Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Investigation of channel width-dependent threshold voltage variation in a-InGaZnO thin-film transistors

This Letter investigates abnormal channel width-dependent threshold voltage variation in amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistors. Unlike drain-induced source barrier lowering effect, threshold voltage increases with increasing drain voltage. Furthermore, the wider the channel, the larger the threshold voltage observed. Because of the surrounding oxide and other thermal insulating material and the low thermal conductivity of the IGZO layer, the self-heating effect will be pronounced in wider channel devices and those with a larger operating drain bias. To further clarify the physical mechanism, fast IV measurement is utilized to demonstrate the self-heating induced anomalous channel width-dependent threshold voltage variation.

36 MATERIALS SCIENCE↗

Plasma treatment effect on charge carrier concentrations and surface traps in a-InGaZnO thin-film transistors

Various plasma treatment effects such as oxygen (O{sub 2}), nitrogen (N{sub 2}), and argon (Ar) on amorphous indium gallium zinc oxide thin-film transistors (a-IGZO TFTs) are investigated. To study oxygen stoichiometry in a-IGZO TFTs with respect to various plasma environments, X-ray photoelectron spectroscopy was employed. The results showed that oxygen vacancies were reduced by O{sub 2} and N{sub 2} plasmas while they were increased after Ar plasma treatment. Additionally, the effects of plasma treatment on trap distribution in bulk and surface channels were explored by means of low-frequency noise analysis. Details of the mechanisms used for generating and restoring traps on the surface and bulk channel are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Schottky contacts to In{sub 2}O{sub 3}

n-type binary compound semiconductors such as InN, InAs, or In{sub 2}O{sub 3} are especial because the branch-point energy or charge neutrality level lies within the conduction band. Their tendency to form a surface electron accumulation layer prevents the formation of rectifying Schottky contacts. Utilizing a reactive sputtering process in an oxygen-containing atmosphere, we demonstrate Schottky barrier diodes on indium oxide thin films with rectifying properties being sufficient for space charge layer spectroscopy. Conventional non-reactive sputtering resulted in ohmic contacts. We compare the rectification of Pt, Pd, and Au Schottky contacts on In{sub 2}O{sub 3} and discuss temperature-dependent current-voltage characteristics of Pt/In{sub 2}O{sub 3} in detail. The results substantiate the picture of oxygen vacancies being the source of electrons accumulating at the surface, however, the position of the charge neutrality level and/or the prediction of Schottky barrier heights from it are questioned.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-annihilation of inversion domains by high energy defects in III-Nitrides

Low-defect density InN films were grown on Si(111) by molecular beam epitaxy over an ∼1 μm thick GaN/AlN buffer/nucleation layer. Electron microscopy observations revealed the presence of inverse polarity domains propagating across the GaN layer and terminating at the sharp GaN/InN (0001{sup ¯}) interface, whereas no inversion domains were detected in InN. The systematic annihilation of GaN inversion domains at the GaN/InN interface is explained in terms of indium incorporation on the Ga-terminated inversion domains forming a metal bonded In-Ga bilayer, a structural instability known as the basal inversion domain boundary, during the initial stages of InN growth on GaN.

36 MATERIALS SCIENCE↗

Modeling and simulation of CuIn{sub 1−x}Ga{sub x}Se{sub 2} based thin film solar cell

In this work, CIGS (Copper Indium Gallium Diselenide) based solar cell structure has been simulated. We have been calculated short circuit current, open circuit voltage and efficiency of the cell. The thickness of the absorption layer is varied from 400 to 3000 nm, keeping the thickness of other layers unchanged. The effect of absorption layer thickness over cell performance has been analyzed and found that the efficiency increases upto 22% until the thickness of the absorption layer reaches around 2000 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of In{sub 3+} substitution on structural properties, cation distribution and Mössbauer spectra of CoFe{sub 2}O{sub 4} ferrite

The use of non-destructive, high resolution technique namely Mössbauer spectroscopy is discussed in detail for the investigation of structural and magnetic properties of Fe based indium substituted cobalt ferrites. The polycrystalline samples of CoFe{sub 2−x}In{sub x}O{sub 4} (x = 0.2, 0.6) were prepared by double sintering solid state reaction method. To ensure a single phase formation of the as prepared samples the X-ray diffraction (XRD) data of the powdered samples was Rietveld refined using Fd3m space group. An excellent agreement is obtained between the integrated intensity ratios of 57 Fe spectra at A- and B-sites and those calculated on the basis of cation distribution the cation distribution obtained data analysis. The results of Mössbauer spectra and cation distribution are also correlated well with magnetization versus applied field (M-H) study.

