Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Modifying magnetic properties of MnBi with carbon: an experimental and theoretical study

MnBi and MnBi-based materials have been investigated as prospective rare-earth-free permanent magnets with moderate energy product. One of the main issues with MnBi synthesis is the presence of residual Bi in the sample which reduces the net magnetization. Here, we have found that MnBi synthesized in the presence of carbon substantially reduces the amount of residual Bi, improving its saturation magnetization. We have synthesized Mn 55 Bi 45 and Mn 55 Bi 45 C x samples using arc melting and high-vacuum annealing. The room temperature x-ray diffraction patterns indicate that both Mn 55 Bi 45 and Mn 55 Bi 45 C x crystallize in the hexagonal NiAs-type structure. The Rietveld analysis of the x-ray patterns shows that the amount of residual Bi reduces from 16 wt.% for Mn 55 Bi 45 to 5 wt.% for Mn 55 Bi 45 C x . The high-field (3 T) magnetizations measured at room temperature are 61 emu g –1 and 66 emu g –1 for Mn 55 Bi 45 and Mn 55 Bi 45 C x , respectively. To understand the role of C in enhancing the magnetization of MnBi, we carried out the first-principles calculations of both stoichiometric and nonstoichiometric MnBi alloys, which suggests that the increase of magnetization in Mn 55 Bi 45 C x may be due to the coating of MnBi grains with C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic properties of the CrMnFeCoNi high-entropy alloy

In this paper, we present experimental data showing that the equiatomic CrMnFeCoNi high-entropy alloy undergoes two magnetic transformations at temperatures below 100 K while maintaining its fcc structure down to 3 K. The first transition, paramagnetic to spin glass, was detected at 93 K and the second transition of the ferromagnetic type occurred at 38 K. Field-assisted cooling below 38 K resulted in a systematic vertical shift of the hysteresis curves. Strength and direction of the associated magnetization bias was proportional to the strength and direction of the cooling field and shows a linear dependence with a slope of 0.006 ± 0.001 emu T. The local magnetic moments of individual atoms in the CrMnFeCoNi quinary fcc random solid solution were investigated by ab initio (electronic density functional theory) calculations. Results of the numerical analysis suggest that, irrespective of the initial configuration of local magnetic moments, the magnetic moments associated with Cr atoms align antiferromagnetically with respect to a cumulative magnetic moment of their first coordination shell. The ab initio calculations further showed that the magnetic moments of Fe and Mn atoms remain strong (between 1.5 and 2 μ B ), while the local moments of Ni atoms effectively vanish. Finally, these results indicate that interactions of Mn- and/or Fe-located moments with the surrounding magnetic structure account for the observed macroscopic magnetization bias.

36 MATERIALS SCIENCE↗

Process yield Co-Fe alloys with superior high temperature magnetic properties

Cobalt-iron alloys containing from 7.0 to 9.3 percent iron prepared from ultrapure cobalt and iron have the highest Curie point of all known magnetically soft materials. Their high permeability, low hysteresis loss, good saturation induction, and square loop characteristics recommend them for use in power transformers and rotating machinery.

Barranger, J. P.↗

Magnetic properties and granulometry of metallic iron in lunar breccia 14313

Based on a detailed study of time-dependent or viscous remanence (VRM), thermoremanence (TRM) and magnetic granulometry of soil breccia 14313, single-domain particles of iron 100 to 200 A in size are proposed as the major carriers of natural remanence (NRM) in this rock. The VRM of 14313 is unusually intense and exhibits a logarithmic time decrease of VRM which ceases fairly abruptly after a time about equal to the original exposure to the field. The partial TRM spectrum reveals both a high-blocking-temperature fraction, scarcely affected by AF demagnetization to 1000 Oe, and an unusual concentration of blocking temperatures just above room temperature. The former fraction would contribute a very hard and stable component to any NRM of lunar origin, but the latter fraction, which accounts for the pronounced VRM of 14313 and undoubtedly has imparted a large viscous NRM component in the earth's field, is also surprisingly hard. A substantial portion (20 to 40%) is not demagnetized by an 800-Oe field.

