Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fluorescence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Dendrigraft polymer-based synthesis of silver nanoparticles showing bright blue fluorescence

A novel method is reported here for the synthesis of optically clear and stable colloidal solutions of silver nanoparticles. According to size they show different colours depending upon their plasmonic absorption frequencies. The materials have been synthesized at room temperature by chemical reduction of silver ions (silver nitrate) coordinated with dendrigraft polymer, polyethyleneimine (PEI) using formaldehyde in aqueous medium. UV-vis absorption and transmission electron microscopy (TEM) studies show single-band absorption with peak maximum at 354 nm for {approx}3 nm sized particles, whereas a side band at {approx}400 nm was observed when the particle size increased to {approx}20 nm. Highly narrow particle size distribution was observed in case of samples having {approx}3 nm size silver particles and also the process of reduction could be completed within minutes. More interestingly, the 3-nm sized particles showed strong blue (474 nm) fluorescence under UV excitation. Thin films of all synthesized samples were prepared on silica substrate by fine spray coating technique.

36 MATERIALS SCIENCE↗

Effect of laser pulse parameters on the size and fluorescence of nanodiamonds formed upon pulsed-laser irradiation

The size of nanodiamonds formed upon laser irradiation could be easily controlled over simply adjusting laser pulse parameters. The stable size and structure of nanodiamonds were mostly determined by laser power density and pulse width. Both large nanodiamonds with multiply twinning structure (MTS) and small nanodiamonds with single crystalline structure (SCS) emitted strong visible light after surface passivation, and their fluorescence quantum yield (QY) was 4.6% and 7.1%, respectively.

36 MATERIALS SCIENCE↗

Gamma ray assisted fabrication of fluorescent oligographene nanoribbons

Graphical abstract: Facile low cost method for production of oligographene nanoribbons is presented. Highlights: ► Gamma ray assisted fabrication of oligographene nanoribbons. ► Facile, large scale and low cost method of graphene nanoribbon fabrication. ► Produced nanoribbons are fluorescent in the blue region of visible spectrum. -- Abstract: In this paper, facile low cost method for production of oligographene nanoribbons is presented. Nanoribbons are produced by gamma ray assisted cutting of oligographene dispersed in cyclopentanone. Width and height of the smallest nanoribbons are 30 and 1 nm, respectively. Due to the presence of a small number of defects introduced by gamma irradiation, nanoribbons are photoluminescent in the UV and blue region of the visible spectrum.

36 MATERIALS SCIENCE↗

Remarkable modulation effects of Ag{sup +} ion on fluorescence of Eu{sup 3+} ion doped yttrium phosphate nanophosphors

Highlights: ► Ag{sup +} sensitized YPO{sub 4}:Eu{sup 3+} was synthesized. ► Emission band centered at 612 nm was broadened to 14 nm. ► Ag{sup +} plays a main role for the broadening of emission band of Eu{sup 3+}. ► Emission mechanisms were discussed. - Abstract: Ag{sup +} sensitized YPO{sub 4}:Eu{sup 3+} nanomaterials were successfully synthesized by hydrothermal reaction. The fluorescent spectra indicate that Ag{sup +} ion has remarkable modulation effects on the shape of the emission bands of YPO{sub 4}:Eu{sup 3+}, so that full width at half maximum (FWHM) of the {sup 5}D{sub 0} → {sup 7}F{sub 2} emission of YPO{sub 4}:Eu{sup 3+} is extended to be 14 nm, broader than that (<9 nm) of ever reported Eu{sup 3+}-doped materials. Meanwhile, it is observed that the doping of Ag+ ion leads to the lowering of the intensity ratio of {sup 5}D{sub 0} → {sup 7}F{sub 2} to {sup 5}D{sub 0} → {sup 7}F{sub 1} transition. The analysis demonstrates that doping of Ag{sup +} ion will generate the local lattice aberration and the crystal field variation of Eu{sup 3+} ion and Y{sup 3+} ions due to a fact that the ionic radius (1.31 Å) of Ag{sup +} is obviously larger than that (0.938 Å) of Eu{sup 3+} and that (0.90 Å) of Y{sup 3+}. As a result, the excitation and emission bands of Eu{sup 3+} ion are correspondingly tuned.

