Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Lasing from the domain of collision of ionisation waves produced due to electric field concentration at electrodes with a small radius of curvature

The characteristics of UV lasing in nitrogen and of diffusive discharge produced without an additional ionisation source were experimentally investigated in a nonuniform electric field formed by electrodes with different profiles. High-voltage nanosecond pulses were applied to the blade- and cylinder-shaped electrodes. It was determined that the gap breakdown at elevated pressure was caused by diffusive jets which propagate from the electrodes with a small radius of curvature. The electric field increased in the intersection of counter-propagating jets, with the effect that the threshold of lasing in the C{sup 3}{Pi}{sub u} - B{sup 3}{Pi}{sub g} ({lambda} = 337.1 nm) molecular nitrogen band was attained for low average electric fields (below 60 V cm{sup -1} Torr{sup -1}) and at pressures of 760 Torr and above. With lowering the pressure from 760 to 20 Torr, the voltage of gap breakdown in the nonuniform electric field was observed to increase for a voltage pulse rise time of {approx}300 ps and to decrease for a pulse rise time of {approx}2 ns.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Origin for electrochemically driven phase transformation in the oxygen electrode for a solid oxide cell

The next generation of fuel cells, electrolyzers, and batteries requires higher power, faster kinetics, and larger energy density, which necessitate the use of compositionally complex oxides to achieve multifunctionalities and activity. These compositionally complex oxides may change their phases and structures during an electrochemical process—a so-called “electrochemically driven phase transformation.” The origin for such a phase change has remained obscure. The aim of this paper is to present an experimental study and a theoretical analysis of phase evolution in praseodymium nickelates. Nickelate-based electrodes show up to 60 times greater phase transformation during operation when compared with thermally annealed ones. Theoretical analysis suggests that the presence of a reduced oxygen partial pressure at the interface between the oxygen electrode and the electrolyte is the origin for the phase change in an oxygen electrode. Guided by the theory, the addition of the electronic conduction in the interface layer leads to the significant suppression of phase change while improving cell performance and performance stability.

25 ENERGY STORAGE↗

Insights on the cycling behavior of a highly-prelithiated silicon–graphite electrode in lithium-ion cells

Nanosized silicon materials are being developed for use in the anodes of high-energy lithium-ion batteries. However, the high surface areas of these materials increase the rate of parasitic reactions in the electrode, which consume cyclable Li + and degrade battery performance. Prelithiation offers a realistic strategy to compensate for this reactivity, by injecting additional charge into the cell to counterbalance the Li + loss. Interestingly, the benefits offered by prelithiation extend beyond its more obvious purpose. Here, by using a reference electrode in NMC532//Si–Gr cells, we show how prelithiation alters the cycling potentials experienced by the Si-containing anode and how that translates into gains in cycle life. The rate of consumption of the prelithiated charge is lower than that expected from the behavior of non-prelithiated cells. Curiously, the Si particles become partially unresponsive during the C/3 cycling apparently because of kinetic constraints. Electrochemical studies on harvested electrodes in half-cells show that capacities are intact after the long-term cycling and that most of the lithium reservoir is still present in the anode. We conclude that the high capacity retention displayed by the prelithiated cells mainly results from a higher participation of graphite particles during the extended electrochemical cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-voltage and electrode system for a cryogenic experiment to search for the neutron electric dipole moment

The cryogenic approach to the search for the neutron electric dipole moment—performing the experiment in superfluid liquid helium—holds promise for a substantial increase in sensitivity, potentially enabling a sensitivity level of 10 −28 𝑒cm. A crucial component in realizing such an experiment is the high-voltage and electrode system capable of providing an electric field of 75 kV/cm. This, in turn, requires an electric potential of 635 kV to be applied to the high-voltage electrode, while simultaneously satisfying other experimental constraints, such as those on heat load and magnetic noise requirements. In this work, we describe the outcome of a comprehensive development program addressing these challenges. It outlines the system requirements, discusses new insights into relevant physical phenomena, and details selected technical solutions with their corresponding experimental demonstrations and expected performance. The results collectively demonstrate the successful development of the necessary technology for the high-voltage and electrode system for this approach.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Buried-Electrode Hybrid Bonded Thin-Film Lithium Niobate Electro-Optic Mach-Zehnder Modulators

Hybrid bonded silicon nitride thin-film lithium niobate (TFLN) Mach-Zehnder modulators (MZMs) at 1310 nm were designed with metal coplanar waveguide electrodes buried in the silicon-on-insulator (SOI) chip. Here, the MZM devices showed greatly improved performance compared to earlier devices of a similar design, and similar performance to comparable MZM devices with gold electrodes made on top of the TFLN layer. Both devices achieve a 3-dB electro-optic bandwidth greater than 110 GHz and voltage-driven optical extinction ratios greater than 28 dB. Half-wave voltage-length products (VπL) of 2.8 and 2.5 V∙ cm were measured for the 0.5 and 0.4 cm long buried metal and top gold electrode MZMs, respectively.

