Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Generalized Linear Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Emulation of dynamic simulators with application to hydrology

Many simulation-intensive tasks in the applied sciences, such as sensitivity analysis, parameter inference or real time control, are hampered by slow simulators. Emulators provide the opportunity of speeding up simulations at the cost of introducing some inaccuracy. An emulator is a fast approximation to a simulator that interpolates between design input–output pairs of the simulator. Increasing the number of design data sets is a computationally demanding way of improving the accuracy of emulation. We investigate the complementary approach of increasing emulation accuracy by including knowledge about the mechanisms of the simulator into the formulation of the emulator. To approximately reproduce the output of dynamic simulators, we consider emulators that are based on a system of linear, ordinary or partial stochastic differential equations with a noise term formulated as a Gaussian process of the parameters to be emulated. This stochastic model is then conditioned to the design data so that it mimics the behavior of the nonlinear simulator as a function of the parameters. The drift terms of the linear model are designed to provide a simplified description of the simulator as a function of its key parameters so that the required corrections by the conditioned Gaussian process noise are as small as possible. The goal of this paper is to compare the gain in accuracy of these emulators by enlarging the design data set and by varying the degree of simplification of the linear model. We apply this framework to a simulator for the shallow water equations in a channel and compare emulation accuracy for emulators based on different spatial discretization levels of the channel and for a standard non-mechanistic emulator. Our results indicate that we have a large gain in accuracy already when using the simplest mechanistic description by a single linear reservoir to formulate the drift term of the linear model. Adding some more reservoirs does not lead to a significant improvement in accuracy. However, the transition to a spatially continuous linear model leads again to a similarly large gain in accuracy as the transition from the non-mechanistic emulator to that based on one reservoir.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Active operator learning with predictive uncertainty quantification for partial differential equations

With the increased prevalence of neural operators being used to provide rapid solutions to partial differential equations (PDEs), understanding the accuracy of model predictions and the associated error levels is necessary for deploying reliable surrogate models in scientific applications. Existing uncertainty quantification (UQ) frameworks employ ensembles or Bayesian methods, which can incur substantial computational costs during both training and inference. Here, we propose a lightweight predictive UQ method tailored for Deep operator networks (DeepONets) that also generalizes to other operator networks. Numerical experiments on linear and nonlinear PDEs demonstrate that the framework’s uncertainty estimates are unbiased and provide accurate out-of-distribution uncertainty predictions with a sufficiently large training dataset. Our framework provides fast inference and uncertainty estimates that can efficiently drive outer-loop analyses that would be prohibitively expensive with conventional solvers. We demonstrate how predictive uncertainties can be used in the context of Bayesian optimization and active learning problems to yield improvements in accuracy and data-efficiency for outer-loop optimization procedures. In the active learning setup, we extend the framework to Fourier Neural Operators (FNO) and describe a generalized method for other operator networks. To enable real-time deployment, we introduce an inference strategy based on precomputed trunk outputs and a sparse placement matrix, reducing evaluation time by more than a factor of five. Our method provides a practical route to uncertainty-aware operator learning in time-sensitive settings.

97 MATHEMATICS AND COMPUTING↗

Green synthesis and characterization of silver nanoparticle using Aloe barbadensis

Green synthesis of silver nanoparticles was achieved by simple visible light irradiation using aloe barbadensis leaf extract as reducing agent. UV-Vis spectroscopic analysis was used for confirmation of the successful formation of nanoparticles. Investigated the effect of light irradiation time on the light absorption of the nanoparticles. It is observed that upto 25 minutes of light irradiation, the absorption is linearly increasing with time and after that it becomes saturated. Finally, theoretically fitted the time-absorption graph and modeled a relation between them with the help of simulation software.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turnpike solutions of control problems in quantum systems

The model of a quantum system of interacting spins based on the Shrödinger equation with unbounded linear control is transformed to an equivalent derived system (known from the degenerate problems theory). It consists of a regular differential system with new control and description of impulse control modes. This reveals the general turnpike structure of control processes and allows to propose some effective algorithms of their investigation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Attracted to de Sitter: cosmology of the linear Horndeski models

