Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPORTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Radiochemically-Supported Microbial Communities: A Potential Mechanism for Biocolloid Production of Importance to Actinide Transport

Due to the legacy of Cold War nuclear weapons testing, the Nevada National Security Site (NNSS, formerly known as the Nevada Test Site (NTS)) contains millions of Curies of radioactive contamination. Presented here is a summary of the results of the first comprehensive study of subsurface microbial communities of radioactive and nonradioactive aquifers at this site. To achieve the objectives of this project, cooperative actions between the Desert Research Institute (DRI), the Nevada Field Office of the National Nuclear Security Administration (NNSA), the Underground Test Area Activity (UGTA), and contractors such as Navarro-Interra (NI), were required. Ultimately, fluids from 17 boreholes and two water-filled tunnels were sampled (sometimes on multiple occasions and from multiple depths) from the NNSS, the adjacent Nevada Test and Training Range (NTTR), and a reference hole in the Amargosa Valley near Death Valley. The sites sampled ranged from highly-radioactive nuclear device test cavities to uncontaminated perched and regional aquifers. Specific areas sampled included recharge, intermediate, and discharge zones of a 100,000-km2 internally-draining province, known as the Death Valley Regional Flow System (DVRFS), which encompasses the entirety of the NNSS/NTTR and surrounding areas. Specific geological features sampled included: West Pahute and Ranier Mesas (recharge zone), Yucca and Frenchman Flats (transitional zone), and the Western edge of the Amargosa Valley near Death Valley (discharge zone). The original overarching question underlying the proposal supporting this work was stated as: Can radiochemically-produced substrates support indigenous microbial communities and subsequently stimulate biocolloid formation that can affect radionuclides in NNSS subsurface nuclear test/detonation sites? Radioactive and non-radioactive groundwater samples were thus characterized for physical parameters, aqueous geochemistry, and microbial communities using both DNA- and cultivation-based tools in an effort to understand the drivers of microbial community structure (including radioactivity) and microbial interactions with select radionuclides and other factors across the range of habitats surveyed.

54 ENVIRONMENTAL SCIENCES↗

Radiochemically-supported microbial communities. A potential mechanism for biocolloid production of importance to actinide transport

The work described here revealed the presence of diverse microbial communities located across 19 subsurface sites at the NNSS/NTTR and nearby locations. Overall, the diversity of microorganisms was high for subsurface habitats and variable between sites. As of this writing, preparations are being made to combine the Illumina sequences and 16S rRNA clone libraries with other non-NNSS/NTTR well sites of Southern Nevada Regional Flow System for a publication manuscript describing our very broad landscape scale survey of subsurface microbial diversity. Isolates DRI-13 and DRI-14 remain to be fully characterized and named in accordance with the conventions established by Bergey's Manual of Systematic Bacteriology. In preparation to be published, these microorganisms will be submitted to the American Type Culture Collection (ATCC) and the Deutsche Sammlung von Mikroorganismen und Zellkulturen GmbH (DSMZ).It is anticipated that the data resulting from this study in combination with other data sets that will allow us to produce a number of publications that will be impactful to the subsurface microbiology community.

54 ENVIRONMENTAL SCIENCES↗

Organ and Tissue-specific Sucrose Transporters. Important Hubs in Gene and Metabolite Networks Regulating Carbon Use in Wood-forming Tissues of Populus