36 MATERIALS SCIENCE↗

Fluorescence properties and relaxation processes of Tb{sup 3+} ions in ZnCl{sub 2}-based glasses

Graphical abstract: - Highlights: • In 60ZnCl{sub 2}–20KCl–20BaCl{sub 2}–xTbCl{sub 3} glasses, no energy transfer occurred for 0 < x ≤ 0.34. • For 0.34 < x ≤ 1.25, the cross relaxation, ({sup 5}D{sub 3} → {sup 5}D{sub 4}) → ({sup 7}F{sub 0} ← {sup 7}F{sub 6}) occurred between Tb{sup 3+} ions. • For 0 < x ≤ 0.34, the 72% of excited electrons were radiatively relaxed by the {sup 5}D{sub 3} → {sup 7}F{sub J} transitions. • The lifetime of the {sup 5}D{sub 3} initial level was long and 1.1 ms. - Abstract: 60ZnCl{sub 2}–20KCl–20BaCl{sub 2}–xTbCl{sub 3} glasses (x = 0.10, 0.25, 0.50, 0.75, 1.00, and 1.25) were prepared by melt-quenching method, and Tb{sup 3+} fluorescence properties were investigated under 355 nm excitation. Regardless of x values, the electrons that were relaxed from the {sup 5}D{sub 3} to {sup 5}D{sub 4} level of Tb{sup 3+} ions by the multiphonon relaxation, were repressed to 28% of all the excited electrons because the ZnCl{sub 2}-based glass had much lower phonon energy than oxide glasses. For 0 < x ≤ 0.34, the cross relaxation, ({sup 5}D{sub 3} → {sup 5}D{sub 4}) → ({sup 7}F{sub 0} ← {sup 7}F{sub 6}), was repressed, and consequently 72% and 28% of all the excited electrons were radiatively relaxed by the {sup 5}D{sub 3} → {sup 7}F{sub J} (J = 6, 5, 4, 3, and 2) and {sup 5}D{sub 4} → {sup 7}F{sub J} (J = 6, 5, 4, and 3) transitions, respectively. The lifetimes of the {sup 5}D{sub 3} and {sup 5}D{sub 4} initial levels were obtained to be 1.1 and 2.1 ms, respectively.

36 MATERIALS SCIENCE↗

∼2 μm fluorescence radiative dynamics and energy transfer between Er{sup 3+} and Tm{sup 3+} ions in silicate glass

Graphical abstract: - Highlights: • A Er{sup 3+}/Tm{sup 3+} co-doped silicate glass with good thermal stability (k{sub gl} = 0.402 for STE glass) is prepared. • Efficient ∼2 μm emission is observed under 808 nm and 980 nm laser excitation. • The glass structure and spectroscopic properties are confirmed by optical absorption, IR transmission, Raman and fluorescence studies. • The content of OH groups deceases efficiently after fluorine ions are introduced. • The energy transfer coefficient from Er{sup 3+} to Tm{sup 3+} in STFE glass is 13.39 × 10{sup −40} cm{sup 6}/s. - Abstract: A Er{sup 3+}/Tm{sup 3+} co-doped silicate glass with good thermal stability is prepared by melt-quenching method. An efficient emission of ∼2 μm is observed under different selective laser excitations. The optical absorption and transmission spectra, Raman spectra, and emission spectra are tested to characterize ∼2 μm emission properties of Er{sup 3+}/Tm{sup 3+} co-doped silicate glasses and a reasonable energy transfer mechanism of ∼2 μm emission between Er{sup 3+} and Tm{sup 3+} ions is proposed. Based on the optical absorption spectra, the Judd–Ofelt parameters and radiative properties were calculated. Intense ∼2 μm emission is obtained from Er{sup 3+}/Tm{sup 3+} co-doped silicate glasses due to the efficient energy transfer from Er{sup 3+} to Tm{sup 3+} ions. The energy transfer coefficient from Er{sup 3+} to Tm{sup 3+} ions can reach as high as 13.39 × 10{sup −40} cm{sup 6}/s. In addition, the population of the OH groups is decreased and the ∼2 μm emission is effectively enhanced with fluoride introduction. The emission property, together with good thermal property, indicates that Er{sup 3+}/Tm{sup 3+} co-doped silicate glass is a potential kind of laser glass for efficient ∼2 μm laser.