42 ENGINEERING↗

Effect of Approach Speed and Electrode Geometry on Electrostatic Discharges Off Floating Dielectrics

With the damaging effects of electrostatic discharges (ESDs), it is important to study them within various parameter regimes relevant to real-world scenarios. One such scenario studied here is a floating dielectric with no nearby ground plane with a grounded object approaching at a high rate of speed. One may encounter this scenario when moving objects by hand. Discharge current and radiated fields are captured for discharges drawn from polytetrafluoroethylene (PTFE) and poly methyl methacrylate (PMMA) with approach speeds ranging from 20 to 100 mm/s. Previous studies have shown that at lower speeds in metal-to-metal or metal-to-ground backed dielectric geometries, the peak current and discharge distance decrease with increasing speed. However, in the speed range studied here, an increase in distance and current are observed for increasing speed. Namely, the highest speeds coincide with the highest peak currents and discharge distances of approximately 800 mA and up to 24 mm. Further, with no grounded backing, as opposed to setups in other ESD studies, the electric field between the dielectric and an approaching electrode has a more uniform distribution with highest fields at the electrode, which is elucidated to be the driving factor in the differences revealed in this study. Two spheres of differing diameters and a conical electrode are used to draw discharges off the dielectric surfaces. Captured radiated fields via B-dot sensor, plasma imagery via intesified charge-coupled device (ICCD), and mapping of surface potential reveal that a majority of the energy lost during a discharge goes to gas losses and radiated fields.

36 MATERIALS SCIENCE↗

Analysis of Long-Range Interaction in Lithium-Ion Battery Electrodes

The lithium-ion battery (LIB) electrode represents a complex porous composite, consisting of multiple phases including active material (AM), conductive additive, and polymeric binder. This study proposes a mesoscale model to probe the effects of the cathode composition, e.g., the ratio of active material, conductive additive, and binder content, on the electrochemical properties and performance. The results reveal a complex nonmonotonic behavior in the effective electrical conductivity as the amount of conductive additive is increased. Insufficient electronic conductivity of the electrode limits the cell operation to lower currents. Once sufficient electron conduction (i.e., percolation) is achieved, the rate performance can be a strong function of ion-blockage effect and pore phase transport resistance. In conclusion, even for the same porosity, different arrangements of the solid phases may lead to notable difference in the cell performance, which highlights the need for accurate microstructural characterization and composite electrode preparation strategies.

25 ENERGY STORAGE↗

Tailored ion energy distributions on plasma electrodes

As microelectronic device features continue to shrink approaching atomic dimensions, control of the ion energy distribution on the substrate during plasma etching and deposition becomes increasingly critical. The ion energy should be high enough to drive ion-assisted etching, but not too high to cause substrate damage or loss of selectivity. In many cases, a nearly monoenergetic ion energy distribution (IED) is desired to achieve highly selective etching. In this work, the author briefly reviews: (1) the fundamentals of development of the ion energy distribution in the sheath and (2) methods to control the IED on plasma electrodes. Such methods include the application of “tailored” voltage waveforms on an electrode in continuous wave plasmas, or the application of synchronous bias on a “boundary electrode” during a specified time window in the afterglow of pulsed plasmas.

36 MATERIALS SCIENCE↗

Physical processes involved in strip electrode welding using the method of slatted splicing

Physical processes that take place in a strip electrode during welding using the slatted splicing technique are considered. Flowing of the welding current in the electrode is shown to be the key process which determines electrode heating and melting. Technological receipts are proposed that allow obtaining high-quality welds by the method of slatted splicing.

