Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Precision orbit computations for Starlette

The Starlette satellite, launched in February 1975 was designed to minimize the effects of nongravitational forces and to obtain the highest possible accuracy for laser range measurements. Analyses of the first four months of laser tracking data from nine stations have confirmed the stability of the orbit and the precision to which the satellite's position can be established. Initial orbit computations using the GSFC GEM - 7 gravity model produced rms fits of about 8 to 10 meters for arc lengths of 5 days. After tailoring a gravity model specifically to Starlette, the rms fits for the 5 day arcs were reduced significantly to the 1 to 2 meter level. An rms fit of 4.3 meters was obtained for a 90 day arc. Five day arcs overlapped by 2.5 days showed rms satellite position differences generally less than 2 meters. Prediction errors at the end of two months were less than 30 milliseconds.

Marsh, J. G.↗

A Sensitivity-informed, Process Model Abstraction Implementation in GoldSim - 19276

System-level Performance Assessment (PA) models rely on specific process-level models for some inputs, such as infiltration. For probabilistic PA, the value of the process model output depends on the values of input parameters that also vary in the PA model. The simplest conceptual solution is to draw values of the input parameters from their distributions, run the process level model at these values, and then use the output where it is needed in the PA model. However, this solution is unsatisfactory for multiple reasons: (1) the PA Model should be set up such that new runs can be made and distributions can change without having to go back and run the process-level model; (2) calling the process model from the system model is possible, but technical difficulties remain in coupling the two; and (3) there is no uncertainty in the process-level model results incorporated into the PA model. Therefore, it is desirable to develop a method that maps the values of PA Model inputs to process level model outputs, in real time within the PA Model set up and using as simple of a map as possible without losing key features of the relationship. This has been termed 'model abstraction' because information about process model runs is 'abstracted' to be used with the PA model. A simple 'nearest neighbor' abstraction approach is presented to overcome these problems, in which a sensitivity-informed distance metric is used to map a system-level model realization to the most appropriate process-level model realization. (authors)

97 MATHEMATICS AND COMPUTING↗

LABORATORY STUDY OF RATE COEFFICIENTS FOR H{sub 2}O:He INELASTIC COLLISIONS BETWEEN 20 AND 120 K

State-to-state rate coefficients for ortho-H{sub 2}O:He and para-H{sub 2}O:He inelastic collisions in the 20-120 K thermal range are investigated by means of an improved experimental procedure. This procedure is based on the use of a kinetic master equation (MEQ) which describes the evolution of populations of H{sub 2}O rotational levels along a supersonic jet of H{sub 2}O highly diluted in helium. The MEQ is expressed in terms of experimental observables and rate coefficients for H{sub 2}O:He inelastic collisions. The primary experimental observables are the local number density and the populations of the rotational energy levels of H{sub 2}O, quantities which are determined along the jet with unprecedented accuracy by means of Raman spectroscopy with high space resolution. Sets of rate coefficients from the literature and from present close-coupling calculations using two different potential energy surfaces (PESs) have been tested against the experiment. The Green et al. rate coefficients are up to 50% too low compared to the experiment, while most rates calculated here from the Hodges et al. PES and the Patkowski et al. PES are much closer to the experimental values. Experimental rates with an estimated accuracy on the order of 10% have been obtained for ortho-H{sub 2}O:He and para-H{sub 2}O:He inelastic collisions between 20 and 120 K by scaling and averaging the theoretical rates to the experiment.

