Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Characterization of an aluminum alloy hemispherical shell fabricated via direct metal laser melting

The ability of additive manufacturing to directly fabricate complex shapes provides characterization challenges for part qualification. The orientation of the microstructures produced by these processes will change relative to the surface normal of a complex part. In this work, the microscopy and x-ray tomography of an AlSi10Mg alloy hemispherical shell fabricated using powder bed metal additive manufacturing are used to illustrate some of these challenges. The shell was manufactured using an EOS M280 system in combination with EOS-specified powder and process parameters. The layer-by-layer process of building the shell with the powder bed additive manufacturing approach results in a position-dependent microstructure that continuously changes its orientation relative to the shell surface normal. X-ray tomography was utilized to examine the position-dependent size and distribution of porosity and surface roughness in the 98.6% dense part. Optical and electron microscopy were used to identify global and local position-dependent structures, grain morphologies, chemistry, and precipitate sizes and distributions. The rapid solidification processes within the fusion zone (FZ) after the laser transit results in a small dendrite size. Cell spacings taken from the structure in the middle of the FZ were used with published relationships to estimate a cooling rate of ~9 × 10 5 K/s. Uniformly-distributed, nanoscale Si precipitates were found within the primary α-Al grains. A thin, distinct boundary layer containing larger α-Al grains and extended regions of the nanocrystalline divorced eutectic material surrounds the FZ. Moreover, subtle differences in the composition between the latter layer and the interior of the FZ were noted with scanning transmission electron microscopy (STEM) spectral imaging.

36 MATERIALS SCIENCE↗

A SOAP Web Service for accessing MODIS land product subsets

Remote sensing data from satellites have provided valuable information on the state of the earth for several decades. Since March 2000, the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor on board NASA s Terra and Aqua satellites have been providing estimates of several land parameters useful in understanding earth system processes at global, continental, and regional scales. However, the HDF-EOS file format, specialized software needed to process the HDF-EOS files, data volume, and the high spatial and temporal resolution of MODIS data make it difficult for users wanting to extract small but valuable amounts of information from the MODIS record. To overcome this usability issue, the NASA-funded Distributed Active Archive Center (DAAC) for Biogeochemical Dynamics at Oak Ridge National Laboratory (ORNL) developed a Web service that provides subsets of MODIS land products using Simple Object Access Protocol (SOAP). The ORNL DAAC MODIS subsetting Web service is a unique way of serving satellite data that exploits a fairly established and popular Internet protocol to allow users access to massive amounts of remote sensing data. The Web service provides MODIS land product subsets up to 201 x 201 km in a non-proprietary comma delimited text file format. Users can programmatically query the Web service to extract MODIS land parameters for real time data integration into models, decision support tools or connect to workflow software. Information regarding the MODIS SOAP subsetting Web service is available on the World Wide Web (WWW) at http://daac.ornl.gov/modiswebservice.

99 GENERAL AND MISCELLANEOUS↗

Strange stars in Krori–Barua spacetime under f(R,T) gravity

Highlights: We study anisotropic strange star in f(R,T) gravity under Krori–Barua spacetime. The set of solutions provides non-singular as well as stable stellar model. Using observed values for mass and radius, we calculate different physical parameters. The coupling constant χ, between matter and geometry, is the key factor in f(R,T) gravity. - Abstract: In the present work, we study about highly dense compact stars which are made of quarks, specially strange quarks, adopting the Krori–Barua (KB) (Krori and Barua, 1975) metric in the framework of f(R,T) gravity. The equation of state (EOS) of a strange star can be represented by the MIT bag model as p r (r)=(1/3)[ρ(r)-4B g ] where B g is the bag constant, arises due to the quark pressure. Main motive behind our study is to find out singularity free and physically acceptable solutions for different features of strange stars. Here we also investigate the effect of alternative gravity in the formation of strange stars. We find that our model is consistent with various energy conditions and also satisfies Herrera’s cracking condition, TOV equation, static stability criteria of Harrison–Zel'dovich–Novikov etc. The value of the adiabatic indices as well as the EOS parameters re-establishes the acceptability of our model. Here in detail we have studied specifically three different strange star candidates, viz. PSRJ 1614 2230,Vela X-1 and Cen X-3. As a whole, present model fulfils all the criteria for stability. Another fascinating point we have discussed is the value of the bag constant which lies in the range (40-45) MeV/fm 3 . This is quite smaller than the predicted range, i.e., (55–75) MeV/fm 3 (Farhi and Jaffe, 1984 [2]; Alcock et al., 1986 [3]). The presence of the constant (χ), arises due to the coupling between matter and geometry, is responsible behind this reduction in B g value. For χ=0, we get the higher value for B g as the above mentioned predicted range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MechElastic: A Python library for analysis of mechanical and elastic properties of bulk and 2D materials

