Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLORIDA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Production of Biocrude in an Advanced Photobioreactor-Based Biorefinery

Algenol Biotech, the National Renewable Energy Laboratory (NREL), Georgia Institute of Technology, Arizona State University, and Reliance Industries formed a team to advance the state of the art in algal biomass production and downstream processing technologies, with the end goal of a sustainable, economically viable biofuel intermediate (BFI, biocrude) product. The project included examination of high value co-product production as a market entry strategy and for enhancing the economics of a biorefinery for BFI production. The project targeted innovations in biology, operations, and engineering. The goals of the project were: BFI productivity greater than 4,000 gal-BFI/acre-yr on an annualized basis; energy efficient innovations in downstream operations resulting in an energy expenditure less than 10% of the BFI energy content and a carbon footprint reduction of more than 60% compared to fossil alternatives; and a comprehensive Techno-Economic Analysis (TEA) that identifies limiting factors for commercial viability of a photobioreactor (PBR)-based biofuel product. The project achieved the overall objectives. Strain development efforts led to the identification of a strain (Cyanobacterium sp. AB1166) that, relative to the previous best strain (Cyanobacterium sp. AB1), exhibited a ~10% increase in productivity under commercially-relevant cultivation conditions and also resulted in cultures with a >50% reduction in viscosity such that harvesting efficiency was improved; these results represent achievement of key project milestones. Progress was also made at NREL in altering the biochemical composition of algal biomass to improve the yield of BFI produced via HTL. These strain enhancements coupled with improved outdoor cultivation practices, including semi-continuous operation, increased areal biomass productivity by nearly 80% over the established baseline productivity. The annualized productivity achieved (26.8 g/m2-d), paired with HTL conversion yields realized at NREL and RIL (38% ± 2% BFI), translates to 4,100 gal-BFI/acre-yr, exceeding the FY20 BETO goal of 3,700 gal-BFI/acre-yr. Significant progress was also demonstrated in large scale PBR-based production system design, operability, and cost reduction. A 24,000-L production module comprised of 240 interlinked PBRs was constructed and successfully operated outdoors for over one year in Fort Myers, Florida. Aided by a state-of-the-art productivity model, the productivities achieved convincingly demonstrated scalability of laboratory results determined at the mL to L scale to large-scale outdoor operations exceeding 20,000 L. The system was used to cultivate Arthrospira platensis (Spirulina), an industrially-relevant cyanobacterium and source for phycocyanin, an approved blue food colorant that Algenol is developing as a risk reduction strategy for future biofuel projects and as a potential business opportunity. A key project milestone to develop phycocyanin extraction and purification technologies was achieved ahead of schedule, and product samples received positive feedback from potential customers. The production and downstream operations data generated in this project were used to conduct and refine Techno-Economic and Life Cycle Assessments to provide research guidance for reducing the costs and environmental footprint of algal biofuel and co-product manufacturing plants. Several CO 2 supply scenarios for an algal biorefinery were identified as being capable of providing a large (>60%) reduction in carbon footprint in comparison to gasoline. The TEA assessments incorporated detailed comparisons of PBR versus open pond production systems, yielding a 3-fold higher areal productivity for PBRs and suggesting overall production cost parity for the two systems. The progress in this ABY2 project addressed many of the the barriers identified for the Advanced Algal Systems R&D Program and are directly relevant to achieving the established BETO goals associated with large scale biofuel production and cost reduction.

