Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

MAXIMIZING MAGNETIC ENERGY STORAGE IN THE SOLAR CORONA

The energy that drives solar eruptive events such as coronal mass ejections (CMEs) almost certainly originates in coronal magnetic fields. Such energy may build up gradually on timescales of days or longer before its sudden release in an eruptive event, and the presence of free magnetic energy capable of rapid release requires nonpotential magnetic fields and associated electric currents. For magnetic energy to power a CME, that energy must be sufficient to open the magnetic field to interplanetary space, to lift the ejecta against solar gravity, and to accelerate the material to speeds of typically several hundred km s{sup -1}. Although CMEs are large-scale structures, many originate from relatively compact active regions on the solar surface-suggesting that magnetic energy storage may be enhanced when it takes place in smaller magnetic structures. This paper builds on our earlier work exploring energy storage in large-scale dipolar and related bipolar magnetic fields. Here we consider two additional cases: quadrupolar fields and concentrated magnetic bipoles intended to simulate active regions. Our models yield stored energies whose excess over that of the corresponding open field state can be greater than 100% of the associated potential field energy; this contrasts with maximum excess energies of only about 20% for dipolar and symmetric bipolar configurations. As in our previous work, energy storage is enhanced when we surround a nonpotential field with a strong overlying potential field that acts to 'hold down' the nonpotential flux as its magnetic energy increases.

79 ASTRONOMY AND ASTROPHYSICS↗

Multi-region relaxed magnetohydrodynamics in plasmas with slowly changing boundaries -- Resonant response of a plasma slab

The adiabatic limit of a recently proposed dynamical extension of Taylor relaxation, multi-region relaxed magnetohydrodynamics (MRxMHD), is summarized, with special attention to the appropriate definition of a relative magnetic helicity. The formalism is illustrated using a simple two-region, sheared-magnetic-field model similar to the Hahm-Kulsrud-Taylor (HKT) rippled-boundary slab model. In MRxMHD, a linear Grad-Shafranov equation applies, even at finite ripple amplitude. The adiabatic switching on of boundary ripple excites a shielding current sheet opposing reconnection at a resonant surface. The perturbed magnetic field as a function of ripple amplitude is calculated by invoking the conservation of magnetic helicity in the two regions separated by the current sheet. Here, at low ripple amplitude, "half islands" appear on each side of the current sheet, locking the rotational transform at the resonant value. Beyond a critical amplitude, these islands disappear and the rotational transform develops a discontinuity across the current sheet. Published by AIP Publishing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of oxygen stoichiometry on the magnetization profiles and negative magnetization in LSMO thin films

The depth-dependent magnetization in thin film oxygen stoichiometric and oxygen-deficient La 0.7 Sr 0.3 MnO 3 is investigated by using polarized neutron reflectivity and DC bulk magnetometry. The polarized neutron reflectivity results reveal that the stoichiometric sample shows enhanced interfacial magnetization relative to the rest of the film. The oxygen-deficient sample exhibits a reduced average magnetization from the optimized recipe. Both films show regions of suppressed magnetization at the surface regardless of the growth pressure. The oxygen stoichiometric film does not show an interfacial dead layer, whereas the oxygen-deficient film exhibits a dead layer whose thickness changes with temperature. At a low applied field, we observe striking differences in the depth dependence of the magnetic ordering, with the oxygen-deficient film exhibiting exchange spring behavior, while the stoichiometric film shows a constant magnetization direction across the film. Furthermore, these results suggest that the incorporation of oxygen vacancies during growth leads to an accumulation of vacancies at the interface, which is enhanced at higher temperature due to increased oxygen mobility, creating a region of reduced magnetism that couples to the rest of the film. These results offer insight into the complex behavior and role of oxygen vacancies in the magnetism of these systems. Additionally, the study reveals further details of the negative magnetization in La 0.7 Sr 0.3 MnO 3 reported in previous studies, which are discussed here.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preferred Orientation Enhancement in FeCo/SiO{sub 2} Nanocomposite Films Induced by Cu Underlayer

