Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLE PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

A Multi-Mission Space Avionics Architecture

As the budget for the space industry is dwindling, a reusable avionics architecture applicable across multiple missions is urgently needed to reduce the development and production costs of flight projects. This paper presents a multi-mission avionics architecture which employs interface standards extensively, sot hat avionics systems can be built rapidly by assembling subsystems and instruments in a plug-and-play manner. The key feature of this architecture is a "backbone" standard parallel bus which can accommodate various standard interfaces through a repertoire of I/O modules. Hence, specific ;mission requirements can be met by selecting and integrating the appropriate subsystems and instruments into the system. This architecture can also adopt different "backbone" buses, implement redundant processors, and support distributed processing. An example of the architecture using the MOPS6000 from the Southwest Research Institute is also described. Experiments will be done in the Flight System Testbed (FST) of the Jet Propulsion Laboratory to benchmark the MOPS6000 and to demonstrate its multi-mission capability.

Avionics↗

Medium-Range River Flood Forecasts Using a Long Short-Term Memory Network

River flooding and the impacts are a concern for decision makers throughout the United States. Accurate medium-range forecasts (~3-7 days) are critical for providing advanced outlooks to emergency management officials. Unfortunately, accurately forecasting rainfall-runoff and the subsequent rise and fall within rivers remain a challenge in hydrological modeling. While complex physical modeling systems are the standard for representing the hydrological processes, they are computationally demanding and can require extensive calibration. Further, uncertainties remain in the model parameters and input data. The use of machine learning can reduce some of the computational demand while maintaining high accuracy. Therefore, this project makes use of a Long Short-Term Memory (LSTM) network which explicitly accounts for the time-dependent nature of rainfall-runoff modeling. The developed LSTM was trained to predict river gauge height, or stage height, based on time-lagged input features which include: gauge height to initialize the model, the NASA Short-term Prediction Research and Transition Center’s instance of the Land Information System (SPoRT-LIS) relative soil moisture to describe the rainfall infiltration rate, and 6-hr Multi-Radar Multi-Sensor quantitative precipitation estimate (MRMS QPE). The developed LSTM based system is then used to produce 7-day forecasts with a 6-hr temporal resolution using three different quantitative precipitation forecasts (QPF) from the NWS’s Weather Prediction Center (WPC), the NCEP Global Forecast System (GFS) model and the National Blend of Models (NBM). This trained modeling system has been implemented as an experimental product at over 100 different rivers in collaboration with at multiple National Weather Service (NWS) Forecast Offices and River Forecast Centers (RFC) across the eastern half of the United States. The developed LSTM model achieved average Nash-Sutcliffe efficiency (NSE) 0.89 higher than the equivalent medium-range National Water Model ensemble member forecast over a 7-day forecast. In addition to the initial development and evaluation, this project has continued to expand. While the initial model was developed for precipitation dominated basins, expansion of the project has taken it to basins effected by snow melt. This presentation will provide an overview of the project with focus on recent developments on incorporating snow melt processes into the model.

Andrew T. White↗

Approaches to Demonstrating Bankability and Differentiating Product Quality (Presentation)

As the PV Industry has matured, there is increasing interest in quantifying higher quality so that customers may select products that meet their needs, and investors are demanding high confidence before committing millions of dollars. The community is developing the knowledge and standard methods needed to address these. This talk will give an overview of new developments in the last year including descriptions and status of Qualification Plus (a test protocol that goes beyond the standard qualification tests), a PV-specific version of ISO 9001 (for increased confidence in manufacturing consistency), and the Regional Test Centers (where new products can be tested to quantify performance and durability in multiple climate zones.) Development of PV system-level certification will also be described.