We consider Horndeski cosmological models, with a minisuperspace Lagrangian linear in the field derivative, that are able to screen any vacuum energy and material content leading to a spatially flat de Sitter vacuum fixed by the theory itself. Furthermore, we investigate particular models with a cosmic evolution independent of the material content and use them to understand the general characteristics of this framework. We also consider more realistic models, which we denote the ''term-by-term'' and ''tripod'' models, focusing attention on cases in which the critical point is indeed an attractor solution and the cosmological history is of particular interest.

79 ASTRONOMY AND ASTROPHYSICS↗

Classical string solutions in AdS{sub 5}xS{sup 5}

We discuss some new simple closed bosonic string solutions in AdS{sub 5}xS{sup 5} that may be of interest in the context of AdS/CFT duality. In the first part of this work we consider solutions with two spins (S{sub 1},S{sub 2}) in AdS{sub 5}. Starting from the flat-space solutions and using perturbation theory in the curvature of AdS{sub 5} space, we construct leading terms in the small two-spin solution. We find corrections to the leading Regge term in the classical string energy and uncover a discontinuity in the spectrum for a certain type of solution. We then analyze the connection between small-spin and large-spin limits of string solutions in AdS{sub 5}. We show that the S{sub 1}=S{sub 2} solution in AdS{sub 5} found in earlier papers admits both limits only in the simplest cases of the folded and rigid circular strings. In the second part of the paper, we construct a new class of chiral solutions in R{sub t}xS{sup 5} for which embedding coordinates of S{sup 5} satisfy the linear Laplace equations. They generalize the previously studied rigid string solutions. We study in detail a simple nontrivial example.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stability of the puncture method with a generalized Baumgarte-Shapiro-Shibata-Nakamura formulation

The puncture method for dealing with black holes in the numerical simulation of vacuum spacetimes is remarkably successful when combined with the Baumgarte-Shapiro-Shibata-Nakamura (BSSN) formulation of the Einstein equations. We examine a generalized class of formulations modeled along the lines of the Laguna-Shoemaker system and including BSSN as a special case. The formulation is a two parameter generalization of the choice of variables used in standard BSSN evolutions. Numerical stability of the standard finite difference methods is proven for the formulation in the linear regime around flat space, a special case of which is the numerical stability of BSSN. Numerical evolutions are presented and compared with a standard BSSN implementation. Surprisingly, a significant portion of the parameter space yields (long-term) stable simulations, including the standard BSSN formulation as a special case. Furthermore, nonstandard parameter choices typically result in smoother behavior of the evolution variables close to the puncture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microgrid Service Restoration Incorporating Unmonitored Automatic Voltage Controllers and Net Metered Loads

Islanded microgrids may experience voltage and frequency instability due to uncontrolled state changes of voltage regulation devices and inaccurate demand forecasts. Uncontrolled state changes can occur if optimal microgrid restoration and dispatch algorithms, used for generating control commands for distributed energy resources, do not incorporate the behavior of automatic controllers of voltage regulation devices. Inaccurate demand forecasts may be encountered since post-outage demand of behind-the-meter net metered (NM) loads can vary significantly from their historical NM profiles. Here, this paper proposes an optimization formulation which allows optimal control of voltage regulators and capacitor banks without remote control and communication capabilities. A generalized demand model for NM loads is proposed which incorporates the cold load pickup phenomenon and their time varying post-outage demand in accordance with the IEEE 1547 standard. The time dependent optimal control formulation and the NM demand model are integrated in a sequential microgrid restoration algorithm by linearization of the involved logic propositions. A detailed case study on the unbalanced IEEE 123-node test system in OpenDSS validates the effectiveness of the proposed approach.

