Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTNERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Treatment of Produced Water from Carbon Sequestration Sites for Water Reuse and Mineral Recovery

Southern Research along with Advanced Resources International, Inc. (ARI), Heartland Technology Partners, LLC (Heartland), New Logic Research, Inc. (New Logic), and Mr. Michael N. DiFilippo, Consultant developed a concept for an on-site strategy and design for management of produced water from CO 2 sequestration sites for maximum water reuse. When CO 2 is injected into deep saline aquifers, it may be necessary to produce water from the reservoir to reduce reservoir pressure. The New Logic Research, vibratory shear enhanced process (VSEP) membrane technology, and Heartland Technology Partners, low momentum-high turbulence (LM-HT) evaporation technology was selected for evaluation for treating this produced water from a 530 MW natural gas combined cycle (NGCC) power plant by utilizing waste heat from the plant to drive the evaporation process. The technology was also evaluated for application to a coal-fired power plant in lieu of the NGCC power plant. The results from the project show that the application of the proposed technology to the 530 MW NGCC power plant scenario could be feasible. The results indicate that formation water TDS has a very large impact on the technical and economic feasibility of the process. One advantage of formations with low TDS water is that the VSEP membrane can be utilized to pre-concentrate the produced water upstream of the LM-HT. The results indicate that a significant portion of the exhaust gas from the NGCC power plant will have to be utilized to provide waste heat for the LM-HT evaporator; however, less will be required with low-TDS formation water. The CAPEX costs for LM-HT for all three formations (97.8USD to 122.7USD MM/year) and VSEP plus LM-HT (106.6USD MM/year) for the Keg River formation is high in cost but lower than all technology compared including crystallization, VSEP plus crystallization, FO plus LM-HT, VCE plus LM-HT, and VCE plus crystallization. The OPEX for the LM-HT for all three formations (6.33USD to 7.97USD MM/year) and VSEP plus LM-HT (13.29USD MM/year) for the Keg River formation is lower than crystallization, VSEP plus crystallization, FO plus LM-HT, and FO plus crystallization. Only VCE plus LM-HT and VCE plus crystallization have a comparable OPEX costs to LM-HT for all three formation and VSEP plus LM-HT for the Keg River formation. The coal-fired power plant comparison showed that it is not feasible to apply the technology to that type of fossil fuel plant.

04 OIL SHALES AND TAR SANDS↗

Knowledge Transfer Project: Cultivating Smart Energy Solutions through Dynamic Peer-to-Peer Learning

As energy policy makers and professionals convene in the Oresund region for the 9th Annual Clean Energy Ministerial (CEM9), the global community is as united as ever around the common goal of accelerating the transition to global clean energy. Through sustained collective effort and thought leadership, CEM partners and stakeholders are systematically addressing the barriers to the widescale deployment of clean energy technologies. Pivotal to their progress is the efficient sharing and dissemination of knowledge. To address that need, the CEM-initiative International SmartGrid Action Network (ISGAN) launched the Knowledge Transfer Project (KTP) in March 2016 to capture, collect, and share knowledge about smart grid technologies among countries and key stakeholders. Building on ISGAN's experience with delivering deep-dive workshops, the KTP fosters meaningful international dialogue on smart grids with a focus on developing competence and building capacity. After a successful 2016 pilot project and two consecutive projects, each with a different focus and structure, the KTP has become an established practice that can support existing ISGAN or CEM initiatives. To accommodate different purposes, needs, and practical circumstances, ISGAN has adopted three basic models for delivering KTP workshops: Country-Centric, Multilateral, and Hybrid. This fact sheet describes each approach through case studies of workshops in Mexico, India, and Belgium, and invites new ideas and partners for future KTPs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Development of a Lightweight Silicon Pixel Detector for CMS to Search for New Physics in the Top Quark Sector

