Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Solar cycle dependence of the location of the Venus bow shock

Initial measurements of the Venus bow shock obtained by Pioneer Venus in 1979 near solar maximum indicated that the bow shock was on average 2.44 RV from the center of the planet in the terminator plane. This is 0.35 RV further from Venus than observed by Venera 9/10 in 1976. In the past this discrepancy has been attributed to some effect of the solar cycle. Recent measurements by Pioneer Venus support this interpretation. In 1980 the distance to the bow shock reached a maximum of 2.45 RV and since then has been almost steadily declining toward the distance measured by Venera near solar minimum. The variation in bow shock position is well correlated with the sunspot number and the F 10.7 cm flux over this period. This behavior is attributed to the variation in the neutral atmosphere of Venus with the solar cycle and its subsequent effect on the mass-loading of the solar wind.

Alexander, C. J.↗

Simulations of heavy ion heating by electromagnetic ion cyclotron waves driven by proton temperature anisotropies

Heating of heavy ions by the electromagnetic ion cyclotron (EMIC) waves, which are driven by proton temperature anisotropies, is studied by means of hybrid particle simulations. Initially, relaxation of the temperature anisotropies in the proton distribution and isotropic heating of the heavy ions are observed (phase I), followed by substantial perpendicular heating of the heavy ions (phase II). The heavy ions are distinctly gyrophase modulated by the EMIC waves. The isotropic heating in phase I is due to magnetic trapping by the excited proton cyclotron waves. The perpendicular heating in phase II is attributed to cyclotron resonance with the EMIC waves, which becomes possible by means of the preceding heating in phase I. Saturation of the EMIC instability is instead attributed to magnetic trapping of the majority ions: protons. When the proton anisotropy is very large, frequency shift (decrease) of the proton cyclotron waves to less than 1/2 Ohm(p) is observed. The present mechanism is not only relevant to He(+) heating in the dayside equator of the magnetosphere, but it also predicts hot He2(+) ions behind the earth's bow shock.

Tanaka, M.↗

Automatic probabilistic knowledge acquisition from data

A computer program for extracting significant correlations of attributes from masses of data is outlined. This information can then be used to develop a knowledge base for a probabilistic expert system. The method determines the best estimate of joint probabilities of attributes from data put into contingency table form. A major output from the program is a general formula for calculating any probability relation associated with the data. These probability relations can be utilized to form IF-THEN rules with associated probability, useful for expert systems.

Gevarter, W. B.↗

Zonal wind observations during a geomagnetic storm

In situ measurements taken by the Wind and Temperature Spectrometer (WATS) onboard the Dynamics Explorer 2 spacecraft during a geomagnetic storm display zonal wind velocities that are reduced in the corotational direction as the storm intensifies. The data were taken within the altitudes 275 to 475 km in the dusk local time sector equatorward of the auroral region. Characteristic variations in the value of the Dst index of horizontal geomagnetic field strength are used to monitor the storm evolution. The detected global rise in atmospheric gas temperature indicates the development of thermospheric heating. Concurrent with that heating, reductions in corotational wind velocities were measured equatorward of the auroral region. Just after the sudden commencement, while thermospheric heating is intense in both hemispheres, eastward wind velocities in the northern hemisphere show reductions ranging from 500 m/s over high latitudes to 30 m/s over the geomagnetic equator. After 10 hours storm time, while northern thermospheric heating is diminishing, wind velocity reductions, distinct from those initially observed, begin to develop over southern latitudes. In the latter case, velocity reductions range from 300 m/s over the highest southern latitudes to 150 m/s over the geomagnetic equator and extend into the Northern Hemisphere. The observations highlight the interhemispheric asymmetry in the development of storm effects detected as enhanced gas temperatures and reduced eastward wind velocities. Zonal wind reductions over high latitudes can be attributed to the storm induced equatorward spread of westward polar cap plasma convection and the resulting plasma-neutral collisions. However, those collisions are less significant over low latitudes; so zonal wind reductions over low latitudes must be attributed to an equatorward extension of a thermospheric circulation pattern disrupted by high latitude collisions between neutrals transported via eastward winds and ions convecting westward.

