Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron Accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

LH launcher Arcs Formation and Detection on JET

Mechanisms of arc formation have been analyzed and the critical electric fields for the multipactor effect calculated, compared to the experimental values and found to be within the normal operational space of the LH system on JET. It has been shown that the characteristic electron energy (20-1000)eV for the highest multipactor resonances (N = 4-9) are within the limits of secondary electron yield above 1 required for multipactoring. Electrons with these energies provide the highest gas desorption efficiency when hitting the waveguide walls. The effect of higher waveguide modes and magnetic field on the multipactor was also considered. The distribution function for electrons accelerated by LH waves in front of the launcher has been calculated. The field emission currents have been estimated and found to be small. It is proposed that emission of Fel5, 16 lines, which can be obtained with improved diagnostics, could be used to detect arcs that are missed by a protection system based on the reflected power. The reliability and time response of these signals are discussed. A similar technique based on the observation of the emission of low ionized atoms can be used for a fast detection of other undesirable events to avoid sputtering or melting of the plasma facing components such as RF antenna. These techniques are especially powerful if they are based on emission uniquely associated with specific locations and components.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A DEEP CHANDRA OBSERVATION OF THE OXYGEN-RICH SUPERNOVA REMNANT 0540-69.3 IN THE LARGE MAGELLANIC CLOUD

Using our deep {approx}120 ks Chandra observation, we report on the results from our spatially resolved X-ray spectral analysis of the 'oxygen-rich' supernova remnant (SNR) 0540-69.3 in the Large Magellanic Cloud. We conclusively establish the nonthermal nature of the 'arcs' in the east and west boundaries of the SNR, which confirms the cosmic-ray electron acceleration in the supernova shock (B {approx} 20-140 {mu}G). We report tentative evidence for Fe overabundance in the southern region close to the outer boundary of the SNR. While such a detection would be intriguing, the existence of Fe ejecta is not conclusive with the current data because of poor photon statistics and limited plasma models. If it is verified using deeper X-ray observations and improved plasma models, the presence of Fe ejecta, which was produced in the core of the supernova, near the SNR's outer boundary would provide an intriguing opportunity to study the explosive nucleosynthesis and the ejecta mixing in this young core-collapse SNR. There is no evidence of X-ray counterparts for the optical O-rich ejecta in the central regions of the SNR.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron Pre-acceleration at Nonrelativistic High-Mach-number Perpendicular Shocks

We perform particle-in-cell simulations of perpendicular nonrelativistic collisionless shocks to study electron heating and pre-acceleration for parameters that permit the extrapolation to the conditions at young supernova remnants. Our high-resolution large-scale numerical experiments sample a representative portion of the shock surface and demonstrate that the efficiency of electron injection is strongly modulated with the phase of the shock reformation. For plasmas with low and moderate temperature (plasma beta β{sub p}=5⋅10{sup −4} and β{sub p}=0.5), we explore the nonlinear shock structure and electron pre-acceleration for various orientations of the large-scale magnetic field with respect to the simulation plane, while keeping it at 90° to the shock normal. Ion reflection off of the shock leads to the formation of magnetic filaments in the shock ramp, resulting from Weibel-type instabilities, and electrostatic Buneman modes in the shock foot. In all of the cases under study, the latter provides first-stage electron energization through the shock-surfing acceleration mechanism. The subsequent energization strongly depends on the field orientation and proceeds through adiabatic or second-order Fermi acceleration processes for configurations with the out-of-plane and in-plane field components, respectively. For strictly out-of-plane field, the fraction of suprathermal electrons is much higher than for other configurations, because only in this case are the Buneman modes fully captured by the 2D simulation grid. Shocks in plasma with moderate β{sub p} provide more efficient pre-acceleration. The relevance of our results to the physics of fully 3D systems is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

