Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Model prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy

DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L–H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ~8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Wind Energy Forecasting with the Weather Research and Forecasting Model

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Siemens Energy, Inc. (Siemens) to develop a wind resource forecasting tool. LLNL was to develop an independent high-resolution mesoscale modeling capability forecasting tool that could be implemented in conjunction with existing wind farm control and monitoring software to provide forecasting of wind resources using local observations of winds and temperature. Research with LLNL’s state-of-the-art large-eddy simulation meteorological prediction model, based on the community WRF model and innovative turbulence parameterizations, would improve that model’s applicability to large wind farms offshore and in complex terrain. The modeling capability would include uncertainty quantification. Finally, the application of the modeling tool and existing global climate change predictions would enable the delineation of the likely effects of climate change on wind resources. Siemens was to provide high time resolution hub-height wind speed and other meteorological data streams, including temperature profiles from wind farms, for LLNL to incorporate into the modeling system, to validate and tune this forecasting model for their locations of interest. These data streams would also be used for longer-term studies of correlations of wind resources to climate oscillations to indicate how long-term climate change trends may affect the available wind resource. Siemens would also provide information and observations of turbine wakes for incorporation into the modeling tool. By implementing state-of-the-art turbulence parameterizations into a simulation model and/or ensembles of simulation models, and by integrating real-time hub height wind speed and other meteorological datastreams from wind farms into that model or ensemble of models, LLNL would develop a forecasting tool that could be implemented by Siemens as an add-on to existing wind farm control and monitoring software to provide owners with useful resource forecasting. The desired outcome was that the accuracy level of the output would be sufficient to substantiate power output commitments. The final deliverable for this work would consist of a document outlining the algorithms and software tools that could be integrated into Siemens Wind Park Supervisor.

17 WIND ENERGY↗
DOE OSTI2022

A gradient-based deep neural network model for simulating multiphase flow in porous media

We report simulation of multiphase flow in porous media is crucial for the effective management of subsurface energy and environment-related activities. The numerical simulators used for modeling such processes rely on spatial and temporal discretization of the governing mass and energy balance partial-differential equations (PDEs) into algebraic systems via finite-difference/volume/element methods. These simulators usually require dedicated software development and maintenance, and suffer low efficiency from a runtime and memory standpoint for problems with multi-scale heterogeneity, coupled-physics processes or fluids with complex phase behavior. Therefore, developing cost-effective, data-driven models can become a practical choice, and in this work, we choose deep learning approaches as they can handle high dimensional data and accurately predict state variables with strong nonlinearity. In this paper, we describe a gradient-based deep neural network (GDNN) constrained by the physics related to multiphase flow in porous media. We tackle the nonlinearity of flow in porous media induced by rock heterogeneity, fluid properties, and fluid-rock interactions by decomposing the nonlinear PDEs into a dictionary of elementary differential operators. We use a combination of operators to handle rock spatial heterogeneity and fluid flow by advection. Since the augmented differential operators are inherently related to the physics of fluid flow, we treat them as first principles prior knowledge to regularize the GDNN training. We use the example of pressure management at geologic CO 2 storage sites, where CO 2 is injected in saline aquifers and brine is produced, and apply GDNN to construct a predictive model that is trained with physics-based simulation data and emulates the physics process. We demonstrate that GDNN can effectively predict the nonlinear patterns of subsurface responses, including the temporal and spatial evolution of the pressure and saturation plumes. We also successfully extend the GDNN to convolutional neural network (CNN), namely gradient-based CNN (GCNN), and validate its capability to improve the prediction accuracy. GDNN has great potential to tackle challenging problems that are governed by highly nonlinear physics and enable the development of data-driven models with higher fidelity.

42 ENGINEERING↗
DOE OSTI2025

Study of same-sign W boson scattering and anomalous couplings in events with one tau lepton from pp collisions at $\sqrt{s}=13$ TeV

A first study is presented of the cross section for the scattering of same-sign W boson pairs via the detection of a τ lepton. The data from proton-proton collisions at the center-of-mass energy of 13 TeV were collected by the CMS detector at the LHC, and correspond to an integrated luminosity of 138 fb −1 . Events were selected that contain two jets with large pseudorapidity and large invariant mass, one τ lepton, one light lepton (e or μ), and significant missing transverse momentum. The measured cross section for electroweak same-sign WW scattering is $1.44^{+0.63}_{-0.56}$ times the standard model prediction. In addition, a search is presented for the indirect effects of processes beyond the standard model via the effective field theory framework, in terms of dimension-6 and dimension-8 operators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Explaining persistent incomplete mixing in multicomponent reactive transport with Eulerian stochastic model

