Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Automated Data Collection for Determining Statistical Distributions of Module Power Undergoing Potential-Induced Degradation: Preprint

We propose a method for increasing the frequency of data collection and reducing the time and cost of accelerated lifetime testing of photovoltaic modules undergoing potential-induced degradation (PID). This consists of in-situ measurements of dark current-voltage curves of the modules at elevated stress temperature, their use to determine the maximum power at 25 degrees C standard test conditions (STC), and distribution statistics for determining degradation rates as a function of stress level. The semi-continuous data obtained by this method clearly show degradation curves of the maximum power, including an incubation phase, rates and extent of degradation, precise time to failure, and partial recovery. Stress tests were performed on crystalline silicon modules at 85% relative humidity and 60 degrees C, 72 degrees C, and 85 degrees C. Activation energy for the mean time to failure (1% relative) of 0.85 eV was determined and a mean time to failure of 8,000 h at 25 degrees C and 85% relative humidity is predicted. No clear trend in maximum degradation as a function of stress temperature was observed.

14 SOLAR ENERGY↗

Perturbing engine performance measurements to determine optimal engine control settings

Methods and systems for optimizing a performance of a vehicle engine are provided. The method includes determining an initial value for a first engine control parameter based on one or more detected operating conditions of the vehicle engine, determining a value of an engine performance variable, and artificially perturbing the determined value of the engine performance variable. The initial value for the first engine control parameter is then adjusted based on the perturbed engine performance variable causing the engine performance variable to approach a target engine performance variable. Operation of the vehicle engine is controlled based on the adjusted initial value for the first engine control parameter. These acts are repeated until the engine performance variable approaches the target engine performance variable.

33 ADVANCED PROPULSION SYSTEMS↗

J-R Curve Determination for Disk-shaped Compact Specimens Based on the Normalization Method and Direct Current Potential Drop Technique

Material ductile fracture toughness can be described by J-integral versus crack extension relationship (J-R curve). As a conventional J-R curve measurement method, unloading compliance (UC) becomes impractical in elevated temperature testing due to relaxation of the material and a friction induced back-up shape of the J-R curve. In addition, the UC method may underpredict the crack extension for standard disk-shaped compact (DC(T)) specimens. In order to address these issues, the normalization method and direct current potential drop (DCPD) technique were applied for determining J-R curves at 24 C and 500 C for 0.18T DC(T) specimens made from type 316L stainless steel. For comparison purchase, the UC method was also applied in 24 C tests. The normalization method was able to yield valid J-R curves in all tests. The J-R curves from the DCPD technique need adjustment to account for the potential drop induced by plastic deformation, crack blunting, etc. and after applying a newly-developed DCPD adjustment procedure, the post-adjusted DCPD J-R curves essentially matched J-R curves from the normalization method. In contrast, the UC method underpredicted the crack extension in all tests resulting in substantial deviation in the derived J-R curves manifested by high Jq values than the normalization or DCPD method. Only for tests where the UC method underpredicted the crack extension by a very small value, J-R curves determined by the UC method were similar to those determined by the normalization or DCPD method.

DCPD↗

Ion implantation system and process for ultrasensitive determination of target isotopes

A system and process are disclosed for ultrasensitive determination of target isotopes of analytical interest in a sample. Target isotopes may be implanted in an implant area on a high-purity substrate to pre-concentrate the target isotopes free of contaminants. A known quantity of a tracer isotope may also be implanted. Target isotopes and tracer isotopes may be determined in a mass spectrometer. The present invention provides ultrasensitive determination of target isotopes in the sample.

07 ISOTOPE AND RADIATION SOURCES↗

Thermally determining flow and/or heat load distribution in parallel paths

A method including obtaining calibration data for at least one sub-component in a heat transfer assembly, wherein the calibration data comprises at least one indication of coolant flow rate through the sub-component for a given surface temperature delta of the sub-component and a given heat load into said sub-component, determining a measured heat load into the sub-component, determining a measured surface temperature delta of the sub-component, and determining a coolant flow distribution in a first flow path comprising the sub-component from the calibration data according to the measured heat load and the measured surface temperature delta of the sub-component.