NDX: Neutron Dose Rate Meters with Extended Capabilities

Particle accelerators, irradiation facilities, and nuclear power plants would benefit from using neutron dose rate meters featuring improved energy response covering full range of expected neutron energies, improved dynamic range of measured dose rates while providing the real-time data, and improved ability to operate in harsh radiation environments including heavy photon backgrounds and pulsed beams. The novel design of the neutron moderator for the NDX dose rate meter implements a layer of a Beryllium-loaded medium Z material which, similar to the earlier known WENDI detectors, allows the device to detect higher energy neutron flux and convert it to dose. Using Beryllium helps to fill the known dip in the response functions around 5-50 MeV. Optimized design parameter set, obtained using FLUKA Monte Carlo simulations, features the NDX moderator made of polyethylene embedding a layer of BeCu alloy inside, with the dose rate response constant within ±10% in the neutron energy range from about 100 keV to 500 MeV, and ±25% essentially in the full energy range above thermal. A new sensor technique implemented in the NDX is based on using the Ionization Chamber (IC) filled with 3He gas to capture the moderated neutron fluence, and includes a symmetric IC filled with regular 4He to evaluate the contributions due to the non-neutron ionizing radiation. Advantages of the method include large accessible dynamic range, relative insensitivity of the IC probes to photon radiation fields, and the ability to subtract their contribution. Two prototype NDX detectors were built, calibrated, and operated in various conditions at the CEBAF 12 GeV electron accelerator at JLab. The first results showed reliable neutron dose rate measurements in the presence of overwhelming photon radiation fields, and at practical high dose rate levels of up to approximately 10 Sv/h. Detector design, operation, first results, and further development plans are presented.

Degtiarenko, Pavel V.↗

Space Experiments with Particle Accelerators (SEPAC)

The scientific emphasis of this contract has been on the physics of beam ionosphere interactions, in particular, what are the plasma wave levels stimulated by the Space Experiments with Particle Accelerators (SEPAC) electron beam as it is ejected from the Electron Beam Accelerator (EBA) and passes into and through the ionosphere. There were two different phenomena expected. The first was generation of plasma waves by the interaction of the DC component of the beam with the plasma of the ionosphere, by wave particle interactions. The second was the generation of waves at the pulsing frequency of the beam (AC component). This is referred to as using the beam as a virtual antenna, because the beam of electrons is a coherent electrical current confined to move along the earth's magnetic field. As in a physical antenna, a conductor at a radio or TV station, the beam virtual antenna radiates electromagnetic waves at the frequency of the current variations. These two phenomena were investigated during the period of this contract.

Taylor, William W. L.↗

GRB 110721A: PHOTOSPHERE 'DEATH LINE' AND THE PHYSICAL ORIGIN OF THE GRB BAND FUNCTION

The prompt emission spectra of gamma-ray bursts (GRBs) usually have a dominant component that is well described by a phenomenological Band function. The physical origin of this spectral component is debated. Although the traditional interpretation is synchrotron radiation of non-thermal electrons accelerated in internal shocks or magnetic dissipation regions, the growing trend within the community is to interpret this component as modified thermal emission from a dissipative photosphere of a GRB fireball. We analyze the time-dependent spectrum of GRB 110721A detected by the Fermi Gamma-Ray Burst Monitor and Large Area Telescope, and pay special attention to the rapid evolution of the peak energy E{sub p} . We define a 'death line' of thermally dominated dissipative photospheric emission in the E{sub p} -L plane, and show that E{sub p} of GRB 110721A at the earliest epoch has a very high E{sub p} {approx} 15 MeV that is beyond the 'death line'. Together with the finding that an additional 'shoulder' component exists in this burst that is consistent with a photospheric origin, we suggest that at least for some bursts, the Band component is not from a dissipative photosphere, but must invoke a non-thermal origin (e.g., synchrotron or inverse Compton) in the optically thin region of a GRB outflow. We also suggest that the rapid hard-to-soft spectral evolution is consistent with the quick discharge of magnetic energy in a magnetically dominated outflow in the optically thin region.