We present an Eulerian stochastic advection–diffusion–reaction (SADR) model and use it to explain incomplete mixing typically observed in transport experiments with bimolecular reactions. Unlike traditional advection– dispersion–reaction (ADR) models, the SADR model describes mechanical and diffusive mixing as two separate processes. In the SADR model, mechanical mixing is driven by random advective velocity whose variance is given by the coefficient of mechanical dispersion. The diffusive mixing is modeled as a Fickian diffusion process with the effective diffusion coefficient. We demonstrate that the sum of the two coefficients is equal to the dispersion coefficient, but only the effective diffusion coefficient contributes to the mixing-controlled reactions. We use experimental results of Gramling et al. * * to show that for transport and bimolecular reactions in porous media, the SADR model is significantly more accurate than the ADR model, which overestimates the concentration of the reaction product by as much as 60%. We also show that the SADR model predicts an experimentally observed bell- shaped spatial distribution of the reactive product concentration, while the ADR model results in a concentration distribution with an unphysical kink.

Bimolecular reactions, incomplete mixing, Stochast↗
DOE OSTI2024

Trajectory Shaper: A Solution for Disrupted Cooperative Adaptive Cruise Control

Cooperative adaptive cruise control (CACC) can effectively reduce energy consumption, alleviate traffic congestion, and enhance safety. However, communication-related constraints and uncooperative vehicle users can disrupt CACC during real-world operations, significantly undermining the putative benefits of CACC. To alleviate the negative impacts of disrupted CACC, this study develops the trajectory shaper (TS) methods as backup solutions for two scenarios: (i) communication between vehicles is infeasible, and vehicles execute adaptive cruise control (ACC) using local sensor measurements; (ii) follower vehicles reject forming a cooperative platoon and execute their local distributed controllers using the information attained via communication. When communication is infeasible, a distributed TS is devised on each vehicle to modify the sensor measurements, enabling safe and efficient ACC operations. When communication is available but uncooperative agents are involved, the lead vehicle of the platoon executes a centralized TS to modify the information shared with uncooperative agents, achieving optimal platoon-level performance. The centralized and distributed TSs are implemented based on the model predictive control algorithms to yield optimal modifications on input information. Robustness is also factored to tackle model uncertainties during TS operations to ensure safety and efficiency. Numerical experiments validate the control performance of the proposed TSs.

Zhou, Anye [ORNL] (ORCID:0000000301455579)↗
DOE OSTI2021

Investigating the relationship between radial pre-stress magnitude and ballistic projectile dwell in heavy confined ceramic targets

A series of bare silicon carbide ceramic armour disks were manufactured with high-strength steel containment to induce varying magnitudes of radial pre-stress. The induced radial stresses, ranging from 0 to 900 MPa, were measured via neutron diffraction and verified by comparison with numerical calculations. Four targets of each configuration, referred to as slip-fit, moderate pre-stress, and high pre-stress, were subject to ballistic testing with hemispherical-nose, tungsten heavy alloy long rod projectiles to determine the interface defeat transition velocity. In-situ diagnostics were unsuccessful in aiding the identification of interface defeat, necessitating a reliance on post-mortem assessment. A transition velocity of approx. 1000 m/s was identified for the unstressed target, increasing to approx. 1200 m/s for the pre-stressed configurations. No performance effect was discernible between the moderate (372 MPa) and high (899 MPa) pre-stress configurations, suggesting that an optimal performance may be achieved for lower pre-stress levels (i.e., <372 MPa). Additionally, the test results were compared with four semi-analytical predictions of interface defeat performance and good agreement was found, albeit with significant range in the model predictions.

42 ENGINEERING↗
DOE OSTI2020

Projecting Life-Cycle Environmental Impacts of Corn Production in the U.S. Midwest under Future Climate Scenarios using machine learning approach