We prepared FeCo/SiO{sub 2} thin films through depositng initial materials on various thickness Cu seed layers by sol-gel spin-coating and magnetron-sputtering methods. As-prepared composite films were reduced in hydrogen to induce texture growth. Structure, magnetic property, and surface topography of the films were characterized by X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and atomic force microscopy (AFM). These experimental data indicate that the ratio values of I{sub (200)}/I{sub (110)} of the thin films are all larger than 1 for all the samples, indicating that FCC-copper is in favor of promoting (200) FeCo texture, but more thickness will reduce this advantage. Cu underlayers can also promote the out-of-plane magnetic anisotropy of the films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence of a reduction reaction of oxidized iron/cobalt by boron atoms diffused toward naturally oxidized surface of CoFeB layer during annealing

We have investigated the redox reaction on the surface of Ta/CoFeB/MgO/CoFeB magnetic tunnel junction stack samples after annealing at 300, 350, and 400 °C for 1 h using angle-resolved X-ray photoelectron spectroscopy for precise analysis of the chemical bonding states. At a capping tantalum layer thickness of 1 nm, both the capping tantalum layer and the surface of the underneath CoFeB layer in the as-deposited stack sample were naturally oxidized. By comparison of the Co 2p and Fe 2p spectra among the as-deposited and annealed samples, reduction of the naturally oxidized cobalt and iron atoms occurred on the surface of the CoFeB layer. The reduction reaction was more significant at higher annealing temperature. Oxidized cobalt and iron were reduced by boron atoms that diffused toward the surface of the top CoFeB layer. A single CoFeB layer was prepared on SiO{sub 2}, and a confirmatory evidence of the redox reaction with boron diffusion was obtained by angle-resolved X-ray photoelectron spectroscopy analysis of the naturally oxidized surface of the CoFeB single layer after annealing. The redox reaction is theoretically reasonable based on the Ellingham diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetically enhanced phase separation for solvent extraction

Briefly, the invention provides a method for magnetically assisting demulsification of extraction phases, the method having the steps of contacting a first solution of a first solvent and a solvated paramagnetic metal ion with a second solvent, where the second solvent is immiscible with the first solvent; mixing the first and second solutions to create an emulsion having a first phase of the first solvent and second phase comprising the second solvent where the phases of the emulsion contain different concentrations of the paramagnetic metal ion; and applying a magnetic field gradient to the first and second phases of the emulsion to accelerate separation of the first phase from the second phase. Also provided is a system for demulsifying phases used in the extraction of paramagnetic moieties from solution having a lumen with an interior region, an interior surface, and exterior surface; and a magnetic field gradient present within the interior region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RF breakdown of 805 MHz cavities in strong magnetic fields

Ionization cooling of intense muon beams requires the operation of high-gradient, normal-conducting RF structures in the presence of strong magnetic fields. We have measured the breakdown rate in several RF cavities operating at several frequencies. Cavities operating within solenoidal magnetic fields B > 0.25 T show an increased RF breakdown rate at lower gradients compared with similar operation when B = 0 T. Ultimately, this breakdown behavior limits the maximum safe operating gradient of the cavity. Beyond ionization cooling, this issue affects the design of photoinjectors and klystrons, among other applications. We have built an 805 MHz pillbox-type RF cavity to serve as an experimental testbed for this phenomenon. This cavity is designed to study the problem of RF breakdown in strong magnetic fields using various cavity materials and surface treatments, and with precise control over sources of systematic error. We present results from tests in which the cavity was run with all copper surfaces in a variety of magnetic fields.

