Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BEAM LINES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

MO-F-16A-02: Simulation of a Medical Linear Accelerator for Teaching Purposes

Purpose: Detailed functioning of linear accelerator physics is well known. Less well developed is the basic understanding of how the adjustment of the linear accelerator's electrical components affects the resulting radiation beam. Other than the text by Karzmark, there is very little literature devoted to the practical understanding of linear accelerator functionality targeted at the radiotherapy clinic level. The purpose of this work is to describe a simulation environment for medical linear accelerators with the purpose of teaching linear accelerator physics. Methods: Varian type lineacs were simulated. Klystron saturation and peak output were modelled analytically. The energy gain of an electron beam was modelled using load line expressions. The bending magnet was assumed to be a perfect solenoid whose pass through energy varied linearly with solenoid current. The dose rate calculated at depth in water was assumed to be a simple function of the target's beam current. The flattening filter was modelled as an attenuator with conical shape, and the time-averaged dose rate at a depth in water was determined by calculating kerma. Results: Fifteen analytical models were combined into a single model called SIMAC. Performance was verified systematically by adjusting typical linac control parameters. Increasing klystron pulse voltage increased dose rate to a peak, which then decreased as the beam energy was further increased due to the fixed pass through energy of the bending magnet. Increasing accelerator beam current leads to a higher dose per pulse. However, the energy of the electron beam decreases due to beam loading and so the dose rate eventually maximizes and the decreases as beam current was further increased. Conclusion: SIMAC can realistically simulate the functionality of a linear accelerator. It is expected to have value as a teaching tool for both medical physicists and linear accelerator service personnel.

43 PARTICLE ACCELERATORS↗

An ultra-compact and low loss passive beam-forming network integrated on chip with off chip linear array

The work here presents a review of beam forming architectures. As an example, the author presents an 8x8 Butler Matrix passive beam forming network including the schematic, design/modeling, operation, and simulated results. The limiting factor in traditional beam formers has been the large size dictated by transmission line based couplers. By replacing these couplers with transformer-based couplers, the matrix size is reduced substantially allowing for on chip compact integration. In the example presented, the core area, including the antenna crossover, measures 0.82mm×0.39mm (0.48% the size of a branch line coupler at the same frequency). The simulated beam forming achieves a peak PNR of 17.1 dB and 15dB from 57 to 63GHz. At the 60GHz center frequency the average insertion loss is simulated to be 3.26dB. The 8x8 Butler Matrix feeds into an 8-element antenna array to show the array patterns with single beam and adjacent beam isolation.

43 PARTICLE ACCELERATORS↗

Beam Transport and Diagnostics for the NSLS-II Injection System

The NSLS-II is a state of the art 3 GeV synchrotron light source being developed at BNL. The injection system will consist of a 200 MeV linac, 3 GeV booster synchrotron, and associated transfer lines. The transport lines between the linac and booster (LtB) and the booster and storage ring (BSR) must satisfy a number of requirements. In addition to transporting the beam while maintaining the beam emittance, these lines must allow for commissioning, provide appropriate diagnostics, allow for the appropriate safety devices and in the case of the BSR line, provide a stable beam for top off injection. Appropriate diagnostics are also necessary in the linac and booster to complement the measurements in the transfer lines and to allow for fast commissioning. In this paper we discuss the design of the transfer lines for the NSLSII along with the incorporated diagnostics and safety systems. Necessary diagnostics in the linac and booster are also discussed.

43 PARTICLE ACCELERATORS↗

Characterization of Second Harmonic Afterburner Radiation at the LCLS

During commissioning of the Linac Coherent Light Source (LCLS) x-ray Free Electron Laser (FEL) at the SLAC National Accelerator Laboratory it was shown that saturation lengths much shorter than the installed length of the undulator line can routinely be achieved. This frees undulator segments that can be used to provide enhanced spectral properties and at the same time, test the concept of FEL Afterburners. In December 2009 a project was initiated to convert undulator segments at the down-beam end of the undulator line into Second Harmonic Afterburners (SHAB) to enhance LCLS radiation levels in the 10-20 keV energy range. This is being accomplished by replacement of gap-shims increasing the fixed gaps from 6.8 mm to 9.9 mm, which reduces their K values from 3.50 to 2.25 and makes the segments resonant at the second harmonic of the upstream unmodified undulators. This paper reports experimental results of the commissioning of the SHAB extension to LCLS.