79 ASTRONOMY AND ASTROPHYSICS↗

Performance Analysis of PIConGPU: Particle-in-Cell on GPUs using NVIDIA’s NSight Systems and NSight Compute

PIConGPU, Particle In Cell on GPUs, is an open source simulations framework for plasma and laser-plasma physics used to develop advanced particle accelerators for radiation therapy of cancer, high energy physics and photon science. While PIConGPU has been optimized for at least 5 years to run well on NVIDIA GPU-based clusters, there has been limited exploration by the development team of potential scalability bottlenecks using recently updated and new tools including NVIDIA’s NVProf tool and the brand-new NVIDIA NSight Suite (Systems and Compute) tools. PIConGPU is a highly optimized application that runs production jobs at scale on a system Oak Ridge Leadership Facility’s (OLCF) Summit supercomputer (using the full machine at 4600 nodes; at 98% of GPU utilization on all ~28000 NVIDIA Volta GPUs). PIConGPU has been selected as one of the the eight applications for OLCF’s coveted Center for Accelerated Application Readiness (CAAR) program aimed at the facility’s Frontier supercomputer (OLCF’s first exascale system to launch in 2021), to partner with our vendors (primary vendors: AMD and Cray/HPE) ensuring that Frontier will be able to perform large-scale science when it opens to users in 2022. To this effect, performance engineers on the PIConGPU team wanted to dive deep into the application to understand at the finest granularity, which portions of the code could be further optimized to exploit the hardware on Summit at it’s maximum potential and also to elucidate which key kernels should be tracked and optimized for the CAAR effort to port this code to Frontier. Any bottlenecks that are observed via performance profiling on Summit are likely to also impact scalability on the Frontier-dev system and the Frontier Early Access (EA) system. Additionally, the engineers wanted to take a closer look at the newest NVIDIA profiling tools which allows us to identify the most useful features on these tools and will provide an opportunity to compare it to new AMD and Cray’s performance analysis tool releases and provide feedback to our vendor partners on what features are most important and mission critical for CAAR efforts. The primary goal of this report is to focus on the evaluation of PIConGPU’s most time-intensive kernels using NVProf and NSight Suite. Three kernels, Current Deposition (also known as Compute Current), Particle Push (Move and Mark), and Shift Particles are known to be some of the most time-consuming kernels in PIConGPU. The Current xi Deposition kernel and Particle Push kernel both set up the particle attributes for running any physics simulation with PIConGPU, so it is crucial to improve the performance of these two kernels. In this report, we measure single GPU metrics for the three kernels, offer high level takeaways from the conducted analysis, and compare the profiling data from NSight Compute to that of NVProf. This analysis was performed using a grid size of 240 x 272 x 224, and 10 time steps with the Mid-November Figure of Merit (FOM) run setup. The Traveling Wave Electron Acceleration (TWEAC) science case used in this run is a representative science case for PIConGPU. This execution can also be used for baseline analysis on AMD MI50/ MI60 systems. As of the time of writing, the PIConGPU application has limited use for features of NSight Systems, so this report will mainly focus on insights garnered from NSight Compute. For this analysis, we run the “full” metric set available in NSight Compute version 2020.1.2 and use NSight Systems version 2020.3.1 to generate the application timeline.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the field‐aligned electric field in the polar cap

Abstract The Johns Hopkins University Applied Physics Laboratory open‐field line particle precipitation model predicts downward field‐aligned electric field to maintain charge quasi‐neutrality. Previous studies confirmed the existence of such electric fields. However, the present study shows that upward field‐aligned electric field can be found within upward field‐aligned current (FAC) region. In the upward FAC region, upward electric field that accelerates electron downward is seen with the occurrence rates of 82%–96%. In contrast, the occurrence rates in the downward FAC regions are 3%–11%. Polar rain electrons located in the upward FAC region adjacent to closed field lines often show a ramping up of energy with increasing latitude before reaching a plateau. This plateau may be attributed to the magnetosheath electrons that progressively have higher antisunward velocity and lower density with increasing distance from the subsolar point before they asymptotically reach the solar wind values.