36 MATERIALS SCIENCE↗

Electronic structure evolution and energy level alignment at C{sub 60}/4,4′-cyclohexylidenebis[N,N-bis(4-methylphenyl) benzenamine]/MoO{sub x}/indium tin oxide interfaces

The electronic structure evolution and energy level alignment have been investigated at interfaces comprising fullerene (C{sub 60})/4,4′-cyclohexylidenebis[N,N-bis(4-methylphenyl) benzenamine] (TAPC)/ molybdenum oxide (MoO{sub x})/ indium tin oxide with ultraviolet photoemission spectroscopy and inverse photoemission spectroscopy. With deposition of TAPC upon MoO{sub x}, a dipole of 1.58 eV was formed at the TAPC/MoO{sub x} interface due to electron transfer from TAPC to MoO{sub x}. The highest occupied molecular orbital (HOMO) onset of TAPC was pinned closed to the Fermi level, leading to a p-doped region and thus increasing the carrier concentration at the very interface. The downward band bending and the resulting built-in field in TAPC were favorable for the hole transfer toward the TAPC/MoO{sub x} interface. The rigid downward shift of energy levels of TAPC indicated no significant interface chemistry at the interface. With subsequent deposition of C{sub 60} on TAPC, a dipole of 0.27 eV was observed at the C{sub 60}/TAPC heterojunction due to the electron transfer from TAPC to C{sub 60}. This led to a drop of the HOMO of TAPC near the C{sub 60}/TAPC interface, and hence further enhanced the band bending in TAPC. The band bending behavior was also observed in C{sub 60}, similarly creating a built-in field in C{sub 60} film and improving the electron transfer away from the C{sub 60}/TAPC interface. It can be deduced from the interface analysis that a promising maximum open circuit voltage of 1.5 eV is achievable in C{sub 60}/TAPC-based organic photovoltaic cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The discrepancies between theory and experiment in the optical emission of monolayer In(Ga)N quantum wells revisited by transmission electron microscopy

Quantitative high resolution transmission electron microscopy studies of intentionally grown 1InN/nGaN short-period superlattices (SLs) were performed. The structures were found to consist of an In{sub x}Ga{sub 1−x}N monolayer with an Indium content of x = 0.33 instead of the intended x = 1. Self-consistent calculations of the band structures of 1In{sub 0.33}Ga{sub 0.67}N/nGaN SLs were carried out, including a semi-empirical correction for the band gaps. The calculated band gap, E{sub g,} as well as its pressure derivative, dE{sub g}/dp, are in very good agreement with the measured photoluminescence energy, E{sub PL}, and its pressure derivative, dE{sub PL}/dp, for a series of 1In{sub 0.33}Ga{sub 0.67}N/nGaN samples with n ranging from 2 to 40. This resolves a discrepancy found earlier between measured and calculated optical emission properties, as those calculations were made with the assumption of a 1InN/nGaN SL composition.

36 MATERIALS SCIENCE↗

Enhanced regeneration of degraded polymer solar cells by thermal annealing

The degradation and thermal regeneration of poly(3-hexylethiophene) (P3HT):[6,6]-phenyl-C{sub 61}-butyric acid methyl ester (PCBM) and P3HT:indene-C{sub 60} bisadduct (ICBA) polymer solar cells, with Ca/Al and Ca/Ag cathodes and indium tin oxide/poly(ethylene-dioxythiophene):polystyrene sulfonate anode have been investigated. Degradation occurs via a combination of three primary pathways: (1) cathodic oxidation, (2) active layer phase segregation, and (3) anodic diffusion. Fully degraded devices were subjected to thermal annealing under inert atmosphere. Degraded solar cells possessing Ca/Ag electrodes were observed to regenerate their performance, whereas solar cells having Ca/Al electrodes exhibited no significant regeneration of device characteristics after thermal annealing. Moreover, the solar cells with a P3HT:ICBA active layer exhibited enhanced regeneration compared to P3HT:PCBM active layer devices as a result of reduced changes to the active layer morphology. Devices combining a Ca/Ag cathode and P3HT:ICBA active layer demonstrated ∼50% performance restoration over several degradation/regeneration cycles.