74 ATOMIC AND MOLECULAR PHYSICS↗

Photoionization of tungsten ions: experiment and theory for ${{\rm{W}}}^{2+}$ and ${{\rm{W}}}^{3+}$

Experimental and theoretical results are reported for single-photon single ionization of W 2+ and W 3+ tungsten ions. Experiments were performed at the photon-ion merged-beam setup of the Advanced Light Source in Berkeley. Absolute cross sections and detailed energy scans were measured over an energy range 20-90 eV at a bandwidth of 100 meV. Broad peak features with widths typically around 5 eV have been observed with almost no narrow resonances present in the investigated energy range. Theoretical results were obtained from a Dirac-Coulomb R-matrix approach. The calculations were carried out for the lowest-energy terms of the investigated tungsten ions with levels 5s 2 5p 6 5d 4 5 D J J = 0, 1, 2, 3, 4 for W 2+ and 5s 2 5p 6 5d 3 4 F J ' J ' = 3/2, 5/2, 7/2, 9/2 for W 3+ . Assuming a statistically weighted distribution of ions in the initial ground-term levels there is good agreement of theory and experiment for W 3+ ions. However, for W 2+ ions at higher energies there is a factor of approximately two difference between experimental and theoretical cross sections.

74 ATOMIC AND MOLECULAR PHYSICS↗

Determination of Chlorophyll Content in Selected Grass Communities of Krkonoše Mts. Tundra Based on Laboratory Spectroscopy and Aerial Hyperspectral Data

The study focuses on the determination of chlorophyll content in four prevailing grasses in the relict arctic-alpine tundra located in the Krkonoše Mountains National Park, Czech Republic. We compared two methods for determination of leaf chlorophyll content (LCC) – spectrophotometric determination in the laboratory, and the LCC assessed by fluorescence portable chlorophyll meter CCM-300. Relationships were established between the LCCs and vegetation indices calculated from leaf spectra acquired with contact probe coupled with an ASD FieldSpec4 Wide-Res spectroradiometer. Canopy chlorophyll contents (CCC) were computed from the LCCs and green leaf area index (LAI), and modelled based on the field spectra measured by the spectroradiometer and the hyperspectral images acquired by Headwall Nano-Hyperspec® mounted on the DJI Matrice 600 Pro drone. The calculations are performed on datasets acquired in June, July and August 2020 together and separately for species and months. In general, the correlations based on June datasets work the best at both levels: median R 2 for all indices was 0.52 for all species together at leaf level and median R 2 = 0.47 at the canopy level (vegetation indices computed from field spectra). Canopy chlorophyll content map was created based on the results of stepwise multiple linear regression. The R 2 was 0.42 when using four wavelengths from the red and red edge spectral region. We attribute the weak model performance to a combination of several factors: leaf structure may bias LCC from laboratory measurements, effects of LAI variability on CCC, and the sampling design, probably not covering the whole phenology equally for all studied species.

L. Cervena↗

Selective Sorbent Design: CaS Aerogel for Rapid Remediation of Aqueous Pb (II)

Heavy metals are a persistent environmental problem due to their high toxicity, even at very low concentrations (parts per billion, ppb). The removal of such diluted heavy metals is challenging because of the competition the counterions (Ca 2+ , Na + , Mg 2+ , etc.) present in natural water bodies. The design of sorbents capable of removing ions below the action limit (15 ppb for Pb 2+ ) requires a strong driving force for selective uptake and rapid removal. In this work, we report the synthesis of porous CaS aerogels (surface area = 143.6 m 2 /g) by oxidative assembly of CaS nanoparticles and describe their use in selective Pb 2+ ion remediation from water. Despite the presence of amorphous CaCO 3 (up to 50 wt %) in the gel network, the gels demonstrated a capacity of 17.1 mmol Pb/g aerogel (3543 mg/g), and this could be augmented to 22.5 mmol Pb/g aerogel (4593 mg/g) by modifying the synthesis to reduce CaCO 3 content to ca. 15 wt %. Moreover, the selectivity of CaS aerogels toward Pb 2+ ions is high, as evidenced by little-to-no change in the distribution constant (K d ∼ 10 4 ) in the presence of competing ions (1 M) such as Na + , Mg 2+ , and Ca 2+ . During remediation with low concentrations (100 ppb) of Pb 2+ with CaS aerogels, the level of Pb 2+ dropped to 5.4 ppb (below the 15 ppb EPA limit) within 1 h with a 95.4% removal efficiency. In contrast to the CO 2 supercritically dried aerogels, lower surface area ambient dried gels (xerogels) only remove 40% of the lead ions from a 100 ppb solution, saturating within 1 h. The efficiency and rapidity of selective Pb 2+ uptake using CdS aerogels arise from a combination of a strong thermodynamic driving force for cation exchange (K eq = 2.5 × 10 27 ) and chemisorption along with favorable kinetics associated with the high surface area porous architecture. These results show that formation of high surface area metal chalcogenide aerogels by oxidative assembly to form nanocrystalline architectures, as previously demonstrated for II−VI and IV−VI semiconductors, can be extended to the more highly ionic alkaline earth sulfides.