36 MATERIALS SCIENCE↗

2.7 μm fluorescence and energy transfer in Er{sup 3+} doped germanosilicate glasses

Highlights: • Novel Er{sup 3+} doped germanosilicate glasses were synthesized. • Excellent thermal stability and 2.7 μm emission properties were obtained. • High A{sub rad} (33.75 s{sup −1}) and emission cross section (1.90 × 10{sup −20} cm{sup 2}) were achieved. • A reasonable energy transfer mechanism was put forward. - Abstract: 2.7 μm fluorescence has been achieved for the first time in Er{sup 3+} doped novel germanosilicate glasses. Thermal stability, spectroscopic properties and energy transfer mechanism have been investigated in detail. Moreover, the spontaneous transition probability (A{sub rad}) and emission cross section of samples were calculated and analyzed. The prepared Er{sup 3+} doped germanosilicate glasses possessing excellent thermal stability, high A{sub rad} (33.75 s{sup −1}) and emission cross section of 2.7 μm (1.90 × 10{sup −20} cm{sup 2}) provide a new material for the realization of mid-infrared fiber lasers.

36 MATERIALS SCIENCE↗

Simultaneously optimizing fluorescent and paramagnetic properties of bifunctional NaGdF{sub 4}:Yb{sup 3+}/Er{sup 3+} nanocrystals by crystal field tuning

Graphical abstract: Crystal field tuning is a powerful approach for simultaneously enhancing the optical and magnetic properties of lanthanide-doped NaGdF{sub 4} bi-functional nanocrystals. - Abstract: Here, we show the simultaneous enhancement of fluorescent and paramagnetic properties in bifunctional NaGdF{sub 4}:Yb{sup 3+}/Er{sup 3+} nanocrystals by crystal field tuning. The energy level splitting calculation indicates, that lanthanide ionic pairs La{sup 3+}/Lu{sup 3+} introduced into the NaGdF{sub 4} host can modify the crystal field around emitters (e.g., Er{sup 3+} and Tm{sup 3+}) and sensitizers (e.g., Yb{sup 3+}) that result in the broadening of crystal field splitting of energy levels and the abundant multi-site distribution of upconversion luminescence. The optimization of the paramagnetic properties in NaGdF{sub 4} doped with emitters and sensitizers is ascribed to the lowering of anti-ferromagnetic coupling.

36 MATERIALS SCIENCE↗

mRNA-targeted Fluorescent in Situ Hybridization (FISH) of Gram-negative Bacteria Without Template Amplification or Tyramide Signal Amplification

Technologies are needed to study gene expression at the level of individual cells within a population or microbial community. Fluorescent in situ hybridization (FISH) supplies high-resolution spatial information and has been widely applied to study microbial communities at the rRNA level. While mRNA-targeted FISH has been popular for studying gene expression in eukaryotic cells, very little success has been achieved with prokaryotes. At present, detection of specific mRNAs in individual prokaryotic cells requires the use of in situ-RT-PCR or tyramide signal amplification (TSA). In this study we used DNA oligonucleotide probes labeled with a single near-infrared dye in FISH assays to detect multicopy plasmid-based and endogenous mRNA molecules in Escherichia coli and Shewanella oneidensis MR-1. We took advantage of the fact there is much less background signal produced by biological materials and support matrices in the near-infrared spectrum and thus long camera exposure times could be used. In addition, we demonstrate that a combination of probes targeting both rRNA and mRNA could be successfully employed within the same FISH assay. These results, as well as ongoing R&D improvements in NIR and infrared dyes, indicate the FISH approach we demonstrated could be applied in certain environmental settings to monitor gene expression in mixed populations.