36 MATERIALS SCIENCE↗

Martensitic transformation and phase stability of In-doped Ni-Mn-Sn shape memory alloys from first-principles calculations

The effect of the alloying element Indium (In) on the martensitic transition, magnetic properties, and phase stabilities of Ni{sub 8}Mn{sub 6}Sn{sub 2−x}In{sub x} shape memory alloys has been investigated using the first-principles pseudopotential plane-wave method based on density functional theory. The energy difference between the austenitic and martensitic phases was found to increase with increasing In content, which implies an enhancement of the martensitic phase transition temperature (T{sub M}). Moreover, the formation energy results indicate that In-doping increases the relative stability of Ni{sub 8}Mn{sub 6}Sn{sub 2−x}In{sub x} both in austenite and martensite. This results from a reduction in density of states near the Fermi level regions caused by Ni-3d–In-5p hybridization when Sn is replaced by In. The equilibrium equation of state results show that the alloys Ni{sub 8}Mn{sub 6}Sn{sub 2−x}In{sub x} exhibit an energetically degenerated effect for an In content of x = ∼1.5. This implies the coexistence of antiparallel and parallel configurations in the austenite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvement of the quality of graphene-capped InAs/GaAs quantum dots

In this paper, we study the transfer of graphene onto InAs/GaAs quantum dots (QDs). The graphene is first grown on Cu foils by chemical vapor deposition and then polymer Polymethyl Methacrylate (PMMA) is deposited on the top of graphene/Cu. High quality graphene sheet has been obtained by lowering the dissolving rate of PMMA using vapor processing. Uncapped as well as capped graphene InAs/GaAs QDs have been studied using optical microscopy, scanning electron microscopy, and Raman spectroscopy. We gather from this that the average shifts Δω of QDs Raman peaks are reduced compared to those previously observed in graphene and GaAs capped QDs. The encapsulation by graphene makes the indium atomic concentration intact in the QDs by the reduction of the strain effect of graphene on QDs and the migration of In atoms towards the surface. This gives us a new hetero-structure graphene–InAs/GaAs QDs wherein the graphene plays a key role as a cap layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultralow-power all-optical tunable double plasmon-induced transparencies in nonlinear metamaterials

An all-optical tunable double plasmon-induced transparency is realized in a photonic metamaterial coated on the surface of a nanocomposite layer made of polycrystalline indium-tin oxide doped with gold nanoparticles. The local-field effect, quantum confinement effect, and hot-electron injection ensure a large optical nonlinearity for the nanocomposite. A shift of 120 nm in the central wavelength of transparency windows is reached under excitation with a weak pump laser with an intensity of 21 kW/cm{sup 2}. Compared with previous reports, the threshold pump intensity is reduced by five orders of magnitude, while an ultrafast response time of 34.9 ps is maintained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High blue-near ultraviolet photodiode response of vertically stacked graphene-MoS{sub 2}-metal heterostructures

We present a study on the photodiode response of vertically stacked graphene/MoS{sub 2}/metal heterostructures in which MoS{sub 2} layers are doped with various plasma species. In comparison with undoped heterostructures, such doped ones exhibit significantly improved quantum efficiencies in both photovoltaic and photoconductive modes. This indicates that plasma-doping-induced built-in potentials play an important role in photocurrent generation. As compared to indium-tin-oxide/ MoS{sub 2}/metal structures, the presented graphene/MoS{sub 2}/metal heterostructures exhibit greatly enhanced quantum efficiencies in the blue-near ultraviolet region, which is attributed to the low density of recombination centers at graphene/MoS{sub 2} heterojunctions. This work advances the knowledge for making photo-response devices based on layered materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dramatic enhancement of fullerene anion formation in polymer solar cells by thermal annealing: Direct observation by electron spin resonance

Using electron spin resonance (ESR), we clarified the origin of the efficiency degradation of polymer solar cells containing a lithium-fluoride (LiF) buffer layer created by a thermal annealing process after the deposition of an Al electrode (post-annealing). The device structure was indium-tin-oxide/ poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate)/poly (3-hexylthiophene):phenyl-C{sub 61}-butyric acid methyl ester (P3HT:PCBM)/LiF/Al. Three samples consisting of quartz/P3HT:PCBM/LiF/Al, quartz/P3HT:PCBM/Al, and quartz/PCBM/LiF/Al were investigated and compared. A clear ESR signal from radical anions on the PCBM was observed after LiF/Al was deposited onto a P3HT:PCBM layer because of charge transfer at the interface between the PCBM and the LiF/Al, which indicated the formation of PCBM{sup −}Li{sup +} complexes. The number of radical anions on the PCBM was enhanced remarkably by the post-annealing process; this enhancement was caused by the surface segregation of PCBM and by the dissociation of LiF at the Al interface by the post-annealing process. The formation of a greater number of anions enhanced the electron scattering, decreased the electron-transport properties of the PCBM molecules, and caused an energy-level shift at the interface. These effects led to degradation in the device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InGaN/GaN quantum wells for polariton laser diodes: Role of inhomogeneous broadening