09 BIOMASS FUELS↗

Research Needs for Uranium-Zirconium- Based Metallic Fuels

The purpose of this report is to summarize the needs and present recommendations related to the future direction for U-Zr-based metallic fuel research (including binary U-Zr and ternary U-Pu-Zr alloys). These needs and recommendations were determined by subject matter experts from various institutions during a two-day workshop held at the University of Florida in November, 2019. During open-floor discussions, the highest priority gaps in our understanding of U-Zr-based fuels were down-selected, and near- and long-term needs that directly impact the implementation of these metallic fuels were identified. The identified near-term needs include investigation of the following phenomena: i) swelling and fission gas release, ii) fuel-cladding chemical interaction, iii) phase evolution/constituent redistribution, and iv) thermal properties of the fuels. The long-term needs are: i) investigation of fuel creep and plasticity and ii) fission product (lanthanide) transport. In addition, there was general agreement that all institutions and subject matter experts would benefit from an open-source metallic fuels database with thermophysical property and microstructural data, along with fuel operation/irradiation history, which should be regularly updated with vetted information from new experimental and computational investigations and used to advance metallic fuels research and development. Finally, we recommend that metallic fuel research should be ongoing and that fuel qualification and fuel optimization should be equally prioritized; research combining experiments with modeling and simulation has the largest potential impact.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FIU Project1: Chemical Process Alternatives for Radioactive Waste [Slides]

"The U.S. DOE Hanford Site has the largest number of high-level waste (HLW) storage tanks and the largest volume of HLW in the United States. The safe storage, retrieval, treatment, and disposal of approximately 53 million gallons of highly toxic, high-level radioactive waste stored in Hanford’s 177 underground tanks are a national priority. Retrieval and treatment of waste from these tanks pose a considerable challenge. Florida International University has been conducting research on several promising alternative processes and technologies that can be applied to address several technology gaps in the current waste retrieval and conditioning plans. Specifically, FIU has been involved in: the evaluation of non-metallic materials in the waste transfer system, evaluation of alternative HLW instrumentation for in-tank applications and the development of technologies to assist in the inspection of tank bottoms at Hanford."

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Community Solar for the Southeast (Final Report)

The Community Solar for the Southeast project provided technical assistance for cooperative and municipal utilities in the southeastern United States that are considering community solar programs. The project provided generally applicable information for these utilities in the form of an implementation guide and other freely available materials. It also provided detailed technical assistance to specific utilities in the form of feasibility analyses for possible community-scale solar (and energy storage) projects and program designs for community solar programs, all at no direct cost to the utilities. By helping to spur development of community solar projects in a region that historically had not seen much community-scale solar development, the program provided proof-of-concept for other community solar projects in the region, and helped to open up a market segment (cooperative and municipal utilities) that may have otherwise lacked the resources to independently pursue community solar development. The overall goal of the project was an expansion of community solar capacity at municipal and cooperative utilities in the southeastern United States (in this case meaning Virginia, North Carolina, South Carolina, Georgia, Florida, Kentucky, Tennessee, Alabama, and Mississippi). The specific target was to spur the development of community solar at these utilities throughout the Southeast such that at least 200 MW of community-scale solar would be developed by 2020. In order to reach this goal the project team first aimed to develop useful materials and conduct outreach with utilities and other relevant stakeholders. The team then conducted technical assistance projects to help individual utilities evaluate and, in several cases, pursue development of projects. The team conducted nine technical assistance projects in total: five in North Carolina, two in Virginia, one in Georgia, and one in Kentucky. The team also responded to smaller scale information requests from southeastern utilities throughout the project period.

14 SOLAR ENERGY↗

AFIP6-MkII and RERTR-12 Porosity Data Collection and Analysis for Modeling and Simulation

Gathering data for the improvement of nuclear fuel modeling and simulation efforts is the primary driver for this work. Mechanistic models allow for a better understanding of the material on a micro- and macrostructural level while saving time and money over traditional experiment efforts. Historically, summarized data and correlations are the inputs for empirical material models and model validation. When improving these models for nuclear fuels with experimental results, there is a lack of reliable data readily available. Experiments - RERTR-12 and AFIP6-MkII - were conducted to understand the irradiation behavior of metallic U-10Mo monolithic fuels for use in extreme reactor environments such as research reactors like the Advanced Test Reactor (ATR) or the High Flux Isotope Reactor (HFIR). Microstructural characteristics of fission gas pores (FGP) in each experiment are collected using an automated image analysis technique developed at the University of Florida and presented here. A series of statistical tests are performed to explore the reliability of the results, as well as understand where the data is lacking and what future data collection is necessary to provide sufficient information to assist modeling efforts. The focus is on the porosity, pore size, and eccentricity of FGPs formed during irradiation in three AFIP6-MkII samples and one RERTR-12 sample. From the analysis, it is clear there are substantial impacts of fission density on the pore structure, but there also exist also underlying connections between each sample and the behavior observed in the pores. Further analyses of the pre- and post-irradiation microstructure are needed to improve the understanding of these connections. An early method for microstructural data analysis is presented within and is currently being expanded to include other microstructure data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enabling Efficiencies > 22.5% with Metal Oxide Passivating Contacts using Low-Cost Spatial Atomic Layer Deposition (Final Technical Report)