Wing, Simon↗

An electron fixed target experiment to search for a new vector boson A' decaying to e + e -

We describe an experiment to search for a new vector boson A' with weak coupling alpha' > 6 x 10 –8 α to electrons (α' = e 2 /4π) in the mass range 65 MeV < m A' < 550 MeV. New vector bosons with such small couplings arise naturally from a small kinetic mixing of the "dark photon" A' with the photon -- one of the very few ways in which new forces can couple to the Standard Model -- and have received considerable attention as an explanation of various dark matter related anomalies. A' bosons are produced by radiation off an electron beam, and could appear as narrow resonances with small production cross-section in the trident e + e - spectrum. We summarize the experimental approach described in a proposal submitted to Jefferson Laboratory's PAC35, PR-10-009. This experiment, the A' Experiment (APEX), uses the electron beam of the Continuous Electron Beam Accelerator Facility at Jefferson Laboratory (CEBAF) at energies of ~1-4 GeV incident on 0.5-10% radiation length Tungsten wire mesh targets, and measures the resulting e+e- pairs to search for the A' using the High Resolution Spectrometer and the septum magnet in Hall A. With a ~1 month run, APEX will achieve very good sensitivity because the statistics of e+e- pairs will be ~10,000 times larger in the explored mass range than any previous search for the A' boson. These statistics and the excellent mass resolution of the spectrometers allow sensitivity to α'/α one to three orders of magnitude below current limits, in a region of parameter space of great theoretical and phenomenological interest. Similar experiments could also be performed at other facilities, such as the Mainz Microtron.

43 PARTICLE ACCELERATORS↗

Side-reaction products identified for photo-nuclear production of 99 Mo

Production of 99 Mo by the 100 Mo (γ, n) 99 Mo reaction through the bremsstrahlung process using an electron accelerator is one of the feasible options currently pursued by several countries. In this work, we report experimental results on identification of side-reaction products after the irradiation of natural and enriched 100 Mo targets. Side-reaction products identified include various Mo, Nb and Zr isotopes. Comparison of experimentally determined reaction production rates with those determined based on theoretical cross-sections will be presented. Moreover, activation products formed due to presence of impurities introduced during the manufacturing of the Mo targets will also be discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Large-scale dissolution of sintered Mo disks

Non-uranium production of 99 Mo via neutron capture or by photonuclear reaction using an electron accelerator is receiving considerable attention. For commercial production of 99 Mo, post-irradiation processes must incorporate a robust design for easy scale-up. Once developed, large-scale chemical processes must be optimized for hot-cell operations and potential automation. In this work, we present experimental results on the large-scale dissolution of sintered Mo disks using three 50% hydrogen peroxides from different suppliers. Dissolution rates obtained for 600-g Mo batches and potential reasons for different dissolution behaviors is discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Audacity of huge: overcoming challenges of data scarcity and data quality for machine learning in computational materials discovery

Machine learning (ML)-accelerated discovery requires large amounts of high-fidelity data to reveal predictive structure–property relationships. For many properties of interest in materials discovery, the challenging nature and high cost of data generation has resulted in a data landscape that is both scarcely populated and of dubious quality. Data-driven techniques starting to overcome these limitations include the use of consensus across functionals in density functional theory, the development of new functionals or accelerated electronic structure theories, and the detection of where computationally demanding methods are most necessary. When properties cannot be reliably simulated, large experimental data sets can be used to train ML models. In the absence of manual curation, increasingly sophisticated natural language processing and automated image analysis are making it possible to learn structure–property relationships from the literature. Finally, models trained on these data sets will improve as they incorporate community feedback.

