Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMFORT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

GTARG - The TOPEX/Poseidon ground track maintenance maneuver targeting program

GTARG is a computer program used to design orbit maintenance maneuvers for the TOPEX/Poseidon satellite. These maneuvers ensure that the ground track is kept within +/-1 km with of an = 9.9 day exact repeat pattern. Maneuver parameters are determined using either of two targeting strategies: longitude targeting, which maximizes the time between maneuvers, and time targeting, in which maneuvers are targeted to occur at specific intervals. The GTARG algorithm propagates nonsingular mean elements, taking into account anticipated error sigma's in orbit determination, Delta v execution, drag prediction and Delta v quantization. A satellite unique drag model is used which incorporates an approximate mean orbital Jacchia-Roberts atmosphere and a variable mean area model. Maneuver Delta v magnitudes are targeted to precisely maintain either the unbiased ground track itself, or a comfortable (3 sigma) error envelope about the unbiased ground track.

Shapiro, Bruce E.↗

Cycler orbit between Earth and Mars

A periodic orbit between Earth and Mars has been discovered that, after launch, permits a space vehicle to cycle back and forth between the planets with moderate maneuvers at irregular intervals. A Space Station placed in this cycler orbit could provide a safe haven from radiation and comfortable living quarters for astronauts en route to Earth or Mars. The orbit is largely maintained by gravity assist from Earth. Numerical results from multiconic optimization software are presented for a 15-year period from 1995 through 2010.

Byrnes, Dennis V.↗

Metabolic responses to simulated extravehicular activity

Automatic control of the liquid cooling garment (LCG) worn by astronauts during extravehicular activity (EVA) would more efficiently regulate astronaut thermal comfort and improve astronaut productivity. An experiment was conducted in which subjects performed exercise profiles on a unique, supine upper body ergometer to elicit physiological and thermal responses similar to those achieved during zero-g EVAs. Results were analyzed to quantify metabolic rate, various body temperatures, and other heat balance parameters. Such data may lead to development of a microprocessor-based system to automatically maintain astronaut heat balance during extended EVAs.

Williamson, Rebecca C.↗

EVA results of Shuttle Mission STS-37

The paper summarizes EVA results of the STS-37 mission that flew in April 1991, with emphasis on the unscheduled EVA to free the Compton GRO antenna. The EVA Development Flight Experiment (EDFE) objectives and equipment description are also presented. The EDFE consisted of three experiments conducted during STS-37 to evaluate both designs of crew translation equipment and loads imparted by crew members while performing typical EVA work site tasks for Space Station Freedom. The experiments were used to evaluate static and dynamic loads and ease of operation of four separate translation systems operating on a fixed track. Various measures of performance of the crew equipment and translation aids are discussed. The rates and accelerations experienced during translation aided by the manipulator foot restraint and remote manipulator system were found to be comfortable.

Whitsett, C. E.↗

CAMELOT 2: Personnel transport between Earth and Mars

A summary of the second phase of a design study fo a cycling spacecraft for regular and frequency personnel transport between Earth and a Mars base is presented. The first-phase study, called project CAMELOT, was a mission analysis and configuration design and was completed by the Space Systems Design class at the University of Michigan in the winter term, 1987. In the second phase, the configuration and component design has been developed by the Space Systems Design class in the winter term, 1988, beyond the initial configuration study. Analysis has led to numerous design modifications and improvements, as well as providing more detailed system definition. Major components of the second phase study include innovative detailed designs such as an interface between the rotating and non-rotating portions of the spacecraft, an elevator system that changes orientation to eliminate Coriolis forces, an electromagnetic radiation shield that significantly reduces the mass of the spacecraft, and a detailed assembly sequence and cost analysis. In addition, modifications to the propulsion and the power generation subsystems, taxi-docking facilities, and internal layout design have led to a more efficient, more reliable, and more comfortable vehicle. Finite-element stress and dynamic analysis has verified much of the system and indicates the validity of the design. Computer simulation of many moving components, including torus rotation, elevator and interface operations, and attitude control mechanisms further validate and support the various systems.

Source record↗

Report on the general design of commercial aircraft

Given here are evaluations of six different European aircraft from the point of view of a passenger. The aircraft discussed are the DH 34, the Handley-Page W8B, the Farman Goliath, the Potez IX, the Spad 33 (Berline), and the Fokker F.III. The airplanes were evaluated with regard to seating comfort, ventilation, noise, seating arrangements, cabin doors, baggage accommodation, interior arrangement of cabins, pilot's position and communication with the pilot, pilot accommodations, view from the cabin, safety, and lavatory accommodations.

Warner, Edward P↗

Commercial airplanes and seaplanes

This report considers as the dominating characteristic, either the load carried, the speed, the radius of action, the fuel consumption, the activity of transport, or, lastly, the qualities of comfort and safety. The first four factors determine the theoretical efficiency, while the others determine its practical efficiency.