We report the MechElastic Python package evaluates the mechanical and elastic properties of bulk and 2D materials using the elastic coefficient matrix ( C ij ) obtained from any ab-initio density-functional theory (DFT) code. The current version of this package reads the output of VASP, ABINIT, and Quantum Espresso codes (but it can be easily generalized to any other DFT code) and performs the appropriate post-processing of elastic constants as per the requirement of the user. This program can also detect the input structure's crystal symmetry and test the mechanical stability of all crystal classes using the Born-Huang criteria. Various useful material-specific properties such as elastic moduli, longitudinal and transverse elastic wave velocities, Debye temperature, elastic anisotropy, 2D layer modulus, hardness, Pugh's ratio, Cauchy's pressure, Kleinman's parameter, and Lame's coefficients, can be estimated using this program. Another existing feature of this program is to employ the ELATE package (2016) [29] and plot the spatial variation of several elastic properties such as Poisson's ratio, linear compressibility, shear modulus, and Young's modulus in three dimensions. Further, the MechElastic package can plot the equation of state (EOS) curves for energy and pressure for a variety of EOS models such as Murnaghan, Birch, Birch-Murnaghan, and Vinet, by reading the inputted energy/pressure versus volume data obtained via numerical calculations or experiments. This package is particularly useful for the high-throughput analysis of elastic and mechanical properties of materials.

2D materials↗

Evaluating meteorological data from weather stations, and from satellites and global models for a multi-site epidemiological study

Highlights: • Earth observation data has potential for use in epidemiology but is seldom validated. • The performance of two EO products varied depending on numerous factors. • Epidemiologists should use their own weather stations to record meteorological data. • Daily estimates of meteorological variables are associated with rotavirus infection. • Choice of climate data source should be determined by the research question. Longitudinal and time series analyses are needed to characterize the associations between hydrometeorological parameters and health outcomes. Earth Observation (EO) climate data products derived from satellites and global model-based reanalysis have the potential to be used as surrogates in situations and locations where weather-station based observations are inadequate or incomplete. However, these products often lack direct evaluation at specific sites of epidemiological interest.

54 ENVIRONMENTAL SCIENCES↗

Modeling fluid phase equilibria of carbon dioxide-methanol binary system

Accurate fluid phase equilibria modeling of carbon dioxide-methanol binary system is essential for numerous industrial applications. Prior modeling studies were limited in scope in terms of temperature and pressure ranges. In this study, the phase equilibria behavior of the binary system is modeled with cubic equations-of-state (EoS) including Peng-Robinson (PR) and Soave-Redlich-Kwong with various mixing rules, Predictive Soave-Redlich-Kwong, Cubic Plus Association, and Perturbed-Chain Statistical Associating Fluid Theory. Among them, the classical PR EoS and its variants yield the overall best results in representing the phase behavior at temperature above 330 K. Furthermore, PR incorrectly predicts two liquid phases when the CO 2 mole fraction exceeds ~ 0.4 at temperature lower than 330 K. Raoult’s law with the classical nonrandom two-liquid excess Gibbs energy model is recommended for the low temperature conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bridging adsorption behavior of confined CH 4 -CO 2 binary mixtures across scales