Aerogels↗

Evidence for an Electronic State at the Interface between the SnO 2 Core and the TiO 2 Shell in Mesoporous SnO 2 /TiO 2 Thin Films

A comparative spectroelectrochemical study of micron thick mesoporous thin films composed of TiO 2 and SnO 2 nanocrystallites was undertaken to identify the location and identity of electronic state(s) in core/shell SnO 2 /TiO 2 films that have emerging applications in energy science. The mesoporous TiO 2 and SnO 2 films were synthesized by sol–gel techniques, and the core/shell material was created by atomic layer deposition of a TiO 2 shell on a SnO 2 core. Electrochemical reduction of these materials in aqueous electrolytes resulted in a blue shift of the fundamental VB → CB absorbance as well as a broad absorbance across the visible region. For SnO 2 , three unique spectra were required to model the potential dependent data while only one unique spectrum was needed to model the corresponding data for SnO 2 /TiO 2 and TiO 2 . Significantly, standard addition of the spectra measured for SnO 2 and TiO 2 did not model that for SnO 2 /TiO 2 . In other words, upon reduction of SnO 2 /TiO 2 there was no spectroscopic evidence for electrons residing in the SnO 2 core or in the TiO 2 shell. Instead, the appearance of a single potential-independent absorption spectrum was observed and attributed to electrons present within an interfacial region between the core and the shell. The charge extraction technique was used to determine that the density of SnO 2 /TiO 2 states was more similar to that of TiO 2 than SnO 2 . The potential onset followed the trend SnO 2 /TiO 2 > SnO 2 > TiO 2 , with TiO 2 closest to the vacuum level and SnO 2 /TiO 2 the furthest away. The implications of these results for solar energy conversion are discussed.

14 SOLAR ENERGY↗

Sound speed and viscosity of semi-relativistic relic neutrinos

Generalized fluid equations, using sound speed c {sub eff}{sup 2} and viscosity c {sub vis}{sup 2} as effective parameters, provide a convenient phenomenological formalism for testing the relic neutrino 'null hypothesis,' i.e. that that neutrinos are relativistic and free-streaming prior to recombination. In this work, we relax the relativistic assumption and ask 'to what extent can the generalized fluid equations accommodate finite neutrino mass?' We consider both the mass of active neutrinos, which are largely still relativistic at recombination m {sup 2} / T {sup 2} ∼ 0.2, and the effect of a semi-relativistic sterile component. While there is no one-to-one mapping between mass/mixing parameters and c {sub eff}{sup 2} and c {sub vis}{sup 2}, we demonstrate that the existence of a neutrino mass could induce a bias to measurements of c {sub eff}{sup 2} and c {sub vis}{sup 2} at the level of 0.01 m {sup 2} / T {sup 2} ∼ 10{sup -3}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Origin of fine oscillations in the photoluminescence spectrum of 2-dimensional electron gas formed in AlGaN/GaN high electron mobility transistor structures