In this project, the University of Central Florida (UCF) worked to both increase module efficiency and reduce manufacturing cost by driving demonstrated lab-scale passivating contact technology using materials and processes compatible with high-volume manufacturing for crystalline silicon (c-Si) photovoltaic (PV) cells. Passivating contacts have garnered significant attention in recent years. They provide a means of suppressing contact recombination, a loss mechanism that limits the performance of industrially relevant cell architectures like Al back surface field (Al-BSF) cells and passivated emitter and rear cells (PERC). Most of the development of passivating contact technology has focused on the use of doped amorphous silicon or doped polysilicon contacts, but both suffer from parasitic optical absorption amongst other issues. Our team developed fully transparent hole-selective heterojunctions, deposited using atomic layer deposition (ALD), and showed how they could be incorporated into c-Si PV cells. The team conducted experiments to understand the process-structure-property relationship of hole-selective oxides, surface passivation oxide materials, and transparent conductive oxides deposited by ALD, and use that understanding to reduce contact recombination, contact resistivity, and parasitic optical absorption within c-Si PV cells. Before getting into the details of the report, we would like to note that COVID-19 has made it more challenging to conduct experimental research at UCF. UCF has a number of mandatory policies in place to ensure social distancing, testing, and contact tracing are all carried out in day-to-day operations. Despite these challenges, we worked diligently to make progress on this project in a manner that was as safe as possible. Over the course of the project, the UCF team and its collaborators have made the following discoveries and developments.

14 SOLAR ENERGY↗

Accelerated Fuel Qualification (AFQ) Workshop I Summary Report

The first AFQ workshop was held on Friday, May 31, 2019, in Washington, DC, with over 30 expert participants from industry (General Atomics, Framatome, Lightbridge, TerraPower, Westinghouse), national labs (ANL, INL, LANL, ORNL), DOE-NE, NRC and academia (University of Florida and University of Tennessee). The overall goal of the workshop was to discuss how modeling and experiments can be simultaneously exploited to markedly reduce the years of data (and associated costs) that are currently required for deployment of new nuclear fuels utilizing the new methodology of Accelerated Fuel Qualification (AFQ). There were nine presentations given during the workshop, which included an overview presentation, five case studies, summary of relevant national lab capabilities and on-going DOE programs, as well as perspective from the NRC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impacts of the 2009 IECC for Residential Buildings at State Level

This analysis of residential energy code compares the requirements of the 2009 International Energy Conservation Code (IECC) with the residential code - or typical construction practice in the absence of a code - in most states as of June 2009. The results, which include estimated typical energy savings of updating each state's code to the 2009 IECC, are provided in chapters specific to each state. Several states have either not adopted a mandatory energy code or developed their own codes that have minimal or no connection to the IECC. The latter - including California, Florida, Oregon, and Washington - were not included in this analysis because the codes in these states would be difficult to appropriately compare to the 2009 IECC and most of these states have energy offices that have already assessed the IECC on their own.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A novel approach to mitigating the potential release of radioisotopes under fire conditions - enhancing fire resiliency of radiological contamination fixatives during deactivation & decommissioning activities