59 BASIC BIOLOGICAL SCIENCES↗

X-Ray Fluorescence to Determine Zn in Bolivian Children using Hair Samples

As a first step in the evaluation of nutritional levels in Bolivian children (8–13 years-old), we carried out X-Ray Fluorescence measurements in hair samples of children belonging to different social classes and living either in rural areas or in cities. The aim of this study is to contribute to health policies tending to improve the global health of children and consequently avoid malnutrition. Our method intends to have maximum reliability and at the same time be as simple as possible from an experimental point of view. Additionally, we use this method to determine some other elements such as Fe, Cu, Pb, As and Hg, the latter three considered as contaminants that could be present in children living in areas which neighbor mines and industries. This work will be complemented by some biological and medical tests.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pigmented Creatine Deposits in Amyotrophic Lateral Sclerosis Central Nervous System Tissues Identified by Synchrotron Fourier Transform Infrared Microspectroscopy and X-ray Fluorescence Spectromicroscopy

Amyotrophic Lateral Sclerosis (ALS) is an untreatable, neurodegenerative disease of motor neurons characterized by progressive muscle atrophy, limb paralysis, dysarthria, dysphagia, dyspnae and finally death. Large motor neurons in ventral horns of spinal cord and motor nuclei in brainstem, large pyramidal neurons of motor cortex and/or large myelinated axons of corticospinal tracts are affected. In recent synchrotron Fourier Transform Infrared microspectroscopy (sFTIR) studies of ALS CNS autopsy tissue, we discovered a small deposit of crystalline creatine, which has a crucial role in energy metabolism. We have now examined unfixed, snap frozen, post-autopsy tissue sections of motor cortex, brain stem, spinal cord, hippocampus and substantia nigra from six ALS and three non-degenerated cases with FTIR and micro-X-ray fluorescence (XRF). Heterogeneous pigmented deposits were discovered in spinal cord, brain stem and motor neuron cortex of two ALS cases. The FTIR signature of creatine has been identified in these deposits and in numerous large, non-pigmented deposits in four of the ALS cases. Comparable pigmentation and creatine deposits were not found in controls or in ALS hippocampus and substantia nigra. Ca, K, Fe, Cu and Zn, as determined by XRF, were not correlated with the pigmented deposits; however, there was a higher incidence of hot spots (Ca, Zn, Fe and Cu) in the ALS cases. The identity of the pigmented deposits remains unknown, although the absence of Fe argues against both erythrocytes and neuromelanin. We conclude that elevated creatine deposits may be indicators of dysfunctional oxidative processes in some ALS cases.

60 APPLIED LIFE SCIENCES↗

EUSO-SPB2 Fluorescence Telescope trigger test within the EUSO@TurLab Project

The second generation Extreme Universe Space Observatory on a Super-Pressure Balloon (EUSO-SPB2) mission is on track to be approved by NASA for a long duration flight (up to 100 days) in 2023 from Wanaka, New Zealand. EUSO-SPB2 will monitor the night atmosphere of the Southern hemisphere from 33 km altitude to detect Ultra-High Energy Cosmic Rays (UHECRs) and search for astrophysical and cosmogenic neutrinos. EUSO-SPB2 features two telescopes, a Cherenkov (CT) and a Fluorescence (FT) Telescope. The hardware implementation and performance of the FT trigger logic were tested at the TurLab facility, hosted at the University of Turin. In conclusion, the tests proved the correct hardware implementation of the trigger logic and its ability to detect μs timescale transient signals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High-accuracy Geant4 simulation and semi-analytical modeling of nuclear resonance fluorescence

Nuclear resonance fluorescence (NRF) is a photonuclear interaction that enables highly isotope-specific measurements in both pure and applied physics scenarios. High-accuracy design and analysis of NRF measurements in complex geometries is aided by Monte Carlo simulations of photon physics and transport, motivating Jordan and Warren (2007) to develop the G4NRF codebase for NRF simulation in Geant4. In this work, we enhance the physics accuracy of the G4NRF code and perform improved benchmarking simulations. The NRF cross section calculation in G4NRF, previously a Gaussian approximation, has been replaced with a full numerical integration for improved accuracy in thick-target scenarios. A high-accuracy semi-analytical model of expected NRF count rates in a typical NRF measurement is then constructed and compared against G4NRF simulations for both simple homogeneous and more complex heterogeneous geometries. Furthermore, agreement between rates predicted by the semi-analytical model and G4NRF simulation is found at a level of ~1% in simple test cases and ~3% in more realistic scenarios, improving upon the ~20% level of the initial benchmarking study and establishing a highly-accurate NRF framework for Geant4.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An X-Ray Fluorescence Study on the Segregation of Cs and I in and Inverted Organic Solar Cell