An accurate understanding of the competitive adsorption of CH 4 -CO 2 binary mixtures in nano-confined systems is critical for engineering CO 2 storage in shale gas reservoirs. Due to difficulties in making reliable experimental observations in nano-scale, atomistic simulations (ASs), such as the Grand Canonical Monte Carlo (GCMC) method, provide a viable approach to studying the adsorption behavior of confined fluids. ASs are, however, limited in the size of the compositional domain due to the high computational cost. This work proposes a framework that combines AS and the lattice Boltzmann (LB) method to bridge the physics of confined fluids across scales. The Peng–Robinson equation of state (PR-EoS) produces fugacity coefficients, which serve as input for conducting multi-component GCMC simulations. These GCMC simulations explore the competitive adsorption behavior of CH 4 -CO 2 in nano-slits at various composition, pressure, and channel-width conditions. Both components generate adsorption layers with high densities near the walls with CO 2 preferentially adsorbing compared to CH 4 on the organic walls of carbon sheets. At the mesoscale, a pseudopotential model represents the intermolecular forces in multi-component, multiple-relaxation-time LB simulations. The LB simulations are in good agreement with the GCMC results, allowing us to obtain values for tunable LB parameters. We then extend the use of LB to simulate adsorption behavior in complex networks with nano-sized channels. The phase behavior and fluid properties in the complex geometries of nano-channels differ from nano-slits and bulk systems. Furthermore, the bridging of physics from GCMC (microscale) to LB (mesoscale) via the macroscale PR-EoS connects the adsorption behavior of binary systems across scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cross-Code verification and sensitivity analysis to effectively model the electrothermal instability

This manuscript presents verification cases that are developed to study the electrothermal instability (ETI). Specific verification cases are included to ensure that the unit physics components necessary to model the ETI are accurate, providing a path for fluid-based codes to effectively simulate ETI in the linear and nonlinear growth regimes. Two software frameworks with different algorithmic approaches are compared for accuracy in their ability to simulate diffusion of a magnetic field, linear growth of the ETI, and a fully nonlinear ETI evolution. The nonlinear ETI simulations show early time agreement, with some differences emerging, as noted in the wavenumber spectrum, late into the nonlinear development of ETI. Here, a sensitivity study explores the role of equation-of-state (EOS), vacuum density, and vacuum resistivity. EOS and vacuum resistivity are found to be the most critical factors in the modeling of nonlinear ETI development.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simulations of high-velocity impacts on metal in preparation for the Psyche mission

In 2026, the NASA Discovery mission Psyche will orbit the asteroid (16) Psyche, the largest known metal-rich asteroid in the main belt. To estimate relative ages of the surface, identify re-surfacing events and better constrain Psyche's history, impact craters will be counted and characterized. No spacecraft has ever visited a metal-rich small body; therefore, laboratory-scale impact experiments and numerical simulations will play an important role in the interpretation of the mission's data. However, the planetary applications of high-velocity impacts have so far mostly been studied for silicate targets. Limited attention has been drawn to planetary objects predominantly made of metal, and more laboratory experiments and numerical calibrations are needed. As part of this effort, we present a suite of numerical simulations using an adaptative smoothed particles hydrodynamics numerical code (ASPH) reproducing a high-velocity impact experiment conducted on a steel target. This work primarily focuses on the influence of the chosen equation of state and initial distribution of flaws in the material on the estimated crater dimensions, damage and temperature. Additionally, we find that changing the EOS and initial flaw distribution affects the crater dimensions, though for a vast majority of cases the dimensions remain within 20% of the experimental values. The target is in most cases only locally weakened but not fully damaged, independently from the EOS chosen. Finally, temperatures at the impact point and around the forming crater can reach values above the melting point of iron at <100 GPa, which is in agreement with experimental observations. These results allow us to speculate on the differences expected between the surfaces of visited silicate-rich asteroids and that of the metal-rich target of the Psyche mission.