Savannah River National Laboratory (SRNL), in close collaboration with the Florida International University Applied Research Center (FIU ARC), successfully executed a technology development activity on behalf of the Department of Energy, Office of Environmental Management (DOE EM). The purpose of the activity was to improve the capability of fixative technologies in immobilizing residual contamination when exposed to thermal stressors as postulated in accident scenarios in Basis for Interim Operations (BIO) documents across the DOE EM complex. The effort resulted in the test and evaluation of a down-selected, commercial-off-the-shelf (COTS) intumescent technology in a radioactive environment at the Savannah River Site (SRS) Building 235-F Plutonium Fuel Form (PuFF) Facility and highlighted the potential use of this technology as a stand-alone, fire retardant fixative. Furthermore, this activity highlighted significant shortfalls in common fixatives currently used to support decommissioning activities and brought to the forefront the need for a methodical, uniformed approach to certifying fixative technologies for operational use in Deactivation and Decommissioning (D&D) activities. An essential component of this research was to evaluate the state of industry fixatives currently in use and set the foundation for comparison to alternative technological solutions. A baseline of five (5) commonly used fixatives and decontamination gels (hereafter collectively referred to as fixatives) was conducted, and notable shortfalls and deficiencies were revealed, particularly when exposed to thermal, water, and other environmental stressors. At temperatures as low as 300 °F - 400 °F (148.89 °C – 204.44 °C), all commonly used fixatives melted from the substrates within 3-5 minutes of exposure, resulting in contaminant transport. Significant degradation in terms of mass loss, desiccation, and off-gassing occurred, and the chemical breakdown of the polymer was so complete researchers assessed there would likely have been a release of residual contamination. Additional vulnerabilities became evident when exposed to water immersion and high humidity; existing fixatives took up water, swelling and frequently delaminating from the substrate, once again increasing the likelihood of a contaminant release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Streamlining the Coupling of BISON and Dakota Through the NEAMS Workbench

Metallic nuclear fuels for use in advanced reactors are an active area of research and development. Robust, accurate metallic fuel performance models are necessary for the design, analysis, and licensing of such reactors. However, metallic fuel performance models require additional development; they are not as mature as uranium dioxide fuel performance models. To support further metallic fuel development, Oak Ridge National Laboratory and the University of Florida have streamlined the coupling of the BISON fuel performance code with Design Analysis Kit for Optimization and Terascale Applications (Dakota) statistical analysis tool through the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Workbench. This work included performing three different sensitivity analyses on metallic nuclear fuel models in BISON. The analyses examined were a general model of the IFR-1 experiment, the X430 experiment T654 pin, and the X430 experiment T651 pin. The results suggest that BISON and Dakota can be integrated through NEAMS Workbench to perform sensitivity and uncertainty analyses and visualize the results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CO 2 Storage Capacity In Tertiary-Age Gulf Coast Coals

The Gulf Coast region contains a large, under-explored, Tertiary-age coal belt. These coals, deposited within the greater Wilcox Group cover an area stretching from southern Texas along the Gulf’s Margin, as far north as Arkansas and Tennessee, and as far east as the Florida panhandle. The Gulf Coast Tertiary Coals are deposited over an aerially extensive margin along the Northern Gulf Coast and achieve significant vertical thicknesses. Lower Wilcox coals may be present in as many as 5 to 10 seams, providing a net thickness of 15 to 25 feet when the individual seams are grouped together over a gross interval of hundreds of feet. These coals dip towards the Gulf of Mexico coastline and are found at depths of 1,000 feet to depths greater than 7,000 feet. The CO 2 storage capacity of these coals is determined using adsorption isotherms from samples throughout the region. The Tertiary coal belt is divided into three sub-plays based on geologic and political boundaries. Each sub-play has unique coal properties used in the storage calculations. These properties include area, depth, thickness, and porosity and are used with the adsorption isotherms to estimate the overall CO 2 storage capacity. The total CO 2 storage capacity estimate of these coals ranges from 20 to 28 billion metric tons (380 to 540 trillion cubic feet).