The discovery of a Higgs boson at the Large Hadron Collider (LHC) is one of the greatest achievements of experimental particle physics and a triumph for theoretical physics, which culminates in the very successful standard model (SM). Currently the LHC collider provides particle collisions at highest possible energies of $\sqrt{s}=13$ TeV, opening a new energy domain. Little Higgs models predict a heavy top quark partner, T, which would cancel the aforementioned top quark loop contributions to the Higgs boson mass. This particle is predicted to have a mass near the TeV scale. We search for a "vector-like" top partner which is an electroweak singlet and has vector couplings to W and Z bosons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Communities of the Future: Accelerating Zero Energy District Master Planning: Preprint

Zero energy districts aggregate multiple buildings and optimize energy efficiency, district thermal energy, and renewable energy generation among those buildings so that on-site renewable energy can offset the energy use at a district scale. Zero energy districts have the potential to dramatically improve the economic competitiveness, resiliency, environmental quality, and energy independence of communities. The U.S. Department of Energy (DOE) Zero Energy Districts Accelerator (ZEDA) brings together district developers, planners, owners, national experts, and key stakeholders to develop the energy master planning documents needed for zero energy district development and replication. Through this effort, DOE is working with pioneering leaders to understand and address barriers to achieving zero energy districts. Each district partner will complete detailed energy master plans that provide the framework necessary to achieve ambitious energy goals. These complex projects represent billions of dollars of investment and are creating the communities of the future. ZEDA partners are using best-practice approaches to realize energy performance goals for the entire building and district life cycle. Their successful strategies will be documented and made available to promote replication in cities around the world that are setting aggressive energy goals. This paper introduces zero energy districts, reviews the structure of ZEDA, discusses the value of energy master planning, presents barriers to zero energy districts and how these are being addressed by zero energy district pioneers, and suggests pathways for wide-scale replication.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advancing the Authenticatable Container Tracking System (ACTS)

The Authenticatable Container Tracking System (ACTS) is an extensible secure container tag that can be used to optimize chain-of-custody monitoring for packaged nuclear materials as they are being stored, processed, and transported. Based on the ultra–low power TI MSP430 mixed-signal microcontroller, ACTS is an active device that uses an almost-universal core platform that can be appropriately configured with expansion modules to provide the application-specific data acquisition, data logging, container sealing, and communications functions needed for 21st century material accountancy, monitoring, and tracking applications. This core architecture enables appropriately designed modules to be easily interfaced to the basic system, providing an integration path for current and new technologies. ACTS contains a built-in set of sensors and supports an expansion bus for up to six additional communications, tracking, authentication, encryption, sealing, location, or sensing modules that may enhance the monitoring and tracking of designated containers for specific applications. To date, testing has used an IEEE 802.15.4-2011 ultra-wideband–compliant wireless transceiver module that has additional capabilities for indoor positioning and proximity location. Proximity-based location (i.e., where an ACTS tag knows where it is relative to other ACTS tags) will be explored as a continuity-of-knowledge mechanism to determine unauthorized movement of containers in storage arrays of many items. Partners for this system are Oak Ridge National Laboratory, Argonne National Laboratory, Savannah River National Laboratory, Pacific Northwest National Laboratory and commercialization partner the Aquila Group.

Younkin, Jim↗

Easy and Enticing: How a Collaborative Approach to Emerging Technology Adoption in the Commercial Building Sector Has Made Its Mark

In 2012, the U.S. Department of Energy (DOE), in collaboration with interested partners (e.g., applicable trade groups), initiated a novel market transformation approach, technology adoption campaigns, to speed the adoption of new technologies that save energy and money in buildings—first with lighting and later with other building technologies. This approach couples technical performance evaluation, guidance, data tracking and technical assistance with recognition for exemplary performance and best practices. Campaigns can be designed around emerging technologies that have significant, cost-effective national energy savings potential and where there is strong public- and private-sector interest in sharing performance criteria and outcomes. Participants in the campaigns share project data with the national laboratories and DOE, benefit from technical support and assistance from objective experts, and highly value recognition for their accomplishments. DOE and its campaign partners benefit from accelerated adoption of new energy-saving technologies and engagement with manufacturers and end users that allows for data collection and insights into technology research needs. This paper documents the success, challenges, lessons learned, and energy and cost savings of lighting campaigns, and in many cases compares these findings with other campaign efforts. This paper also presents recommendations for how other programs of various sizes can employ this model.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Proton-proton and electron-positron collider in a 100 km ring at Fermilab