AIRPLANES - DESIGN↗

Technical problems of commercial flying

The technical requirements for commercial aircraft are listed, which include: safety, economy and comfort. The author lists various methods to increase these requirements in commercial aircraft.

Warner, Edward P↗

Initial results of a flight investigation of the wing and tail loads on an airplane equipped with a vane-controlled gust-alleviation system

Results are given of an analysis of wing and horizontal-tail spar strains measured on a twin-engine light transport airplane which was modified for the installation of a control system to alleviate airplane motions in turbulent air and thus improve passenger comfort. From a sample of the measurements obtained in flight through clear-air turbulence, normal acceleration at the airplane center of gravity was reduced 43 percent, wing main-spar bending strains were reduced, and wing-spar shear strains were increased. Horizontal-tail shear and bending strains were increased. Measurements of aerodynamic loads obtained in a pull-up with the gust-alleviation system in operation are also presented.

LOADS AND STRESSES, STRUCTURAL - DYNAMIC↗

Area-Suction Boundary-Layer Control as Applied to the Trailing-Edge Flaps of a 35 Degree Swept-Wing Airplane

A wind-tunnel investigation was made to determine the effects on the aerodynamic characteristics of a 35 degree swept-wing airplane of applying area-suction boundary-layer control to the trailing-edge flaps. Flight tests of a similar airplane were then conducted to determine the effect of boundary-layer control in the handling qualities and operation of the airplane, particularly during landing. The wind-tunnel and flight tests indicated that area suction applied to the trailing-edge flaps produced significant increases in flap lift increment. Although the flap boundary-layer control reduced the stall speed only slightly, a reduction in minimum comfortable approach speed of about 12 knots was obtained.

Cook, Woodrow L↗

Measurements of Free-Space Oscillating Pressures Near Propellers at Flight Mach Numbers to 0.72

In the course of a short flight program initiated to check the theory of Garrick and Watkins (NACA rep. 1198), a series of measurements at three stations were made of the oscillating pressures near a tapered-blade plan-form propeller and rectangular-blade plan form propeller at flight Mach numbers up to 0.72. In contradiction to the results for the propeller studied in NACA rep. 1198, the oscillating pressures in the plane ahead of the propeller were found to be higher than those immediately behind the propeller. Factors such as variation in torque and thrust distribution, since the blades of the present investigation were operating above their design forward speed, may account for this contradiction. The effect of blade plan form shows that a tapered-blade plan-form propeller will produce lower sound-pressure levels than a rectangular-blade plan-form propeller for the low blade-passage harmonics (the frequencies where structural considerations are important) and produce higher sound-pressure levels for the higher blade-passage harmonics (frequencies where passenger comfort is important).

Kurbjun, Max C↗

Rolling-Convolute Joint For Pressurized Glove

Rolling-convolute metacarpal/finger joint enhances mobility and flexibility of pressurized glove. Intended for use in space suit to increase dexterity and decrease wearer's fatigue. Also useful in diving suits and other pressurized protective garments. Two ring elements plus bladder constitute rolling-convolute joint balancing torques caused by internal pressurization of glove. Provides comfortable grasp of various pieces of equipment.

Kosmo, Joseph J.↗

Fully Three-Dimensional Virtual-Reality System

Proposed virtual-reality system presents visual displays to simulate free flight in three-dimensional space. System, virtual space pod, is testbed for control and navigation schemes. Unlike most virtual-reality systems, virtual space pod would not depend for orientation on ground plane, which hinders free flight in three dimensions. Space pod provides comfortable seating, convenient controls, and dynamic virtual-space images for virtual traveler. Controls include buttons plus joysticks with six degrees of freedom.

Beckman, Brian C.↗

Low-Noise Spiral Bevel Gears

Modified spiral bevel gears that generate relatively little noise and vibration designed and fabricated for use in U.S. Army OH-58D helicopter. Noise reduced by 12 to 19 dB. Similar low-noise, low-vibration spiral bevel gears used in other helicopters, with consequent benefits in comfort and health of pilots and passengers, enhancement of pilots' performance and safety through reduction of audible distraction, and reduction in cost and weight of helicopters through reduction in amount of sound-proofing material. Low-noise, low-vibration spiral bevel gears also used in drive axles of cars and trucks for smoother, quieter rides.

Lewicki, David G.↗

Camelot 3: Habitability criteria space research and design studio

Acknowledging the importance of human beings on a mission to Mars, the University of Puerto Rico studied both psychological and physiological aspects. Different conditions necessary for human health and well-being were considered. As a result, habitability criteria were developed. The criteria are as follows: personal identification; social interaction; unpredictable conditions; contact with nature; mental landscapes; privacy; equalitarian conditions; variety; functionality; sensory stimulation; music and environmental sound; stability and security; comfort; and sense of orientation.

Arroyo, F.↗