An unambiguous identification of the fine oscillations observed in the low temperature photoluminescence (PL) spectra of AlGaN/GaN based high electron mobility transistor (HEMT) structures is carried out. In literature, such oscillations have been erroneously identified as the sub-levels of 2-dimensional electron gas (2DEG) formed at AlGaN/GaN heterointerface. Here, the origin of these oscillations is probed by performing the angle dependent PL and reflectivity measurements under identical conditions. Contrary to the reports available in literature, we find that the fine oscillations are not related to 2DEG sub-levels. The optical characteristics of these oscillations are mainly governed by an interference phenomenon. In particular, peculiar temperature dependent redshift and excitation intensity dependent blueshift, which have been interpreted as the characteristics of 2DEG sub-levels in HEMT structures by other researchers, are understood by invoking the wavelength and temperature dependence of the refractive index of GaN within the framework of interference phenomenon. The results of other researchers are also consistently explained by considering the fine oscillatory features as the interference oscillations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase I Trial Using the Proteasome Inhibitor Bortezomib and Concurrent Chemoradiotherapy for Head-and-Neck Malignancies

Purpose: Advanced head-and-neck cancer (HNC) remains a difficult disease to cure. Proteasome inhibitors such as bortezomib have the potential to improve survival over chemoradiotherapy alone. This Phase I dose-escalation study examined the potential of bortezomib in combination with cisplatin chemotherapy and concurrent radiation in the treatment of locally advanced and recurrent HNC. Methods and Materials: Eligible patients received cisplatin once weekly at 30 mg/m{sup 2} per week and bortezomib along with concurrent radiation. Bortezomib was given on Days 1, 4, 8, and 11 every 3 weeks, with an initial starting dose of 0.7 mg/m{sup 2} and escalation levels of 1.0 and 1.3 mg/m{sup 2}. Dose escalation was performed only after assessment to rule out any dose-limiting toxicity. Results: We enrolled 27 patients with HNC, including 17 patients with recurrent disease who had received prior irradiation. Patients received bortezomib dose levels of 0.7 mg/m{sup 2} (7 patients), 1.0 mg/m{sup 2} (10 patients), and 1.3 mg/m{sup 2} (10 patients). No Grade 5 toxicities, 3 Grade 4 toxicities (all hematologic and considered dose-limiting toxicities), and 39 Grade 3 toxicities (in 20 patients) were observed. With a median follow-up of 7.4 months, the overall median survival was 24.7 months (48.4 months for advanced HNC patients and 15.4 months for recurrent HNC patients). Conclusion: Bortezomib in combination with radiation therapy and cisplatin chemotherapy is safe in the treatment of HNC with a bortezomib maximum tolerated dose of 1.0 mg/m{sup 2} in patients previously treated for HNC and 1.3 mg/m{sup 2} in radiation-naive patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