36 MATERIALS SCIENCE↗

Phase diagrams and microstructures of aqueous short alkyl chain polyethylene glycol ether carboxylate and carboxylic acid triblock surfactant solutions

The surfactant C 8 Eo 8 CH 2 COOH (Akypo LF2) and its salts have a small hydrophobic and a significantly longer hydrophilic part. As a consequence, there must be a significant steric constraint, once these surfactant molecules form micelles. In addition, the partially charged headgroups should bring some additional fine-tuning via electrostatic interactions to this "essentially non-ionic" surfactant. Experiments: Phase diagrams of binary mixtures of water and C 8 Eo 8 CH 2 COOH are established over large concentration and temperature ranges, also at different pHs and in the presence of sodium and calcium ions. Surface tensions and osmotic pressures are measured to understand the systems. To evaluate the microstructures, also Dynamic Light Scattering and Small-Angle X-ray Scattering are performed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements and modeling of high-temperature, high-pressure density for binary mixtures of propane with n-decane and propane with n-eicosane

Binary mixture density data are reported for propane (C 3 ) with n-decane (C 10 ) and with n-eicosane (C 20 ) at T = (320 to 525) K and pressures to 265 MPa. The (C 3 + C 10 ) mixture density data are in good agreement with available literature data to 70 MPa, which is the maximum reported literature pressure. We found that there are no available binary mixture density data to compare to the (C 3 + C 20 ) mixture density data reported in the present study. Furthermore, the mixture density data are correlated with the Tait equation to facilitate interpolation of the data at different experimental conditions. Equations of state that are suitable for reservoir simulations are used to model the reported data. These models include the Peng–Robinson equation of state (PREoS), a volume-translated PREoS fit to high temperature, high pressure (HTHP) pure component density data, the PC-SAFT EoS, and modifications of the PC-SAFT EoS developed for better representation of HTHP data. As a result, the models give superior density predictions for (C 3 + C 10 ) mixtures compared to (C 3 + C 20 ) mixtures.

02 PETROLEUM↗

Analytical model of the effect of misfit dislocation character on the bubble-to-void transition in metals

Here, this paper addresses the role of misfit dislocations in the nucleation and growth of nanoscale He bubbles at interfaces. In a recent work, we studied the nanoscale effects on the capillarity equation and on equilibrium conditions. We proposed an expression for surface energy and for the equation of state, EOS, for He in bubbles, which have a size dependence that captures the role of the interface forces, which become relevant at the nanoscale. Here we determine the EOS for several twist grain boundaries in Fe and Cu and incorporate these results into the rate equation that determines the bubble-to-void transition, focusing on the influence of interface dislocations on the evaporation rate of vacancies. We find a significant effect of the magnitude of the Burgers vector of the dislocations on the critical radius for the transition. In conclusion, these results give a quantitative way to characterize grain boundaries in their ability to capture He and alter the onset of swelling.

36 MATERIALS SCIENCE↗

Electronic structure and chemical bonding of {alpha}- and {beta}-CeIr{sub 2}Si{sub 2} intermediate valence compounds

The dimorphism of the intermediate valence ternary cerium silicide CeIr{sub 2}Si{sub 2} in the ThCr{sub 2}Si{sub 2} ({alpha}) and CaBe{sub 2}Ge{sub 2} ({beta}) modifications is addressed in the framework of the density functional theory. The geometry optimization is in good agreement with the experiment and the subsequent establishment of the energy-volume equation of state (EOS) indicates a stabilization of the {beta}-type relative to the {alpha}-type concomitant with the trend of the cerium valence, changing to tetravalent in {beta}-CeIr{sub 2}Si{sub 2}. This is equally shown from the site projected DOS and from the large increase of the electronic contribution to the specific heat. The chemical bonding indicates the strongest bonding interactions within the Ir-Si substructure in both varieties. Stabilization of {beta}-CeIr{sub 2}Si{sub 2} with almost tetravalent cerium is in good agreement with Th{sup IV}Ir{sub 2}Si{sub 2} which exclusively crystallizes in the CaBe{sub 2}Ge{sub 2} type. The EOS behavior of different RIr{sub 2}Si{sub 2} (R=Th, Ce, La) is comparatively discussed. - Graphical abstract: The crystal structures of {alpha}- and {beta}-CeIr{sub 2}Si{sub 2}. Relevant interatomic distances (A), the three-dimensional [Ir{sub 2}Si{sub 2}] networks and the crystallographically independent iridium and silicon sites are indicated. Highlights: Black-Right-Pointing-Pointer Energy stabilization of (HT) {beta}-CeIr{sub 2}Si{sub 2} versus (LT) {alpha}-CeIr{sub 2}Si{sub 2} from DFT methods. Black-Right-Pointing-Pointer Concomitant with the change of Ce valence to tetravalent (HT)-enhanced specific heat. Black-Right-Pointing-Pointer Equations of states for La, Ce and Th members with CeIr{sub 2}Si{sub 2} resembling tetravalent-Th. Black-Right-Pointing-Pointer Chemical bonding shows changes on the {l_brace}Ir{sub 2}Si{sub 2}{r_brace} intralayer and Ce{sup IV}-Ir bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A 3D complex containing novel 2D Cu{sup II}-azido layers: Structure, magnetic properties and effects of 'Non-innocent' reagent

