Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRAG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

An assessment of current methods for drag-due-to-lift minimization at supersonic speeds

The estimation and minimization of drag-due-to-lift at supersonic speeds has been examined in this study. Correlations of theory with experimental data are used to assess the applicability and limitations of the linearized theory. The role of leading-edge thrust and the use of twist and camber to develop distributed thrust are also discussed. A semiempirical design and estimation method which takes into account the shortcomings of the linear theory is presented. The use of this method will allow the design of more nearly optimum lifting surfaces and provide an accurate prediction of their level of performance. A preliminary examination is made of the use of an Euler code for estimation of the aerodynamic characteristics of a twisted and cambered wing.

Mann, Michael J.↗

Collision probabilities in the presence of nebular gas drag

We are developing a model to determine what fraction of the planetesimals would have hit a protoplanet on their sunward journey as opposed to having a close approach and passing into an inferior orbit. The model involves direct numerical integration of restricted-three-body orbits using a predictor-corrector integrator. A simple gas drag law with a v(exp 2) dependence was also included in the equations of motion. Runs of 100 to 500 particles were already performed, while some future runs may require several times this number in order to get good impact statistics. All planetesimals start in superior orbits with semi-major axes 5 to 10 R(sub H) from the protoplanets, where R(sub H) is the protoplanet's Hill Sphere radius. The orbit is followed until the planetesimal passed into an inferior orbit at least 10 R(sub H) from the protoplanet. This process typically requires 10(exp 4) to 10(exp 5) orbits.

Kary, David M.↗

Serrated trailing edges for improving lift and drag characteristics of lifting surfaces

An improvement in the lift and drag characteristics of a lifting surface is achieved by attaching a serrated panel to the trailing edge of the lifting surface. The serrations may have a saw-tooth configuration, with a 60 degree included angle between adjacent serrations. The serrations may vary in shape and size over the span-wise length of the lifting surface, and may be positioned at fixed or adjustable deflections relative to the chord of the lifting surface.

Vijgen, Paul M. H. W.↗

High speed transport cruise drag

This report provides scaling laws for the cruise aerodynamics of high speed transport wings based on the results of Navier-Stokes computations. Expressions for the various drag components are found, together with the corresponding values (L/D)(sub m) for various values of the geometric parameter s/l which allow for simple optimization of the wing configurations with respect to the span. It is found that linear theory expressions can be used for this purpose provided the coefficients of these experiments for C(sub D) and (L/D)(sub m) are available using Navier-Stokes results.

Roberts, Leonard↗

Survey and analysis of research on supersonic drag-due-to-lift minimization with recommendations for wing design

A survey of research on drag-due-to-lift minimization at supersonic speeds, including a study of the effectiveness of current design and analysis methods was conducted. The results show that a linearized theory analysis with estimated attainable thrust and vortex force effects can predict with reasonable accuracy the lifting efficiency of flat wings. Significantly better wing performance can be achieved through the use of twist and camber. Although linearized theory methods tend to overestimate the amount of twist and camber required for a given application and provide an overly optimistic performance prediction, these deficiencies can be overcome by implementation of recently developed empirical corrections. Numerous examples of the correlation of experiment and theory are presented to demonstrate the applicability and limitations of linearized theory methods with and without empirical corrections. The use of an Euler code for the estimation of aerodynamic characteristics of a twisted and cambered wing and its application to design by iteration are discussed.

Carlson, Harry W.↗

Computation of H2/air reacting flowfields in drag-reduction external combustion

Numerical simulation and analysis of the solution are presented for a laminar reacting flowfield of air and hydrogen in the case of an external combustion employed to reduce base drag in hypersonic vehicles operating at transonic speeds. The flowfield consists of a transonic air stream at a Mach number of 1.26, and a sonic transverse hydrogen injection along a row of 26 orifices. Self-sustained combustion is computed over an expansion ramp downstream of the injection and a flameholder, using the recently developed RPLUS code. Measured data is available only for surface pressure distributions, and is used for validation of the code in practical 3D reacting flowfields. Pressure comparison shows generally good agreements and the main effects of combustion are also qualitatively consistent with experiment.

Lai, H. T.↗

Computation of H2/air reacting flowfields in drag-reduction external combustion

Numerical simulation and analysis of the solution are presented for a laminar reacting flowfield of air and hydrogen in the case of external combustion employed to reduce base drag in hypersonic vehicles operating at transonic speeds. The flowfield consists of a transonic air stream at a Mach number of 1.26 and a sonic transverse hydrogen injection along a row of 26 orifices. Self-sustained combustion is computed over an expansion ramp downstream of the injection and a flameholder, using the recently developed RPLUS code. Measured data is available only for surface pressure distributions and is used for validation of the code in practical 3D reacting flowfields. Pressure comparison shows generally good agreements, and the main effects of combustion are also qualitatively consistent with experiment.