BENCH-SCALE STEAM REFORMING OF ACTUAL TANK 48H WASTE

Fluidized Bed Steam Reforming (FBSR) has been demonstrated to be a viable technology to remove >99% of the organics from Tank 48H simulant, to remove >99% of the nitrate/nitrite from Tank 48H simulant, and to form a solid product that is primarily carbonate based. The technology was demonstrated in October of 2006 in the Engineering Scale Test Demonstration Fluidized Bed Steam Reformer1 (ESTD FBSR) at the Hazen Research Inc. (HRI) facility in Golden, CO. The purpose of the Bench-scale Steam Reformer (BSR) testing was to demonstrate that the same reactions occur and the same product is formed when steam reforming actual radioactive Tank 48H waste. The approach used in the current study was to test the BSR with the same Tank 48H simulant and same Erwin coal as was used at the ESTD FBSR under the same operating conditions. This comparison would allow verification that the same chemical reactions occur in both the BSR and ESTD FBSR. Then, actual radioactive Tank 48H material would be steam reformed in the BSR to verify that the actual tank 48H sample reacts the same way chemically as the simulant Tank 48H material. The conclusions from the BSR study and comparison to the ESTD FBSR are the following: (1) A Bench-scale Steam Reforming (BSR) unit was successfully designed and built that: (a) Emulated the chemistry of the ESTD FBSR Denitration Mineralization Reformer (DMR) and Carbon Reduction Reformer (CRR) known collectively as the dual reformer flowsheet. (b) Measured and controlled the off-gas stream. (c) Processed real (radioactive) Tank 48H waste. (d) Met the standards and specifications for radiological testing in the Savannah River National Laboratory (SRNL) Shielded Cells Facility (SCF). (2) Three runs with radioactive Tank 48H material were performed. (3) The Tetraphenylborate (TPB) was destroyed to > 99% for all radioactive Bench-scale tests. (4) The feed nitrate/nitrite was destroyed to >99% for all radioactive BSR tests the same as the ESTD FBSR. (5) The radioactive Tank 48H DMR product was primarily made up of soluble carbonates. The three most abundant species were thermonatrite, [Na{sub 2}CO{sub 3} {center_dot} H{sub 2}O], sodium carbonate, [Na{sub 2}CO{sub 3}], and trona, [Na{sub 3}H(CO{sub 3}){sub 2} {center_dot} 2H{sub 2}O] the same as the ESTD FBSR. (6) Insoluble solids analyzed by X-Ray Diffraction (XRD) did not detect insoluble carbonate species. However, they still may be present at levels below 2 wt%, the sensitivity of the XRD methodology. Insoluble solids XRD characterization indicated that various Fe/Ni/Cr/Mn phases are present. These crystalline phases are associated with the insoluble sludge components of Tank 48H slurry and impurities in the Erwin coal ash. The percent insoluble solids, which mainly consist of un-burnt coal and coal ash, in the products were 4 to 11 wt% for the radioactive runs. (7) The Fe{sup +2}/Fe{sub total} REDOX measurements ranged from 0.58 to 1 for the three radioactive Bench-scale tests. REDOX measurements > 0.5 showed a reducing atmosphere was maintained in the DMR indicating that pyrolysis was occurring. (8) Greater than 90% of the radioactivity was captured in the product for all three runs. (9) The collective results from the FBSR simulant tests and the BSR simulant tests indicate that the same chemistry occurs in the two reactors. (10) The collective results from the BSR simulant runs and the BSR radioactive waste runs indicates that the same chemistry occurs in the simulant as in the real waste. The FBSR technology has been proven to destroy the organics and nitrates in the Tank 48H waste and form the anticipated solid carbonate phases as expected.

01 COAL, LIGNITE, AND PEAT↗

Climate model projections from the Scenario Model Intercomparison Project (ScenarioMIP) of CMIP6