43 PARTICLE ACCELERATORS↗

Observation of Skewed Electromagnetic Wakefields in an Asymmetric Structure Driven by Flat Electron Bunches

Relativistic charged -particle beams that generate intense longitudinal fields in accelerating structures also inherently couple to transverse modes. The effects of this coupling may lead to beam breakup instability and thus must be countered to preserve beam quality in applications such as linear colliders. Beams with highly asymmetric transverse sizes (flat beams) have been shown to suppress the initial instability in slab -symmetric structures. However, as the coupling to transverse modes remains, this solution serves only to delay instability. In order to understand the hazards of transverse coupling in such a case, we describe here an experiment characterizing the transverse effects on a flat beam, traversing near a planar dielectric lined structure. Further, the measurements reveal the emergence of a previously unobserved skew-quadrupolelike interaction when the beam is canted transversely, which is not present when the flat beam travels parallel to the dielectric surface. We deploy a multipole field fitting algorithm to reconstruct the projected transverse wakefields from the data. We generate the effective kick vector map using a simple two -particle theoretical model, with particle -in -cell simulations used to provide further insight for realistic particle distributions.

43 PARTICLE ACCELERATORS↗

High-frequency instability of the sheath-plasma resonance

Coherent high-frequency oscillations near the electron plasma frequency are generated by electrodes with positive dc bias immersed in a uniform Maxwellian afterglow plasma. The instability occurs at the sheath-plasma resonance and is driven by a negative RF sheath resistance associated with the electron inertia in the diodelike electron-rich sheath. With increasing dc bias, i.e., electron transit time, the instability exhibits a hard threshold, downward frequency pulling, line broadening, and copious harmonics. The fundamental instability is a bounded oscillation caused by wave evanescence, but the harmonics are radiated as electromagnetic waves from the electrodes acting like antennas. Wavelength and polarization measurements confirm the emission process. Electromagnetic waves are excited by electrodes of various geometries (planes, cylinders, spheres), which excludes other radiation mechanisms such as orbitrons or beam-plasma instabilities. The line-broadening mechanism has been identified as a frequency modulation via the electron transit time by dynamic ions. Ion oscillations at the sheath edge give rise to burstlike RF emissions. These laboratory observations of a new instability are important for antennas in space plasmas, generation of coherent beams with diodes, and plasma diagnostics.

Stenzel, R. L.↗

An antidot array as an edge for total non-reflection of spin waves in yttrium iron garnet films

An array of antidots has been used as an edge to create the phenomenon of total non-reflection of spin waves in yttrium iron garnet films. At the critical angle between the line of antidots and the magnetic field, we observe a high-intensity beam of spin waves moving along the line of antidots. The properties of these waves are investigated experimentally by Brillouin light scattering spectroscopy. The conditions required for the occurrence of this phenomenon based on an analysis of the properties of the isofrequency dependencies are presented. The numerical simulations are in good agreement with those of the experimental measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dense gas in high-latitude molecular clouds

The nearby molecular clouds MBM 7, 12, 30, 32, 40, 41, and 55 were surveyed for tracers of dense gas, including the (1-0), (2-1), and (3-2) rotational lines of CS and the (1-0) lines of HCO(+) and HCN. MBM 7 and MBM 12 contain dense cores, while the other clouds contain little or no traces of dense gas. Comparison of the emission from dense gas tracers to that of (13)CO reveals that the former are more compact in angular size as well as line width. An extensive CS(2-1) survey of part of MBM 12 reveals that the emission is characterized by clumps on approximately 3 min scales as well as extended emission. Observations of the CS(1-0) and (3-2) lines using telescopes with matched beam sizes reveal that the volume density must be at least approximately 10(exp 4.5)/cc within the (3-2) emitting regions, which are approximately 0.03 pc in radius. Electron excitation of the CS rotational levels is ruled out (in the cores) by comparing the (3-2)/(1-0) line ratios with models including H2 and electron collisions. The volume density in the cores is substantially larger than in the portions of the cloud traced by CO emission. The density increases into the cores as r(exp -2), suggesting dynamical collapse. The masses of the cores are close to the virial mass, suggesting they are dynamically bound. The cores in MBM 7 and MBM 12 are thus likely to form stars; they are the nearest sites of star formation.