Contrary to the case of III-nitride based visible light-emitting diodes for which the inhomogeneous linewidth broadening characteristic of InGaN-based multiple quantum well (MQW) heterostructures does not appear as a detrimental parameter, such a broadening issue can prevent a microcavity (MC) system entering into the strong light-matter coupling regime (SCR). The impact of excitonic disorder in low indium content (x ∼ 0.1) In{sub x}Ga{sub 1–x}N/GaN MQW active regions is therefore investigated for the subsequent realization of polariton laser diodes by considering both simulations and optical characterizations. It allows deriving the requirements for such MQWs in terms of absorption, emission linewidth, and Stokes shift. Systematic absorption-like and photoluminescence (PL) spectroscopy experiments are performed on single and multiple In{sub 0.1}Ga{sub 0.9}N/GaN quantum wells (QWs). Micro-PL mappings reveal a low temperature PL linewidth of ∼30 meV, compatible with SCR requirements, for single QWs for which the microscopic origin responsible for this broadening is qualitatively discussed. When stacking several InGaN/GaN QWs, a departure from such a narrow linewidth value and an increase in the Stokes shift are observed. Various possible reasons for this degradation such as inhomogeneous built-in field distribution among the QWs are then identified. An alternative solution for the MC design to achieve the SCR with the InGaN alloy is briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced memory effect via quantum confinement in 16 nm InN nanoparticles embedded in ZnO charge trapping layer

In this work, the fabrication of charge trapping memory cells with laser-synthesized indium-nitride nanoparticles (InN-NPs) embedded in ZnO charge trapping layer is demonstrated. Atomic layer deposited Al{sub 2}O{sub 3} layers are used as tunnel and blocking oxides. The gate contacts are sputtered using a shadow mask which eliminates the need for any lithography steps. High frequency C-V{sub gate} measurements show that a memory effect is observed, due to the charging of the InN-NPs. With a low operating voltage of 4 V, the memory shows a noticeable threshold voltage (V{sub t}) shift of 2 V, which indicates that InN-NPs act as charge trapping centers. Without InN-NPs, the observed memory hysteresis is negligible. At higher programming voltages of 10 V, a memory window of 5 V is achieved and the V{sub t} shift direction indicates that electrons tunnel from channel to charge storage layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Confocal filtering in cathodoluminescence microscopy of nanostructures

Cathodoluminescence (CL) microscopy allows optical characterization of nanostructures at high spatial resolution. At the nanoscale, a main challenge of the technique is related to the background CL generated within the sample substrate. Here, we implement confocal detection of the CL signal to minimize the background contribution to the measurement. Nano-phosphors were used as point sources to evaluate the filtering capabilities of our confocal CL system, obtaining an axial intensity profile with 2.7 μm full width at half maximum for the central peak, in good correspondence with theoretical expectations. Considering the electron interaction volume, we found that the confocal filter becomes effective for electron energies above 20 keV, when using a 25 μm pinhole (0.86 Airy units). To illustrate our approach, we present confocal CL imaging of gold nanowires and triangular shaped plates deposited on an indium-tin oxide covered glass substrate, comparing the images with those obtained in standard unfiltered CL detection. The results show that confocal CL microscopy is a valuable tool for the investigation of nanostructures on highly cathodoluminescent substrates, widely used in biological and optical applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Angle-specific transparent conducting electrodes with metallic gratings

Transparent conducting electrodes, which are not made from indium tin oxide, and which display a strong angular dependence are useful for various technologies. Here, we introduce a tilted silver grating that combines a large conductance with a strong and angle-specific transmittance. When the light incidence angle matches the tilt angle of the grating, transmittance is close to the maximum along a very broadband range. We explain the behavior through simulations that show in detail the plasmonic and interference effects at play.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