Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Color”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

An evaluation of Skylab (EREP) remote sensing techniques applied to investigations of crustal structure

The author has identified the following significant results. Film positives (70mm) from all six S190A multispectral photographic camera stations for any one scene can be registered and analyzed in a color additive viewer. Using a multispectral viewer, S190A and B films can be projected directly onto published geologic and topographic maps at scales as large as 1:62,500 and 1:24,000 without significant loss of detail. S190A films and prints permit the detection of faults, fractures, and other linear features not visible in any other space imagery. S192 MSS imagery can be useful for rock-type discrimination studies and delineation of linear patterns and arcuate anomalies. Anomalous color reflectances and arcuate color patterns revealed mineralized zones, copper deposits, vegetation, and volcanic rocks in various locations such as Panamint Range (CA), Greenwater (Death Valley), Lava Mountains (CA), northwestern Arizona, and Coso Hot Springs (CA).

Bechtold, I. C.↗

Detection and mapping of mineralized areas in the Cortez-Uinta Belt, Utah-Nevada, using computer-enhanced ERTS imagery

The author has identified the following significant results. Mineralogical differences between hydrothermally altered rocks and most unaltered rocks in south central Nevada cause visible and near infrared (0.45-2.4 micron) spectral reflectance differences which can be used to discriminate broad categories of rocks in multispectral images. The most important mineralogical differences are the increased abundance of goethite, hematite, jarosite, alunite, montmorillonite, and kaolinite in the altered zones. Because of the wavelength positions and widths of the LANDSAT MSS bands, these spectral differences are not apparent in individual or color infrared composite MSS images. The technique developed to enhance these subtle spectral differences combines ratioing of the MSS bands and contrast stretching. Field evaluation of color-ratio composite shows that, after exclusion of alluvial areas, approximately 80% of the green and brown color patterns are related to hydrothermal alteration. The remaining 20% consists mainly of pink hematitic crystallized tuff and tan or red ferruginous shale and siltstone.

Rowan, L. C.↗

The identification of selected vegetation types in Arizona through the photointerpretation of intermediate scale aerial photography

The author has identified the following significant results. Nine photography interpretation tests were performed with a total of 19 different interpreters. Three tests were conducted with black and white intermediate scale photography and six tests with color infrared intermediate scale photography. The black and white test results show that the interpretation of vegetation mapped at the association level of classification is reliable for all the classes used at 61%. The color infrared tests indicate that the association level of mapping is unsatisfactory for vegetation interpretation of classes 1 and 6. Students' t-test indicated that intermediate scale black and white photography is significantly better than this particular color infrared photography for the interpretation of southeastern Arizona vegetation mapped at the association level.

Ross, G. F.↗

Digitizing zone maps, using modified LARSYS program

A method for digitizing zone maps is presented, starting with colored images and producing a final one-channel digitized tape. This method automates the work previously done interactively on the Image-100 and Data Analysis System computers of the Johnson Space Center (JSC) Earth Observations Division (EOD). A color-coded map was digitized through color filters on a scanner to form a digital tape in LARSYS-2 or JSC Universal format. The taped image was classified by the EOD LARSYS program on the basis of training fields included in the image. Numerical values were assigned to all pixels in a given class, and the resulting coded zone map was written on a LARSYS or Universal tape. A unique spatial filter option permitted zones to be made homogeneous and edges of zones to be abrupt transitions from one zone to the next. A zoom option allowed the output image to have arbitrary dimensions in terms of number of lines and number of samples on a line. Printouts of the computer program are given and the images that were digitized are shown.

Giddings, L.↗

In situ spectroradiometric calibration of EREP imagery and estuarine and coastal oceanography of Block Island sound and adjacent New York coastal waters

The author has identified the following significant results. The first part of the study resulted in photographic procedures for making multispectral positive images which greatly enhance the color differences in land detail using an additive color viewer. An additive color analysis of the geologic features near Willcox, Arizona using enhanced black and white multispectral positives allowed compilation of a significant number of unmapped geologic units which do not appear on geologic maps of the area. The second part demonstrated the feasibility of utilizing Skylab remote sensor data to monitor and manage the coastal environment by relating physical, chemical, and biological ship sampled data to S190A, S190B, and S192 image characteristics. Photographic reprocessing techniques were developed which greatly enhanced subtle low brightness water detail. Using these photographic contrast-stretch techniques, two water masses having an extinction coefficient difference of only 0.07 measured simultaneously with the acquisition of S190A data were readily differentiated.