Abstract. The Scenario Model Intercomparison Project (ScenarioMIP) defines and coordinates the main set of future climate projections, based on concentration-driven simulations, within the Coupled Model Intercomparison Project phase 6 (CMIP6). This paper presents a range of its outcomes by synthesizing results from the participating global coupled Earth system models. We limit our scope to the analysis of strictly geophysical outcomes: mainly global averages and spatial patterns of change for surface air temperature and precipitation. We also compare CMIP6 projections to CMIP5 results, especially for those scenarios that were designed to provide continuity across the CMIP phases, at the same time highlighting important differences in forcing composition, as well as in results. The range of future temperature and precipitation changes by the end of the century (2081–2100) encompassing the Tier 1 experiments based on the Shared Socioeconomic Pathway (SSP) scenarios (SSP1-2.6, SSP2-4.5, SSP3-7.0 and SSP5-8.5) and SSP1-1.9 spans a larger range of outcomes compared to CMIP5, due to higher warming (by close to 1.5 ∘C) reached at the upper end of the 5 %–95 % envelope of the highest scenario (SSP5-8.5). This is due to both the wider range of radiative forcing that the new scenarios cover and the higher climate sensitivities in some of the new models compared to their CMIP5 predecessors. Spatial patterns of change for temperature and precipitation averaged over models and scenarios have familiar features, and an analysis of their variations confirms model structural differences to be the dominant source of uncertainty. Models also differ with respect to the size and evolution of internal variability as measured by individual models' initial condition ensemble spreads, according to a set of initial condition ensemble simulations available under SSP3-7.0. These experiments suggest a tendency for internal variability to decrease along the course of the century in this scenario, a result that will benefit from further analysis over a larger set of models. Benefits of mitigation, all else being equal in terms of societal drivers, appear clearly when comparing scenarios developed under the same SSP but to which different degrees of mitigation have been applied. It is also found that a mild overshoot in temperature of a few decades around mid-century, as represented in SSP5-3.4OS, does not affect the end outcome of temperature and precipitation changes by 2100, which return to the same levels as those reached by the gradually increasing SSP4-3.4 (not erasing the possibility, however, that other aspects of the system may not be as easily reversible). Central estimates of the time at which the ensemble means of the different scenarios reach a given warming level might be biased by the inclusion of models that have shown faster warming in the historical period than the observed. Those estimates show all scenarios reaching 1.5 ∘C of warming compared to the 1850–1900 baseline in the second half of the current decade, with the time span between slow and fast warming covering between 20 and 27 years from present. The warming level of 2 ∘C of warming is reached as early as 2039 by the ensemble mean under SSP5-8.5 but as late as the mid-2060s under SSP1-2.6. The highest warming level considered (5 ∘C) is reached by the ensemble mean only under SSP5-8.5 and not until the mid-2090s.

54 ENVIRONMENTAL SCIENCES↗

Comments on ocean circulation with regard to satellite altimetry

Basic features of sea surface topography are reviewed, to show those oceanographic results which may be of value to a geodetic satellite program: (1) the shape and magnitude of the large scale features of the mean sea surface, relative to a level surface; (2) the position and magnitude of the slopes across the western boundary currents, from a variety of data; (3) an estimate of the position of the geoid, tied into the U.S. leveling network; and (4) a documented change of 60 to 70 cm in mean sea level, with respect to the geoid, between the U.S. east and west coasts.

Sturges, W.↗

Space Station Biological Research Project

To meet NASA's objective of using the unique aspects of the space environment to expand fundamental knowledge in the biological sciences, the Space Station Biological Research Project at Ames Research Center is developing, or providing oversight, for two major suites of hardware which will be installed on the International Space Station (ISS). The first, the Gravitational Biology Facility, consists of Habitats to support plants, rodents, cells, aquatic specimens, avian and reptilian eggs, and insects and the Habitat Holding Rack in which to house them at microgravity; the second, the Centrifuge Facility, consists of a 2.5 m diameter centrifuge that will provide acceleration levels between 0.01 g and 2.0 g and a Life Sciences Glovebox. These two facilities will support the conduct of experiments to: 1) investigate the effect of microgravity on living systems; 2) what level of gravity is required to maintain normal form and function, and 3) study the use of artificial gravity as a countermeasure to the deleterious effects of microgravity observed in the crew. Upon completion, the ISS will have three complementary laboratory modules provided by NASA, the European Space Agency and the Japanese space agency, NASDA. Use of all facilities in each of the modules will be available to investigators from participating space agencies. With the advent of the ISS, space-based gravitational biology research will transition from 10-16 day short-duration Space Shuttle flights to 90-day-or-longer ISS increments.

NASA Discipline General Space Life Sciences↗

Climate model projections from the Scenario Model Intercomparison Project (ScenarioMIP) of CMIP6

