on signatures from time- and angular-resolved photoemission. A key issue of this review is the broad spectrum of phenomena arising from clusters exposed to strong fields, where the interaction with the laser pulse creates short-lived and dense nanoplasmas. The implications for technical developments such as the controlled generation of ion, electron, and radiation pulses will be addressed along with corresponding examples. Finally, future prospects of laser-cluster research as well as experimental and theoretical challenges are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Surface preparation method for investigating the three-dimensional electronic structure of perovskite nickelates

The investigation of the electronic structures on perovskite oxides using surface-sensitive spectroscopy techniques is often hindered by their “uncleavable” nature, typically requiring expensive and complex in situ experimental setups that integrate the capabilities of sample synthesis and spectroscopy measurement under ultrahigh vacuum condition. Here, we address this challenge by developing an ozone-annealing process that yields atomically flat surfaces on perovskite oxide thin films, making them suitable for high-resolution angle-resolved photoemission spectroscopy measurements. Using this method, we present a three-dimensional electronic structure study of Nd 1−𝑥 ⁢Sr 𝑥 ⁢NiO 3 (𝑥=0 and 0.175) thin films with unprecedented accuracy. The experimentally determined low-energy fermiology exhibits quantitative agreements with two-band tight-binding simulations, which is further validated by first-principles calculations considering the material's actual crystal structure. This work provides an accessible approach for ex situ ARPES measurements on perovskite oxides and other strongly correlated oxides, including the recently discovered high-𝑇 c nickelates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental confirmation of the magnetic ordering transition induced by an electronic structure change in the metallic triangular antiferromagnet Co 1/3⁢ TaS 2

We report angle-resolved photoemission spectroscopy (ARPES) studies combined with DFT+DMFT calculations to confirm that the magnetic ordering vector transition from Q=(1/2,0,0) to Q=(1/3,0,0) in the metallic triangular antiferromagnets Co 1/3±𝜀⁢ TaS 2 (𝜀 ≈ 0.007) is induced by the electronic structure change in the system. The ARPES-measured Fermi surface (FS) maps of Co 0.325 ⁢TaS 2 show two hexagonal and one circular holelike FSs around Γ, which matches well with the triple- Q state by taking into account the contribution of nesting vectors occurring between Co 3⁢𝑑 and Ta 5⁢𝑑 orbitals. In the case of Co 0.340 ⁢TaS 2 , a new electron pocket around K appears, and the FS geometry changes as a result of the correlation effect of Co 4 ⁢S 18 tripods forming in the system. The magnetic susceptibility calculations based on the charge-self-consistent DFT+DMFT band structures and the random phase approximation indicate that the most stable magnetic ordering vector (1/2,0,0) split into (1/6,0,0) and (1/2,0,0), which is consistent with the magnetic phase transition around 𝑥=1/3 in Co 𝑥 ⁢TaS 2 .

Fermi surface↗

Ultrahigh vacuum sample mount for x-ray photoelectron spectroscopy up to very high temperature (150-1400 K)

Spectroscopic studies are rarely performed at very high temperature, especially when combined with light from a synchrotron source. Demanding conditions of maintaining ultrahigh vacuum (UHV) during heating, together with the typically brief access to beam time at multiuser synchrotron end stations, may contribute to some of the reasons for the difficulty of such experiments. Consequently, a large number of materials with interesting properties and industrial applications at high temperature remain unexplored. The authors describe here a simple portable sample mount assembly that can be easily utilized at a beamline, with potential utility for a variety of spectroscopic measurements requiring elevated temperatures and an UHV environment. In the specific application described here, the authors use a resistive cartridge heater interfaced with a standard manipulator previously designed for cooling by liquid nitrogen with an UHV chamber and a cylindrical mirror analyzer for x-ray photoemission spectroscopy (XPS) [also known as electron spectroscopy for chemical analysis (ESCA)] at the Synchrotron Radiation Center in Stoughton, WI. The heater cartridge required only modest power to reach target temperatures using an open-loop temperature control. Finally, the authors describe the measurements of XPS (ESCA) and total-electron yield x-ray absorption spectroscopy on nanopowders and on single crystals grown by them. They emphasize the simplicity of the setup, which they believe would be of interest to groups performing measurements at large facilities, where access and time are both limited.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Plasma and vacuum ultraviolet induced charging of SiO{sub 2} and HfO{sub 2} patterned structures

The authors compare the effects of plasma charging and vacuum ultraviolet (VUV) irradiation on oxidized patterned Si structures with and without atomic-layer-deposited HfO{sub 2}. It was found that, unlike planar oxidized Si wafers, oxidized patterned Si wafers charge up significantly after exposure in an electron-cyclotron resonance plasma. The charging is dependent on the aspect ratio of the patterned structures. This is attributed to electron and/or ion shading during plasma exposure. The addition of a 10 nm thick HfO{sub 2} layer deposited on top of the oxidized silicon structures increases the photoemission yield during VUV irradiation, resulting in more trapped positive charge compared to patterns without the HfO{sub 2} dielectric.