14 SOLAR ENERGY↗

Assembling Appliances Standards from a Basket of Functions

Rapid innovation in product design challenges the current methodology for setting standards and labels, especially for electronics, software and networking. Major problems include defining the product, measuring its energy consumption, and choosing the appropriate metric and level for the standard. Most governments have tried to solve these problems by defining ever more specific product subcategories, along with their corresponding test methods and metrics. An alternative approach would treat each energy-using product as something that delivers a basket of functions. Then separate standards would be constructed for the individual functions that can be defined, tested, and evaluated. Case studies of thermostats, displays and network equipment are presented to illustrate the problems with the classical approach for setting standards and indicate the merits and drawbacks of the alternative. The functional approach appears best suited to products whose primary purpose is processing information and that have multiple functions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Ion transport membrane reactor systems and methods for producing synthesis gas

Embodiments of the present invention provide cost-effective systems and methods for producing a synthesis gas product using a steam reformer system and an ion transport membrane (ITM) reactor having multiple stages, without requiring inter-stage reactant injections. Embodiments of the present invention also provide techniques for compensating for membrane performance degradation and other changes in system operating conditions that negatively affect synthesis gas production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

U.S. DOE Special Session: National Energy Technology Laboratory LCA Update - LCAXIX

This work was presented at the American Center for Life Cycle Assessment 2019 Conference (LCAXIX) in Tucson, AZ on September 24, 2019. The evaluation of the environmental advantages and disadvantages of energy technology and policy options requires the comparison of those options on a common basis, and as such, it needs to include not only obvious impacts like converting fuel to useful energy via combustion, but of infrastructure construction, extraction, processing and transportation of fuels, and transport of the final energy product to an end user. Further, it requires comparison across multiple categories of impacts, as single metric perspectives can miss important cross-media tradeoffs. At the Department of Energy’s National Energy Technology Laboratory, life cycle analysis is used as a tool and framework for undertaking a broad range of these types of evaluations. This overview will describe the LCA process at NETL.

Source record↗

U.S. DOE Special Session: National Energy Technology Laboratory LCA Update

This work was presented at the American Center for Life Cycle Assessment 2022 Virtual Conference on November 8, 2022. The evaluation of the environmental advantages and disadvantages of energy technology and policy options requires the comparison of those options on a common basis, and as such, it needs to include not only obvious impacts like converting fuel to useful energy via combustion, but of infrastructure construction, extraction, processing and transportation of fuels, and transport of the final energy product to an end user. Further, it requires comparison across multiple categories of impacts, as single metric perspectives can miss important cross-media tradeoffs. At the Department of Energy’s National Energy Technology Laboratory, life cycle analysis is used as a tool and framework for undertaking a broad range of these types of evaluations. This overview will describe the NETL LCA work over the past year.

Jamieson, Matthew↗

U.S. DOE Special Session: National Energy Technology Laboratory LCA Update

This work was presented at the American Center for Life Cycle Assessment 2023 Conference in Burlington, VT on September 28, 2023. The evaluation of the environmental advantages and disadvantages of energy technology and policy options requires the comparison of those options on a common basis, and as such, it needs to include not only obvious impacts like converting fuel to useful energy via combustion, but of infrastructure construction, extraction, processing and transportation of fuels, and transport of the final energy product to an end user. Further, it requires comparison across multiple categories of impacts, as single metric perspectives can miss important cross-media tradeoffs. At the Department of Energy’s National Energy Technology Laboratory, life cycle analysis is used as a tool and framework for undertaking a broad range of these types of evaluations. This overview will describe the NETL LCA work over the past year.

Jamieson, Matthew↗

Elucidating the Radiation-Induced Redox Chemistry of Plutonium Under Used Nuclear Fuel Reprocessing Conditions

