Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

CdB{sub 10}O{sub 14}(OH){sub 4}·H{sub 2}O with an unprecedented decaborate fundamental building block

Graphical abstract: Display Omitted Highlights: ► CdB{sub 10}O{sub 14}(OH){sub 4}·H{sub 2}O is prepared by boric acid flux method. ► Its structure is solved by single-crystal X-ray diffraction in space group P2{sub 1}/n. ► It possesses an unprecedented decaborate fundamental building block B{sub 10}O{sub 20}. ► Structure features are discussed in detail and compared with other polyborates. -- Abstract: CdB{sub 10}O{sub 14}(OH){sub 4}·H{sub 2}O has been synthesized under boric acid flux condition and characterized by single-crystal X-ray diffraction, infrared spectra, and UV–vis reflectance spectroscopy. It crystallizes in the monoclinic space group P2{sub 1}/n with a = 7.7277(8), b = 18.95(2), c = 9.8616(10) Å, β= 91.454(1)°, V = 1443.7(3) Å. The structure consists of [B{sub 10}O{sub 16}(OH){sub 4}] layers of 9-membered borate rings enclosing Cd{sup 2+} cations. Adjacent borate layers are interconnected via hydrogen bonding to form a 3D network. It possesses an unprecedented decaborate fundamental building block B{sub 10}O{sub 20}. The structure details are discussed together with Sr[B{sub 6}O{sub 9}(OH){sub 2}]·3H{sub 2}O, Pb[B{sub 8}O{sub 11}(OH){sub 4}], Pr[B{sub 8}O{sub 11}(OH){sub 5}], and Nd[B{sub 9}O{sub 13}(OH){sub 4}]·H{sub 2}O, which have correlated FBBs. The band structure calculations show its direct energy band gap of ∼4.68 eV, in consistent with the estimated value (4.77 eV) from UV–vis. In addition, dielectric constants and refractive indexes are also calculated.

36 MATERIALS SCIENCE↗

Grain size effects on dielectric properties of barium strontium titanate composite ceramics

Graphical abstract: The tunability (T) and quality factor (Q) were found to be strongly dependent on the grain sizes. With increasing the grain size, the tunability significantly decreased. In contrary, the quality factor (Q) at microwave frequencies increased with increasing grain size. A moderate tunability while maintaining a high Q value is still realizable for composite ceramics when grain sizes were controlled to a suitable region A (from 6.5 to 15.0 μm). Highlights: ► The tunability (T) and quality factor (Q) were found to be strongly dependent on the grain sizes. ► With increasing the grain size, the tunability significantly decreased, while the quality factor Q at microwave frequencies increased. ► A moderate tunability while maintaining a high Q value is realizable for composites with grain sizes from about 6.5 to 15.0 μm. - Abstract: Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}–Mg{sub 2}TiO{sub 4} composite ceramics with different grain sizes were prepared by three sintering methods. The dielectric constant dependences of temperature and frequency showed an increased degree of diffuseness of the Curie peaks as the grain sizes decreased. The tunability (T) and quality factor (Q) were found to be strongly dependent on the grain sizes. The tunability significantly decreased with increasing the grain size. In contrary, the quality factor (Q) at microwave frequencies increased with increasing grain size. A moderate tunability while maintaining a high Q value is still realizable for composite ceramics with grain sizes from about 6.5 to 15.0 μm.

36 MATERIALS SCIENCE↗

Improvement of the physical properties of novel (1 − y) Co{sub 0.8}Cu{sub 0.2}Fe{sub 2}O{sub 4} + (y) SrTiO{sub 3} nanocomposite

Graphical abstract: The ME coefficient as a function of magnetic field for the composites (1 − y) Co{sub 0.8}Cu{sub 0.2}Fe{sub 2}O{sub 4} + (y) SrTiO{sub 3} (y = 40, 50, 60 and 80%). Highlights: ► T{sub C} and M{sub s} decrease with the increase of SrTiO{sub 3} concentration. ► The P–E hysteresis loops were observed for all compositions. ► The maximum ME coefficient was observed for the composite with 60% SrTiO{sub 3}. - Abstract: Magnetoelectric (ME) nanocomposites (1 − y) Co{sub 0.8}Cu{sub 0.2}Fe{sub 2}O{sub 4} + (y) SrTiO{sub 3} (y = 40, 50, 60, 80 and 100%) were prepared by standard ceramic method. Phase formation was checked using X-ray diffraction analysis. Both saturation magnetization (M{sub s}) and Curie temperature (T{sub C}) decrease with increasing SrTiO{sub 3} content. Temperature dependence of the dielectric constant reveals two maxima, one about 550 K corresponds to non-stoichiometry and lattice distortions while the second around 900 K corresponds to the Curie temperature (T{sub C}). The large value of ME output is due to the strain induced by lattice distortion in the ferrite phase by Jahn–Teller ions like Cu. Hence, Jahn–Teller effect in the ferrite leads to polarization in the piezoelectric phase.