Miller, N. J.↗

On Io's control of Jovian decametric radio emissions

Io's control of Jovian decametric radio emission (DAM) has been attributed to Io distorting the electron distribution in the inner Jovian magnetosphere. Observations of Faraday rotation in DAM are used to determine the properties of the electron distribution before and after its interaction with Io. It is shown that there is an enhancement in the density of the energetic component in the Io plasma torus correlated with certain Jovian longitude. Io's interaction with this energetic component can produce heating of this component. The Io-controlled emission is attributed to enhanced emission from the heated electrons moving down the field lines to Jupiter.

Winglee, R. M.↗

IRAS observations of the nuclear bulge of M31

IRAS observations of the nuclear bulge of M31 are reported. The 12-micron and 25-micron emission is attributed to circumstellar dust emission from late-type stars, while the 60 and 100-micron emission is attributed to interstellar dust emission. The total input rate of circumstellar gas and dust into the interstellar medium is estimated to be 0.015 solar masses/yr. The mass of dust in the interstellar medium estimated from the far-infared flux is about 1500 solar masses. The color temperature of the far-infrared-emitting dust is 45 K. The time required to accumulate the observed mass in interstellar dust is about 10 million yr. Either supernova-generated winds or star formation can deplete this gas without violating the observations.

Soifer, B. T.↗

Unstable-magnetic-drift waves in a plasma with temperature anisotropy

It is pointed out that under certain conditions, such as a weak electron temperature anisotropy, the magnetic-drift wave instability can become rather important, and the growth rate can be greater than the ion gyrofrequency when the scale length of the density gradient is comparable to, or shorter than, the thermal ion gyroradius. The instability is attributed to wave-electron interactions, and the growth rate is far greater than the case investigated by Krall and Rosenbluth (1963) who attributed the instability to wave-ion interactions. The anticipated vanishing of the instability is observed as epsilon sub n/epsilon sub B approaches zero. The presently observed instability may be used to explain the low-frequency fluctuations evidenced by the Active Particle Tracer Explorer Ion Release Module magnetometer measurements, and may contribute to the acceleration of ions along the plasma cometary tail.

Wu, C. S.↗

Thermomechanical treatment of 2124 PM aluminum alloys with low and high dispersoid levels

The effects of thermomechanical treatment (TMT) on the mechanical properties and metallurgical structure of 2124 powder metallurgy aluminum alloys prepared from rapidly solidified powders were investigated. The alloys were prepared by using a standard canning/vacuum degassing/hot consolidation/extrusion sequence. Two compositions, with manganese contents of 0.5 and 1.5 percent, were investigated to examine the effects of low and high dispersoid levels. The results indicate that significant improvements in strength can be accomplished through TMT for this PM alloy system with little loss in toughness. The increase in strength observed is attributed to the presence of much finer, more homogeneous S-prime precipitation than that observed without TMT. Rolling deformation at room temperature resulted in some tendency for nonuniform (planar) deformation and resulted in slightly lower notch strength values. The lower notch strengths observed in the higher manganese composition were attributed to the coarser, more dense dispersoids observed in this material.

Sarkar, B.↗

Saturn: A unique magnetosphere/ionosphere/ring interaction

Latitudinal variations in images of Saturn's disk, upper atmospheric temperatures, and ionospheric electron density anomalies found in magnetic conjugacy with features in Saturn's ring plane are discussed. It is suggested that latitudinal variations are the result of a variable influx of water, transported along magnetic field lines from sources in Saturn's ring plane. Two such sources with optical counterparts in the inner B ring can be readily attributed to an electromagnetic erosion process that transports water in the form of high charge to mass ratio particles (ions or submicron grains with 1 electron charge) along magnetic field lines from the ring plane to Saturn's atmosphere. Another is attributed to erosion of the icy satellite Enceladus and the associated E ring.