The Scenario Model Intercomparison Project (ScenarioMIP) defines and coordinates the main set of future climate projections, based on concentration-driven simulations, within the Coupled Model Intercomparison Project phase 6 (CMIP6). This paper presents a range of its outcomes by synthesizing results from the participating global coupled Earth system models. We limit our scope to the analysis of strictly geophysical outcomes: mainly global averages and spatial patterns of change for surface air temperature and precipitation. We also compare CMIP6 projections to CMIP5 results, especially for those scenarios that were designed to provide continuity across the CMIP phases, at the same time highlighting important differences in forcing composition, as well as in results. The range of future temperature and precipitation changes by the end of the century (2081–2100) encompassing the Tier 1 experiments based on the Shared Socioeconomic Pathway (SSP) scenarios (SSP1-2.6, SSP2-4.5, SSP3-7.0 and SSP5-8.5) and SSP1-1.9 spans a larger range of outcomes compared to CMIP5, due to higher warming (by close to 1.5 °C) reached at the upper end of the 5 %–95 % envelope of the highest scenario (SSP5-8.5). This is due to both the wider range of radiative forcing that the new scenarios cover and the higher climate sensitivities in some of the new models compared to their CMIP5 predecessors. Spatial patterns of change for temperature and precipitation averaged over models and scenarios have familiar features, and an analysis of their variations confirms model structural differences to be the dominant source of uncertainty. Models also differ with respect to the size and evolution of internal variability as measured by individual models' initial condition ensemble spreads, according to a set of initial condition ensemble simulations available under SSP3-7.0. These experiments suggest a tendency for internal variability to decrease along the course of the century in this scenario, a result that will benefit from further analysis over a larger set of models. Benefits of mitigation, all else being equal in terms of societal drivers, appear clearly when comparing scenarios developed under the same SSP but to which different degrees of mitigation have been applied. It is also found that a mild overshoot in temperature of a few decades around mid-century, as represented in SSP5-3.4OS, does not affect the end outcome of temperature and precipitation changes by 2100, which return to the same levels as those reached by the gradually increasing SSP4-3.4 (not erasing the possibility, however, that other aspects of the system may not be as easily reversible). Central estimates of the time at which the ensemble means of the different scenarios reach a given warming level might be biased by the inclusion of models that have shown faster warming in the historical period than the observed. Those estimates show all scenarios reaching 1.5 °C of warming compared to the 1850–1900 baseline in the second half of the current decade, with the time span between slow and fast warming covering between 20 and 27 years from present. The warming level of 2 °C of warming is reached as early as 2039 by the ensemble mean under SSP5-8.5 but as late as the mid-2060s under SSP1-2.6. The highest warming level considered (5 °C) is reached by the ensemble mean only under SSP5-8.5 and not until the mid-2090s.d-2090s.

Scenario Model Intercomparison Project (ScenarioMI↗

Low-temperature heat capacity of triangle antiferromagnetic molecular clusters K{sub 12}[(VO){sub 3}(SbW{sub 9}O{sub 33}){sub 2}].15H{sub 2}O and K{sub 12}[(VO){sub 3}(BiW{sub 9}O{sub 33}){sub 2}].29H{sub 2}O

Energy level diagrams have been determined for two molecular clusters, K{sub 12}[(VO){sub 3}(SbW{sub 9}O{sub 33}){sub 2}].15H{sub 2}O and K{sub 12}[(VO){sub 3}(BiW{sub 9}O{sub 33}){sub 2}].29H{sub 2}O, by low-temperature heat capacity measurements down to 85 mK under magnetic field strengths up to 9 T. Both compounds exhibit a broad heat capacity peak dependent upon the magnetic field, which can be explained by the thermal excitation in the magnetic energy levels. A detailed analysis based on the numerical calculation reveals that the spin-spin interaction between the V{sup 4+} ions includes a Dzyaloshinskii-Moriya interaction. - Graphical abstract: Temperature dependence of heat capacity for K{sub 12}[(VO){sub 3}(SbW{sub 9}O{sub 33}){sub 2}].15H{sub 2}O below 5 K. This is well described by the model with a doublet ground state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Biotransformation of 2,3,3,3-tetrafluoropropene (HFO-1234yf) in male, pregnant and non-pregnant female rabbits after single high dose inhalation exposure