Yost, E. F.↗

A photometric study of the Orion OB 1 association. 2: Photometric analysis

The procedures adopted for analysis of photometric data in terms of color excesses, intrinsic color indexes, absolute visual magnitudes, and rotational-velocity effects are discussed in detail for Orion association B-, intermediate (I)-, and AF-type stars. The effects of the nebular environment and a comparison of various calibrations of Balmer-line and four-color indexes are considered for the determination of individual absolute magnitudes for B-type stars. When absolute magnitudes of stars in the region of the Orion Nebula are determined from the beta index, emission mechanisms appear to spuriously brighten them. A detailed comparison of absolute magnitudes derived from Balmer-line indexes and MK spectral-type calibrations is presented. The data are also examined with regard to the effects of polarization and infrared excesses. The results suggest a complex combination of intracluster and circumstellar origins for these processes.

Warren, W. H., Jr.↗

Investigation of environmental change pattern in Japan. Investigation of variations in the prominent oceanic current, Kuroshio

The author has identified the following significant results. Conspicuous results of composed color images were realized in the ground patterns, such as the fine meander of the Tenryu River. No significant difference was found between single band color image and multiband composed color image in the sea area. It was found that MSS was more advantageous for land than for sea; only band 4 shows dominant features in the sea.

Maruyasu, T.↗

Skylab experiment SO73: Gegenschein/zodiacal light

A 10 color photoelectric polarimeter was used to measure the surface brightness and polarization associated with zodiacal light, background starlight, and spacecraft corona during each of the Skylab missions. Fixed position and sky scanning observations were obtained during Skylab missions SL-2 and SL-3 at 10 wavelenghts between 4000A and 8200A. Initial results from the fixed-position data are presented on the spacecraft corona and on the polarized brightness of the zodiacal light. Included among the fixed position regions that were observed are the north celestial pole, south ecliptic pole, two regions near the north galactic pole, and 90 deg from the sun in the ecliptic. The polarized brightness of the zodiacal light was found to have the color of the sun at each of these positions. Because previous observations found the total brightness to have the color of the sun from the near ultraviolet out to 2.4 micrometers, the degree of polarization of the zodiacal light is independent of wavelength from 4000A to 8200A.

Weinberg, J. L.↗

UBV photometry of Iapetus - Results from five apparitions

Measurements of the brightness and B-V color index of the leading and trailing hemispheres of Iapetus during the past five apparitions of Saturn are presented. The dependence of brightness on solar phase angle is determined for the two faces of the satellite. After correction for solar phase angle and distance effects, the brighter trailing hemisphere of Iapetus was found to be constant in brightness and color index throughout the interval covered by the observations. The brightness of the dark leading hemisphere, however, decreased by about 0.2 mag over the same period, and its B-V color index reddened by 0.05 mag. These changes are interpreted as evidence for the existence of a bright southern pole cap on Iapetus.

Millis, R. L.↗

UBV photometry of small and distant asteroids

Photoelectric magnitudes and colors on the ultraviolet (UBV) system are presented for 65 minor planets, including four Mars crossers, six Trojans, and main-belt objects down to 6 km in diameter. The Trojans all have very similar colors not characteristic of the main-belt population. A paucity of S-type asteroids at the smallest diameters, predicted from trends seen at larger sizes, is not observed. The newly available color data for small objects ranging from 1.0 to 5.2 astronomic units in heliocentric distance show the main belt to be a transition zone between predominantly silicate and carbonaceous compositions.

Zellner, B.↗

Land classification of south-central Iowa from computer enhanced images

The author has identified the following significant results. The Iowa Geological Survey developed its own capability for producing color products from digitally enhanced LANDSAT data. Research showed that efficient production of enhanced images required full utilization of both computer and photographic enhancement procedures. The 29 August 1972 photo-optically enhanced color composite was more easily interpreted for land classification purposes than standard color composites.