42 ENGINEERING↗

Method, system, and computer-readable medium for determining performance characteristics of an object undergoing one or more arbitrary aging conditions

A method, system, and computer-readable medium are described for characterizing performance loss of an object undergoing an arbitrary aging condition. Baseline aging data may be collected from the object for at least one known baseline aging condition over time, determining baseline multiple sigmoid model parameters from the baseline data, and performance loss of the object may be determined over time through multiple sigmoid model parameters associated with the object undergoing the arbitrary aging condition using a differential deviation-from-baseline approach from the baseline multiple sigmoid model parameters. The system may include an object, monitoring hardware configured to sample performance characteristics of the object, and a processor coupled to the monitoring hardware. The processor is configured to determine performance loss for the arbitrary aging condition from a comparison of the performance characteristics of the object deviating from baseline performance characteristics associated with a baseline aging condition.

97 MATHEMATICS AND COMPUTING↗

Thermally determining flow and/or heat load distribution in parallel paths

A method including obtaining calibration data for at least one sub-component in a heat transfer assembly, wherein the calibration data comprises at least one indication of coolant flow rate through the sub-component for a given surface temperature delta of the sub-component and a given heat load into said sub-component, determining a measured heat load into the sub-component, determining a measured surface temperature delta of the sub-component, and determining a coolant flow distribution in a first flow path comprising the sub-component from the calibration data according to the measured heat load and the measured surface temperature delta of the sub-component.

42 ENGINEERING↗

Radar velocity determination using direction of arrival measurements

The various technologies presented herein relate to utilizing direction of arrival (DOA) data to determine various flight parameters for an aircraft A plurality of radar images (e.g., SAR images) can be analyzed to identify a plurality of pixels in the radar images relating to one or more ground targets. In an embodiment, the plurality of pixels can be selected based upon the pixels exceeding a SNR threshold. The DOA data in conjunction with a measurable Doppler frequency for each pixel can be obtained. Multi-aperture technology enables derivation of an independent measure of DOA to each pixel based on interferometric analysis. This independent measure of DOA enables decoupling of the aircraft velocity from the DOA in a range-Doppler map, thereby enabling determination of a radar velocity. The determined aircraft velocity can be utilized to update an onboard INS, and to keep it aligned, without the need for additional velocity-measuring instrumentation.

47 OTHER INSTRUMENTATION↗

VALIDATION AND DETERMINATION OF SIGNIFICANT SIMULATION PARAMETERS USING THE SMOOTHED PARTICLE HYDRODYNAMIC CODE NEUTRINO

In recent years there has been an increase in flooding concern to nuclear power plants; thus, tools to reduce the cost of mitigation efforts are valuable to industry. Simulating flooding events is achieved through different methods and at varied levels of detail. However, these simulations must be able to match application conditions, which requires code validation as well as knowledge of which parameters affect the accuracy of the simulation. To validate and determine the significant parameters for these tools, a sloshing experiment was conducted at the George Washington University and then simulated with the smoothed particle hydrodynamic code Neutrino. The simulation setup was constructed to match the experiment as closely as possible, and the end-wall pressure results were analysed. The 90% and 50% end-wall pressure bounds were compared along with the pressure impulse. The simulation bounds fell mostly within the experimental bounds, with exceptions in insignificant low-pressure areas, such as at the beginning (~40% difference) and the end of the cycle (~40% difference). Another exception was seen at a point in the peak pressure (~75% difference). The simulated pressure impulse matched the experiments well and was within 10%. Additionally, seven parameters were qualitatively assessed and then investigated to determine their significance. The parameters’ significance was determined by sampling five values across the parameters’ range using the Risk Analysis Virtual Environment, then comparing the average pressure for each run. All seven parameters were identified as having some significance. However, the particle size, interaction-radius to particle-size ratio, and fluid settling seem to have a greater effect due to the larger fluctuation of the results. Now that the significant parameters are identified, further research is being done to quantify the significance of each parameter.