36 MATERIALS SCIENCE↗

Structure and dielectric properties of Ba{sub 5}NdCu{sub 1.5}Nb{sub 8.5}O{sub 30−δ} tungsten bronze ceramics

Highlights: ► Tetragonal tungsten bronze ceramic Ba{sub 5}NdCu{sub 1.5}Nb{sub 8.5}O{sub 30−δ} was prepared. ► Titanium was replaced by copper in M{sub 5}RTi{sub 3}Nb{sub 7}O{sub 30} for the first time. ► Detailed structural information was retrieved by Rietveld refinement. ► An obvious relaxor-like dielectric behavior was observed in this ceramic, ion disorders in A1 and B sites contribute to this behavior. - Abstract: A new type of tungsten bronze ceramic Ba{sub 5}NdCu{sub 1.5}Nb{sub 8.5}O{sub 30−δ} has been prepared by a conventional solid-state reaction technique. Its structural, dielectric properties were investigated. Rietveld analysis shows that Ba{sub 5}NdCu{sub 1.5}Nb{sub 8.5}O{sub 30−δ} has a single-phase tetragonal (space group P4bm and lattice constants a = b = 12.4961(4) Å, c = 3.9426(8) Å, V = 615.66(4) Å{sup 3}) tungsten bronze structure. The occupations of sites A and B are quite interesting. A1 sites are fully disordered occupied by Ba ions and Nd ions and A2 sites for Ba ions only, while B-sites are equal for both Cu and Nb ions to occupy. This material exhibits an obvious relaxation behavior in the 213–573 K temperature range. The dielectric constants have been fitted by the modified Curie–Weiss law and all the estimated γ values are close to 2, confirming the typical relaxor ferroelectric behavior. The disorders of Ba{sup 2+} or Nd{sup 3+} in A1 sites and Nb{sup 5+}, Cu{sup 2+} in B sites induced by the oxygen vacancies may contribute to this dielectric behavior.

36 MATERIALS SCIENCE↗

Microstructure, magnetic and electric properties of BaTiO{sub 3}–Ni{sub 0.5}Zn{sub 0.5}Fe{sub 1.5}Cr{sub 0.5}O{sub 4} nanocomposite

Highlights: ► BaTiO{sub 3}/Ni{sub 0.5}Zn{sub 0.5}Fe{sub 1.5}Cr{sub 0.5}O{sub 4} nanocomposites were synthesized by the sol–gel method. ► A large induced strain is induced in the composite. ► The ferroelectric phase transition dependence on the amount of ferrite. - Abstract: xBaTiO{sub 3} + (1 − x)Ni{sub 0.5}Zn{sub 0.5}Fe{sub 1.5}Cr{sub 0.5}O{sub 4} (x = 0.35, 0.5, 0.65) nanocomposites were synthesized by the sol–gel method. The two corresponding intended nanocomposites phases were confirmed by X-ray diffraction, no other foreign phases were present. The microstrain of the nanocomposite was found to depend on the ratio amount of BaTiO{sub 3} (BTO) in the nanocomposites. The tetragonality ratio c/a of BTO approximates its values to be (a = c) at concentration of 65% BTO. Magnetic properties showed superparamgnetic behavior at room temperature. The temperature dependent of dielectric constant measurements showed that the Curie temperature (T{sub c}) of the ferroelectric phase transition varies with different composites ratio. The dielectric properties of the composite increased with increase of ferrite content. The compressed stress generated by the lattice mismatch of the in planes at the interface of the ferroelectric and magnetic phases cause large strain. The mediation of this strain causes strong electromagnetic coupling creating new materials with good quality.