36 MATERIALS SCIENCE↗

Compositional depth profiling of TaCN thin films

The composition profiling of thin TaCN films was studied. For the composition profile determination using x-ray photoemission spectrometry (XPS) in combination with Ar sputtering, preferential sputtering effects of N with respect to Ta and C were found to lead to inaccurate elemental concentrations. Sputter yield calculations for the given experimental conditions allowed for the correction of a part of the error, leading to fair accuracy by reference-free measurements. Further improvement of the accuracy was demonstrated by the calibration of the XPS compositions against elastic recoil detection analysis (ERDA) results. For Auger electron spectrometry (AES) in combination with Ar sputtering, accurate results required the calibration against ERDA. Both XPS and AES allowed for a reliable and accurate determination of the compositional profiles of TaCN-based thin films after calibration. Time-of-flight secondary-ion mass spectrometry was also used to assess the composition of the TaCN films. However, the analysis was hampered by large matrix effects due to small unintentional oxygen contents in the films. Energy-dispersive x-ray spectrometry is also discussed, and it is shown that an accurate reference-free measurement of the average film concentration can be achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Copper deposition on TiO{sub 2} from copper(II)hexafluoroacetylacetonate

The authors have studied the adsorption of Cu{sup II}(hfac){sub 2} on the surface of a model oxide system, TiO{sub 2}(110), and probed the molecular stability with respect to thermal cycling, using atomic scale imaging by scanning tunneling microscopy supported by x-ray photoemission spectroscopy. They find that at 473 K, the adsorbed metal-organic molecules begin to dissociate and release Cu atoms which aggregate and form Cu nanoparticles. These Cu nanoparticles ripen over time and the size (height) distribution develops into a bimodal distribution. Unlike other organometallic systems, which show a bimodal distribution due to enhanced nucleation or growth at surface step edges, the nanoparticles do not preferentially form at steps. The reduced mobility of the Cu islands may be related to the co-adsorbed ligands that remain in very small clusters on the surface.

36 MATERIALS SCIENCE↗

Measurement of the Auger parameter and Wagner plot for uranium compounds

In this study, the photoemission from the U 4f{sub 7/2} and 4d{sub 5/2} states and the U N{sub 6}O{sub 45}O{sub 45} and N{sub 67}O{sub 45}V x-ray excited Auger transitions were measured for a range of uranium compounds. The data are presented in Wagner plots and the Auger parameter is calculated to determine the utility of this technique in the analysis of uranium materials. It was demonstrated that the equal core-level shift assumption holds for uranium. It was therefore possible to quantify the relative relaxation energies, and uranium was found to have localized core-hole shielding. The position of compounds within the Wagner plot made it possible to infer information on bonding character and local electron density. The relative ionicity of the uranium compounds studied follows the trend UF{sub 4} > UO{sub 3} > U{sub 3}O{sub 8} > U{sub 4}O{sub 9}/U{sub 3}O{sub 7} Almost-Equal-To UO{sub 2} > URu{sub 2}Si{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-Pt core-shell nanostructured catalyst prepared by selective chemical vapor pulse deposition of Pt on Co as a cathode in polymer electrolyte fuel cells

A new type of PtCo/C catalyst for use as a cathode in polymer electrolyte fuel cells was prepared by selective chemical vapor pulse deposition (CVPD) of Pt on the surface of Co. The activity of the prepared catalyst for oxygen reduction was higher than that of a catalyst prepared by sequential impregnation (IMP) with the two metallic components. This catalytic activity difference occurs because the former catalyst has smaller Pt crystallites that produce stronger Pt-Co interactions and have a larger Pt surface area. Consequently, the CVPD catalyst has a great number of Co particles that are in close contact with the added Pt. The Pt surface was also electronically modified by interactions with Co, which were stronger in the CVPD catalyst than in the IMP catalyst, as indicated by X-ray diffraction, X-ray photoemission spectroscopy, and cyclic voltammetry measurements of the catalysts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of morphology and structure of Pb thin films grown by pulsed laser deposition at different substrate temperatures

Pb thin films were prepared by pulsed laser deposition on a Si (100) substrate at different growth temperatures to investigate their morphology and structure. The morphological analysis of the thin metal films showed the formation of spherical submicrometer grains whose average size decreased with temperature. X-ray diffraction measurements confirmed that growth temperature influences the Pb polycrystalline film structure. A preferred orientation of Pb (111) normal to the substrate was achieved at 30 °C and became increasingly pronounced along the Pb (200) plane as the substrate temperature increased. These thin films could be used to synthesize innovative materials, such as metallic photocathodes, with improved photoemission performances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of Sr silicate buffer layer on Si(100) substrate by pulsed laser deposition using a SrO target

The authors fabricated 2 × 1 Sr-reconstructed Si(100) substrates using thin SrO layers, and used them to direct growth of crystalline perovskite oxide on Si. The SrO layers used to reconstruct the Si(100) substrates were grown by pulsed laser deposition from a SrO single crystal target, followed by postdeposition-annealing (PDA) of the SrO/Si(100) structure. In situ observations of reflective high-energy electron diffraction during PDA confirmed a 2 × 1 reconstruction of the Si surface and x-ray photoemission spectroscopy of the annealed samples confirmed the existence of Sr atoms in a silicate phase, which indicated that a 2 × 1 Sr-reconstructed Si surface was achieved. The optimal fabrication conditions were annealing at 720 °C for 1 min and an equivalent SrO layer thickness (ML{sub eq}) of 2.5 ML{sub eq}. The temperature condition was very narrow, at 720 ± 20 °C, for an acceptable product. Subsequently, the authors demonstrated the growth of crystalline SrTiO{sub 3} films on the 2 × 1 Sr-reconstructed Si(100) surfaces.

36 MATERIALS SCIENCE↗