Dunlop, D. J.↗

Magnetic properties of iron-bearing graphite fibers

Carbon fibers containing ferromagnetically-ordered iron or other transition metals could be used in a variety of lightweight magnetic composites. Intercalation of bulk graphite with CoCl2 or FeCl3, followed by reduction with butyl lithium, did indeed produce magnetic samples; however, the observed room temperature permeabilities (mu) were less than 2 G/Oe. Magnetic data are presented on carbon fibers containing large amounts of elemental iron, which were prepared by a new method. In this method Amoco P-75 fibers were intercalated with Br2 and I2 followed by fluorination, forming CF(0.75). This product was then intercalated with FeCl3. Subsequent heat treatments in oxidizing and reducing atmospheres converted most of the iron to the pure alpha phase. Room temperature permeabilities as large as 40 G/Oe are observed.

Ferrante, R.↗

Structure and magnetic properties of L n MnSbO ( L n = La and Ce)

Here, a neutron powder diffraction (NPD) study of LnMnSbO (Ln = La or Ce) reveals differences between the magnetic ground state of the two compounds due to the strong Ce-Mn coupling compared to La-Mn. The two compounds adopt the P4/nmm space group down to 2 K, and whereas magnetization measurements do not show obvious anomaly at high temperatures, NPD reveals a C-type antiferromagnetic (AFM) order below T N = 255K for LaMnSbO and 240 K for CeMnSbO. While the magnetic structure of LaMnSbO is preserved to base temperature, a sharp transition at T SR = 4.5K is observed in CeMnSbO due to a spin-reorientation (SR) transition of the Mn 2+ magnetic moments from pointing along the c axis to the ab plane. The SR transition in CeMnSbO is accompanied by a simultaneous long-range AFM ordering of the Ce moments, which indicates that the Mn SR transition is driven by the Ce-Mn coupling. The ordered moments are found to be somewhat smaller than those expected for Mn 2+ (S = 5/2) in insulators, but large enough to suggest that these compounds belong to the class of local-moment antiferromagnets. The lower T N found in these two compounds compared to the As-based counterparts (T N = 317 for LaMnAsO, T N = 347K for CeMnAsO) indicates that the Mn-Pn (Pn=As or Sb) hybridization that mediates the superexchange Mn-Pn-Mn coupling is weaker for the Sb-based compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative Study of Magnetic Properties of Nanoparticles by High-Frequency Heat Dissipation and Conventional Magnetometry

The rate of heating of a water-based colloid of uniformly sized 15 nm magnetic nanoparticles by high-amplitude and high-frequency ac magnetic field induced by the resonating LC circuit (nanoTherics Magnetherm) was measured. The results are analyzed in terms of specific energy absorption rate (SAR). Fitting field amplitude and frequency dependences of SAR to the linear response theory, magnetic moment per particles was extracted. The value of magnetic moment was independently evaluated from dc magnetization measurements (Quantum Design MPMS) of a frozen colloid by fitting field-dependent magnetization to Langevin function. The two methods produced similar results, which are compared to the theoretical expectation for this particle size. Additionally, analysis of SAR curves yielded effective relaxation time.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Single crystal growth and magnetic properties of the mixed valent Yb containing Zintl phase, Yb 14 MgSb 11

Here, large crystals of Yb 14 MgSb 11 were grown through a Sn flux method. Magnetic susceptibility measurements yield an effective magnetic moment of 3.4(1) μ B , revealing the presence of both divalent and trivalent Yb in Yb 14 MgSb 11 . Previously assumed to only contain Yb 2+ as in Yb 14 MnSb 11 , the mixed valency demonstrates that Yb 14 MgSb 11 is a Zintl phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and magnetic properties of Ba 9 ⁢V 3 ⁢Te 15 with ferromagnetic spin chains

Here we report a ferromagnetic compound Ba9⁢V3⁢Te15 with quasi-one-dimensional (1D) spin chains. It was synthesized at high-temperature and high-pressure conditions and systematically investigated via structural, transport, magnetic and heat capacity measurements. Ba9⁢V3⁢Te15 mainly consists of trimerized face-sharing V⁢Te6 octahedral chains running along the 𝑐 axis, which are separated by a distance of 10.184⁢(8)⁢Å, thus demonstrating a strong 1D structural character. Ba9⁢V3⁢Te15 is a semiconductor with a band gap ∼128meV and undergoes a ferromagnetic transition with 𝑇C∼3.6K. Far above 𝑇C, the short-range spin orders due to the intrachain spin coupling have developed, which leads to a negative magnetoresistance effect, the deviation of magnetic susceptibility from the Curie-Weiss law and 𝑇1/2 dependence of magnetic heat capacity. Our results reveal that Ba9⁢V3⁢Te15 provides a good opportunity to study the intrinsic properties of a system with quasi-1D ferromagnetic spin chains.