36 MATERIALS SCIENCE↗

Structure and microwave dielectric properties of Ba{sub 3}(VO{sub 4}){sub 2}–Zn{sub 2−x}SiO{sub 4−x} ceramic composites

Highlights: ► New Ba{sub 3}(VO{sub 4}){sub 2}–Zn{sub 1.87}SiO{sub 3.87} microwave dielectric composite ceramic was reported. ► The single-phase willemite was obtained by controlling of ZnO deficiency. ► The composite with 40 wt% Zn{sub 1.87}SiO{sub 3.87} exhibited excellent τ{sub f} value of 0.4 ppm/°C. - Abstract: Microwave dielectric ceramic composites with compositions of (1 − y)Ba{sub 3}(VO{sub 4}){sub 2}–yZn{sub 2−x}SiO{sub 4−x} (y = 0.4–0.6, x = 0.13) have been prepared by firing mixtures of Ba{sub 3}(VO{sub 4}){sub 2} and Zn{sub 1.87}SiO{sub 3.87}. The X-ray diffraction (XRD) analysis revealed that Zn{sub 2}SiO{sub 4} with a willemite phase can be obtained by appropriately controlling the ZnO deficiency. The starting Zn{sub 1.87}SiO{sub 3.87} powder should be thus composed of the ZnSiO{sub 4} crystal phase and redundant SiO{sub 2} amorphous phase at room temperature. The scanning electron microscopy studies demonstrated the coexistence of Zn{sub 2}SiO{sub 4} and Ba{sub 3}(VO{sub 4}){sub 2} phases in the sintered bodies, as further confirmed by the XRD and Raman results. The near-zero temperature coefficients of the resonant frequency (τ{sub f}) could be achieved by adjusting the relative content of the two phases owing to their opposite τ{sub f} values. The existence of a slight amount of secondary phases, element interdiffusion and non-stoichiometry such as Zn deficiency altogether made the predicted property values deviate from the experimentally measured ones. The composite ceramics with 40 wt% Zn{sub 1.87}SiO{sub 3.87} sintered at 1100 °C exhibited desirable microwave dielectric properties of the quality factor Q × f ∼ 23,000 GHz, dielectric constant ε{sub r} ∼ 9.3, and τ{sub f} ∼ 0.4 ppm/°C.

36 MATERIALS SCIENCE↗

Structure and dielectric properties of La{sub x}Hf{sub (1−x)}O{sub y} thin films: The dependence of components

Graphical abstract: - Highlights: • La{sub x}Hf{sub (1−x)}O{sub y} thin films were grown by pulse laser deposition method. • The thin film with 10% La/(La + Hf) atom ratio forms a cubic HfO{sub 2} phase. • The amorphous thin films due to more La introduced have almost same local structure. • The main infrared phonon modes move to lower frequency for the amorphous thin films. • The static dielectric constants of the amorphous thin films increase with La content. - Abstract: La{sub x}Hf{sub (1−x)}O{sub y} (x = 0, 0.1, 0.3, 0.5, 0.7, y=2−(1/2)x) thin films were grown by pulsed laser deposition (PLD) method. The component dependence of the structure and vibration properties of these thin films is studied by combining X-ray diffraction, X-ray absorption fine structure (XAFS) and infrared spectroscopy. The thin film with 10% La/(La + Hf) atom ratio forms a cubic HfO{sub 2} phase and it has the largest static dielectric constant. More La atoms introduced cause amorphous phase formed and the static dielectric constants increase with the La content. Although XAFS indicates that these amorphous thin films have almost same local structures, the infrared phonon modes with most contribution to the static dielectric constant move to lower frequency, which results in the component dependence of the dielectric constant.

36 MATERIALS SCIENCE↗

Characterization and antibacterial properties of stable silver substituted hydroxyapatite nanoparticles synthesized through surfactant assisted microwave process

Highlights: • Stable nano sized silver substitute hydroxyapatite is prepared under surfactant assisted microwave process at 600 W power for 7 min. • The nanoparticles are in the size range of 58–72 nm and exert uniform elongated spheroid morphology. • Increase in silver concentration resulted in better dielectric properties. • Good antibacterial activity and silver release. - Abstract: The present study reports a relatively simple method for the synthesis of stable silver substituted hydroxyapatite nanoparticles with controlled morphology and particle size. In order to achieve this, CTAB is included as a surfactant in the microwave refluxing process (600 W for 7 min). The nanoparticles produced with different silver ion concentrations (0.05, 0.1 and 0.2 wt%) were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscope (FESEM), energy dispersive X-ray (EDX) and Brunauer–Emmett–Teller (BET) analysis. XRD and FTIR analyses reveal that the Ag-HA nanoparticles were phase pure at 1000 °C. FESEM images showed that the produced nanoparticles are in the size range of 58–72 nm and exert uniform elongated spheroid morphology. The dielectric properties suggest that the increase in dielectric constant (ε′) and dissipation factor (D) values with increasing Ag concentrations. Antibacterial performance of the Ag-HA samples elucidated using disk diffusion technique (DDT) and minimum inhibitory concentration (MIC) demonstrates anti-bacterial activity against Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa and Escherichia coli. This effect was dose dependent and was more pronounced against Gram-negative bacteria than Gram-positive organisms.