30 DIRECT ENERGY CONVERSION↗

A full-spectral Bayesian reconstruction approach based on the material decomposition model applied in dual-energy computed tomography

Purpose: Dual-energy computed tomography (DECT) makes it possible to get two fractions of basis materials without segmentation. One is the soft-tissue equivalent water fraction and the other is the hard-matter equivalent bone fraction. Practical DECT measurements are usually obtained with polychromatic x-ray beams. Existing reconstruction approaches based on linear forward models without counting the beam polychromaticity fail to estimate the correct decomposition fractions and result in beam-hardening artifacts (BHA). The existing BHA correction approaches either need to refer to calibration measurements or suffer from the noise amplification caused by the negative-log preprocessing and the ill-conditioned water and bone separation problem. To overcome these problems, statistical DECT reconstruction approaches based on nonlinear forward models counting the beam polychromaticity show great potential for giving accurate fraction images.Methods: This work proposes a full-spectral Bayesian reconstruction approach which allows the reconstruction of high quality fraction images from ordinary polychromatic measurements. This approach is based on a Gaussian noise model with unknown variance assigned directly to the projections without taking negative-log. Referring to Bayesian inferences, the decomposition fractions and observation variance are estimated by using the joint maximum a posteriori (MAP) estimation method. Subject to an adaptive prior model assigned to the variance, the joint estimation problem is then simplified into a single estimation problem. It transforms the joint MAP estimation problem into a minimization problem with a nonquadratic cost function. To solve it, the use of a monotone conjugate gradient algorithm with suboptimal descent steps is proposed.Results: The performance of the proposed approach is analyzed with both simulated and experimental data. The results show that the proposed Bayesian approach is robust to noise and materials. It is also necessary to have the accurate spectrum information about the source-detector system. When dealing with experimental data, the spectrum can be predicted by a Monte Carlo simulator. For the materials between water and bone, less than 5% separation errors are observed on the estimated decomposition fractions.Conclusions: The proposed approach is a statistical reconstruction approach based on a nonlinear forward model counting the full beam polychromaticity and applied directly to the projections without taking negative-log. Compared to the approaches based on linear forward models and the BHA correction approaches, it has advantages in noise robustness and reconstruction accuracy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Designing linear lattices for round beam in electron storage rings using the solution by linear matrices analysis

For some synchrotron light source beamline applications, a round beam is preferable to a flat one. A conventional method of obtaining round beam in an electron storage ring is to shift its tune close to a linear difference resonance. The linearly coupled beam dynamics is analyzed with perturbation theories, which have certain limitations. In this paper, we adopt the Solution by LInear Matrices (SLIM) analysis to calculate exact beam sizes to design round beam lattices. The SLIM analysis can deal with a generally linearly coupled accelerator lattice. The effects of various coupling sources on beam emittances and sizes can be studied within a self-consistent frame. Both the on- and off-resonance schemes to obtain round beams are explained with examples. The SLIM formalism for two widely used magnet models: combined-function bending magnets, and planar wigglers and undulators, is also derived.

43 PARTICLE ACCELERATORS↗

Future accelerator projects: new physics at the energy frontier

High-energy colliders provide direct access to the energy frontier, allowing to search for new physics at scales as high as the machine’s center-of-mass energy, perform precision measurements of the Standard Model (SM) parameters, including those related to the flavor sector, and determine the Higgs boson properties and their connection to electroweak symmetry breaking. Each proposed future collider option has its own specific science goals and capabilities, depending on the designed running energy (energies) amongst other parameters. In this paper, an overview of the discovery potential of future circular and linear colliders is presented. Results from searches for beyond the Standard Model (BSM) phenomena at proton–proton, proton–electron, electron–positron, and muon–antimuon colliders are summarized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Aircraft model prototypes which have specified handling-quality time histories

Several techniques for obtaining linear constant-coefficient airplane models from specified handling-quality time histories are discussed. The pseudodata method solves the basic problem, yields specified eigenvalues, and accommodates state-variable transfer-function zero suppression. The algebraic equations to be solved are bilinear, at worst. The disadvantages are reduced generality and no assurance that the resulting model will be airplane like in detail. The method is fully illustrated for a fourth-order stability-axis small motion model with three lateral handling quality time histories specified. The FORTRAN program which obtains and verifies the model is included and fully documented.