The overall project objective was to probe the relationship between sucrose transporters and plant productivity in the biomass for biofuels woody perennial, Populus. At the time the proposal was written, sucrose transporters had already been investigated in many plant model systems, primarily with respect to the export of photosynthate sucrose from source leaves, and the uptake of sucrose in storage organs and seeds. Preliminary findings by the PI found that in Populus, sucrose transporter genes (SUTs) were well expressed in wood-forming tissues that comprise the feedstock for biofuels production. Because sucrose comprises by far the predominant form in which photosynthate is delivered from source organs to sink organs like roots and wood-forming tissues, SUTs control a gate that nominally at least could impact the allocation or partitioning of sucrose for potentially competing end uses like growth (stem biomass) and storage. In addition, water use might be conditioned by the way in which sucrose is distributed throughout the plant, and/or by the way in which sucrose is partitioned intracellularly. Several dozen transgenic lines were produced in year 1 of the project to perturb the expression ratio of multiple plasma membrane (PM) SUTs (intercellular trafficking), versus the single tonoplast membrane (TM) sucrose transporter that effectively regulates intracellular trafficking of sucrose. It was possible to obtain transgenic lines with dual SUT gene knockdown using the 35S promoter, but not the wood-specific TUA1 promoter. By the end of project year 2, a decision was made to work with the 35S plants while archiving the TUA1 plants. The PhD candidate charged with producing the transgenic lines abandoned the project during its second year, substantially contributing to the decision to operate with just the 35S lines. That student’s interests ranged more toward evolutionary topics, and a report on SUT gene evolution was published (Peng et al 2014).

59 BASIC BIOLOGICAL SCIENCES↗

Importance of Microbial Activity On Groundwater Iodate and Organo-Iodine Speciation and Mobility At Two DOE Sites

Iodine (I) occurs in multiple oxidation states in aquatic systems in the form of organic and inorganic species (iodide and iodate). This fact leads to complex biogeochemical cycling of Iodine and its long-lived isotope, 129 I, a major by-product of nuclear fission. Results from our newly developed, sensitive and rapid method for speciated isotopic ratios ( 129 I/ 127 I) via GC-MS, which compare favorably with Accelerator Mass Spectroscopy, demonstrate that the mobility of 129 I species greatly depends on the type of I species and its concentration, pH, and sediment redox state. At ambient concentrations (~10 7 M), I- and IO -3 are significantly retarded by sorption to mineral surfaces and covalent binding to aromatic moieties in natural organic matter (NOM), even when NOM is present at low concentrations such as occur at Hanford. At concentrations traditionally examined in sorption studies (≥ 10 -4 M), I- travels along with the water. Iodate removal can also occur through incorporation into CaCO 3 crystal lattice, e.g., at the Hanford Site. Removal of iodine from the groundwater through interaction with NOM is complicated by the release of mobile organo-I species, as was observed at SRS and Hanford. A small fraction of NOM that is bound to iodine can behave as a mobile organo-I source, a process that we were able to numerically simulate. Field and laboratory studies evaluating the cause for steady increases in 129 I concentrations (up to 1000 pCi L-1) emanating from radiological basins at SRS indicate that an increase of 0.7 pH units in groundwater over 17 years can account for the observed increased groundwater 129 I concentrations. Bacteria from a 129 I-contaminated aerobic aquifer at the F-area of SRS can accumulate I- at environmentally relevant concentrations (10 -7 M), and enzymatically oxidize I-, which together with microbially produced MnO 2 and superoxide or organic acids can significantly contribute to organo-iodine formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimated Bounds and Important Factors for Fuel Use and Consumer Costs of Connected and Automated Vehicles

This report details a study of the potential effects of connected and automated vehicle (CAV) technologies on vehicle miles traveled (VMT), vehicle fuel efficiency, and consumer costs. Related analyses focused on a range of light-duty CAV technologies in conventional powertrain vehicles -- from partial automation to full automation, with and without ridesharing -- compared to today's base-case scenario. Analysis results revealed widely disparate upper- and lower-bound estimates for fuel use and VMT, ranging from a tripling of fuel use to decreasing light-duty fuel use to below 40% of today's level. This wide range reflects uncertainties in the ways that CAV technologies can influence vehicle efficiency and use through changes in vehicle designs, driving habits, and travel behavior. The report further identifies the most significant potential impacting factors, the largest areas of uncertainty, and where further research is particularly needed.