43 PARTICLE ACCELERATORS↗

Magnetic nanoparticles for medical applications: Progress and challenges

Magnetic nanoparticles present unique properties that make them suitable for applications in biomedical field such as magnetic resonance imaging (MRI), hyperthermia and drug delivery systems. Magnetic hyperthermia involves heating the cancer cells by using magnetic particles exposed to an alternating magnetic field. The cell temperature increases due to the thermal propagation of the heat induced by the nanoparticles into the affected region. In order to increase the effectiveness of the treatment hyperthermia can be combined with drug delivery techniques. As a spectroscopic technique MRI is used in medicine for the imaging of tissues especially the soft ones and diagnosing malignant or benign tumors. For this purpose Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} ferrite nanoparticles with x between 0 and 1 have been prepared by co-precipitation method. The cristallite size was determined by X-ray diffraction, while the transmission electron microscopy illustrates the spherical shape of the nanoparticles. Magnetic characterizations of the nanoparticles were carried out at room temperature by using a vibrating sample magnetometer. The specific absorption rate (SAR) was measured by calorimetric method at different frequencies and it has been observed that this value depends on the chemical formula, the applied magnetic fields and the frequency. The study consists of evaluating the images, obtained from an MRI facility, when the nanoparticles are dispersed in agar phantoms compared with the enhanced ones when Omniscan was used as contrast agent. Layer-by-layer technique was used to achieve the necessary requirement of biocompatibility. The surface of the magnetic nanoparticles was modified by coating it with oppositely charged polyelectrolites, making it possible for the binding of a specific drug.

60 APPLIED LIFE SCIENCES↗

The Effect of Dose Rate on Composite Durability When Exposed to a Simulated Long-Term Lunar Radiation Environment

Human exploration of space beyond low Earth orbit (LEO) requires a safe living and working environment for crew. Composite materials are one type of material being investigated by NASA as a multi-functional structural approach to habitats for long-term use in space or on planetary surfaces with limited magnetic fields and atmosphere. These materials provide high strength with the potential for decreased weight and increased radiation protection of crew and electronics when compared with conventional aluminum structures. However, these materials have not been evaluated in a harsh radiation environment, as would be experienced outside of LEO or on a planetary surface. Thus, NASA has been investigating the durability of select composite materials in a long-term radiation environment. Previously, NASA exposed composite samples to a simulated, accelerated 30-year radiation treatment and tensile stresses similar to those of a habitat pressure vessel. The results showed evidence of potential surface oxidation and enhanced cross-linking of the matrix. As a follow-on study, we performed the same accelerated exposure alongside an exposure with a decreased dose rate. The slower dose ]rate is comparable to a realistic scenario, although still accelerated. Strain measurements were collected during exposure and showed that with a fastdose rate, the strain decreased with time, but with a slow ]dose rate, the strain increased with time. After the radiation exposures, samples were characterized via tensile tests, flexure tests, Fourier Transform Infrared Spectroscopy (FTIR), and Differential Scanning Calorimetry (DSC). The results of these tests will be discussed.

Rojdev, Kristina↗

Flux Compression Magnetic Nozzle

In pulsed fusion propulsion schemes in which the fusion energy creates a radially expanding plasma, a magnetic nozzle is required to redirect the radially diverging flow of the expanding fusion plasma into a rearward axial flow, thereby producing a forward axial impulse to the vehicle. In a highly electrically conducting plasma, the presence of a magnetic field B in the plasma creates a pressure B(exp 2)/2(mu) in the plasma, the magnetic pressure. A gradient in the magnetic pressure can be used to decelerate the plasma traveling in the direction of increasing magnetic field, or to accelerate a plasma from rest in the direction of decreasing magnetic pressure. In principle, ignoring dissipative processes, it is possible to design magnetic configurations to produce an 'elastic' deflection of a plasma beam. In particular, it is conceivable that, by an appropriate arrangement of a set of coils, a good approximation to a parabolic 'magnetic mirror' may be formed, such that a beam of charged particles emanating from the focal point of the parabolic mirror would be reflected by the mirror to travel axially away from the mirror. The degree to which this may be accomplished depends on the degree of control one has over the flux surface of the magnetic field, which changes as a result of its interaction with a moving plasma.