Plutonium plays a critical role in the development of sustainable nuclear fuel cycles, and yet, our fundamental understanding of this element’s inherent radiation-induced redox chemistry and associated impacts on nuclear fuel cycle technologies is limited. Unanticipated changes in oxidation state distribution can influence the speciation and transport of plutonium in a given process. Control of these parameters is especially important for used nuclear fuel reprocessing technologies, wherein the separation and recovery of plutonium is typically achieved by the selective formation, maintenance, and complexation of specific oxidation states. Furthermore, plutonium’s inherent radiation-induced redox chemistry has the capacity to influence the radiolytic behavior of its complexes, the longevity of which are critical in the design of efficient and cost-effective advanced reprocessing technologies. These radiation-induced processes are unavoidable under fuel cycle conditions owing to the inherency of ionizing radiation fields to the decay of plutonium’s isotopes and to the various other radioisotopes generated by nuclear fission and neutron-capture process and the subsequent radioactive decay of their products. As such, mechanistically understanding the response of plutonium’s multiple oxidation states to multi-component ionizing radiation fields is essential for predicting the behavior of this critical element under used nuclear fuel reprocessing conditions. Here, through a combination of time-resolved (electron pulse) and steady-state (alpha and gamma) irradiation experiments complemented by quantitative, multiscale modeling calculations, we present advances in our understanding of radiation-induced plutonium redox chemistry!

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of gamma-induced reactions between 10 and 19 MeV on natural zinc with potential application to 67 Cu production

As part of a broader campaign to understand gamma-induced charged particle emission with multiple materials, the cross sections of the (γ, p), and (γ, α) reactions on a natural zinc target were measured. Here, these cross sections were measured experimentally using a kinematically-complete, event-by-event methodology, using monoenergetic gamma ray beams from the High Intensity Gamma Source (HIγS) facility, ranging from 10 to 19 MeV, to bombard a natural metallic zinc target in vacuum. The measured cross sections are compared with theoretical predictions using the statistical model approach, which is important for the use of such models in real-world applications such as the production of the 67 Cu theranostic via the 68 Zn(γ, p) reaction.

Gamma-induced reactions↗

Real-time, In-line Assessment of Flow Performance for Compressible and Anisotropic Bulk Solids

Feeding and handling problems have been recognized as a major contributor to low production of renewable cellulosic ethanol in the US, which achieved only 7% of nameplate capacity in 2016. Current methods that assess material feeding and handling properties require multiple hours to complete, making them ill-suited for quality assurance and control (QA/QC) in production environments. This talk presents a method, based upon a custom hopper with adaptable geometry, to assess feeding and handling behavior of materials in a production or receiving line in real-time, so that those properties can be used to either sort material or adjust preprocessing conditions to ensure that incoming material meet feeding and handling specifications. Flow properties are determined by continually adjusting the size of the outlet in a plane-flow hopper to maintain a constant fill level in the hopper. The angle of the hopper walls can also be adjusted to tune the geometry to different materials. Tests conducted at approximately 1,000 lbs per hour indicate that this method readily assesses the flow performance differences of corn stover and pine wood due to changes in particle size from 3 to 13 mm and due to changes in moisture content from 10 to 20%. Comparison of this method with shear tests using an automated Schulze ring shear indicate that this method is more sensitive for determining differences in flowability performance than traditional shear tests for corn stover and pine wood. Test results, including wall pressure measurements, are compared to simulations and indicate that this method shows promise for in-line quantitative estimation of the flow properties of compressible and anisotropic materials, including bulk density, cohesion, and internal angle of friction.

09 BIOMASS FUELS↗

The principal component analysis method used with polynomial Chaos expansion to propagate uncertainties through critical transport problems

A critical neutron transport problem with random material properties is introduced. The total cross section and the average neutron multiplicity are assumed to be uncertain, characterized by the mean and variance with a log-normal distribution. The average neutron multiplicity and the total cross section are assumed to be uncorrected and the material properties for differing materials are also assumed to be uncorrected. The principal component analysis method is used to decompose the covariance matrix into eigenvalues and eigenvectors and then 'realizations' of the material properties can be computed. A simple Monte Carlo brute force sampling of the decomposed covariance matrix is employed to obtain a benchmark result for each test problem. In order to save computational time and to characterize the moments and probability density function of the multiplication factor the polynomial chaos expansion method is employed along with the stochastic collocation method. A Gauss-Hermite quadrature set is convolved into a multidimensional tensor product quadrature set and is successfully used to compute the polynomial chaos expansion coefficients of the multiplication factor. Finally, for a particular critical fuel pin assembly the appropriate number of random variables and polynomial expansion order are investigated. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Generating and executing programs for a floating point single instruction multiple data instruction set architecture

Mechanisms for generating and executing programs for a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA) are provided. A computer program product comprising a computer recordable medium having a computer readable program recorded thereon is provided. The computer readable program, when executed on a computing device, causes the computing device to receive one or more instructions and execute the one or more instructions using logic in an execution unit of the computing device. The logic implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA), based on data stored in a vector register file of the computing device. The vector register file is configured to store both scalar and floating point values as vectors having a plurality of vector elements.