36 MATERIALS SCIENCE↗

Dielectric and photocatalytic properties of sulfur doped TiO{sub 2} nanoparticles prepared by ball milling

Graphical abstract: - Highlights: • Designing of visible light responsive photocatalyst utilizing ball milling. • Sulphur used as dopant in commercial TiO{sub 2} P25 at different atomic percentage. • S doping resulted in an intense increase in absorption in the visible light region. • Newly design photocatalyst exhibited excellent photocatalytic performance. • 0.11 at.% S-doped TiO{sub 2} shows 3-times higher activity than that of TiO{sub 2} P25. - Abstract: Sulfur (S) doped commercial TiO{sub 2} P-25 has been achieved by changing the amount of thiourea using ball milling technique. The results of XRD clearly reveal biphasial anatase and rutile mixtures for all prepared samples and doping of S does not change the morphology of the TiO{sub 2}. The optical absorption edge of S-doped TiO{sub 2} was red shifted with indirect bandgap energy of 2.8 eV. The dielectric studies confirm that the dielectric constant of TiO{sub 2} increases after doping, however it becomes more conductive. Newly designed S-doped TiO{sub 2} photocatalysts exhibited excellent photocatalytic performance for the degradation of methylene blue (MB) under visible light. The overall photocatalytic activity of 0.11 at.% S-doped TiO{sub 2} was significantly 3-times higher than that of commercial TiO{sub 2} P-25 and complete degradation of MB has taken place after 90 min of irradiation under visible light while only 35% dye degraded when the reaction has been carried out in the presence of undoped TiO{sub 2}.

36 MATERIALS SCIENCE↗

Structure and ferroelectric studies of (Ba{sub 0.85}Ca{sub 0.15})(Ti{sub 0.9}Zr{sub 0.1})O{sub 3} piezoelectric ceramics

Graphical abstract: - Highlights: • (Ba{sub 0.85}Ca{sub 0.15})(Ti{sub 0.9}Zr{sub 0.1})O{sub 3} (BCTZO) ceramic was synthesized by the ceramic method. • In situ XRD and Raman spectra showed the phase transition of BCTZO around 360 K. • The ceramics showed a tunability of 82% at 40 kV cm{sup −1} electric field. • BCTZO exhibited good quality factor of 111 at microwave frequencies. • Piezoforce microscopy studies indicated the switchability of ferroelectric domains. - Abstract: We have synthesized and studied the structural and ferroelectric properties of lead-free 0.5(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3}–0.5Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3} ceramics in the temperature region of its ferroelectric transition. The synthesized material showed high dielectric constant, low loss and good pyroelectric figure of merit. From the temperature dependent X-ray diffraction measurements, we determined the tricritical point to be in the temperature range of 303–400 K. The dielectric measurements indicate a diffuse ferroelectric phase transition (DPT) around 360 K in agreement with the X-ray measurements. We studied the evolution of Raman spectra with temperature to understand the nature of phase transition in BaTiO{sub 3} (BTO) and the BCTZO. The results indicates that the transition of ferroelectric–paraelectric state is not sharp as in the case of BTO and the polar state persists through the paraelectric state. In general, our study indicates that there are ferroelectric domains of nanometer size beyond the commonly defined transition temperature. The observation of local piezoelectric hysteresis loop indicated the existence of intrinsic ferroelectric property of the ceramic at the nanoscale. The ceramics exhibited electric field tunable dielectric properties with a tunability of 82% at an applied DC field of 40 kV cm{sup −1}, low dielectric loss of 0.001 and room temperature pyroelectric coefficient of 6 × 10{sup −8} C cm{sup −2} K{sup −1} and the detectivity of 1.9 × 10{sup −8} C cm{sup −1} J{sup −1}; larger than those reported for other BaTiO{sub 3}-based materials. Overall, our results indicate that BCTZO ceramics with coexistence of rhombohedral–tetragonal phases is a promising candidate for lead-free ferroelectric applications.