Emission factors and process-based mechanism models are popular approaches used to estimate life-cycle environmental impacts. However, emission factors are often incapable of describing spatial and temporal heterogeneity of agricultural emissions, whereas process-based mechanism models, capable of capturing the heterogeneity, tend to be very complicated, and time-consuming. Efficient predictions of life-cycle environmental impacts from agricultural production are lacking. This study develops a rapid predictive model to quantify life-cycle global warming (GW), eutrophication (EU) and acidification (AD) impacts of corn production using a novel machine learning approach. We used the boosted regression tree (BRT) model to estimate current and future life-cycle environmental impacts of corn production in 12 U.S. Midwest at county scale under four Intergovernmental Panel on Climate Change (IPCC)’s climate scenarios (RCP2.6. 4.5, 6.0, and 8.5) for years 2009-2100. Results show that future life-cycle GW, EU and AD impacts of corn production will increase under all four scenarios, with the worst environmental impacts shown under the RCP 8.5 scenario. Significant spatial variation were estimated to be 3.6, 29.9 and 1.8-folds under the RCP4.5 scenario, and 6.6, 152.9 and 1.6-folds under the RCP8.5 scenario, respectively. Findings from this study demonstrate the importance of considering county-level life-cycle environmental impacts and the influences of climate change in future years to aid in developing potential adaptation and mitigation programs and policies.

Machine learning, climate change, projections, env↗
DOE OSTI2024

Experimental methods to test photoionized plasma models in emission

The expanding foil photoionized plasma platform was developed on the Z-machine at Sandia National Laboratories to produce terrestrial photoionized plasmas at some of the same conditions as those observed in astrophysical black hole accretion disks. The specific scientific goals of the platform are motivated by long-standing astrophysical puzzles related to accreting black hole systems. Ultimately, the experimental goal is to inform the supersolar Fe abundance problem by testing photoionized plasma models in emission with at-parameter laboratory data. High quality high resolution emission data with absolute intensity calibration from a laboratory photoionized plasma have never been collected prior to the experiments described here, providing broader motivation. A robust test of the model predictions requires the successful production of a laboratory photoionized plasma along with measurements of the supporting model inputs including the radiation drive spectrum used to create the photoionized plasma, the electron density, and the temperature. The measured absolute spectral radiance in emission collected from the independently diagnosed plasma can be compared against model calculations performed using the measured inputs. In this paper, we focus on the experimental platform and the model inputs, specifically detailing the methodology used to measure the plasma conditions. The moderate electron temperature of ∼41 eV ± 15 eV and electron density of ∼1e19 ± 1.6e18 e−/cm3 and the ∼3e12 W/cm2 x-ray irradiance at the sample confirm that photoionization dominates the plasma ionization and spectra.

Cho, P. B. (ORCID:0000000291632905)↗
DOE OSTI2021

Offline Arterial Signal Timing Optimization for Closely Spaced Intersections

The stop-and-go driving behavior at a busy arterial causes a significant amount of fuel waste and emissions that could be reduced. For closely spaced intersections, the traditional bottom-up signal timing approach could fail under high volumes when the queues reach the upstream intersections. A well-coordinated arterial should manage the queue length to prevent the control from failing. Traditionally, coordination among signalized intersections for an arterial means finding the good offsets for each intersection. The control of the intersections along an arterial can also be coordinated by optimizing splits. Splits impact the capacity of an intersection. Similar to the highway, the capacity drop could cause growing queues. This work is based on the Virtual Phase-Link (VPL) model, a street traffic model designed for online traffic model predictive control, to obtain a top-down offline arterial signal timing. The VPL-based model can guarantee capacity consistency in intersections along an arterial. We, therefore, adopted the VPL-based model and developed an offline signal timing optimization approach. The proposed timing derived from the VPL-based offline signal timing optimization showed very good results in simulation. We also collected field experiment data, which demonstrated overall energy reductions and speed improvements on some sections of the study arterial.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Multi-Fidelity Learning for Distribution System Voltage Probabilistic Analysis with High Penetration of PVs

This paper proposes a multi-fidelity learning approach for distribution voltage probabilistic analysis with high penetration of PVs. Unlike the existing machine learning-based approaches that require a large number of high fidelity data to achieve satisfactory results, our approach strategically leverage massive low fidelity data from inaccurate model simulations and limited high fidelity historical data. The key idea is to use low-fidelity data to establish an initial model and then the high-fidelity data to calibrate and correct the constructed low-fidelity model. This allows us to fuse low- and high-fidelity data, yielding a high fidelity prediction model. Results obtained from a realistic feeder in US with 80% penetration of PVs show that the proposed approach can achieve a similar accuracy to the one with a large number of high fidelity data. This significantly highlights the advantages of the proposed method as compared to existing data-hungry machine learning methods. Different levels of fidelity data and their impacts are also investigated.