Thio, Y. C. Francis↗

Performance and Thermal Characterization of the NASA-300MS 20 kW Hall Effect Thruster

NASA's Space Technology Mission Directorate is sponsoring the development of a high fidelity 15 kW-class long-life high performance Hall thruster for candidate NASA technology demonstration missions. An essential element of the development process is demonstration that incorporation of magnetic shielding on a 20 kW-class Hall thruster will yield significant improvements in the throughput capability of the thruster without any significant reduction in thruster performance. As such, NASA Glenn Research Center and the Jet Propulsion Laboratory collaborated on modifying the NASA-300M 20 kW Hall thruster to improve its propellant throughput capability. JPL and NASA Glenn researchers performed plasma numerical simulations with JPL's Hall2De and a commercially available magnetic modeling code that indicated significant enhancement in the throughput capability of the NASA-300M can be attained by modifying the thruster's magnetic circuit. This led to modifying the NASA-300M magnetic topology to a magnetically shielded topology. This paper presents performance evaluation results of the two NASA-300M magnetically shielded thruster configurations, designated 300MS and 300MS-2. The 300MS and 300MS-2 were operated at power levels between 2.5 and 20 kW at discharge voltages between 200 and 700 V. Discharge channel deposition from back-sputtered facility wall flux, and plasma potential and electron temperature measurements made on the inner and outer discharge channel surfaces confirmed that magnetic shielding was achieved. Peak total thrust efficiency of 64% and total specific impulse of 3,050 sec were demonstrated with the 300MS-2 at 20 kW. Thermal characterization results indicate that the boron nitride discharge chamber walls temperatures are approximately 100 C lower for the 300MS when compared to the NASA- 300M at the same thruster operating discharge power.

High power↗

FREELY DECAYING TURBULENCE IN FORCE-FREE ELECTRODYNAMICS

Freely decaying, relativistic force-free turbulence is studied for the first time. We initiate the magnetic field at a short wavelength and simulate its relaxation toward equilibrium on two- and three-dimensional periodic domains in both helical and nonhelical settings. Force-free turbulent relaxation is found to exhibit an inverse cascade in all settings and in three dimensions to have a magnetic energy spectrum consistent with the Kolmogorov 5/3 power law. Three-dimensional relaxations also obey the Taylor hypothesis; they settle promptly into the lowest-energy configuration allowed by conservation of the total magnetic helicity. However, in two dimensions, the relaxed state is a force-free equilibrium whose energy greatly exceeds the Taylor minimum and that contains persistent force-free current layers and isolated flux tubes. We explain this behavior in terms of additional topological invariants that exist only in two dimensions, namely the helicity enclosed within each level surface of the magnetic potential function. The speed and completeness of turbulent magnetic free-energy discharge could help account for rapidly variable gamma-ray emission from the Crab Nebula, gamma-ray bursts, blazars, and radio galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlinear response of a neoclassical four-field magnetic reconnection model to localized current drive

In tokamaks magnetic islands arise from an unstable process of tearing and reconnecting of helical field lines across rational surfaces. After a linear stage the magnetic instability develops through three characteristic nonlinear stages where increasingly complex topological alterations occur in the form of the magnetic islands. The problem of response of reconnection process to the injection of an external current suitably localized is addressed using a four-field model in a plane slab plasma, with a novel extension to account consistently of the relevant neoclassical effects, such as bootstrap current and pressure anisotropy. The results found have implications on the interpretation of the possible mechanism of present day experimental results on neoclassical tearing modes as well as on the concepts for their control or avoidance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural, electronic and magnetic properties of Mn 3 N 2 (0 0 1) surfaces

Spin-polarized first-principles total energy calculations have been performed to study the structural, electronic and magnetic properties of Mn 3 N 2 (0 0 1) surfaces. It is found that three surface terminations are energetically stable, in agreement with previous scanning tunneling microscopy experiments that have found three different electronic contrasts in their images. It is also found that in all three cases, the topmost layer has a MnN stoichiometry. Density of states calculations show a metallic behavior for all the stable structures with the most important contribution close to the Fermi level coming from the Mn-d orbitals. Finally, our Tersoff–Hamann scanning tunneling microscopy simulations are in good agreement with previous experimental results.