36 MATERIALS SCIENCE↗

Dielectric, ferromagnetic and maganetoelectric properties of BaTiO{sub 3}–Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} composite ceramics

Graphical abstract: - Highlights: • The lead-free ME ceramic composites BaTiO{sub 3}–Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} were successfully synthesized. • The composites showed high dielectric constant and low dielectric loss. • The composite with 30% NiZn ferrite presented good soft magnetic properties and ME performance. - Abstract: Lead-free magnetoelectric composite ceramics (1 − x)BaTiO{sub 3}–xNi{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} (x = 0.15, 0.3, 0.45) were successfully prepared by conventional oxide ceramic process. The tetragonal perovskite BaTiO{sub 3} and cubic spinel Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} were confirmed by X-ray diffraction. The dielectric behaviors of all composite samples show a normal response to the increasing measurement frequency and Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} ferrite content. Well defined ferromagnetic hysteresis loops and obvious magnetoelectric coupling effect are observed in the composite ceramics. The influence of applied dc bias magnetic field and Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} ferrite content on the magnetoelectric coupling responding voltage is investigated. The strongest peak magnetoelectric coupling voltage coefficient is 124 μV/cm Oe when x = 0.3, which corresponds to the maximum magnetoelectric coupling responding voltage of 200 μV.

36 MATERIALS SCIENCE↗

Structural, electrical and dielectric properties of spinel nickel ferrite prepared by soft mechanochemical synthesis

Graphical abstract: - Highlights: • Sintered NiFe{sub 2}O{sub 4} was prepared by a soft mechanochemical route from mixture powders. • XRD and Raman measurements indicate that the prepared samples have spinel structure. • The activation energy ΔE are 0.653 and 0.452 eV for NiFe{sub 2}O{sub 4} samples. • Ferrite from Ni(OH){sub 2}/Fe{sub 2}O{sub 3} has lower DC conductivity than from Ni(OH){sub 2}/Fe(OH){sub 3} powders. • The values of dielectric constant of samples NiFe{sub 2}O{sub 4} are 70 and 200, respectively. - Abstract: Nickel ferrite, NiFe{sub 2}O{sub 4} was prepared by a soft mechanochemical route from a mixture of (1) Ni(OH){sub 2} and α-Fe{sub 2}O{sub 3} and (2) Ni(OH){sub 2} and Fe(OH){sub 3} powders in a planetary ball mill for 25 h. The powder samples were sintered at 1100 °C for 2 h and were characterized by X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscopy (SEM). Impedance spectroscopy techniques were used to study the effect of grain and grain boundary on the electrical properties of the prepared samples. A difference in dielectric constant (ε) and dielectric loss tangent (tan δ) of NiFe{sub 2}O{sub 4} samples obtained by the same methods but starting from different initial components was observed.

36 MATERIALS SCIENCE↗

Influence of Ga{sup 3+} ions on spectroscopic and dielectric features of multi component lithium lead boro bismuth silicate glasses doped with manganese ions

Graphical abstract: The plots between ε″(ω)ω vs. ε′(ω) and ε″(ω)/ω vs. ε′(ω) yield straight lines with slope 1/τ and τ, respectively. Considerable deviation from the straight line is observed in the high frequency region. Such deviation suggests spreading of relaxation times and this is attributed to the presence of multiple type of dipoles in the glass matrix. Variation of the parameters ωε″(ω) and ε″(ω)/ω with ε′(ω) of glass Li{sub 2}O–PbO–B{sub 2}O{sub 3}–SiO{sub 2}–Bi{sub 2}O{sub 3}–MnO multi-component glasses mixed with 2.0 mol% of Ga{sub 2}O{sub 3} measured at 373 K. - Highlights: • A series of Li{sub 2}O–PbO–B{sub 2}O{sub 3}–SiO{sub 2}–Bi{sub 2}O{sub 3}–MnO:Ga{sub 2}O{sub 3} glasses have been synthesized. • A variety of spectroscopic and dielectric properties have been investigated. • Analysis of the results indicated that glasses with below 3.0 mol% Ga{sub 2}O{sub 3} are good conducting materials. - Abstract: Multi-component glasses of the chemical composition 19.5Li{sub 2}O–20PbO–20B{sub 2}O{sub 3}–30SiO–(10 − x)Bi{sub 2}O{sub 3}–0.5MnO:xGa{sub 2}O{sub 3} with 0 ≤ x ≤ 5.0 have been synthesized. Spectroscopic (optical absorption, IR, Raman and ESR) and dielectric properties were investigated. Optical absorption and ESR spectral studies have indicated that managanese ions do exist in Mn{sup 3+} state in addition to Mn{sup 2+} state in the samples containing low concentration of Ga{sub 2}O{sub 3}. The IR and Raman studies indicated increasing degree of disorder in the glass network with the concentration of Ga{sub 2}O{sub 3} up to 3.0 mol%. The dielectric constant, loss and ac conductivity are observed to increase with the concentration of Ga{sub 2}O{sub 3} up to 3.0 mol%. The quantitative analysis of the results of dielectric properties has indicated an increase in the insulating strength of the glasses as the concentration of Ga{sub 2}O{sub 3} is raised beyond 3.0 mol%. This has been attributed to adaption of gallium ions from octahedral to tetrahedral coordination.