97 MATHEMATICS AND COMPUTING↗

Minijet quenching in a concurrent jet + hydro evolution and the nonequilibrium quark-gluon plasma

Minijets, created by perturbative hard QCD collisions at moderate energies, can represent a significant portion of the total multiplicity of a heavy-ion collision event. Since their transverse momenta are initially larger than the typical saturation scale describing the bulk of the equilibrating quark-gluon plasma (QGP), they ought to be described through the physics of parton energy loss. Indeed, their typical stopping distances are larger than the usual hydrodynamization time, so they do not in general hydrodynamize at the same pace than the bulk of the collision. Therefore, in general minijets cannot be described solely by a unique preequilibrium stage that bridges the initial, overoccupied glasma state, with the hydrodynamical evolution. In this work we make use of a new concurrent minijet+hydrodynamic framework in which the properties of the hydrodynamically evolving QGP are modified due to the injection of energy and momentum from the minijets. We study the system for different choices of the minimum transverse momentum associated with minijet production. In order to achieve a realistic description of charged particle multiplicity, the amount of entropy associated to the low- x initial state needs to be reduced. Moreover, the fact that the injected momentum from the randomly oriented minijets is not correlated with the spatial gradients of the system reduces overall flow, and the value of the QGP transport coefficients needs to be reduced accordingly in order to describe the measured flow coefficients in experiments. They are, in effect, an important new source of fluctuations, resulting in a spikier, notably modified hydrodynamical evolution when compared to the scenario in which the presence of minijets is ignored. We avow that their abundance makes it necessary to include their physics in holistic descriptions of heavy-ion collisions. We discuss the impact of the minijets on a number of observables, such as p T spectra and p T -differential flow v n for a wide range of centrality classes. In contrast to elliptic, triangular or quadrangular flow, here we find that directed flow, v 1 , has the strongest potential to discriminate between different minijet production rates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantifying Uncertainty in Land-Use Land-Cover Classification Using Conformal Statistics

Land-use land-cover (LULC) change is one of the most important anthropogenic threats to biodiversity and ecosystems integrity. As a result, the systematic generation of annual regional, national, and global LULC map products derived from the classification of satellite imagery data have become critical inputs for multiple scientific disciplines. The importance of quantifying pixel-level uncertainty to improve the robustness of downstream analyses has long been acknowledged but this practice is still not widely adopted in the generation of these LULC products.

Denis Valle↗

Cost Breakeven Analysis of Lunar In-Situ Propellant Production for Human Missions to the Moon and Mars

NASA is preparing to return humans to the lunar surface as a first step to a human exploration campaign of Mars. Both a sustained lunar campaign and a campaign of missions to Mars will require tens to hundreds of tonnes of propellant. Although this propellant could be delivered from Earth, an alternative approach is to use the potentially vast quantities of lunar ice to enable in-situ propellant production on the lunar surface. This study evaluates the cost breakeven for using lunar-derived propellants, as opposed to those delivered from Earth, in support of an extended human exploration campaign with both a multi-year presence on the Moon as well as multiple crewed missions to Mars. In so doing, the value of lunar propellant production is considered in the context of future exploration priorities, addressing the question: over what range of human missions to the lunar surface and Mars does in-situ propellant production trade favorably with propellant delivery from Earth on the basis of cost? The results of this analysis show that the magnitude and duration of the lunar campaign, more so than the Mars campaign, drive the breakeven and that without long lifetime ISRU systems, with greater than 5 years of autonomous operation before replacement, the demand in cis-lunar space for a Mars campaign favors propellant delivery from Earth.

