SEARCH · Engineering Papers
Results for “LENGTH”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Preliminary measurements for a sub-femtosecond electron bunch length diagnostic
Not Available
Asphaltene Adsorption onto Self-Assembled Monolayers of Alkyltrichlorosilanes of Varying Chain Length
The adsorption of asphaltenes onto flat silica surfaces modified with self-assembled monolayers (SAMs) of alkyltrichlorosilanes of varying thickness due to a variable number of carbon atoms (N{sub C}) has been studied by means of contact angle measurements, spectroscopic ellipsometry, and near-edge X-ray absorption fine structure spectroscopy. The extent of asphaltene adsorption was found to depend primarily on the ability of the SAM layer to shield the underlying silicon substrate from interacting with the asphaltenes present in solution. Specifically, asphaltene adsorption decreased with an increase in NC and/or an increase in SAM grafting density, {sigma}{sub SAM}, (i.e., number of SAM molecules per unit area). The effect of the solvent quality on the extent of asphaltene adsorption was gauged by adsorbing asphaltenes from toluene, 1-methylnaphthalene, tetralin, decalin, and toluene-heptanes mixtures. The extent of asphaltene adsorption was found to increase proportionally with a decrease in the Hildebrand solubility parameter of the solvent.
Side-Chain Length and Dispersity in ROMP Polymers with Pore-Generating Side Chains for Gas Separations
Not Available
Physical Fidelity in Particle-In-Cell Modeling of Small Debye-Length Plasmas
The connection between macro-particle shape functions and non-physical phase-space 'heating' in the particle-in-cell (PIC) algorithm is examined. The development of fine-scale phase-space structures starting from a cold initial condition is shown to be related to spatial correlations in the interpolated fields used in the Lorentz force. It is shown that the plasma evolution via the PIC algorithm from a cold initial condition leads to a state that is not consistent with that of a thermal plasma.
Current Status of the Experiment on Direct Measurement of Neutron-Neutron Scattering Length at the Reactor YAGUAR
A new experiment was proposed in 2002 to perform the first direct measurement of neutron-neutron scattering on the powerful pulsed reactor YAGUAR located at Snezhinsk, Ural region, Russia. Extensive efforts were made to model the background conditions and to optimize the set-up design. To make the experiment feasible it was necessary to suppress the background from various origins by more than 16 orders of magnitude for thermal neutrons and 14 orders of magnitude for fast neutrons. In 2003 a channel was drilled under the reactor and equipped for time-of-flight measurements. During the next two years at this channel there were carried out a series of test experiments aimed at verifying the accuracy of the background modeling. Good agreement of the measured results with the calculated values enabled us to make the final design of the full scale set-up. During 2005-2006 the experimental system was manufactured. After vacuum tests at JINR the set-up was mounted at the YAGUAR reactor hall. In 2006-2007 calibration measurements with noble gases were performed. The results confirmed the validity of the modeling of the full scale experiment and verified the calibration. The first preliminary experiments for nn-scattering were performed in April 2008. These recent results are discussed.
On the origin of super-hot electrons from intense laser interactions with solid targets having moderate scale length preformed plasmas
We use particle-in-cell modeling to identify the acceleration mechanism responsible for the observed generation of super-hot electrons in ultra-intense laser-plasma interactions with solid targets with pre-formed plasma. We identify several features of direct laser acceleration that drive the generation of super-hot electrons. We find that, in this regime, electrons that become super-hot are primarily injected by a looping mechanism that we call loop-injected direct acceleration.
Effect of the C-bridge length on the ultraviolet-resistance of oxycarbosilane low-k films
The ultra-violet (UV) and vacuum ultra-violet (VUV) resistance of bridging alkylene groups in organosilica films has been investigated. Similar to the Si-CH{sub 3} (methyl) bonds, the Si-CH{sub 2}-Si (methylene) bonds are not affected by 5.6 eV irradiation. On the other hand, the concentration of the Si-CH{sub 2}-CH{sub 2}-Si (ethylene) groups decreases during such UV exposure. More significant difference in alkylene reduction is observed when the films are exposed to VUV (7.2 eV). The ethylene groups are depleted by more than 75% while only about 40% methylene and methyl groups loss is observed. The different sensitivity of bridging groups to VUV light should be taken into account during the development of curing and plasma etch processes of low-k materials based on periodic mesoporous organosilicas and oxycarbosilanes. The experimental results are qualitatively supported by ab-initio quantum-chemical calculations.