36 MATERIALS SCIENCE↗

Structure of platinum–carbon electrodes containing various forms of nafion proton-conducting polymer

Scanning electron microscopy, atomic force microscopy, and cyclic voltammetry have been used to perform a complex comparative study of the structure of hydrogen fuel cell electrodes consisting of nanostructured platinum on carbon black and electrodes containing a proton-conducting Nafion polymer introduced into the electrode in the form of a solution and in a precoagulated state. It has been shown that, in the latter case, the specific area of electrochemically active platinum increases significantly (by up to two times).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrostatic Spectrograph for Different Ranges of Simultaneously Recorded Energies with a Discrete Combined External Electrode

We propose and study numerically a large-aperture electrostatic spectrograph consisting of the two coaxial electrodes, a cone-cylindrical electrode separated into several segments, and a small cylindrical electrode. The supply voltages providing sharp focusing of charged particle beams in the initial region of the spectrum for different ranges of simultaneously detected energies E{sub max}/E{sub min} = (25–100) are determined. Electron- optical parameters of the spectrograph in four energy ranges are calculated, with the electrical similarity principle being used for charged particles of medium and high energies. The resolution of the spectrograph for medium and high energies, E = (0.1–1)E{sub max}, is equal to (5–3) × 10{sup –3}. For small energies, E = (0.01–0.1)E{sub max}, the resolution worsens and varies within the (0.6–1.6) × 10{sup –2} range as the range of simultaneously recorded energies increases.

43 PARTICLE ACCELERATORS↗

Compact Multichannel Charged-Particle Energy Analyzer Based on a Conical Cut Electrode

An electrostatic compact analyzer for obtaining the energy spectrum and for detecting simultaneously charged particles in a wide energy range, which is especially important for fast processes in various materials, has been proposed and designed. The energy analyzer consists of an outer conical electrode with closed end faces, which is cut into parts and fed in accordance with the law of odd numbers, and an grounded inner electrode on the surface of which charged particle beams with a wide energy range are focused. To increase the sharpness of low-energy beam focusing, an auxiliary, very small conical electrode is introduced. In spite of the small energy dispersion factor, the optimal regime of operation of the proposed analyzer with energy resolution not worse than 1% has been found.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Can Greener Cyrene Replace NMP for Electrode Preparation of NMC 811 Cathodes?

N-methyl-2-pyrrolidone (NMP) is the normally used solvent for cathode processing in lithium battery field. However, its high toxicity attracted more and more environmental scrutiny and was restricted by many chemical legislations in industry applications. So, it is necessary to find a greener and safer alternative to replace it. Dihydrolevoglucosenone (Cyrene), a newly reported green dipolar aprotic solvent, has very similar solvent properties as NMP, making it a very attractive candidate. The possibility to use Cyrene to replace NMP for NMC 811 cathode fabrication was studied. Although PVDF binder has very poor solubility in Cyrene at room temperature, increasing temperature can significantly change this. High temperature (above 80 °C) electrode processing with Cyrene gives promising performance, which is comparable to the conventional NMP fabricated electrode. A proof of principle was provided: Cyrene can be a good green alternative to replace NMP. So, the positive results reported here may also lead to a search for more Cyrene-like green solvents that have a higher solubility for PVDF, or of PVDF-like binders that are more soluble in Cyrene, to help making the electrode processing much greener.

36 MATERIALS SCIENCE↗

Methods—A Practical Approach to the Reversible Hydrogen Electrode Scale

Accurately quantifying applied potential is important to ensuring the comparability, accuracy, and precision of electrochemical studies. Reference electrodes (REs) enable knowledge/determination of the applied potential at electrodes in electrochemical systems. Ultimately, the choice of RE will depend on the particular requirements of a given electrochemical system, however, we note it is imperative to ensure the accuracy of the RE potential and its proper translation to a standardized scale. In this work, we highlight that while there are many commercially available REs, these must be experimentally calibrated to a reliable and practical standard potential scale, for instance the reversible hydrogen electrode (RHE) scale for aqueous systems. With representative data, we provide streamlined instructions on how to calibrate any RE to the RHE scale. We also provide guidance to mitigate and/or avoid possible electrolyte contamination issues arising from REs. Moreover, we offer a step-by-step guide on how to build a practical RHE RE, which may be a suitable and desirable option in certain applications. Our work emphasizes the need for the continuous adoption of standardized reference potential scales and demonstrates the versatility of the RHE scale, particularly in aqueous electrochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Editors’ Choice—Rapid Deactivation Convolutes Electrochemical CO 2 Reduction Selectivity Measurements on Gold Rotating Ring Disk Electrodes