33 ADVANCED PROPULSION SYSTEMS↗

Phenomena Important in Molten Salt Reactor Simulations

The U.S. Nuclear Regulatory Commission (NRC) is preparing for the future licensing of advanced reactors that will be very different from current light water reactors. Part of the NRC preparation strategy is to identify the simulation tools that will be used for confirmatory safety analysis of normal operation and abnormal situations in those reactors. This report advances that strategy for reactors that will use molten salts (MSRs). This includes reactors with the fuel within the salt as well as reactors using solid fuel. Although both types are discussed in this report, the emphasis is on those reactors with liquid fuel because of the perception that solid-fuel MSRs will be significantly easier to simulate. These liquid-fuel reactors include thermal and fast neutron spectrum alternatives. The specific designs discussed in the report are a subset of many designs being considered in the U.S. and elsewhere but they are considered the most likely to submit information to the NRC in the near future. The objective herein, is to understand the design of proposed molten salt reactors, how they will operate under normal or transient/accident conditions, and what will be the corresponding modeling needs of simulation tools that consider neutronics, heat transfer, fluid dynamics, and material composition changes in the molten salt. These tools will enable the NRC to eventually carry out confirmatory analyses that examine the validity and accuracy of applicant’s calculations and help determine the margin of safety in plant design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermochemical and transport properties important to molten salt reactor operation: Off-gas performance and the fission product mechanistic source term

The source term used in reactor performance and safety analysis requires understanding the chemical speciation and transport behavior of fission and activation products in the primary heat transport system (PHTS) and containment. As a starting condition, the transport models will use the isotopic compositions determined through ORIGEN (Bell 1973) calculations and thermochemistry that describes the speciation of the fuel, the salt, activation products and fission products. However, as changes in phase will be under non-equilibrium conditions, the source terms will also need models for the transport behavior of key compounds in the PHTS under various scenarios: normal operation with and without an off-gas system, maintenance, off-normal events, and severe reactor accidents. This document highlights those mechanistic behaviors for which models are needed. Simulations of reactor behavior require these models to be developed for molten salt reactors (MSRs), especially if not part of the suite used in describing LWR behavior. The document concludes with recommendations how to develop these models based on what is already known about reactor safety and fission product behavior.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Iridium an Important Neutron Flux Monitor

Iridium has been used for decades at Los Alamos as a fluence monitor in underground nuclear testing. Iridium can be used to monitor three neutron spectral groups at once, thermal/epithermal, 14 MeV, and fission spectrum (>2 MeV). The nuclear reaction Ir-193(n,n')Ir- 193m has not had a model independent cross section, until recently. The first measurement of the cross section was made last fall at the Berkeley HFNG.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Production of Medically Important Radionuclides 52 Mn and 90 Nb

Over the final reporting period of this project, we at MGH finalized our effort on Project 2: Production and Characterization of 90 Nb which, as per our previous report led us to an interesting application of mass spectrometry in radiometal chemistry. Overall, our research has developed parameters and procedures for delivering high 90 Nb for preclinical and translational applications by initializing the cyclotron targetry and separation chemistry for delivering 90 Nb in a chemical form suitable for subsequent development of 90 Nb-based PET radiotracers, and most recently we have published on the mass spectrometry applications described in the present report. We have been working with MSKCC (PI Jason Lewis) on the 90 Nb methodology and have had input from UAB (PI Suzy Lapi). An in-person meeting was held during the upcoming funding period with 2 PIs who are co-organizing the Radiochemistry Symposium (Lapi and Vasdev) and Program Director Dr. Ethan Balkin, during the ACS National Meeting in March 2018, and 2 PIs (Lewis and Vasdev) co presented in at the World Federation of Nuclear Medicine and Biology at a symposium sponsored by the Australian Nuclear Sciences and Technology Organisation, where they are both collaborating, in Melbourne, Australia in April 2018. Future projects and collaborations are under discussion with the Lapi lab to focus on new applications of 76 Br chemistry, and a new collaboration has already resulted with the Lewis lab on 18 F radiochemistry that employ iodonium ylide based precursors developed in the Vasdev lab, for clinical production of [ 18 F]MFBG. It is noteworthy that the PI has now relocated to the University of Toronto and has 2 cyclotrons (IBA Cyclone and Scanditronix MC-17) that will also be used to explore new 11 C-radiochemistry including [ 11 C]CO.