Simulated sensitivity of African terrestrial ecosystem photosynthesis to rainfall frequency, intensity, and rainy season length
Not Available
Spatially Resolved Measurements of Laser Filamentation in Long Scale Length Underdense Plasmas with and without Beam Smoothing
The onset of filamentation, following the interaction of a relatively long ({tau}{sub L}{approx_equal}1 ns) and intense (I{sub L}{approx_equal}5x10{sup 14} W/cm{sup 2}) laser pulse with a neopentane filled gas bag target, has been experimentally studied via the proton radiography technique, in conditions of direct relevance to the indirect drive inertial confinement fusion scheme. The density gradients associated with filamentation onset have been spatially resolved yielding direct and unambiguous evidence of filament formation and quantitative information about the filamentation mechanism in agreement with previous theoretical modelings. Experimental data confirm that, once spatially smoothed laser beams are used, filamentation is not a relevant phenomenon during the heating laser beams propagation through typical hohlraum gas fills.
Optical modeling of plasma-deposited ZnO films: Electron scattering at different length scales
In this work, an optical modeling study on electron scattering mechanisms in plasma-deposited ZnO layers is presented. Because various applications of ZnO films pose a limit on the electron carrier density due to its effect on the film transmittance, higher electron mobility values are generally preferred instead. Hence, insights into the electron scattering contributions affecting the carrier mobility are required. In optical models, the Drude oscillator is adopted to represent the free-electron contribution and the obtained optical mobility can be then correlated with the macroscopic material properties. However, the influence of scattering phenomena on the optical mobility depends on the considered range of photon energy. For example, the grain-boundary scattering is generally not probed by means of optical measurements and the ionized-impurity scattering contribution decreases toward higher photon energies. To understand this frequency dependence and quantify contributions from different scattering phenomena to the mobility, several case studies were analyzed in this work by means of spectroscopic ellipsometry and Fourier transform infrared (IR) spectroscopy. The obtained electrical parameters were compared to the results inferred by Hall measurements. For intrinsic ZnO (i-ZnO), the in-grain mobility was obtained by fitting reflection data with a normal Drude model in the IR range. For Al-doped ZnO (Al:ZnO), besides a normal Drude fit in the IR range, an Extended Drude fit in the UV-vis range could be used to obtain the in-grain mobility. Scattering mechanisms for a thickness series of Al:ZnO films were discerned using the more intuitive parameter “scattering frequency” instead of the parameter “mobility”. The interaction distance concept was introduced to give a physical interpretation to the frequency dependence of the scattering frequency. This physical interpretation furthermore allows the prediction of which Drude models can be used in a specific frequency range.
Precise Sound Velocity Measurements on Solids and Liquids at High Pressure and High Temperature with Direct Length Measurement
Sound velocity measurements at pressure and/or temperature provide important information in the material's structural behavior and physical properties under extreme conditions. With the application of synchrotron X-radiation sources, new developments have emerged to facilitate the study properties and structures of crystalline and amorphous materials. In the last decade, we have developed a unique technique for measuring sound velocity in a cubic type multianvil apparatus installed at X-17B2, National Synchrotron Light Source (NSLS) of Brookhaven National Lab, which allows us to conduct precise velocity measurements on crystalline and noncrystalline materials at various pressure and temperature conditions by conducting simultaneous X-radiation and ultrasonic interferometry measurements. In this paper, sound velocities at high temperatures for some ceramics and metals are measured to study the behavior and property change of these materials undergoing compression/expansion as well as phase transition and structural instabilities. This technique opens new opportunities for the study of materials that are of interest to many disciplines, such as earth science, materials science, and condensed matter physics.
Erratum to: 'Rarefied Gas Flow through a Channel of Finite Length into a Vacuum'
No abstract prepared.
Tank Tests of a 1/10-size Model of a Hypothetical Flying Boat with a Hull Length-beam Ratio of 9.0
Explore the source record for details and available documents.
Hydrodynamic Qualities of a Hypothetical Flying Boat with a Low-drag Hull Having a Length-beam Ratio of 15
Explore the source record for details and available documents.
Spray Characteristics of Four Flying-boat Hulls as Affected by Length-beam Ratio
Explore the source record for details and available documents.
Effect of Hull Length-beam Ratio on the Hydrodynamic Characteristics of Flying Boats in Waves
Explore the source record for details and available documents.
Effect of Forebody Warp on the Hydrodynamic Qualities of a Hypothetical Flying Boat Having a Hull Length-beam Ratio of 15
Explore the source record for details and available documents.