A novel copper-azido coordination polymer, [Cu{sub 2}(N{sub 3}){sub 3}(L)]{sub n} (1, HL=pyrazine-2-carboxylic acid), has been synthesized by hydrothermal reaction with 'Non-innocent' reagent in the aqueous solution. In the reaction system, Cu{sup II} ions are avoided to reduce to Cu{sup I} ions due to the existence of Nd{sup III}. It is found that the complex is a 3D structure based on two double EO azido bridged trimmers and octahedron Cu{sup II} ions, in which the azide ligands take on EO and {mu}{sub 1,1,3} mode to form Cu{sup II}-azido 2D layers, furthermore L ligands pillar 2D layers into an infinite 3D framework with the Schlaefli symbol of {l_brace}4;6{sup 2}{r_brace}4{l_brace}4{sup 2};6{sup 12};8{sup 10};10{sup 4}{r_brace}{l_brace}4{sup 2};6{sup 4}{r_brace}. Magnetic studies revealed that the interactions between the Cu{sup II} ions in the trimmer are ferromagnetic for the Cu-N-Cu angle nearly 98 Degree-Sign , while the interactions between the trimmer and octahedron Cu{sup II} ion are antiferromgantic and result in an antiferromagnetic state. - Graphical abstract: A 3D complex containing novel 2D Cu{sup II}-azido layers, [Cu{sub 2}(N{sub 3}){sub 3}(L)]{sub n} (HL=pyrazine-2-carboxylic acid), was synthesized by hydrothermal reaction and exhibit interesting structure and magnetic properties. Highlights: Black-Right-Pointing-Pointer 'Non-innocent' reagents plays a key role in the process of formation of this complex. Black-Right-Pointing-Pointer 2D layer is formed only by Cu{sup II} ions and azido ligands. Black-Right-Pointing-Pointer Pyrazine-2-carboxylate ligands reinforce 2D layers and pillar them into an infinite 3D framework. Black-Right-Pointing-Pointer Magnetic study indicates that alternating FM-AF coupling exists in the complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled release of ibuprofen by meso–macroporous silica