01 COAL, LIGNITE, AND PEAT↗

Geologic Assessment of the Carbon Sequestration Potential of Paleozoic Shale Gas Reservoirs in Alabama (Final Report)

Organic-rich shale formations are an increasingly important source of natural gas in the United States and have further been recognized to have large capacity for the geologic storage of carbon dioxide. Shale gas plays are active in Cambrian through Mississippian strata of the Appalachian thrust belt and Black Warrior basin of Alabama and are presently being evaluated for their resource and production potential. Gas shales are complex reservoirs and can hold gas both within matrix porosity and fractures, as well as adsorbed on organic matter and other mineral particles. Because of their unique storage duality, they have the ability to hold large volumes of gas, and thus are potentially valuable sinks for CO 2 . Using specific data on CO 2 storage, this study investigates the storage capacity of shale units in Alabama through isotherm and volumetric analysis and is part of research conducted under the Southeastern Regional Carbon Sequestration Partnership (SECARB) Phase III program. Previously, the only assessments of shale gas storage in the SECARB region were those based primarily on formation volume. The SECARB region is defined as the eleven southeastern states of Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, and Virginia. Specifically, this study considers three potential shale sinks in Alabama. The Cambrian Conasauga Formation of the Appalachian thrust belt is geologically the oldest gas shale play in the world and is host to thousands of feet of deformed shale. Preliminary work by Koperna and others first suggested the massive storage potential of this unit. The Devonian Chattanooga Shale is widespread in much of the Black Warrior basin and vicinity and is also found along the margins of the thrust belt. Both of these areas have been sites of exploration and production. An additional thick, unnamed Silurian-Devonian shale exists within the interior of the thrust belt and was grouped with the Chattanooga Shale when calculating storage estimates. The Neal interval of the Mississippian Floyd Shale is found within the southern half of the Black Warrior basin and the southwestern part of the Appalachian thrust belt within facies-related carbonate and sandstone units, but has had limited production success.

54 ENVIRONMENTAL SCIENCES↗

An Integrated Control Method for Supplemental Minisplit Heat Pumps in Existing Homes

The FSEC Energy Research Center(FSEC) at the University of Central Florida has investigated low-cost space-conditioning upgrade solutions for existing homes since 2014. The retrofits involve installing a modest capacity, centrally located, high efficiency, ductless, minisplit heat pump (MSHP) for use in conjunction with the home’s existing central space conditioning system (CSCS). This type of retrofit targets homes with older but not obsolete CSCSs that have not reached end of life, and presents a more cost-effective option to achieve space conditioning energy savings than outright CSCS replacement. This report describes results from investigating the energy savings potential, given adherence to comfort management, if the control of the MSHP and CSCS were integrated.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Physics of Channelization: Theory and Observation (Final Report)

This project investigated how the growth of erosive channels and resulting drainage networks can be influenced by the seepage of water out of the subsurface. The most significant results showed how channelization by seepage results in characteristic geometric signatures at the scale of the drainage network. These results were verified by comparing theoretical predictions to observations at a field site on the Florida Panhandle. The project's analyses of drainage networks throughout the contiguous United States suggested that seepage plays a significant role in shaping drainage systems in humid climates. Additional results concerned the shape of valley heads and the longitudinal profile of streams. Theoretical work suggested that the direction and rate of growth of streams can be predicted from symmetry arguments.

54 ENVIRONMENTAL SCIENCES↗

Sorption of Iodine Species on SRS Wetland Soils

This research work has been supported by the DOE-FIU Science & Technology Workforce Development Initiative, an innovative program developed by the U.S. Department of Energy’s Office of Environmental Management (DOE-EM) and Florida International University’s Applied Research Center (FIU-ARC). During the summer of 2021, a DOE Fellow intern, Phuong Pham, spent 10 weeks doing a summer internship at Savannah River National Laboratory under the supervision and guidance of Hansell Gonzalez-Raymat. The intern’s project was initiated on May 24, 2021, and continued through July 30, 2021, with the objective of gaining a better understanding of the dominant attenuation mechanisms for 129 I in the wetlands, the strength of the attenuation, and what conditions would influence it.