distribution system↗
DOE OSTI2022

OVERVIEW OF PARTICLE DEPOSITION MODELS FOR SPENT NUCLEAR FUEL STORAGE SYSTEMS

Deposition models were built to evaluate contaminant deposition on spent nuclear fuel (SNF) canisters. The primary contaminant of concern is chloride, which is dispersed in the atmosphere and then deposits onto the canisters. During dry storage, the primary degradation process is likely to be Chloride Induced Stress Corrosion Cracking (CISCC) at the heat-affected zones of the canister welds. It is known that stainless steel canisters are susceptible to CISCC; however, the rate of chloride deposition onto the canisters is poorly known, based on sparse field data from a small number of sites. The models presented in this study could be useful for determining the rate of deposition on the canisters and the likelihood of CISCC to help with SNF canister ageing management. The deposition models were developed with the commercial computational fluid dynamics (CFD) code STAR-CCM+. Various deposition mechanisms were considered and incorporated into the models, and a sensitivity study was conducted to determine the most important mechanisms for deposition within a SNF storage system. The models included both a vertical and horizontal configuration storage system: NAC International’s Modular, Advanced Generation, Nuclear All-purpose STORage System (MAGNASTOR®) and a NUHOMS® horizontal storage module respectively. The resulting canister deposition on the horizontal canister is visually compared with inspection data taken onsite at the Calvert Cliffs Nuclear Power Plant. These models are preliminary, and development of the models will continue. Future validation exercises are currently being planned, including the Canister Deposition Field Demonstration (CDFD) effort funded by U.S. Department of Energy office of Nuclear Energy office of Spent Fuel Waste Science and Technology. The goal of the modeling presented is to demonstrate a potential modeling technique that could be used to plan and inform SNF canister ageing management programs with predictive models for the timing and occurrence of canister CISCC.

Suffield, Sarah R.↗
DOE OSTI2021

Data from: "Warming and provenance limit tree recruitment across and beyond the elevation range of subalpine forest"

This data package contains data used to support conclusions drawn in “Warming and provenance limit tree recruitment across and beyond the elevation range of subalpine forest”, by Kueppers et al. 2017. Data were collected in field sites within the Alpine Treeline Warming Experiment (ATWE), located on Niwot Ridge, on the eastern slope of the Colorado Rocky Mountains, USA. Files containing geospatial data are also included, to provide additional locational context.There are four document formats associated with this archive: three comma-separated values (.csv) files, three Microsoft Excel (.xlsx) files, one .pdf data user’s guide, four keyhole markup language (.kml) files, and a compressed folder containing seven ESRI shapefiles (.shp). The .csv files can be opened using any simple text-editor software, R, or Microsoft Excel. The .xlsx files can only be opened using Microsoft Excel. The .kml file can be opened by Google Earth and Google Maps, and the shapefiles can be opened with any GIS application compatible with the file type, such as ESRI’s ArcGIS, and QGIS.We provide two versions of the seedling data file: “PIEN_PIFLseedlings20150522_20150525rev12222020.csv/.xlsx” (hereafter PIEN_PIFLseedlings2015) and “PIEN_PIFLseedlings20160408rev12222020.csv/.xlsx” (hereafter PIEN_PIFLseedlings2016). PIEN_PIFLseedlings2015 contains the data we used in the paper. PIEN_PIFLseedlings2016 contains an updated version of these data that includes sampling from later years. The main differences between the two files lie in the columns titled “k[YEAR],” which describe the number of seedlings that were killed in a particular year. In PIEN_PIFLseedlings2016, there also is an additional year of data for k2015, and k2014 also has additional data input for the 2014 cohort. Additionally, in years 2010-2014, there are minor differences in the number of seedlings killed -- in as few as 0 plots (in 2011) to as many as 5 plots (in 2014) -- due to errors in data input that were rectified in later years.------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Upslope range shifts by subalpine tree species are a widely anticipated effect of climate change. Climate niche models predict subalpine forests to expand upslope, given more suitable growing conditions for adult trees. However, these models do not take into account climates required for successful seedling recruitment and establishment, an essential element for expansion. Further, localized upper treeline populations are hypothesized to contain favorable traits for colonizing the alpine. To test these expectations and to expand our knowledge of seedling recruitment under climate change, we designed a common garden, climate-warming experiment spread across an elevation gradient at Niwot Ridge in the Colorado Rocky Mountains. We focus on two widespread Western North American species, Engelmann spruce (Picea engelmannii Parry ex. Engelm) and limber pine (Pinus flexilis James), which occur at treeline. While the former is considered a late-seral species more tolerant of shade, limber pine is a shade-intolerant pioneer species able to establish on infertile sites.Every autumn, seeds of the two species were collected from high- (3370 m–3570 m) and low-provenance (2910–3240 m) sources close to the experimental sites and sown in our plots. A subset of plots were heated and another subset watered over the summer months to offset the effects of warming. Across five years, we found that seeds originating from low elevation recruited more strongly for both species, although this provenance difference diminished by the fourth year for Engelmann spruce, likely due to small sample sizes. Despite the recruitment of low-provenance seed, warming treatments decreased recruitment at all elevations. Combining this with the likeliness and availability of lower-quality, high provenance seed moving upslope at the treeline, tree migration into the alpine may be slowed. Overall, our findings suggest that the hardier limber pine is likely to become a more significant species in subalpine forest communities in the future, while the more sensitive Engelmann spruce may experience range contraction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