Structured meso–macroporous silica was successfully synthesized from an O/W emulsion using decane as a dispersed phase. Sodium silicate solution, which acts as a silica source and a poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (EO{sub 19}PO{sub 39}EO{sub 19}) denoted as P84 was used in order to stabilize the emulsion and as a mesopore template. The materials obtained were characterized through transmission electron microscopy (TEM), scanning electron microscopy (SEM), small-angle X-ray diffraction scattering (SAXS) and nitrogen adsorption–desorption isotherms. Ibuprofen (IBU) was selected as the model drug and loaded into ordered meso–macroporous materials. The effect of the materials’ properties on IBU drug loading and release was studied. The results showed that the loading of IBU increases as the macropore presence in the material is increased. The IBU adsorption process followed the Langmuir adsorption isotherm. A two-step release process, consisting of an initial fast release and then a slower release was observed. Macropores enhanced the adsorption capacity of the material; this was probably due to the fact that they allowed the drug to access internal pores. When only mesopores were present, ibuprofen was probably adsorbed on the mesopores close to the surface. Moreover, the more macropore present in the material, the slower the release behaviour observed, as the ibuprofen adsorbed in the internal pores had to diffuse along the macropore channels up to the surface of the material. The material obtained from a highly concentrated emulsion was functionalized with amino groups using two methods, the post-grafting mechanism and the co-condensation mechanism. Both routes improve IBU adsorption in the material and show good behaviour as a controlled drug delivery system. - Graphical abstract: Ibuprofen release profiles for the materials obtained from samples P84{sub m}eso (black diamonds), P84{sub 2}0% (white squares), P84{sub 5}0% (black triangles), P84{sub 7}5% (white diamonds), P84{sub 7}5% functionalized by grafting (black squares) and P84{sub 7}5% functionalized by co-condensation method (white triangles). Display Omitted - Highlights: • Ordered meso–macroporous material is used as a controlled delivery system for ibuprofen. • Incorporation of macropores in mesoporous silica improves ibuprofen adsorption. • Meso–macroporous structures provide a lower delivery than mesoporous silica. • APTES functionalization in meso–macroporous materials improves ibuprofen adsorption and delivery behaviour.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic properties of FeCrMnNi, a high entropy alloy

The goal of this paper was to assess the dynamic properties of a new class of materials, High entropy alloys (HEAs). Specifically, gas gun experiments coupled with recovery were performed on a specific HEA, FeCrMnNi, to measure its equation of state (EOS) and its spall strength, which is a measure of the stress required to nucleate voids under shock loading conditions. While there has been a plethora of work performed to assess the mechanical properties of these HEAs under uniaxial stress conditions as a function of strain rate, investigation of its properties in dynamic extremes remains rare. The current work fills this gap in knowledge for this novel class of materials. Our results show that the measured EOS for this material at one velocity was in reasonable agreement with an estimated Hugoniot. Furthermore, while the spall strength for this material was found to be ~1.9 GPa, with some variation based on sample location, the main failure mode was brittle. This brittle failure leading to formation of cracks in the material is different than the ductile failure observed in pure iron and its alloys.

36 MATERIALS SCIENCE↗

Equation of State from Lattice QCD Calculations

We provide a status report on the calculation of the Equation of State (EoS) of QCD at finite temperature using lattice QCD. Most of the discussion will focus on comparison of recent results obtained by the HotQCD and Wuppertal-Budapest collaborations. We will show that very significant progress has been made towards obtaining high precision results over the temperature range of T = 150-700 MeV. The various sources of systematic uncertainties will be discussed and the differences between the two calculations highlighted. Our final conclusion is that these lattice results of EoS are precise enough to be used in the phenomenological analysis of heavy ion experiments at RHIC and LHC.

ACCURACY↗

Towards QCD-assisted hydrodynamics for heavy-ion collision phenomenology

Heavy-ion collisions are well described by a dynamical evolution with a long hydrodynamical phase. In this phase the properties of the strongly coupled quark-gluon plasma are reflected in the equation of state (EoS) and the transport coefficients, most prominently by the shear and bulk viscosity over entropy density ratios η/s( T ) and ς/s( T ), respectively. While the EoS is by now known to a high accuracy, the transport coefficients and in particular their temperature and density dependence are not well known from first-principle computations yet, as well as the possible influence they can have once used in hydrodynamical simulations. In this work, the most recent QCD-based parameters are provided as input to the MUSIC framework. A ratio η/s( T ) computed with a QCD based approach is used for the first time [1, 2]. The IP-Glasma model is used to describe the initial energy density distribution, and UrQMD for the dilute hadronic phase. Simulations are performed for Pb–Pb collisions at √ s NN = 2.76 TeV, for different centrality intervals. The resulting kinematic distributions of the particles produced in the collisions are compared to data from the LHC, for several experimental observables. Furthermore, the high precision of the experimental results and the broad variety of observables considered allow to critically verify the quality of the description based on first-principle input to the hydrodynamic evolution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