54 ENVIRONMENTAL SCIENCES↗

Characterization of Surface Water Dynamics within Fourmile Branch and its Linkages with Groundwater and I-129 Geochemistry

This research work has been supported by the DOE-FIU Science & Technology Workforce Development Initiative, an innovative program developed by the U.S. Department of Energy’s Environmental Management (DOE-EM) and Florida International University’s Applied Research Center (FIU-ARC). During the summer of 2021, DOE Fellow intern, Stevens Charles, spent 10 weeks doing a summer internship at Lawrence Berkley National Laboratory (LBNL) under the supervision and guidance of Dr. Haruko Wainwright from LBNL and Dr. Hansell GonzalezRaymat from Savannah River National Laboratory (SRNL). The intern’s project was initiated on June 1, 2020, and continued through August 6, 2020, with the objective of characterizing the surface water dynamics in the F-Area of Savannah River Site (SRS) and analyzing the surface water dynamics to find any linkages with groundwater and Iodine-129(I-129) geochemistry.

54 ENVIRONMENTAL SCIENCES↗

Combustion Kinetics Model Development & Fluid Property Experimental Investigation For Improved Design Of Supercritical CO 2 Power Cycle Components

Supercritical carbon dioxide (sCO 2 ) cycles are being investigated for the future of power generation and will contribute to a carbon-neutral future to combat the effects of climate change. These direct-fired closed cycles will produce power without adding significant pollutants to the atmosphere. For such cycles to be efficient, they will need to operate at significantly higher pressures (e.g., 300 atm for Allam Cycle) than existing systems (typically less than 40 atm). There is limited knowledge on combustion at these high pressures and with a high dilution of carbon dioxide. Also, various experimental and computational investigations and model developments have been performed by the University of Central Florida (UCF), Embry-Riddle Aeronautical University (ERAU), and Stanford University (S.U.) to improve the current knowledge base and support the design and development of sCO 2 combustors. This project's technical aspects include chemical kinetics development, fundamental sCO 2 combustion, combustion model and sub-model development, supercritical fluid injection characterization, and heat transfer characterization.

20 FOSSIL-FUELED POWER PLANTS↗

Radiation Hardened Foam Cold Test Plan – Phase-I: Foam Adhesion, Contamination Fixation, Moisture Stresses, Pipe Cutting, and Thermal Profile Testing

This document outlines the Phase-I test objectives and implementation plan for a down-selective foam fixative technology intended to facilitate activities in support of the Savannah River Site (SRS) F/H labs deactivation and decommissioning (D&D) efforts. It is a collaborative effort between Savannah River National Laboratory (SRNL), Florida International University (FIU), and the SRS F/H labs team intended to test and evaluate the potential of an intumescent, fire-retardant foam in mitigating the release of contamination during dismantling operations on radioactively contaminated piping in legacy facilities. The cold test plan addresses specific requirements highlighted by site and safety personnel and will be executed in FIU’s Outdoor Test and Evaluation Facility using a mock-up that replicates the operational conditions at the proposed hot test location at F/H labs. Results from the cold test plan will inform the hot test at F/H labs, which will use the foam fixative to confine and/or isolate residual contamination within a 3-dimensional void space of Hastelloy C-22 piping designated for removal from the site and transported to a proper disposal facility. Phase-I testing will address eight test objectives: (1) evaluation of the adhesion and bonding properties of foam fixative in piping, (2) evaluation of the adhesion of the foam fixative in piping under varying moisture conditions, (3) determination of the heat profile of the foam fixative during curing, (4) determination of the relationship between pipe diameter and foam fixative quantity, (5) determination of the internal pipe pressure after foam deployment and curing, (6) development of a leak test standard operating procedure to test for the effectiveness of the foam plug, (7) initiation of a literature review to determine if using a hot tap is a viable method to deliver foam into piping, and (8) initiation of a 10-foot mock up test that will be used in Phase-II cold testing. The cold test will be conducted at FIU and all testing activities will comply with SRNL Conduct of R&D Protocols (SRNL-IM-2020-00019).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