97 MATHEMATICS AND COMPUTING↗

Determining a location and size of a gas source with a spectrometer gas monitor

A process for determining a location and size of a gas source within an area with a spectrometer gas monitor includes: providing the spectrometer gas monitor; performing fence line monitoring of the area with the spectrometer gas monitor; collecting spectroscopic data over multiple open paths around the area with the spectrometer gas monitor; measuring atmospheric conditions along gas inflows and gas outflows of the area; subtracting a background for a selected gas from the spectroscopic data; applying a boundary constraint to the spectroscopic data; determining an atmospheric concentration of air entering the area; applying bootstrapping to the spectroscopic data; applying zero minimum elimination to the spectroscopic data; and producing inversion data from the spectroscopic data to determine the location and size of the gas source within the area.

03 NATURAL GAS↗

The Determination of the Reaction Rates, Water Vapor Permeability, and Activation Energy for Thermal Oxidation of LDPE Films

To understand the mechanism of degradation of plastics under environmental degradation, thermal oxidation of LDPE thin film from a single manufacturer was studied. Oxidation was carried out in a pressure vessel with control at four temperatures( 22,50,70 and 80°C and at 30 and 50psi oxygen pressures. Cup tests were done to determine the permeability of water vapor across the LDPE film at 60, 70, and 90°C. The extent of oxidation was monitored using ATR-FTIR and the carbonyl content calculated from the spectra. Bands centered at 1711 and 1735 cm-1 was determined resulted from the carbonyl stretches. A broad band at 3100-3600cm -1 is attributed to O-H stretching and the fingerprint region (<1400 cm -1 ) shows evidence of C-O stretches. The permeability and carbonyl content to water vapor increased with temperature, oxidation time, and oxygen pressure. We concluded the observed increase to the result of the disruption of the semi-crystalline structure of the film to produce amorphous regions within which the water vapor is more permeable. This study was a step in the direction for determining a reliable model for the degradation and eventual failure of medium-level power cables in nuclear power plants (NPPs).

Munir, Nouman↗

Systems and methods for determining flux distribution

Provided are systems and methods for accurately determining flux distribution in organisms or cells without use of metabolic flux analysis data. The methods include estimating flux distributions in multiple reference strains (variants of a parental strain) using experimentally determined extracellular flux data from the reference strains, and determining a flux distribution for the parental strain from the estimated flux distributions for the reference strains and from experimentally measured extracellular fluxes for the parental strain. The systems are configured for carrying out the methods.

59 BASIC BIOLOGICAL SCIENCES↗

Method and system for determining a geographical location of an unmanned aerial vehicle flown in proximity to a power grid

A method for determining geolocation of a UAV near a power grid includes detecting, via a transceiver, a carrier signal transmitted from a first grid node to identify the node's fixed geolocation. A response signal may be transmitted from a second grid node in response to the carrier signal to identify a fixed geolocation of the second grid node, or the UAV may process the carrier signal. A processor determines time-of-flight of the carrier signal, e.g., using the response signal, and derives the UAV's geolocation using the time-of-flight. Determining time-of-flight may include referencing a lookup table indexed by time-of-arrival at the transceiver of the modulated carrier and response signals. A timestamp may indicate time-of-transmission of the carrier and response signals, respectively. Deriving geolocation may include subtracting time-of-transmission of the response signal from that of the carrier signal. A system includes the processor and transceiver.

Moore, Andrew J.↗

Methods and systems for obtaining reconstructed low-frequency seismic data for determining a subsurface feature

A computer-implemented method for obtaining reconstructed seismic data for determining a subsurface feature, includes: determining an initial training velocity model, training a machine learning model based on first training seismic data and second training seismic data generated from the training velocity model, the first training seismic data corresponding to one or more first frequencies, the second training seismic data corresponding to one or more second frequencies lower than the one or more first frequencies, obtaining, based on measured seismic data and the machine learning model, reconstructed seismic data corresponding to the one or more second frequencies, generating a velocity model based on the measured seismic data, the reconstructed seismic data, and a full waveform inversion (FWI), and when the generated velocity model does not satisfy a preset condition, updating the training velocity model based on the generated velocity model, to obtain updated reconstructed seismic data for determining a subsurface feature.