X-ray near-total-reflection fluorescence reveals that in multilayers of the inverted organic solar cell (ITO/CsI/P3HT:PCBM-based) Cs diffuses into the organic layer and iodide diffuses into the ITO. Laser ablation inductively coupled plasma mass spectrometry measurements, which integrate elemental concentration across the whole multilayer structure, indicate that the Cs:I ratio remains 1:1 confirming there is no loss of iodine from the sample. Iodide diffusion to the bulk ITO layer is also found in a similarly prepared ITO/NaI/P3HT:PCBM multilayer structure. Our results are consistent with recent XPS measurements which show that the Cs:I ratio at the ITO/CsI surface exceeds 8:1, and rationalize this observation.

36 MATERIALS SCIENCE↗

Diagnostic Implications of the Reactivity of Fluorescence Tracers

Measurements of fuel concentration distributions with planar laser induced fluorescence of tracer molecules that are added to a base fuel are commonly used in combustion research and development. It usually is assumed that the tracer concentration follows the parent fuel concentration if physical properties such as those determining evaporation are matched. As an example to address this general issue a computational study of combustion of biacetyl/iso-octane mixtures was performed to investigate how well the concentration of biacetyl represents the concentration of iso-octane. For premixed mixture conditions with flame propagation the spatial concentration profiles of the two species in the flame front are separated by 110 {micro}m at 1 bar and by 11 {micro}m at 10 bar. For practical applications this spatial separation is insignificantly small. However, for conditions that mimic ignition and combustion in diesel and HCCI-like operation the differences in tracer and fuel concentration can be significant, exceeding hundreds of percent. At low initial temperature biacetyl was found to be more stable whereas at higher temperature (>1000K) iso-octane is more stable. Similar findings were obtained for a multi-component fuel comprised of iso-octane, n-heptane, methylcyclohexane, and toluene. It may be assumed that similar differences can exist for other tracer/fuel combinations. Caution has therefore to be applied when interpreting PLIF measurements in homogeneous reaction conditions such as in HCCI engine studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flame stabilization in DME spray flames under engine-relevant conditions characterized by OH* chemiluminescence and formaldehyde laser-induced fluorescence

The transient and quasi-steady flame structures of Dimethyl Ether (DME) fuel sprays, produced by a single-hole injector (Spray D), were investigated using Planar Laser-Induced Fluorescence (PLIF) and chemiluminescence imaging in a constant-volume chamber under Engine Combustion Network (ECN) Spray A conditions (900 K ambient temperature, 60 bar ambient pressure, 1500 bar injection pressure, and 22.8 kg/m 3 ambient density). Low-temperature chemical reaction zones were visualized using formaldehyde (CH 2 O) PLIF with 355 nm excitation, while high-temperature flame regions were captured via chemiluminescence imaging of excited-state hydroxyl radicals (OH*). Both transient and quasi-steady flame structures clearly show the transition from CH 2 O to OH*, highlighting the progression from low- to high-temperature combustion, while the position of the flame is displaced for DME compared to reference hydrocarbon n-dodecane. Homogeneous reactor calculations with detailed chemistry and using adiabatic mixing for initial temperature show that CH 2 O peaks are significantly higher for DME at the same equivalence ratio, with a higher heat-release during the cool-flame regime with respect to the fuel heating value. Thus, the cool-flame dynamic as a precursor to high-temperature combustion and flame stabilization exhibit distinct behavior for DME relative to conventional hydrocarbons, and these phenomena are effectively resolved through the soot-free nature of DME and the high-speed, time-resolved diagnostics.