36 MATERIALS SCIENCE↗

Thermally induced cracking on the massive concrete structure of the NSLS II synchrotron and its engineering remediation

Synchrotron accelerator facilities such as the NSLS II require extreme stability, both transient (short-term) and quasi-static (long-term) to achieve the desired resolution performance. Consequently, even μm-level movements, particularly differential movements between locations in the concrete structure supporting the accelerator electron beam lattice (storage ring) or high sensitivity experiments (experimental floor) will lead to serious degradation of its performance. Differential settlement in the overall structure or structural movement exceeding anticipated levels will inevitably degrade the performance and will require intervention. Presented in this paper are the design philosophy of the NSLS II ring structure favoring a monolithic ring, the observed cracking behavior of the young NSLS II concrete following casting and in combination with extreme ambient temperature fluctuation, the results of a non-linear, high-fidelity numerical analysis used to emulate the observed cracking and establish the driving mechanism, the numerical analysis-based identification of the crack-arresting solution and finally the implementation of the remediation solution and the long-term performance of the adopted engineering solution. The multi-stage process revealed that computational methods such as non-linear finite element methods have the potential of providing engineering guidance even when complex structures and in combination with non-linear materials, such as steel reinforcement and concrete are involved.

42 ENGINEERING↗

Luminescence response and CL degradation of combustion synthesized spherical SiO{sub 2}:Ce nanophosphor

Highlights: Black-Right-Pointing-Pointer A simple combustion reaction and post annealing process were adopted to generate SiO{sub 2}:Ce nanocrystalline phosphor. Black-Right-Pointing-Pointer The annealing under reductive carbon-oxygen environment rendered a partial conversion of Ce{sup 4+} to Ce{sup 3+} ions. Black-Right-Pointing-Pointer Excellent spectroscopic behavior of SiO{sub 2}:Ce{sup 3+} under various excitation stimuli is evaluated and discussed. Black-Right-Pointing-Pointer The long term columbic aging and luminescence output are monitored under a continuous 2 kV accelerated electron flux. Black-Right-Pointing-Pointer Simultaneous presence of Ce{sup 3+} and Ce{sup 4+} states in SiO{sub 2} host has been resolved using X-ray photoelectron spectroscopy (XPS). Black-Right-Pointing-Pointer The formation of a sub-stoichiometric SiO{sub x(x<2)} layer is responsible for CL degradation. -- Abstract: This study was aimed to systematically investigate the luminescence response of SiO{sub 2}:Ce{sup 3+} nanophosphors with different excitation sources. The powders were synthesized by using an urea assisted combustion method. SiO{sub 2}:Ce{sub 1m%} samples were also annealed at 1000 Degree-Sign C for 1 h in a charcoal environment to reduce incidental Ce{sup 4+} to partial Ce{sup 3+} ions. High resolution transmission electron microscopy (HRTEM) images of the as synthesized and annealed powder samples confirmed that the particles were spherical and in the size range of 3-8 nm in diameter. X-ray diffraction (XRD) and electron dispersion spectroscopy (EDS) results showed that the SiO{sub 2} was crystalline and pure. Diffused reflectance, photoluminescence (PL) and cathodoluminescence (CL) results of the SiO{sub 2}:Ce{sup 3+} samples were obtained and compared with each other. The CL degradation and the surface reactions on the surface of the SiO{sub 2}:Ce{sup 3+} were studied with X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). A clear improvement in the chemical stability of the SiO{sub 2}:Ce{sup 3+} annealed at 1000 Degree-Sign C were obtained.

36 MATERIALS SCIENCE↗

Preparation and characterization of reduced graphene oxide/Fe3O4 nanocomposite by a facile in-situ deposition method for glucose biosensor applications