Reach, William T.↗

HERSCHEL OBSERVATIONS OF INTERSTELLAR CHLORONIUM

Using the Herschel Space Observatory's Heterodyne Instrument for the Far-Infrared, we have observed para-chloronium (H{sub 2}Cl{sup +}) toward six sources in the Galaxy. We detected interstellar chloronium absorption in foreground molecular clouds along the sight lines to the bright submillimeter continuum sources Sgr A (+50 km s{sup -1} cloud) and W31C. Both the para-H{sup 35}{sub 2}Cl{sup +} and para-H{sup 37}{sub 2}Cl{sup +} isotopologues were detected, through observations of their 1{sub 11}-0{sub 00} transitions at rest frequencies of 485.42 and 484.23 GHz, respectively. For an assumed ortho-to-para ratio (OPR) of 3, the observed optical depths imply that chloronium accounts for {approx}4%-12% of chlorine nuclei in the gas phase. We detected interstellar chloronium emission from two sources in the Orion Molecular Cloud 1: the Orion Bar photodissociation region and the Orion South condensation. For an assumed OPR of 3 for chloronium, the observed emission line fluxes imply total beam-averaged column densities of {approx}2 Multiplication-Sign 10{sup 13} cm{sup -2} and {approx}1.2 Multiplication-Sign 10{sup 13} cm{sup -2}, respectively, for chloronium in these two sources. We obtained upper limits on the para-H{sup 35}{sub 2}Cl{sup +} line strengths toward H{sub 2} Peak 1 in the Orion Molecular cloud and toward the massive young star AFGL 2591. The chloronium abundances inferred in this study are typically at least a factor {approx}10 larger than the predictions of steady-state theoretical models for the chemistry of interstellar molecules containing chlorine. Several explanations for this discrepancy were investigated, but none has proven satisfactory, and thus the large observed abundances of chloronium remain puzzling.

79 ASTRONOMY AND ASTROPHYSICS↗

MOLECULAR AND ATOMIC LINE SURVEYS OF GALAXIES. II. UNBIASED ESTIMATES OF THEIR STAR FORMATION MODE

We make use of our 'minimal' cold interstellar medium emission line model that predicts the molecular and atomic line emission per unit dense, star-forming gas mass to examine the utility of key line ratios in surveys of the so-called star formation 'mode' as traced by {xi}{sub SF} = M{sub dense}(H{sub 2})/M{sub total}(H{sub 2}). We argue that {xi}{sub SF} and its proxies provide very sensitive, extinction-free discriminators of rapid starburst/merger-driven versus secular quiescent/disk-like stellar mass assembly, with the most promising diagnostic to be applied in the near-future being CO J(4 {yields} 3)/ [C I]({sup 3} P{sub 1} {yields} {sup 3} P{sub 0}). These lines are accessible across nearly the full range 0 < z < 2 (thus covering the bulk of galaxy evolution) with the Atacama Large Millimeter Array. In addition to their diagnostic power, another advantage of this combination is the similar observed frequencies ({Delta}{nu}{sub 0} Almost-Equal-To 30 GHz) of the lines, resulting in nearly spatially matched beams for a fixed aperture, thus mitigating the effects of resolution/morphology bias in the interpretation of galaxy-averaged line ratios. Finally, we discuss the capability of deep blind redshift surveys with the high-frequency component of the Square Kilometer Array (SKA) in discovering H{sub 2}-rich galaxies with very low {xi}{sub SF} values. These could be the progenitors of starburst galaxies seen prior to the onset of star formation; such galaxies could be a class of extreme outliers from local (gas surface density)-(star formation rate) scaling laws, which would exclude them from current star formation or stellar-mass-selected samples. Our conservative model suggests that SKA could detect such systems residing at z {approx} 3 at a rate of 20-200 hr{sup -1}.