36 MATERIALS SCIENCE↗

Synthesis, electrical and dielectric characterization of cerium doped nano copper ferrites

Graphical abstract: Lattice constant (a) and activation energy (Ea) as a function of Ce (cerium) content. - Highlights: • The simple and economic method has been adopted for the synthesis of nanoferrites. • The electrical resistivity increases with cerium concentration. • DC electrical resistivity of these materials favours their use in microwave devices. • Dielectric measurements show semiconductor nature of the synthesized ferrites. - Abstract: The nanosized CuFe{sub 2−x}Ce{sub x}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8) ferrites doped with cerium are synthesized by chemical co-precipitation method. The synthesized materials are characterized by XRD, FTIR, TGA and SEM. XRD analysis of cerium substituted copper ferrites confirms the cubic spinel structure. The average crystallite size calculated by using Scherrer's formula ranges from 37 to 53 nm. The values of cell constant and cell volume vary with the dopant concentration. These variations can be explained in terms of their ionic radii. The DC electrical resistivity, measured by two point probe method, increases with increase in dopant concentration while it decreases with rise in temperature exhibiting semiconductor behaviour. Energy of activation of these ferrites is calculated by using Arrhenius type resistivity plots. Dielectric measurements of the synthesized compounds show exponential decrease in dielectric constant and dielectric loss factor with increase in frequency. This indicates the normal dielectric behaviour of ferrites.

36 MATERIALS SCIENCE↗

Capacitance and conductance characterization of nano-ZnGa{sub 2}Te{sub 4}/n-Si diode

Graphical abstract: - Highlights: • XRD and DTA micrographs were used to study the structure of ZnGa{sub 2}Te{sub 4}. • C–V, G–V and R{sub s}–V of the diode characteristics have been analyzed for the first time. • Dielectric constant, dielectric loss, loss tangent and ac conductivity were determined. • The interfaces states were determined using conductance–voltage technique. • ZnGa{sub 2}Te{sub 4} is a good candidate for electronic device applications. - Abstract: Capacitance–voltage (C–V) and conductance–voltage (G–V) characteristics of p-ZnGa{sub 2}Te{sub 4}/n-Si HJD were studied over a wide frequency and temperature. Both the interface states density N{sub ss} and series resistance R{sub s} were strongly frequency and temperature dependent. The interface states density N{sub ss} is decreased with increasing frequency and increase with increasing temperature. The values of the built-in potential (V{sub bi}) were calculated and found to increase with increasing temperature and frequency. The values of capacitance C, conductance G, series resistance R{sub s}, corrected capacitance C{sub ADJ}, corrected conductance G{sub ADJ}, dielectric constant (ε′), dielectric loss (ε″), loss tangent (tan δ) and the AC conductivity (σ{sub ac}) are strongly dependent on the applied frequency, voltage and temperature. The obtained results show that the locations of N{sub ss} and R{sub s} have a significant effect on the electrical characteristics of the studied diode.