The discovery of a Higgs-like boson with mass near 126 GeV, at the LHC, has reignited interest in future energy frontier colliders. We propose here a proton-proton (pp) collider in a 100 km ring, with center of mass (CM) energy of ~100 TeV which would have substantial discovery potential for new heavy particles and new physics beyond the Standard Model. In the case that LHC experiments have already found exotic resonances or heavy "partner" particles, this collider could fill out the "tower" of resonances (thus e.g. confirming an extra dimension) or the full suite of partner particles (e.g. for supersymmetry). The high luminosity of the new collider would enable unique precision studies of the Higgs boson (including Higgs self coupling and rare Higgs decays), and its higher energy would allow more complete measurements of vector boson scattering to help elucidate electroweak symmetry breaking. We also discuss an e+e- collider in the same 100 km ring with CM energies from 90 to 350 GeV. This collider would enable precision electroweak measurements up to the ttbar threshold, and serve as a Higgs factory.

43 PARTICLE ACCELERATORS↗

Lessons Learned from U.S. Industry Engagement on Safeguards by Design

Since 2008, the National Nuclear Security Administration, through its Next Generation Safeguards Initiative (NGSI), has supported development of the safeguards by design (SBD) concept. In more recent years, NGSI has made efforts to move the concept of SBD from paper to standard industry practice through engagement with commercial nuclear industry. These partnerships between NGSI and domestic facility designers have represented a unique opportunity to assess and explore the safeguards implementation challenges that emerging reactor designs have the potential to pose. Thus far, partners have included NuScale Power, Babcock & Wilcox mPower, Westinghouse, and TerraPower. This paper reviews engagements with partners to-date, with an emphasis on approaches to engaging commercial industry on SBD and identifying lessons learned from these engagements.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Results of the Phenix Dissymmetric Test Benchmark Exercise

In the context of the European H2020 project SESAME, a work package was dedicated to the validation of code coupling for the thermal-hydraulics of pool type reactors. To this end, CEA proposed a benchmark exercise of the so-called dissymmetric test performed at the end of life of the PHENIX reactor. The PHENIX reactor was an experimental reactor operated by CEA in France from 1974 until 2009. The knowledge and data acquired over the lifetime of this reactor are of paramount importance for the development of future sodium-cooled generation IV reactors. At the beginning of this test, the reactor is operated at nominal power (350 MWth) with 3 primary pumps and 4 intermediate heat exchangers. During this test, a pump trip occurs at the secondary side of one of the two loops (one loop provides coolant to two intermediate heat exchangers). The chain reaction is then stopped while the pumps remain operating at nominal speed. Dissymmetric flow patterns are then observed in the cold pool as hot sodium leaves the intermediate heat exchangers that are no longer cooled. The failed secondary pump is then restarted while the rotational speed of the other is reduced. Eventually, a stable homogeneous state is reached. This transient is challenging for both modelers and codes since this exercise tackles an industrial scale reactor featuring complex flows and interactions between different scales. The physical phenomena observed include thermal stratification, flow mixing and buoyancy effects. In order to accurately model these phenomena for a reasonable computational costs, the partners used System Thermal Hydraulics codes coupled with Computational Fluid Dynamics codes and one even included a subchannel code. In this paper, the PHENIX reactor and its behavior during the dissymmetric test are described. Then, a comparison of the different modeling options selected by the partners is offered. Finally, the results are compared to the experimental data and discussed and modelling recommendations are proposed.