79 ASTRONOMY AND ASTROPHYSICS↗

Breast-Conserving Therapy: Radiotherapy Margins for Breast Tumor Bed Boost

Purpose: To quantify the interfraction position variability of the excision cavity (EC) and to compare the rib and breast surface as surrogates for the cavity. Additionally, we sought to determine the required margin for on-line, off-line and no correction protocols in external beam radiotherapy. Methods and Materials: A total of 20 patients were studied who had been treated in the supine position for 28 daily fractions. Cone-beam computed tomography scans were regularly acquired according to a shrinking action level setup correction protocol based on bony anatomy registration of the ribs and sternum. The position of the excision area was retrospectively analyzed by gray value cone-beam computed tomography-to-computed tomography registration. Subsequently, three setup correction strategies (on-line, off-line, and no corrections) were applied, according to the rib and breast surface registrations, to estimate the residual setup errors (systematic [{sigma}] and random [{sigma}]) of the excision area. The required margins were calculated using a margin recipe. Results: The image quality of the cone-beam computed tomography scans was sufficient for localization of the EC. The margins required for the investigated setup correction protocols and the setup errors for the left-right, craniocaudal and anteroposterior directions were 8.3 mm ({sigma} = 3.0, {sigma} = 2.6), 10.6 mm ({sigma} = 3.8, {sigma} = 3.2), and 7.7 mm ({sigma} = 2.7, {sigma} = 2.9) for the no correction strategy; 5.6 mm ({sigma} = 2.0, {sigma} = 1.8), 6.5 mm ({sigma} = 2.3, {sigma} = 2.3), and 4.5 mm ({sigma} = 1.5, {sigma} = 1.9) for the on-line rib strategy; and 5.1 mm ({sigma} = 1.8, {sigma} = 1.7), 4.8 mm ({sigma} = 1.7, {sigma} = 1.6), and 3.3 mm ({sigma} = 1.1, {sigma} = 1.6) for the on-line surface strategy, respectively. Conclusion: Considerable geometric uncertainties in the position of the EC relative to the bony anatomy and breast surface have been observed. By using registration of the breast surface, instead of the rib, the uncertainties in the position of the EC area were reduced.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Multi-Gigawatt Electric Highway

Ultra-Compact Electrical Transmission Lines are a new transmission line technology that uses large, hollow, aluminum beams to carry current instead of thin wires. Capacity is 4.5 times higher, power losses are 3 times lower, and cost per mile is a little lower than conventional lines. Resilience and reliability are higher. The beams are enclosed within concrete walls and out of the weather, protected from high winds, ice storms, fires, and lightning. The 230 kV version is 9 feet high x 11 feet wide and can use existing rights of way next to existing transmission lines or highways. With a little landscaping, these transmission lines are not an eyesore and will be much easier to permit on existing rights of way.

24 POWER TRANSMISSION AND DISTRIBUTION↗

SU-E-T-486: Effect of the Normalized Prescription Isodose Line On Target Dose Deficiency in Lung SBRT Based On Monte Carlo Calculation

Purpose: To investigate the impact of normalized prescription isodose line on target dose deficiency calculated with Monte Carlo (MC) vs. pencil Beam (PB) in lung SBRT. RTOG guidelines recommend prescription lines between 60% and 90% for lung SBRT. How this affects the magnitude of MC-calculated target dose deficiency has never been studied. Methods: Under an IRB-approved protocol, four lung SBRT patients were replanned following RTOG0813 by a single physicist. For each patient, four alternative plans were generated based on PB calculation prescribing to 60–90% isodose lines, respectively. Each plan consisted of 360o coplanar dynamic conformal arcs with beam apertures manually optimized to achieve similar dose coverage and conformity for all plans of the same patient. Dose distribution was calculated with MC and compared to that with PB. PTV dose-volume endpoints were compared, including Dmin, D5, Dmean, D95, and Dmax. PTV V100 coverage, conformity index (CI), and heterogeneity index (HI) were also evaluated. Results: For all 16 plans, median (range) PTV V100 and CI were 99.7% (97.5–100%) and 1.27 (1.20–1.41), respectively. As expected, lower prescription line resulted in higher target dose heterogeneity, yielding median (range) HI of 1.26 (1.05–1.51) for all plans. Comparing MC to PB, median (range) D95, Dmean, D5 PTV dose deficiency were 18.9% (11.2–23.2%), 15.6% (10.0–22.7%), and 9.4%(5.5–13.6%) of the prescription dose, respectively. The Dmean, D5, and Dmax deficiency was found to monotonically increase with decreasing prescription line from 90% to 60%, while the Dmin deficiency monotonically decreased. D95 deficiency exhibited more complex trend, reaching the largest deficiency at 80% for all patients. Conclusion: Dependence on prescription isodose line was found for MC-calculated PTV dose deficiency of lung SBRT. When comparing reported MC dose deficiency values from different institutions, their individual selections of prescription line should be considered in addition to other factors affecting the deficiency magnitude.

60 APPLIED LIFE SCIENCES↗

Luminescence of Noble Gases and Their Mixtures Under Nanosecond Electron-Beam Excitation

Luminescence spectra in the range 200–970 nm were studied for He, Ne, Ar, Kr, and Xe and Ar–Kr, Ar–Xe, and Kr–Xe mixtures under 5-ns electron-beam excitation. Emission intensity distributions over noble-gas 2p-levels were obtained. It was concluded that the main process for populating atomic levels was not dissociative recombination of molecular noble-gas ions with electrons. The emission intensity of heteronuclear ionic noble-gas molecules was noticeably less (relative to the intensities of the atomic lines) than for ion-beam excitation.