Highlights: • The rGO/Fe{sub 3}O{sub 4} nanocomposite is successfully prepared by in-situ deposition. • The rGO/Fe{sub 3}O{sub 4} nanocomposite can provide an accelerated electron transfer of GOx. • The rGO/Fe{sub 3}O{sub 4}/GOx/GCE exhibits excellent performance for glucose biosensing. - Abstract: In this work, the reduced graphene oxide-Fe{sub 3}O{sub 4} nanocomposite (rGO/Fe{sub 3}O{sub 4}) was prepared by a facile in-situ deposition of Fe{sub 3}O{sub 4} nanoparticles on graphene sheets. The fact that graphene oxide (GO) was completely reduced to graphene by Fe{sup 2+} was evidenced by X-ray diffractometer, ultraviolet visible spectrophotometer, Fourier transform infrared spectrometer and X-ray photoelectron spectroscopy. The results showed Fe{sub 3}O{sub 4} nanoparticles were generated uniformly and bonded on the surface of rGO with a particle size of about 50 nm. In addition, the rGO/Fe{sub 3}O{sub 4} nanocomposite showed a good conductivity and was considered as a high volume-surface ratio matrix for the immobilization of glucose oxidase (GOx) on a glassy carbon electrode (GCE). The fabricated rGO/Fe{sub 3}O{sub 4}/GOx/GCE exhibited a fast electron transfer and good electrocatalytic activity due to the good electrochemical properties of the rGO/Fe{sub 3}O{sub 4} nanocomposite. These results demonstrated that the rGO/Fe{sub 3}O{sub 4} nanocomposite prepared by in-situ deposition could be applied to high performance biosensor for glucose detection.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Micromegas detectors for CLAS12

The electron accelerator of the Thomas Jefferson Laboratory (VI, USA) will soon be upgraded to deliver 12 GeV high intensity beams. This increase in the performance will give the opportunity to study the nucleon structure with an unprecedented accuracy. To meet this end, new equipments will be installed in the experimental areas, particularly in the Hall B/CLAS spectrometer. One of the most challenging aspects is the installation of a Central Tracker surrounding the target, dedicated to the detection of particles emitted at large angles. Micromegas detectors have been chosen to be a major element of this new equipment, due to their high rate capability as well as their robustness and light material. Using the recent bulk technology, part of these gaseous detectors are planned to be assembled in thin cylinders to maximize the acceptance. On the other hand, the presence of a strong magnetic field either perpendicular or parallel to the readout strips has important consequences which need to be carefully investigated. Finally, resistive Micromegas have been studied to further improve the rate capability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Progress of the development of the ELI-NP GBS high level applications

The Gamma Beam System (GBS) is a high brightness LINAC to be installed in Magurele (Bucharest) at the new ELINP (Extreme Light Infrastructure - Nuclear Physics) laboratory. The accelerated electrons, with energies ranging from 280 to 720 MeV, will collide with a high power laser to produce tunable high energy photons (0.2-20MeV ) with high intensity (10 13 photons/s), high brilliance and spectral purity (0.1%BW), through the Compton backscattering process. This light source will be open to users for nuclear photonics and nuclear physics advanced experiments. Tested high level applications will play an important role in commissioning and operation. In this paper we report the progress and status of the development of dedicated high level applications. We also present the results of the test on the FERMI LINAC of the electron trajectory control method based on Dispersion Free Steering.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Sub-MeV ultra-compact linac for radioactive isotope sources replacement, non-destructive testing, security and medical applications

RadiaBeam Technologies, LLC has developed an inexpensive, hand-portable 180 keV electron accelerator to replace 57 Co radionuclide sources in Cascade Header Enrichment Monitor detectors. We used two innovative technologies in our design: a Ku-band (1 cm wavelength) magnetron, and a split accelerating structure design to reduce manufacturing costs. In this paper, we will discuss the accelerator, including X-ray convertor and accelerating structure design. The results of RF measurements of a Ku-band split structure prototype will also be reviewed. Other applications of Ku-band linacs include compact backscatter and transmission X-ray security inspection systems, as well as computed tomography (CT) systems for luggage and parcel screening. The main requirement for luggage inspection systems is that the X-ray source must be extremely compact. Further, the required energies should cover the range from 180 keV to 1 MeV. In this paper, we will discuss the linac’s energy scalability and other modifications that will enable our technology to address these applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