58 GEOSCIENCES↗

Usefulness of HIF-1 Imaging for Determining Optimal Timing of Combining Bevacizumab and Radiotherapy

Purpose: To study the relationship between the hypoxia-inducible factor-1 (HIF-1) activity level after bevacizumab treatment and the antitumor effects of radiation to determine the optimal combination schedule of bevacizumab with radiotherapy. Methods and Materials: The tumor hypoxia changes induced after bevacizumab treatment were evaluated using optical imaging with a HIF-1-dependent reporter gene using the NCI-H441 human lung adenocarcinoma xenograft model. The combined effects of bevacizumab with radiation were evaluated according to the timing of combination. Results: In vivo imaging experiments revealed that bevacizumab treatment had little effect on intratumoral HIF-1 activity 1 day after bevacizumab treatment, but it dramatically upregulated it thereafter through increases in the hypoxic fractions of the tumors. When bevacizumab treatment was combined with 14 Gy of radiation at 24 h or 72 h after bevacizumab treatment, the former combination delayed, but the latter combination accelerated, tumor growth compared with irradiation alone. Conclusion: These data suggest that an optimal window exists for combining bevacizumab with radiotherapy that determines whether the combination will be beneficial and that the imaging of HIF-1 activity would be useful in determining this window.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Evaluation of Fourier Transform Profilometry for Quantitative Waste Volume Determination under Simulated Hanford Tank Conditions

The Hanford Site is currently in the process of an extensive effort to empty and close its radioactive single-shell and double-shell waste storage tanks. Before this can be accomplished, it is necessary to know how much residual material is left in a given waste tank and the chemical makeup of the residue. The objective of Mississippi State University's Institute for Clean Energy Technology's (ICET) efforts is to develop, fabricate, and deploy inspection tools for the Hanford waste tanks that will (1) be remotely operable; (2) provide quantitative information on the amount of wastes remaining; and (3) provide information on the spatial distribution of chemical and radioactive species of interest. A collaborative arrangement has been established with the Hanford Site to develop probe-based inspection systems for deployment in the waste tanks. ICET is currently developing an in-tank inspection system based on Fourier Transform Profilometry, FTP. FTP is a non-contact, 3-D shape measurement technique. By projecting a fringe pattern onto a target surface and observing its deformation due to surface irregularities from a different view angle, FTP is capable of determining the height (depth) distribution (and hence volume distribution) of the target surface, thus reproducing the profile of the target accurately under a wide variety of conditions. Hence FTP has the potential to be utilized for quantitative determination of residual wastes within Hanford waste tanks. We are conducting a multi-stage performance evaluation of FTP in order to document the accuracy, precision, and operator dependence (minimal) of FTP under conditions similar to those that can be expected to pertain within Hanford waste tanks. The successive stages impose aspects that present increasing difficulty and increasingly more accurate approximations of in-tank environments. In this paper, we report our investigations of the dependence of the analyst upon FTP volume determination results and of the effect of gamma radiation on FTP camera and optical components. (authors)

42 ENGINEERING↗

Mathematically determined scavenger impacts during ozonolysis of oxalic acid waste slurries - 15600