Lai, H. T.↗

Determination of balloon gas mass and revised estimates of drag and virtual mass coefficients

In support of the NASA Balloon Program, small-scale balloons were flown with varying lifting gas and total system mass. Instrument packages were developed to measure and record acceleration and temperature data during these tests. Top fitting and instrument payload accelerations were measured from launch to steady state ascent and through ballast drop transients. The development of the small lightweight self-powered Stowaway Special instrument packages is discussed along with mathematical models developed to determine gas mass, drag and virtual mass coefficients.

Robbins, E.↗

Computational analysis of methods for reduction of induced drag

The purpose of this effort was to perform a computational flow analysis of a design concept centered around induced drag reduction and tip-vortex energy recovery. The flow model solves the unsteady three-dimensional Euler equations, discretized as a finite-volume method, utilizing a high-resolution approximate Riemann solver for cell interface flux definitions. The numerical scheme is an approximately-factored block LU implicit Newton iterative-refinement method. Multiblock domain decomposition is used to partition the field into an ordered arrangement of blocks. Three configurations are analyzed: a baseline fuselage-wing, a fuselage-wing-nacelle, and a fuselage-wing-nacelle-propfan. Aerodynamic force coefficients, propfan performance coefficients, and flowfield maps are used to qualitatively access design efficacy. Where appropriate, comparisons are made with available experimental data.

Janus, J. M.↗

Roughness of Weddell Sea ice and estimates of the air-ice drag coefficient

Snow surface, ice surface, and ice underside roughness computed from 47 surface elevation profiles collected during a transect of the Weddell Sea are reported. Roughness spectra for all three surfaces and for both deformed and undeformed ice roll off roughly as k exp -1 when the wavenumber k is between 0.1 and 3 rad/m. The snow surface and underside spectra roll off somewhat faster than k exp -1, and the ice surface spectra roll off somewhat slower than k exp -1. It is argued that the excess spectral intensity at high wavenumbers in the Antarctic ice surface spectra results from the small-scale roughness that the ice sheet had on consolidation. The snow surface spectra are used to compute a roughness scale that parameterizes the air-ice momentum coupling and makes it possible to estimate the neutral stability drag coefficient referenced to a height of 10 m, C sub DN10. Typical C sub DN10 values are 1.1-1.4 x 10 exp -3 over undeformed ice and 1.3-1.8 x 10 exp -3 over deformed ice.

Andreas, Edgar L.↗

Full scale determination of the lift and drag of a seaplane

The speed, barometric pressure, and number of revolutions of the engine of a seaplane were measured, including tests with stopped engine. The mean data obtained are given in the following note; the results of the gliding tests are used for the computation of the lift and drag coefficients, and by making use of them the results of the engine flights are used for the computation of the propeller efficiency.

Munk, Max M↗

Determination of the lift and drag characteristics of an airplane in flight

Flight tests to determine lift and drag characteristics are discussed. A review is given of the fundamental principles on which the tests are based and on the forces acting on an airplane in the various conditions of steady flight. Glide with and without propeller thrust and the relation between angle of attack and the indicated airspeed for different conditions of steady flight are discussed. The glide test procedure and the problem of the propeller are discussed.

Green, Maurice W↗

Note on the Katzmayr effect on airfoil drag

The reduction of drag of an airfoil when the air stream is oscillating is called the Katzmayr effect. The purpose here is to offer a simple explanation of the cause of the Katzmayr effect.

Ober, Shatswell↗

Lift and drag characteristics of a cabin monoplane

The results of flight tests conducted by the NACA to determine the lift and drag characteristics of a full-scale airplane are given herein. A Fairchild FC-2W2 cabin monoplane having a Gottingen 387 wing section was used for the tests. The maximum lift coefficient for the airplane is compared with that obtained for the Gottingen 387 airfoil in recent tests in the Variable Density Tunnel. The maximum lift coefficient for the airplane was found to be 1.50 and that for the airfoil 1.56. Although the flight tests were confined chiefly to glides with the propeller locked horizontally, data obtained with the propeller operating at zero thrust for a few angles of attack are also included.

Thompson, F L↗

Full Scale Investigation of the Drag of a Wing Radiator

Tests were made on the 1927 Williams racer in order to determine the effect of the wing radiator on the airfoil characteristics. It was found that the radiator doubled the minimum drag of the portion of the wing it covered, and also reduced the lift somewhat.

Weick, Fred E↗