2,3,3,3-Tetrafluoropropene (HFO-1234yf) is a novel refrigerant intended for use in mobile air conditioning. It showed a low potential for toxicity in rodents studies with most NOAELs well above 10,000 ppm in guideline compliant toxicity studies. However, a developmental toxicity study in rabbits showed mortality at exposure levels of 5,500 ppm and above. No lethality was observed at exposure levels of 2,500 and 4,000 ppm. Nevertheless, increased subacute inflammatory heart lesions were observed in rabbits at all exposure levels. Since the lethality in pregnant animals may be due to altered biotransformation of HFO-1234yf and to evaluate the potential risk to pregnant women facing a car crash, this study compared the acute toxicity and biotransformation of HFO-1234yf in male, female and pregnant female rabbits. Animals were exposed to 50,000 ppm and 100,000 ppm for 1 h. For metabolite identification by {sup 19}F NMR and LC/MS-MS, urine was collected for 48 h after inhalation exposure. In all samples, the predominant metabolites were S-(3,3,3-trifluoro-2-hydroxypropanyl)-mercaptolactic acid and N-acetyl-S-(3,3,3-trifluoro-2-hydroxypropanyl)-L-cysteine. Since no major differences in urinary metabolite pattern were observed between the groups, only N-acetyl-S-(3,3,3-trifluoro-2-hydroxypropanyl)-L-cysteine excretion was quantified. No significant differences in recovery between non-pregnant (43.10 ± 22.35 μmol) and pregnant female (50.47 ± 19.72 μmol) rabbits were observed, male rabbits exposed to 100,000 ppm for one hour excreted 86.40 ± 38.87 μmol. Lethality and clinical signs of toxicity were not observed in any group. The results suggest that the lethality of HFO-1234yf in pregnant rabbits unlikely is due to changes in biotransformation patterns or capacity in pregnant rabbits. -- Highlights: ► No lethality and clinical signs were observed. ► No differences in metabolic pattern between pregnant and non-pregnant rabbits. ► Rapid and similar metabolite excretion in all groups. ► Very low amount of biotransformation in all groups (< 0.1%).

60 APPLIED LIFE SCIENCES↗

EVIDENCE FOR BLACK HOLE GROWTH IN LOCAL ANALOGS TO LYMAN BREAK GALAXIES

We have used XMM-Newton to observe six Lyman break analogs (LBAs): members of the rare population of local galaxies that have properties that are very similar to distant Lyman break galaxies. Our six targets were specifically selected because they have optical emission-line properties that are intermediate between starbursts and Type 2 (obscured) active galactic nuclei (AGNs). Our new X-ray data provide an important diagnostic of the presence of an AGN. We find X-ray luminosities of order 10{sup 42} erg s{sup -1} and ratios of X-ray to far-IR luminosities that are higher than values in pure starburst galaxies by factors ranging from {approx}3 to 30. This strongly suggests the presence of an AGN in at least some of the galaxies. The ratios of the luminosities of the hard (2-10 keV) X-ray to [O III]{lambda}5007 emission line are low by about an order of magnitude compared with Type 1 AGN, but are consistent with the broad range seen in Type 2 AGN. Either the AGN hard X-rays are significantly obscured or the [O III] emission is dominated by the starburst. We searched for an iron emission line at {approx}6.4 keV, which is a key feature of obscured AGNs, but only detected emission at the {approx}2{sigma} level. Finally, we find that the ratios of the mid-infrared (24 {mu}m) continuum to [O III]{lambda}5007 luminosities in these LBAs are higher than the values for Type 2 AGN by an average of 0.8 dex. Combining all these clues, we conclude that an AGN is likely to be present, but that the bolometric luminosity is produced primarily by an intense starburst. If these black holes are radiating at the Eddington limit, their masses would lie in the range of 10{sup 5}-10{sup 6} M{sub sun}. These objects may offer ideal local laboratories to investigate the processes by which black holes grew in the early universe.

79 ASTRONOMY AND ASTROPHYSICS↗