code coupling↗

Communities of the Future: Accelerating Zero Energy District Master Planning

Zero energy districts aggregate multiple buildings and optimize energy efficiency, district thermal energy, and renewable energy generation among those buildings so that on-site renewable energy can offset the energy use at a district scale. Zero energy districts have the potential to dramatically improve the economic competitiveness, resiliency, environmental quality, and energy independence of communities. The U.S. Department of Energy (DOE) Zero Energy Districts Accelerator (ZEDA) brings together district developers, planners, owners, national experts, and key stakeholders to develop the energy master planning documents needed for zero energy district development and replication. Through this effort, DOE is working with pioneering leaders to understand and address barriers to achieving zero energy districts. Each district partner will complete detailed energy master plans that provide the framework necessary to achieve ambitious energy goals. These complex projects represent billions of dollars of investment and are creating the communities of the future. ZEDA partners are using best-practice approaches to realize energy performance goals for the entire building and district life cycle. Their successful strategies will be documented and made available to promote replication in cities around the world that are setting aggressive energy goals. This paper introduces zero energy districts, reviews the structure of ZEDA, discusses the value of energy master planning, presents barriers to zero energy districts and how these are being addressed by zero energy district pioneers, and suggests pathways for wide-scale replication.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Easy and Enticing: How a Collaborative Approach to Emerging Technology Adoption in the Commercial Building Sector Has Made its Mark

In 2012, the U.S. Department of Energy (DOE), in collaboration with interested partners (e.g., applicable trade groups), initiated a novel market transformation approach, technology adoption campaigns, to speed the adoption of new technologies that save energy and money in buildings - first with lighting and later with other building technologies. This approach couples technical performance evaluation, guidance, data tracking and technical assistance with recognition for exemplary performance and best practices. Campaigns can be designed around emerging technologies that have significant, cost-effective national energy savings potential and where there is strong public- and private-sector interest in sharing performance criteria and outcomes. Participants in the campaigns share project data with the national laboratories and DOE, benefit from technical support and assistance from objective experts, and highly value recognition for their accomplishments. DOE and its campaign partners benefit from accelerated adoption of new energy-saving technologies and engagement with manufacturers and end users that allows for data collection and insights into technology research needs. This paper documents the success, challenges, lessons learned, and energy and cost savings of lighting campaigns, and in many cases compares these findings with other campaign efforts. This paper also presents recommendations for how other programs of various sizes can employ this model.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Accelerating Science: A Computing Research Agenda

The emergence of "big data" offers unprecedented opportunities for not only accelerating scientific advances but also enabling new modes of discovery. Scientific progress in many disciplines is increasingly enabled by our ability to examine natural phenomena through the computational lens, i.e., using algorithmic or information processing abstractions of the underlying processes; and our ability to acquire, share, integrate and analyze disparate types of data. However, there is a huge gap between our ability to acquire, store, and process data and our ability to make effective use of the data to advance discovery. Despite successful automation of routine aspects of data management and analytics, most elements of the scientific process currently require considerable human expertise and effort. Accelerating science to keep pace with the rate of data acquisition and data processing calls for the development of algorithmic or information processing abstractions, coupled with formal methods and tools for modeling and simulation of natural processes as well as major innovations in cognitive tools for scientists, i.e., computational tools that leverage and extend the reach of human intellect, and partner with humans on a broad range of tasks in scientific discovery (e.g., identifying, prioritizing formulating questions, designing, prioritizing and executing experiments designed to answer a chosen question, drawing inferences and evaluating the results, and formulating new questions, in a closed-loop fashion). This calls for concerted research agenda aimed at: Development, analysis, integration, sharing, and simulation of algorithmic or information processing abstractions of natural processes, coupled with formal methods and tools for their analyses and simulation; Innovations in cognitive tools that augment and extend human intellect and partner with humans in all aspects of science.

97 MATHEMATICS AND COMPUTING↗

Governance & Management Framework

NNSA’s Strategic Vision identifies our vision for the future, policy direction, and mission priorities, as well as the current challenges that we must overcome. This Governance & Management Framework lays out the path and the tools for NNSA as a team to deliver its mission in a resilient, agile, and responsive manner. This Framework is the how to the Vision’s what and explains how Governance and Management (G&M) serves a key role in managing the nuclear security enterprise. This Framework encompasses the federal headquarters and field office staff, our partner laboratory, plant, and site personnel, and the partners’ corporate parents.