74 ATOMIC AND MOLECULAR PHYSICS↗

A predicted energetic ion signature of a neutral line in the geomagnetic tail

Under certain assumptions one can predict the formation of a magnetic neutral line on theoretical grounds, generally as a result of an unstable current sheet. Neutral points also seen to form spontaneously in a wide variety of plasma simulatioons, from MHD to fully kinetic. Hence, such magnetic null regions are central to some models of magnetotail energization and magnetic substorms. Yet the observational evidence for such regions remains controversial. This paper presents a new signature of a neutral line: the field-aligned ion beam characteristic of current sheet acceleration becomes dispersed into a 'ridge' in the velocity space distribution function as a neutral line is approached. The results were obtained using single-particle simulations in a fixed magnetic field model. The origin of the ridge is shown to be due to initially earthward going ions which pass through the neutral line region. These ions come from a smaller part of the initially antiearthward flowing distribution, generating the depletion of the distribution function below the ridge.

Martin, R. F., Jr.↗

Selective atomic layer deposition with electron-beam patterned self-assembled monolayers

The authors selectively deposited nanolines of titanium oxide (TiO{sub 2}) through atomic layer deposition (ALD) using an octadecyltrichlorosilane (OTS) self-assembled monolayer (SAM) as a nucleation inhibition layer. Electron-beam (e-beam) patterning is used to prepare nanoline patterns in the OTS SAM on SiO{sub 2}/Si substrates suitable for selective ALD. The authors have investigated the effect of an e-beam dose on the pattern width of the selectively deposited TiO{sub 2} lines. A high dose (e.g., 20 nC/cm) causes broadening of the linewidth possibly due to scattering, while a low dose (e.g., 5 nC/cm) results in a low TiO{sub 2} deposition rate because of incomplete exposure of the OTS SAMs. The authors have confirmed that sub-30 nm isolated TiO{sub 2} lines can be achieved by selective ALD combined with OTS patterned by EBL at an accelerating voltage of 2 kV and line dose of 10 nC/cm. This research offers a new approach for patterned gate dielectric layer fabrication, as well as potential applications for nanosensors and solar cells.

36 MATERIALS SCIENCE↗

Effective Area of the AXAF High Resolution Camera (HRC)

The AXAF High-Resolution Camera (HRC) was calibrated at NASA MSFC's X-Ray Calibration Facility (XRCF) during 1997 March and April. We have undertaken an analysis of the HRC effective area using all data presently available from the XRCF. We discuss our spectral fitting of the beam-normalization detectors (BNDs), our method of removing higher order contamination lines present in the spectra, and corrections for beam non-uniformities. We apply a model of photon absorption depth in order to fit a smooth curve to the quantum efficiency of the detector. This is then combined with the most recent model of the AXAF High-Resolution Mirror Assembly (HRMA) to determine the ensemble effective area versus energy for the HRC. We also address future goals and concerns.

Patnaude, Daniel↗

Using motional Stark splitting of D$_α$ emission to constrain MHD equilibrium analysis in DIII-D plasmas

Herein we report tests of an alternate technique for constraining MHD equilibrium analysis in tokamak plasmas using internal magnetic field measurements based on |$B$| measurements from the motional Stark splitting of D$_α$ spectral lines emitted by a neutral heating beam (MSE-LS). We compare results using MSE-LS with those of the standard equilibrium analysis technique based on line polarization of the D$_α$ emission (MSE-LP). An alternative to MSE-LP is needed in future devices such as ITER where MSE-LP will be difficult due to a plasma-induced coating of the first optical element. The tests utilized data from 10 DIII-D shots with 7 MSE-LS and 14 MSE-LP views covering a range of radii along the outer midplane of the plasma. Seven MSE-LS measurements can contribute significantly to the equilibrium reconstruction of pressure and q profiles using both synthetic and experimental DIII-D MSE-LS data. For example, 7 MSE-LS plus seven MSE-LP measurements give a fit quality that is as good as the same cases with 14 MSE-LP measurements. Analyzing synthetic data for 14 MSE-LS measurements shows significant improvement in fitting quality over the case with 7 MSE-LS locations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