1-dimensional spin chains↗

Magnetic properties of Ni 40+x Mn 39-x Sn 21 (x = 0, 2, 4, 6 and 8 at.%) Heusler alloys

The low electron concentration region (e/a < 7.75) of the magnetic phase diagram of the off-stoichiometric Ni–Mn–Sn Heusler alloys was investigated in detail by DSC and magnetization measurements of the Ni 40+x Mn 39-x Sn 21 (x = 0, 2, 4, 6 and 8 at.%) alloys. The alloys show a stable austenitic phase without any martensitic transformation down to 5 K even after heat treatment. The Curie temperature exhibits a broad maximum over a large composition range. The evolution of the magnetic moment with the electron concentration fits the data of previous studies and confirms the peak-like dependence in the extended range of e/a values predicted by ab initio calculations. Finally, the explored part of the moment versus e/a curve can be explained in terms of a localized magnetic moment model and full atomic order in the alloys.

36 MATERIALS SCIENCE↗

Control of nanoparticle size, reactivity and magnetic properties during the bioproduction of magnetite by Geobacter sulfurreducens

The bioproduction of nano-scale magnetite by Fe(III)-reducing bacteria offers a potentially tunable, environmentally benign route to magnetic nanoparticle synthesis. Here, we demonstrate that it is possible to control the size of magnetite nanoparticles produced by Geobacter sulfurreducens, by adjusting the total biomass introduced at the start of the process. The particles have a narrow size distribution and can be controlled within the range of 10-50 nm. X-ray diffraction analysis indicates that controlled production of a number of different biominerals is possible via this method including goethite, magnetite and siderite, but their formation is strongly dependent upon the rate of Fe(III) reduction and total concentration and rate of Fe(II) produced by the bacteria during the reduction process. Relative cation distributions within the structure of the nanoparticles has been investigated by X-ray magnetic circular dichroism and indicates the presence of a highly reduced surface layer which is not observed when magnetite is produced through abiotic methods. The enhanced Fe(II)-rich surface, combined with small particle size, has important environmental applications such as in the reductive bioremediation of organics, radionuclides and metals. In the case of Cr(VI), as a model high-valence toxic metal, optimised biogenic magnetite is able to reduce and sequester the toxic hexavalent chromium very efficiently in the less harmful trivalent form.

60 APPLIED LIFE SCIENCES↗

Magnetic properties of γ-Fe 2 O 3 nanoparticles in a porous SiO 2 shell for drug delivery

A method is presented for synthesizing core–shell nanoparticles with a magnetic core and a porous shell suitable for drug delivery and other medical applications. The core contains multiple γ -Fe 2 O 3 nanoparticles (~15 nm) enclosed in a SiO 2 (~100–200 nm) matrix using either methyl (denoted TMOS- γ -Fe 2 O 3 ) or ethyl (TEOS- γ -Fe 2 O 3 ) template groups. Low-temperature Mössbauer spectroscopy showed that the magnetic nanoparticles have the maghemite structure, γ -Fe 2 O 3 , with all the vacancies in the octahedral sites. Saturation magnetization measurements revealed that the density of γ -Fe 2 O 3 was greater in the TMOS- γ -Fe 2 O 3 nanoparticles than TEOS- γ -Fe 2 O 3 nanoparticles, presumably because of the smaller methyl group. Magnetization measurements showed that the blocking temperature is around room temperature for the TMOS- γ -Fe 2 O 3 and around 250 K for the TEOS- γ -Fe 2 O 3 . Three dimensional topography analysis shows clearly that the magnetic nanoparticles are not only at the surface but have penetrated deep in the silica to form the core–shell structure.

Physics↗

Effect of plastic deformation on the magnetic properties and dislocation luminescence of isotopically enriched silicon {sup 29}Si:B

A correlation between the temperature dependences of the D1-line intensity of dislocation luminescence and the magnetic moment of plastically deformed isotopically enriched crystals {sup 29}Si:B is found. It is established that the magnetic susceptibility of the deformed crystals obtained by integration of the spectra of electron spin resonance and the D1-line intensity undergo similar nonmonotonic variations with temperature varying in the range of 20–32 K.