Voltammetric measurements of electrochemical CO 2 reduction reaction (CO 2 RR) selectivity on rotating ring disk electrodes (RRDE) are a rapid and sensitive method for quantifying an electrocatalyst’s selectivity, i.e. faradaic efficiency (FE). This method has been applied to polycrystalline Au electrocatalysts where a Au disk electrode catalyzes both the CO 2 RR and hydrogen evolution reaction while the concentric Au ring electrode selectively senses CO by oxidizing CO back to CO 2 . Such measurements enabled fundamental mechanistic studies but suffer from poor inter-laboratory reproducibility. This work identifies causes of variability in RRDE selectivity measurements by comparing protocols with different electrochemical methods, reagent purities, and glassware cleaning procedures. We observed FE CO decrease by 56% during 5 min chronoamperometry measurements, a phenomenon that is not readily apparent in voltammetric scans due to their dynamic nature. Electroplating of electrolyte impurities onto the disk and ring surfaces were identified as a major contributor to Au deactivation. Additionally, the oxygen reduction reaction may lead to higher disk currents in inadequately purged electrolytes, causing an apparent underestimation of FE CO at low overpotentials. Lastly, we propose operational bounds for CO 2 RR selectivity measurements on Au using the RRDE method and provide suggestions on steps for improving the accuracy of this technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-Invasive Electrode Impedance Estimation for Optimized Charge Profile Parameterization of Lithium-Ion Batteries

This work presents a non-invasive method for parameterizing a physically motivated equivalent circuit model of lithium-ion batteries using operando electrochemical impedance spectroscopy and time-domain data. The proposed model consists exclusively of linear circuit elements, enabling computationally efficient simulation and real-time implementation on battery management system chips. By integrating frequency- and time-domain measurements, the model accurately estimates internal states such as the negative electrode potential, achieving a root mean square error of 12.3 mV during fast charging validation. Parameterization requires only rate tests with sinusoidal perturbations at three different ambient temperatures, making the approach experimentally accessible. The model reveals key insights into battery behavior, including rate-dependent overpotentials primarily governed by charge transfer kinetics at the positive electrode, and temperature-dependent impedance contributions from both charge transfer and solid-state diffusion processes. Validation using reference electrodes confirms the model’s ability to detect lithium plating onset and reproduce impedance behavior across a wide range of operating conditions. The approach enables in situ optimization of fast charging profiles and lays the foundation for future extensions incorporating aging effects and plating dynamics.

25 ENERGY STORAGE↗

Comprehensive Study of the Polarization Behavior of LiFePO 4 Electrodes Based on a Many-Particle Model

The unique polarization behavior of LiFePO 4 electrodes was investigated using mathematical simulations with a many-particle model, which have a non-monotonic potential profile for each LiFePO 4 particle, and analyzed by the active population concept. The present simulations reveal two known polarization behaviors, namely the memory effect and path dependence. Notably, a hitherto unknown polarization behavior, the so-called relaxation-induced polarization (RIP), was also identified. The memory effect requires, at a minimum, a sequential four-step operation. By comparison, RIP is triggered only by a one-step operation, namely a long rest. In effect, the polarization associated with the memory effect and RIP was caused by a reduction of the active particles in the two-phase region via relaxation during a rest. The path-dependence mechanism was attributed to kinetically inhomogeneous reactions for each particle. We further found that narrowing the particle size distribution was an effective means to reduce polarization viz. the memory effect and path dependence of LiFePO 4 electrodes. However, RIP could not be suppressed by narrowing the particle size distribution. Furthermore, a comprehensive understanding of these polarization behaviors with our model provides a more accurate way to estimate the state of charge in Li-ion batteries with LiFePO 4 electrodes.

25 ENERGY STORAGE↗

Agglomerates in Polymer Electrolyte Fuel Cell Electrodes: Part I. Structural Characterization

This two-part study characterizes the structural and transport properties of polymer electrolyte fuel cell (PEFC) cathode catalyst electrode. The agglomerates comprising the electrode are characterized with nano scale resolution X-ray computed tomography (nano-CT). A hybrid reconstruction technique is used to further refine the 3-D agglomerate microstructure and obtain 1-nm voxel resolution of the constituent catalyst, ionomer, carbon support and primary and secondary pore phases. Our analysis of nano-CT data shows that the electrode composition is heterogeneous and the agglomerates have structural heterogeneities in terms of size and composition. There is a strong correlation between the ionomer to carbon weight ratio (I/C) and agglomerate microstructure, suggesting that ionomer plays role in formation of larger agglomerates. With the hybrid reconstructions, we show that ionomer film thickness is spatially non-uniform inside the agglomerate and is strongly dependent on the I/C. Smaller agglomerate size and high I/C are shown to favor the ionomer impregnation. We demonstrate that the majority of the primary pores are smaller than 15 nm for I/C = 0.8 and higher I/C reduces the primary pore size. We also characterize the uniformity of the catalyst distribution and show that the majority of the catalyst is located away from the agglomerate surface.

agglomerate↗