Source record↗

Piloting the Use of Energy Policy Data to Drive Market Action

Information is only useful when put to use. Across the U.S., an ever-growing number of state and local jurisdictions are implementing building performance reporting laws regarding building energy and water use in the commercial and multifamily sectors. This wealth of performance information is not yet being deployed to its full potential to drive smarter business decisions and increase energy savings. Recognizing that this information can help advance energy efficiency in cities, in 2015 the Institute for Market Transformation (IMT) partnered with New York City and the District of Columbia and local groups, NYCEEC and the District of Columbia Sustainable Energy Utility, on a three-year project to understand and document how, exactly, this data can and should be integrated to reap an array of benefits for cities, energy efficiency service providers, utilities, and building owners. This paper examines how local governments, utilities, and program implementers can replicate the success of DC and NYC. It gathers the findings from the Cities’ and their partners’ efforts to fully understand the datasets, overcome integration challenges, and apply the data to visual engagement, strategic outreach, evidence-based policymaking, and retrofit project identification and deployment. The paper goes beyond theoretical discussion by outlining practical application of data using specific examples from NYC and DC, summarizing challenges and findings, and highlighting next steps for other jurisdictions to learn from and build off the work done in those jurisdictions.

Cities↗

Checkpointing using compute node health information

A method is disclosed, as well as an associated apparatus and computer program product, for checkpointing using a plurality of communicatively coupled compute nodes. The method comprises acquiring health information for a first node of the plurality of compute nodes, and determining a first failure probability for the first node using the health information. The first failure probability corresponds to a predetermined time interval. The method further comprises selecting a second node of the plurality of compute nodes as a partner node for the first node. The second node has a second failure probability for the time interval. A composite failure probability of the first node and the second node is less than the first failure probability. The method further comprises copying checkpoint information from the first node to the partner node.

97 MATHEMATICS AND COMPUTING↗

Procurements for LCLS-II Cryomodules at Jlab

The Thomas Jefferson National Accelerator Facility is currently engaged, along with several other DOE national laboratories, in the Linac Coherent Light Source II project (LCLS II). The SRF Institute at Jefferson Lab will be building 1 prototype and 17 production cryomodules based on the TESLA / ILC / XFEL design. Each cryomodule will contain eight nine cell cavities with coaxial power couplers operating at 1.3 GHz. Procurement of components for cryomodule construction has been divided amongst partner laboratories in a collaborative manner. JLab has primary responsibility for six procurements include the dressed cavities, cold gate valves, higher-order-mode (HOM) and field probe feedthroughs, beamline bellows cartridges, cavity tuner assemblies and HOM absorbers. For procurements led by partner laboratories, JLab collaborates and provides technical input on specifications, requirements and assembly considerations. This paper will give a detailed description of plans and status for JLab procurements.

Daly, Edward F.↗

Status of LCLS - II QA Systems Collaboration for Cyromodule Construction at TJNAF and FNAL

At the Thomas Jefferson National Accelerator Facility (JLab), we are supporting the LCLS-II Project at SLAC. The plan is to build thirty-five 1.3 GHz continuous wave cryomodules, production to be split between JLab and FNAL (Fermilab). This has required a close collaboration between the partner labs, including enhancing our existing quality systems to include this collaboration. This over view describes the current status of the Quality System development as of August 2015, when the partner labs start the assembly of the prototype cryomodules.

McEwen, E. Anne↗

Today's Energy Challenges, Tomorrow's Solutions: Electrons to Molecules: Building a New Foundation for Industrial Processes

The vast majority of global goods and materials we use on a daily basis are manufactured from fossil fuel precursors - chemical building blocks strung together using combinations of heat, pressure, and chemical catalysis. NREL, along with energy industry partners, is exploring the use of renewable, affordable electricity as the driving force for the conversion of low-energy molecules - such as water and carbon dioxide (CO2) - to generate other molecules that could be used as chemicals, materials, fuels, or energy storage.Through this research, NREL and its partners are working together to determine the most efficient and cost-effective solutions for energy storage as well as safer ways to create chemicals and plastics that do not rely solely on fossil fuels.

affordable electricity↗