36 MATERIALS SCIENCE↗

Magnetic properties of high-T(sub c) superconductors: Rigid levitation, flux pinning, thermal depinning, and fluctuation

The levitation of high-T(sub c) superconductors is quite conspicuous: Above magnets of low symmetry a disk of these ceramics floats motionless, without vibration or rotation; it has a continuous range of stable positions and orientations as if it were stuck in sand. Some specimens may even be suspended above or below the same magnet. This fascinating stability, inherent to no other type of levitation, is caused by the pinning of magnetic flux lines by inhomogeneities inside these extreme type-2 superconductors. The talk deals with pinning of magnetic flux in these materials, with flux flow, flux creep, thermally activated depinning, and the thermal fluctuation of the vortex positions in the flux line lattice (often called flux lattice melting). Also discussed are the fluctuations of the (nearly periodic) magnetic field inside these superconductors which are caused by random pinning sites and by the finite temperature. These fluctuations broaden the van-Hove singularities observed in the density of the magnetic field by nuclear magnetic resonance and by muon spin rotation.

Brandt, E. H.↗

Investigations on the temperature dependent electrical and magnetic properties of NiTiO{sub 3} by molten salt synthesis

Highlights: ► NiTiO{sub 3} particles were synthesized by simple molten salt technique. ► The single phase compound formation was confirmed through XRD analysis. ► The detailed impedance properties of NiTiO{sub 3} were studied at elevated temperature. ► The conductance spectra were fitted using Jonscher Power Law. ► Low temperature magnetization behaviour was explained by core shell model. - Abstract: Submicron-sized NiTiO{sub 3} particles were successfully synthesized by simple molten salt method. The phase purity and crystal structure was confirmed through X-ray diffraction. The characteristics bands of Ni-O and Ti-O were identified using Fourier Transform Infra-red spectrum. The SEM and TEM images shows that the particles are lying in the range of 150–300 nm and selected area electron diffraction pattern (SAED) infers the single crystalline nature of NiTiO{sub 3}. The impedance spectra elucidate the grain interior conducting mechanism and semi-conducting nature of NiTiO{sub 3} at elevated temperatures. The frequency dependent conductance spectra were found to obey Jonscher's power law and a maximum value of conductivity observed was 2 × 10{sup −5} S cm{sup −1} at 520 °C. The magnetic susceptibility measurement infers the antiferromagnetic behavior with the Neel temperature (T{sub N}) of 14.9 K. The increase in coercivity below T{sub N} reveals the coexistence of antiferromagnetic with superparamagnetic behavior. B–H curve represents the first order phase transition from antiferromagnetic to ferromagnetic transition.

36 MATERIALS SCIENCE↗

Magnetic properties of ferrimagnetic Mn 3 Si 2 Se 6

The physical properties of Mn 3 Si 2 Se 6 have been investigated using single crystals grown by iodine-assisted vapor transport. Additionally, the material possesses a ferrimagnetic ground state and the properties are similar to those in the isostructural compound Mn 3 Si 2 Se 6 . Furthermore, in these trigonal materials, the dominant magnetic exchanges are antiferromagnetic and intrinsically frustrated, leading to a variety of competing ground states. In Mn 3 Si 2 Se 6 , the Curie temperature is TC = 67(1)K, which is slightly lower than that of Mn 3 Si 2 Se 6 where TC = 78K. The anisotropy field is also smaller in the selenide relative to the telluride. In both materials, short-range correlations likely exist well-above TC. Neutron single crystal diffraction data on Mn 3 Si 2 Se 6 suggest a collinear ferrimagnetic structure with the moments tilting out of the ab-plane in zero-field. Finally, the magnetization of vapor grown Mn 3 Si 2 Se 6 is shown for comparison; these vapor grown crystals do not show a sharp onset of magnetic anisotropy above 300K as was previously observed for melt grown Mn 3 Si 2 Se 6 crystals.

36 MATERIALS SCIENCE↗

Quasiparticle Spectroscopy, Transport, and Magnetic Properties of Nb Films Used in Superconducting Qubits

Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, the London penetration depth - based quasiparticle spectroscopy, and real-space real-time magneto-optical imaging. Here we study niobium films to provide an example of a comprehensive analytical set that may benefit superconducting circuits such as those used in quantum computers. The films have a superconducting transition temperature of T c = 9.35 K and a fairly clean superconducting gap. The estimated superfluid density is enhanced at intermediate temperatures. These observations are consistent with the recent theory of anisotropic strong-coupling superconductivity in Nb and indicate outstanding quality. However, the response to the magnetic field is complicated, exhibiting significantly irreversible behavior and insufficient heat dissipation (to a substrate), leading to thermomagnetic instabilities. This may present a challenge for further improvement of transmon quantum coherence. Possible mitigation strategies are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