Lucas, J. R.↗

Reducing LANDSAT data to parameters with physical significance and signature extension: A view of LANDSAT capabilities

The premise is the LANDSAT is capable of sensing only a few physical parameters. Much of the contrast provided in LANDSAT data is provided by differences in vegetation cover. Although dominant, vegetation is not the only physical parameter that can be detected with LANDSAT; a ratio of MSS Channel 5 to MSS Channel 4 (R5,4), two visible channels, separates materials by color hue. Additional information is attained by the addition of MSS channels 5 and 4 to approximate brightness, permitting separation of materials by color value. Other spectral combinations may provide correlations with these physical parameters or new ones. An iron absorption in the infrared can also be recognized in LANDSAT data when iron content is present in sufficient percentages, Although by color, limonite-rich soils are distinctive as bright yellow, they are not unique in the R5,4. A fairly strong iron absorption is present in the infrared band MSS Channel 7 for these soils, although the wideband configuration of LANDSAT is not optimal for its enhancement and the effects of vegetation often obscure it.

Salmon-Drexler, B. C.↗

Assessment of forest plantations from low altitude aerial photography

Vertical color, and color-infrared, aerial photography obtained from altitudes between 183 m and 915 m provide a cost effective method of determining tree survival and height growth in pine plantations on the North Carolina Coastal Plain. All interpretations were performed by professional forestry personnel from the original 70 mm color transparencies. Prompt assessment of tree survival is necessary if failed spots are to be successfully replanted. Counts of living trees made after the third growing season, and sometimes only two growing seasons after planting, are accurate enough to permit planning of replanting operations without extensive ground surveys.

Nelson, H. A.↗

Three approaches to the classification of inland wetlands

In the Dismal Swamp project, seasonal, color-infrared aerial photographs and LANDSAT digital data were interpreted for a detailed analysis of the vegetative communities in a large, highly altered wetland. In Western Tennessee, seasonal high altitude color-infrared aerial photographs provided the hydrologic and vegetative information needed to map inland wetlands, using a classification system developed for the Tennessee Valley Region. In Florida, color-infrared aerial photographs were analyzed to produce wetland maps using three existing classification systems to evaluate the information content and mappability of each system. The methods used in each of the three projects can be extended or modified for use in the mapping of inland wetlands in other parts of the United States.

Gammon, P. T.↗

Optical data processing and projected applications of the ERTS-1 imagery covering the 1973 Mississippi River Valley floods

Flooding was detected along the Mississippi River and some of its tributaries by the multispectral scanner (MSS) on the ERTS-1 on at least three orbits during the spring of 1973. The ERTS data provided the first opportunity for mapping the regional extent of flooding. Special optical data processing techniques were used to produce a variety of multispectral color composites enhancing flood-plain details. One of these, a 2-color composite of near infrared bands 6 and 7, was enlarged and registered to 1:250,000-scale topographic maps and used as the basis for preparation of flood image maps. Two specifically filtered 3-color composites of MSS bands 5,6, and 7 and 4, 5, and 7 were prepared.

Deutsch, M.↗

Photometric studies of composite stellar systems. I - CO and JHK observations of E and S0 galaxies

Multiaperture infrared photometric observations of the central regions of 51 early-type galaxies and of the integrated light of five globular clusters are presented. These data are compared with selected optical observations and with various model predictions. The main results of the work are: (1) the observed parameters for the brighter galaxies, particularly the CO index and the V-K color, agree with the predictions of stellar synthesis models characterized by giant-dominated populations with mass/visual luminosity ratios less than 10; (2) the galaxian broad-band colors tend to redden with increasing luminosity and decreasing aperture size; (3) for the globular clusters, there is evidence that the integrated colors become redder with increasing metallicity; and (4) in bright galaxies the relative changes of U-V, V-J, and J-K as functions of radius may differ from the relative changes as functions of luminosity at a fixed radius.

Frogel, J. A.↗

Biocontamination and particulate detection system

A method for determining the characteristics and amount of microscopic contaminants lodged on a photographed surface is disclosed. An image enhanced full color photographic negative and print are taken of the contaminated surface. Three black and white prints are developed subsequently from red, green and blue separation filter overlays of the color negative. Both the color and three monochromatic prints are then scanned to extract in digital form a profile of any contaminant possibly existing on the surface. The resulting profiles are electronically analyzed and compared with data already stored relating to known contaminants.

Jacobs, J. M.↗

A method of determining spectral analytical dye densities

A straightforward method for the user of color imagery to determine the spectral analytical density of dyes present in the processed imagery is presented. The method involves exposing a large number of different color patches on the film which span the gamut of the film's imaging capabilities. From integral spectral density measurements at 16 to 19 different wavelengths, the unit spectral dye curves for each of the three dyes present were determined in two different types of color films. A discussion of the use of these spectral dye densities to determine the transformation between integral density measurements and analytical density is presented.

Scarpace, F. L.↗