UQTk User Manual (V.3.1.0)

The UQ Toolkit (UQTk) is a collection of libraries and tools for the quantification of uncertainty in numerical model predictions. Version 3.1.0 offers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity analysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

UQTk Version 3.1.1 User Manual

The UQ Toolkit (UQTk) is a collection of libraries and tools for the quantification of uncertainty in numerical model predictions. Version 3.1.1 offers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity analysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Thermal and Deposition Modeling of the Canister Deposition Field Demonstration

This report provides initial thermal and deposition modeling results of the spent nuclear fuel (SNF) storage system planned for use in the Canister Deposition Field Demonstration (CDFD). The goal of the CDFD testing is to collect deposition measurements on the surface of the dry shielded canister (DSC) to aid in chloride-induced stress corrosion crack (CISCC) research. Ideally this testing will occur in a marine coastal environment but at the time of this report no official site has been selected. The CDFD will use the NUHOMS ® Advanced Horizontal Storage Module – High Seismic (AHSM-HS) with a 32PTH2 canister. The SNF assemblies will be replaced with electrical heaters. Canisters are currently being outfitted with these heaters and tested at Sandia National Laboratory (SNL). Thermal modeling was conducted to ensure the electrical heaters were representative of the temperature distribution found within a storage system with SNF. Deposition models were built to evaluate contaminant deposition on SNF canisters. The CDFD testing will help to validate these models, which will then be used to plan and inform on-site test programs and predictive models for the timing and occurrence of canister CISCC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

UQTk Version 3.1.2 User Manual

The UQ Toolkit (UQTk) is a collection of libraries and tools for the quantification of uncertainty in numerical model predictions. Version 3.1.2 offers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity analysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Sensitivity analysis for characterizing the impact of HNGD model on the prediction of hydrogen redistribution in Zircaloy cladding using BISON code

Hydrogen in zirconium cladding is able to precipitate into zirconium hydrides which impacts cladding integrity. The Hydride Nucleation-Growth-Dissolution (HNGD) model in the BISON code accounts for the precipitation and dissolution kinetics of hydride in Zircaloy material. This paper presents global sensitivity analyses of the HNGD model aiming to enhance our understanding of the hydride precipitation phenomena by quantifying the variance that key parameters have on the prediction of hydrogen behavior under various environmental conditions. Here, model predictions are compared to experimental data obtained under two different conditions: 1) with uniformly precharged specimens subjected to a linear thermal gradient, and 2) specimens precharged with a cathodically applied hydride rim at one end of the sample and subjected to an asymmetric thermal gradient. The Sobol sensitivity analysis identifies the key parameters in the HNGD model for both types of specimens. For linear temperature cases, the heat of transport dominates the accuracy of predictions when no precipitation occurs at the cold end, while Terminal Solid Solubility for Dissolution (TSSD) is the most important parameter when precipitation occurs. A large variation in the predicted hydrogen concentration profiles is found in the range of high TSSD due to the occurrence of precipitation. For asymmetric temperature cases, the solubility coefficient gives the largest impact on the predicted hydrogen distribution, as it determines the amount of solute hydrogen dissolved from the initially applied hydride rim. A large discrepancy in hydrogen distribution between simulations and experiments exists with the asymmetric specimens because BISON simulations fail to predict the precipitation of hydride at the cooler end. Comparative studies using former and updated models verifies the significant impact of the hydride growth mechanism on predicted hydrogen concentration profiles. In particular, when hydride initially exists, changes in TSSD generate a large variation in the predicted amount of precipitation by hydride growth, giving large uncertainty in predicting the hydrogen distribution over the sample length. The outputs characterize the significant impact of the hydride growth mechanism in the HNGD model on predicting hydrogen behavior, and improve the understanding of the precipitation of hydride in Zircaloy cladding within a range of expected environmental conditions. The analyses indicate work is still needed to improve the hydride solvus models in the BISON code to accurately predict experimentally observed hydride concentrations and distributions.

36 MATERIALS SCIENCE↗