Christopher A Jones↗

Cost Breakeven Analysis of Lunar In-Situ Propellant Production for Human Missions to the Moon and Mars

NASA is preparing to return humans to the lunar surface as a first step to a human exploration campaign of Mars. Both a sustained lunar campaign and a campaign of missions to Mars will require tens to hundreds of tonnes of propellant. Although this propellant could be delivered from Earth, an alternative approach is to use the potentially vast quantities of lunar ice to enable in-situ propellant production on the lunar surface. This study evaluates the cost breakeven for using lunar-derived propellants, as opposed to those delivered from Earth, in support of an extended human exploration campaign with both a multi-year presence on the Moon as well as multiple crewed missions to Mars. In so doing, the value of lunar propellant production is considered in the context of future exploration priorities, addressing the question: over what range of human missions to the lunar surface and Mars does in-situ propellant production trade favorably with propellant delivery from Earth on the basis of cost? The results of this analysis show that the magnitude and duration of the lunar campaign, more so than the Mars campaign, drive the breakeven and that without long lifetime ISRU systems, with greater than 5 years of autonomous operation before replacement, the demand in cis-lunar space for a Mars campaign favors propellant delivery from Earth.

Christopher A. Jones↗

Radiochemistry as a (rho)R Diagnostic with the RAGS Gas Collection System

Radiochemical diagnostic techniques such as gas-phase capsule debris analysis may prove to be successful methods for establishing the success or failure of ignition experiments at the National Ignition Facility (NIF). Samples in the gas phase offer the most direct method of collection by simply pumping out the large target chamber following a NIF shot. The target capsules will be prepared with dopants which will produce radioactive noble gas isotopes upon activation with neutrons. We have designed and constructed the Radchem Apparatus for Gas Sampling (RAGS) in order to collect post-shot gaseous samples for NIF capsule diagnostics. The design of RAGS incorporates multiple stages intended to purify, transfer, and count the radioactive decays from gaseous products synthesized in NIF experiments. At the moment the dopant of choice is {sup 124}Xe, which will undergo (n,{gamma}) and (n, 2n) reactions to produce {sup 125}Xe and {sup 123}Xe. The half-lives of each are on the order of multiple hours and are suitable for long-term gamma-counting. These isotopes and the rest of the gases evolved in a NIF shot will be drawn through the NIF turbo pumps, past the temporarily shuttered cryo pumps (to aid our collection efficiency), and towards the first main portion of the RAGS system: the pre-cleaner. The pre-cleaner will consist of a water removal system, a series of heated getter cartridges to remove most other impurities such as N{sub 2}, O{sub 2}, CO{sub 2}, etc., and a residual gas analyzer (RGA) to monitor vacuum quality. The noble gases will flow through the precleaner and into the second stage of the system: the cryo collector. This cryo collector consists of a main cryo head for noble gas collection which will operate for approximately five minutes post-shot. Afterwards a valve will close and isolate the pre-cleaner, while the cryo head warms to release the Xe gas to one of two locations - either a second cryo station for in-situ gamma counting, or to a small cooled gas bottle for removal and counting. Additional capabilities of the RAGS system include a noble gas calibration apparatus attached to the NIF target chamber, which will be operated hours pre-shot to determine collection efficiency through the whole RAGS system via the signal detected from the RGA. Also it is possible there will be the addition of a helium puff system to drive the Xe through the pre-cleaner and collection stations. It is also likely that multiple cryo collection stations will be built into the system in the future to fractionate and collect other noble gases such as Kr, Ar, and possibly Ne. A prototype pre-cleaner has been built at Lawrence Berkeley National Laboratory (LBNL) and is in the testing phases. The information learned in this testing will help collaborators at Sandia National Laboratory that are building and delivering the systems that will be deployed at NIF. The LBNL testing so far has demonstrated that radioactive fission gases can be flowed through the system with and without carrier gases of air and/or He, and the activity can be collected on an activated charcoal sample. Further testing in the upcoming months will hopefully yield more information about any presence of Xe in the water removed from the system, and commissioning of a small cryo cooler as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