36 MATERIALS SCIENCE↗

Structural and dielectric properties of yttrium substituted nickel ferrites

Graphical abstract: - Highlights: • Dense NiFe{sub 2−x}Y{sub x}O{sub 4} ceramics (with 0 ≤ x ≤ 0.3) were prepared. • Pure spinels were obtained for x ≤ 0.07 while for x ≥ 0.15 samples had secondary phases. • With addition of yttrium, ac conductivity slightly increased. • We suggest several effects that can explain the observed changes in ac conduction. • With addition of yttrium, dielectric constant increased while the tg δ decreased. - Abstract: The influence of Y{sup 3+} ions on structural and dielectric properties of nickel ferrites (NiFe{sub 2−x}Y{sub x}O{sub 4}, where 0 ≤ x ≤ 0.3) has been studied. The as-synthesized samples, prepared by the co-precipitation method, were analyzed by XRD and FTIR which suggested that Y{sup 3+} ions were incorporated into the crystal lattice for all the samples. However, the XRD analysis of the sintered samples showed that secondary phases appear in the samples with x > 0.07. The samples have densities greater than 90% TD and the SEM images showed that the grain size decreases with the addition of yttrium. Dielectric properties measured from 150 to 25 °C in the frequency range of 100 Hz–1 MHz showed that the addition of yttrium slightly increases the ac conductivity and decreases the tg δ therefore making the materials better suited for the use in microwave devices.

36 MATERIALS SCIENCE↗

Comparison of structural and electrical properties of Co{sup 2+}doped Mn-Zn soft nano ferrites prepared via coprecipitation and hydrothermal methods

Graphical abstract: - Highlights: • Coprecipitation and hydrothermal synthesis of Co{sup 2+} doped Mn-Zn ferrites. • Dielectric measurements at 3 MHz and 1 GHz frequencies. • Enhanced DC electrical resistivity for samples prepared from hydrothermal technique. • Impedance studies for the prepared samples showing major contribution due to grains. - Abstract: A series of Co doped Mn-Zn ferrites compounds with the formula Mn{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.15, 0.25, 0.35 and 0.50) were successfully synthesized by polyethylene glycol-assisted coprecipitation and hydrothermal methods. The structural characterization of the samples was done using X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). All the samples found to have cubic spinel structure. The average crystallite size of all nanoparticles were estimated using Scherrer's formula and found to lie between 10 and 25 ± 3 nm with small size distribution of particles prepared by hydrothermal method. The FTIR spectrum showed two absorption bands of tetrahedral and octahedral metal-oxygen sites. DC electrical resistivity varied from 4.12 × 10{sup 7} to 8.32 × 10{sup 10} ohm cm with cobalt doping. The dielectric measurements were performed from 20 Hz to 3 MHz and from 1 MHz to 1 GHz frequency ranges. The value of dielectric constant (ε′) varies from 15.54 to 106.25 (1 MHz) and 6.73–16.48 (1 GHz) for all the samples at room temperature. Impedance spectroscopy was carried out from 20 Hz to 3 MHz, at room temperature to study the grains and grain boundaries effect.

36 MATERIALS SCIENCE↗

Effect of Eu–Ni substitution on electrical and dielectric properties of Co–Sr–Y-type hexagonal ferrite

Graphical abstract: - Highlights: • Single phase nanostructured Sr{sub 2}Co{sub 2−x}Ni{sub x} Eu{sub y}Fe{sub 12−y}O{sub 22} were synthesized by the microemulsion method. • The materials show semiconducting behavior. • The high resistivity makes these materials useful for high frequency applications. • The Curie temperature decreases with the substituents. - Abstract: Single phase nanostructured Eu–Ni substituted Y-type hexaferrites with nominal composition Sr{sub 2}Co{sub 2−x}Ni{sub x} Eu{sub y}Fe{sub 12−y}O{sub 22} (x = 0.0–1, y = 0.0–0.1) were synthesized by the normal microemulsion method. X-ray diffraction (XRD) technique was employed for phase analysis and indexing of each pattern corroborates that well defined Y-type crystalline phase is formed. It is observed that DC resistivity enhanced which is accredited to room temperature resistivity differences of dopant and host ions. The hopping of electrons and jumping of holes are responsible for conduction below Curie temperature (T{sub C}), whereas above Curie temperature is due to polaron hopping. The decrease in T{sub C} may be due to the fact that Eu–Fe interactions on the B sites are weaker than Fe–Fe interaction. The dispersion in the dielectric constant ε′(f) favor the occurrence of peaks in the tan δ(f). The extraordinary values of resistivity and small dielectric loss make these materials pre-eminent contestant for high frequency applications.

36 MATERIALS SCIENCE↗