CH2O laser-induced fluorescence↗

TROPOMI observations allow for robust exploration of the relationship between solar-induced chlorophyll fluorescence and terrestrial gross primary production

Solar-induced chlorophyll fluorescence (SIF) observed by satellites has advanced the monitoring of terrestrial photosynthesis regionally and globally. The relationship between SIF and gross primary production (GPP) at leaf, canopy, and ecosystem scales has received tremendous attention in recent years. It remains controversial whether the SIF-GPP relationship at the ecosystem scale is universal or dependent upon vegetation type. New SIF observations from the TROPOspheric Monitoring Instrument (TROPOMI) with unprecedented high spatial and temporal resolution provide a new opportunity to elucidate the SIF-GPP relationship. Here, we examine the SIF-GPP relationship for seven major vegetation types across the U.S. with TROPOMI SIF and in-situ GPP data for 83 eddy covariance flux sites. We find that TROPOMI SIF shows a strong and consistent relationship with tower-based GPP at both satellite footprint and grid-cell levels. The slope of the SIF-GPP relationship is similar among all the vegetation types except croplands, demonstrating a nearly universal (converging to ~13.5 g C m -2 d -1 /W m -2 μm -1 sr -1) rather than vegetation type-specific SIF-GPP relationship. This confirms that TROPOMI SIF can be used as a proxy for GPP across a wide variety of vegetation types and can also be used to quantify GPP by avoiding uncertainty associated with land cover maps. The C 4 crops have a much higher slope than the C 3 crops, and therefore croplands tend to have a higher slope than C 3 -dominated vegetation types (e.g., forests, shrublands, savannas). We also find that the TROPOMI SIF is well correlated with GPP under normal or wetter conditions, while their relationship becomes weaker under water stress. In conclusion, our TROPOMI-based study could improve our understanding of the SIF-GPP relationship at the ecosystem scale and advance the mapping of GPP globally with SIF observations from space.

54 ENVIRONMENTAL SCIENCES↗

Satellite solar-induced chlorophyll fluorescence and near-infrared reflectance capture complementary aspects of dryland vegetation productivity dynamics

Mounting evidence indicates dryland ecosystems play an important role in driving the interannual variability and trend of the terrestrial carbon sink. Nevertheless, our understanding of the seasonal dynamics of dryland ecosystem carbon uptake through photosynthesis [gross primary productivity (GPP)] remains relatively limited due in part to the limited availability of long-term data and unique challenges associated with satellite remote sensing across dryland ecosystems. Here, we comprehensively evaluated longstanding and emerging satellite vegetation proxies in their ability to capture seasonal dryland GPP dynamics. Specifically, we evaluated: 1) reflectance-based proxies normalized difference vegetation index (NDVI), soil adjusted vegetation index (SAVI), near infrared reflectance index (NIR v ), and kernel NDVI (kNDVI) from the MODerate resolution Imaging Spectroradiometer (MODIS); and 2) newly available physiologically-based proxy solar-induced chlorophyll fluorescence (SIF) from the TROPOspheric Monitoring Instrument (TROPOMI). As a performance benchmark, we used GPP estimates from a robust network of 21 western United States eddy covariance tower sites that span representative gradients in dryland ecosystem climate and functional composition. We found that NIR v and SIF were the best performing GPP proxies and captured complementary aspects of seasonal GPP dynamics across dryland ecosystem types. NIR v offered better performance than the other proxies across relatively low-productivity, sparsely non-evergreen vegetated sites (R 2 = 0.59 ± 0.13); whereas SIF best captured seasonal dynamics across relatively high-productivity sites, including evergreen-dominated sites (R 2 = 0.74 ± 0.07). Notably, across grass-dominated sites, all reflectance-based proxies (NDVI, SAVI, NIRv and kNDVI) showed significant seasonal bias (hysteresis) that strengthened with the total fraction of woody vegetation cover, likely due to seasonal patterns in woody vegetation reflectance that are unrelated to or decoupled from GPP. In conclusion, future efforts to fully integrate the complementary strengths of NIR v and SIF could significantly improve our understanding and representation of dryland GPP dynamics in satellite-based models.

54 ENVIRONMENTAL SCIENCES↗