07 ISOTOPE AND RADIATION SOURCES↗

Quantifying and Accounting for the Importance of Aerosol Mixing State. Final Report

The objective of this project was to develop a comprehensive framework of modeling and theory to rigorously investigate the impacts of aerosol mixing state on climate-relevant aerosol properties. The project led to several breakthroughs in the development of new methods as well as new science results. The significant accomplishments of this project are as follows: 1. We developed a conceptual framework to quantify mixing state based on rigorous information-theoretic entropy concepts, and used this to quantify climate-relevant aerosol impacts. Our new mixing state index has seen significant adoption by experimentalists and modelers. 2. We developed new numerical algorithms to enable the efficient simulation of particle-resolved aerosol microphysics within 3D atmospheric models, and implemented these in our coupled WRF-PartMC model. This makes WRF-PartMC the world’s most accurate model of aerosol microphysics coupled to atmospheric dynamics, and we performed the first ever 3D regional-scale simulations that fully resolve aerosol mixing state. 3. We integrated our modeling and conceptual framework with observations including ASR field campaigns (CARES) and ASR-supported laboratory campaigns (Boston College BC-3).

58 GEOSCIENCES↗

Subsequent R + O 2 Chemistry of Intermediates Formed in Low-Temperature R + O 2 Reactions: Potential Importance in Modeling Autoignition Behavior

Comprehensive chemical kinetics models used in the simulation of hydrocarbon and biofuel oxidation rely on accurate prescription of the underlying reaction mechanisms and rate parameters of associated elementary reactions. For practical transportation fuels, such models contain thousands of elementary reactions, which collectively define chain-initiation, -propagation, -branching, and -inhibition pathways. In the low-temperature regime, below approximately 1000 K where R + O 2 reactions dominate, primary oxidation intermediates including cyclic ethers, carbonyls, and conjugate alkenes are formed in abundance via unimolecular decomposition of either chemically activated or thermalized radicals, specifically organic peroxy (ROO) or hydroperoxyalkyl species (QOOH). Experimental results from multiplexed photoionization mass spectrometry (MPIMS) experiments are detailed herein for several intermediates, derived initially from R + O 2 reactions of hydrocarbons and biofuels, and show that intermediate species formed in the initial steps of oxidation undergo similar reactions to those of the parent molecule, including through QOOH-mediated pathways. Products from QOOH decomposition via chain-inhibition and chain-propagation pathways, namely conjugate alkenes, carbonyls, and cyclic ethers, are detected directly. Despite such rich chemistry involving QOOH radicals, most comprehensive chemical kinetics models neglect the complete description of primary oxidation intermediates, and rather consider a restricted number of reaction pathways. It is suggested that exclusion of the details of the oxidation of these intermediate products may affect the interpretation of combustion simulations using such models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precision γ-ray branching ratio measurements for long-lived fission products of importance to nuclear-security applications (TAMU Annual Report 2020)

Continuing with our effort of precisely measuring the branching ratios for long-lived fission products we have collected and measured two radiopure ¹⁵⁶Eu samples. The samples were collected on thin (40 μg/cm²) carbon-foil backings using a low-energy mass-separated beam of A = 156 fission products from CARIBU at Argonne National Laboratory. During collection, a HPGe detector was used to continuously monitor the implantation rate by detecting the characteristic γ rays emitted following the β decay of the shorter-lived fission products. The first sample had measured activity of 375 Bq while the second one had an activity of 700 Bq. The implanted samples were then shipped to Texas A&M University for measurement of the subsequent decay.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