36 MATERIALS SCIENCE↗

Energy levels of a quantum particle on a cylindrical surface with non-circular cross-section in electric and magnetic fields

We calculate the energy levels of a quantum particle on a cylindrical surface with non-circular cross-section in uniform electric and magnetic fields. Using separation of variables method and a change of independent variable, we show that the problem can be reduced to a one-dimensional Schrödinger equation for a periodic potential. The effects of varying the shape of the cross-section while keeping the same perimeter and the strengths of the electric and magnetic fields are investigated for elliptical, corrugated, and nearly-rectangular tubes with radial dimensions of the order of a nanometer. The geometric potential has minima at the angular positions where there is a significant amount of curvature. For the elliptical and corrugated tubes, it is shown that as the tube departs from the circular shape of cross-section the double-degeneracy between the energy levels is lifted. For the nearly-rectangular tube, it is shown that energy level crossings occur as the horizontal dimension of the tube is varied while keeping the same perimeter and radius of circular corners. The interplay between the curvature and the strength of the electric and magnetic fields determines the overall behavior of the energy levels. As the strength of the electric field increases, the overall potential gets skewed creating a potential well on the side corresponding to the more negative electric potential. The energy levels of the first few excited states approach more positive values while the ground state energy level approaches a more negative value. For large electric fields, all bound state energy levels tend to more negative values. The contribution of weak magnetic fields to the overall potential behaves in the same way as the electric field contribution but with its sign depending on the direction of the component of the momentum parallel to the cylindrical axis. Large magnetic fields lead to pairing of energy levels reminiscent of 2D Landau levels for the elliptical and nearly-rectangular tubes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanism for the X-ray pulsations in Cyg X-1.

The mechanism proposed involves the occurrence of a flare in a region of high magnetic field on the surface of a star. The flare produces oscillations in the magnetic field structure. The oscillations lead to heating of the plasma in a flux tube which emits thermal radiation. The heating may be caused by magnetic pumping or particles accelerated in periodic bursts by the flare. Synchrotron radiation from high energy particles accounts for the hard X-ray emission.

Blumenthal, G. R.↗

The extended mission of Viking

The extended mission of the Viking project emphasizing the study of weather on Mars is presented. Samples were acquired for the analysis of surface material, and investigations were made of the physical and magnetic properties of the surface, with orbiters and landers producing large quantities of photographs of the surface and of atmospheric phenomena. The operation and chronology of Viking Orbiter 1 and 2 and Viking Lander 1, including the Viking continuation, the survey, and the orbiter completion missions are discussed.

Snyder, C. W.↗

Remote sensing of two-dimensional magnetopause structures

The study presents a technique for analyzing remote measurements made by a single spacecraft of 2D disturbances in the ambient magnetosheath or magnetospheric magnetic field caused, for example, by flux transfer events or pressure pulses. The methodology is based on a recent linear theory for isentropic field-aligned MHD flow over gently sloping 2D obstacles. The technique uses only magnetic field measurements and can provide information about the orientation and actual cross-sectional shape of the event, as well as information about the spacecraft trajectory relative to the bulge. Analysis of two sample events, one recorded by the AMPTE/IRM spacecraft in the magnetosheath and the other by AMPTE/CCE in the magnetosphere, indicates that the bulges on the magnetopause surface causing the magnetic field and flow perturbations for these events did not have the semicircular cross section suggested in previous work; instead they had a more elongated shape, the dimension tangential to the magnetopause being substantially larger than that normal to it.

Walthour, D. W.↗