A basic oxidant balance, including the primary chemical reactions associated with ozone, hydroxyl radical generation, scavengers and oxalate decomposition reactions was constructed and used to develop mathematical models to represent both steady state and time dependent changes in ozone concentrations, hydroxyl radical concentrations, scavenger concentrations and oxalate concentrations. Using the results from previous spent 1 wt% oxalic acid decomposition testing, a plot of 1/(oxalate reaction rate ) vs. 1/[C{sub 2}O{sub 4}{sup 2-}]) was used to estimate the initial hydroxyl radical generation values (i.e., g values) at time = 0. These g values are then compared for the different slurries to determine if the changes in g values are consistent with the scavenger dilution between the sequentially created slurries. Also considered as a potential scavenger is the CO{sub 2} arising from the oxalate decomposition. In this case the scavenger concentration and the carbon dioxide concentrations would be the same, and k{sub s2} =k{sub sc}. Since the CO{sub 2} is created from the decomposition of oxalate, a standard equation can be used to compensate for time dependence of [C{sub 2}O{sub 4}{sup 2-}]. Using the results from previous spent 1 wt% oxalic acid decomposition testing, plots of oxalate concentration over time were used to determine time specific g values. The g values are then compared to determine how the values change throughput the oxalate decomposition. Using the results from previous spent 1 wt% oxalic acid decomposition testing, time dependent values are developed for 'k{sub g}/k{sub a}' to show the relative significance of hydroxyl radical reacting with the scavenger vs decomposition of the oxalate. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Selective Determination of Methylmercury Levels in Mercury-Contaminated Topsoils from Oak Ridge, TN - 18163

Mercury (Hg) is a strong neurotoxin that affects the central and peripheral nervous system. Mercury has several organomercury species that bio-accumulate in many different environments. In early 1950's, elemental mercury was used for manufacturing of various components nuclear weapons systems in the Y-12 Security Complex in Oak Ridge, TN. The mercury released to the environment contaminated the facilities, soil, sediment, surface water, and groundwater within the boundaries of the Y-12 Plant and the downstream environment along the East Fork Poplar Creek. Remediation efforts have been made since then to alleviate the amount of mercury contamination that impacts the soil, water and wildlife at the Y-12 complex and surrounding areas. Yet, mercury levels in the water still exceed both the regulatory limits (51 ng/L) and the remediation goal (200 μg/L). Methylmercury (CH{sub 3}Hg) is the most toxic form of mercury that bio-accumulates exponentially compared to other forms of mercury. It is hypothesized that contaminated soils contain significant levels of methylmercury that contributes to contamination in nearby freshwater ecosystems in Y-12 complex. The objective of this study was to develop analytical method for selective determination of CH{sub 3}Hg from mercury-contaminated soils that contained elevated levels of inorganic mercury, Hg(II). Attempts were made to selectively extract CH{sub 3}Hg from spiked template soils via extraction in dilute hydrochloric (HCl) and nitric acids (HNO{sub 3}). The latter performed better than HCl affording quantitative extraction of CH{sub 3}Hg with minimal extraction of Hg(II). Under same circumstance, only about 5% of Hg(II) extracted from the soil matrix. Coprecipitation efforts were made using Bi(III), Fe(III) and La(III) alone and in conjunction with thiourea and L-cysteine. A combination of La(III) + L-cysteine afforded highest elimination of Hg(II) from solutions. Thiourea was not suitable for coprecipitation of Hg(II) as it also precipitated up to 67% of CH{sub 3}Hg from simulated soil solutions. Cold vapor generation (CVG) interfaced to ICP-MS was optimized for selective determination of CH{sub 3}Hg{sup +}. Calibration curves were established with CH{sub 3}Hg standards in La(III) and 0.1% L-cysteine and 5% (v/v) HNO{sub 3} by CVG-ICP-MS. The method was validated by determination of CH{sub 3}Hg in sediment reference material (SQC1238) and Estuarine sediment (ERM - CC580) containing trace levels of CH{sub 3}Hg in Hg(II) matrix. The procedure was applied to floodplain soils from Oak Ridge, TN. Methylmercury levels were in the range of 0.031 to 0.047 μg/g. The results indicated that CH{sub 3}Hg{sup +} levels were substantially lower inorganic Hg(II), still though CH{sub 3}Hg at these levels could be significant source of persistent mercury contamination in freshwater systems. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