Johnson, S. H.↗

Wind-tunnel investigation of the aerodynamic characteristics of the Standard Dynamics Model in coning motion at Mach 0.6

A series of wind-tunnel tests have been conducted on the Standard Dynamics Model (a simplified generic fighter-aircraft shape) undergoing coning motion at Mach 0.6. Six-component force and moment data are presented for a range of angles of attack, sideslip and coning rates. At the relatively low nondimensional coning rates employed, the lateral aerodynamic charactersitics generally show a linear variation with coning rate.

Jermey, C.↗

A preliminary evaluation of the generalized likelihood ratio for detecting and identifying control element failures in a transport aircraft

The application of the Generalized Likelihood Ratio technique to the detection and identification of aircraft control element failures has been evaluated in a linear digital simulation of the longitudinal dynamics of a B-737 aircraft. Simulation results show that the technique has potential but that the effects of wind turbulence and Kalman filter model errors are problems which must be overcome.

Bundick, W. T.↗

A novel approach to the modelling and control of flexible robot arms

A general dynamic model of a two-link Euler-Bernoulli beam flexible robot arm is presented in the form of partial-differential-integral equations. Observations are made on important properties of the dynamic model. The resulting infinite-dimensional system is then input-output decoupled and partially linearized by a diffeomorphic state transformation and nonlinear state feedback. The local stability issue is addressed for a one-link flexible robot arm.

Ding, Xuru↗

Feasibility investigation of general time-domain unsteady aerodynamics of rotors

The feasibility of a general theory for the time-domain unsteady aerodynamics of helicopter rotors is investigated. The wake theory gives a linearized relation between the downwash and the wing bound circulation, in terms of the impulse response obtained directly in the time domain. This approach makes it possible to treat general wake configurations, including discrete wake vorticity with rolled-up and distorted geometry. The investigation establishes the approach for model order reduction; determines when a constrained identification method is needed; verifies the formulation of the theory for rolled-up, distorted trim wake geometry; and verifies the formulation of the theory for wake geometry perturbations. The basic soundness of the approach is demonstrated by the results presented. A research program to complete the development of the method is outlined. The result of this activity will be an approach for analyzing the aeroelastic stability and response of helicopter rotors, while retaining the important influence of the complicated rotor wake configuration.

Johnson, Wayne↗

Attitude Determination Error Analysis System (ADEAS) mathematical specifications document

The mathematical specifications of Release 4.0 of the Attitude Determination Error Analysis System (ADEAS), which provides a general-purpose linear error analysis capability for various spacecraft attitude geometries and determination processes, are presented. The analytical basis of the system is presented. The analytical basis of the system is presented, and detailed equations are provided for both three-axis-stabilized and spin-stabilized attitude sensor models.

Nicholson, Mark↗

Dynamically stratified Monte Carlo forecasting

A new method for performing Monte Carlo forecasts is introduced. The method, called dynamic stratification, selects initial perturbations based on a stratification of the error distribution. A simple implementation is presented in which the error distribution used for the stratification is estimated from a linear model derived from a large ensemble of 12-h forecasts with the full dynamic model. The stratification thus obtained is used to choose a small subsample of initial states with which to perform the dynamical Monte Carlo forecasts. Several test cases are studied using a simple two-level general circulation model with uncertain initial conditions. It is found that the method provides substantial reductions in the sampling error of the forecast mean and variance when compared to the more traditional approach of choosing the initial perturbations at random. The degree of improvement, however, is sensitive to the nature of the initial error distribution and to the base state. In practice the method may be viable only if the computational burden involved in obtaining an adequate estimate of the error distribution is shared with the data-assimilation procedure.

Schubert, Siegfried↗