Converney, J. E. P.↗

Effects of fiber motion on the acoustic behavior of an anisotropic, flexible fibrous material

The acoustic behavior of a flexible fibrous material was studied experimentally. The material consisted of cylindrically shaped fibers arranged in a batting with the fibers primarily aligned parallel to the face of the batting. This type of material was considered anisotropic, with the acoustic propagation constant depending on whether the dirction of sound propagation was parallel or normal to the fiber arrangement. Normal incidence sound absorption measurements were taken for both fiber orientations over the frequency range 140 to 1500 Hz and with bulk densities ranging from 4.6 to 67 kg/cu m. When the sound propagated in a direction normal to the fiber alignment, the measured sound absorption showed the occurrence of a strong resonance, which increased absorption above that attributed to viscous and thermal effects. When the sound propagated in a direction parallel to the fiber alignment, indications of strong resonances in the data were not present. The resonance in the data for fibers normal to the direction of sound propagation is attributed to fiber motion. An analytical model was developed for the acoustic behavior of the material displaying the same fiber motion characteristics shown in the measurements.

Dahl, Milo D.↗

Comparative performance of diffused junction indium phosphide solar cells

A comparison is made between indium phosphide solar cells whose p-n junctions were processed by open tube capped diffusion, and closed tube uncapped diffusion, of sulfur into Czochralski grown p-type substrates. Air mass zero, total area, efficiencies ranged from 10 to 14.2 percent, the latter value attributed to cells processed by capped diffusion. The radiation resistance of these latter cells was slightly better, under 1 MeV electron irradiation. However, rather than being process dependent, the difference in radiation resistance could be attributed to the effects of increased base dopant concentration. In agreement with previous results, both cells exhibited radiation resistance superior to that of gallium arsenide. The lowest temperature dependency of maximum power was exhibited by the cells prepared by open tube capped diffusion. Contrary to previous results, no correlation was found between open circuit voltage and the temperature dependency of Pmax. It was concluded that additional process optimization was necessary before concluding that one process was better than another.

Weinberg, I.↗

Interplanetary field control of the location of the Venus bow shock - Evidence for comet-like ion pickup

The location of the Venus bow shock is found to be sensitive to both the angle of the IMF to the solar wind flow and the phase of the solar cycle. The former dependence is attributed to the effect of planetary ion pickup by the magnetosheath convection electric field analogous to cometary ion pickup by the solar wind electric field. The latter dependence is attributed to the solar-cycle variation in the density of exospheric neutrals in the magnetosheath analogous to the cometary response to distance from the sun. Both a north-south and a pole-equator asymmetry in the location of the bow shock are also found, controlled by the direction of the IMF in the plane perpendicular to the solar wind flow.

Alexander, C. J.↗

Saturn - A unique magnetosphere/ionosphere/ring interaction

Latitudinal variations in images of Saturn's disc, upper atmospheric temperatures, and ionospheric electron density anomalies are found in magnetic conjugacy with - i.e., magnetically linked to - features in Saturn's ring plane. It is suggested that these latitudinal variations are the result of a variable influx of water, transported along magnetic field lines from sources in Saturn's ring plane. Two such sources with optical counterparts in the inner B ring can be readily attributed to an electromagnetic erosion process that transports water in the form of high charge to mass ratio particles (ions or submicron grains with 1 electron charge) along magnetic field lines from the ring plane to Saturn's atmosphere. Another is attributed to erosion of the icy satellite Enceladus and the associated E ring.

Connerney, J. E. P.↗

Kinetics of the hydrolysis of guanosine 5'-phospho-2-methylimidazolide

The hydrolysis kinetics of guanosine 5'-phospho-2-methylimidazolide (2-MeImpG) in aqueous buffered solutions of various pH's was studied at 75 and 37 C, using spectrophotometric and HPLC techniques. The hydrolysis was found to be very slow even at low pH. At 75 C and pH at or below l.0, two kinetic processes were observed: the more rapid one was attributed to the hydrolysis of the phosphoimidazolide P-N bond; the second, much slower one, was attributed to the cleavage of the glycosidic bond. It is noted that the P-N hydrolysis in phosphoimidazolides is very slow compared to other phosphoramidates, and that this might be one of the reasons why the phosphoimidazolides showed an extraordinary ability to form long oligomers under template-directed conditions.

Kanavarioti, Anastassia↗

Masking of the circadian rhythms of heart rate and core temperature by the rest-activity cycle in man

Experiments were conducted to estimate the magnitude of the masking effect produced in humans by alternate periods of physical activity and rest or sleep on the circadian rhythms of heart rate and core temperature. The heart rate, rectal temperature, and nondominant wrist activity were monitored in 12 male subjects during 6 days of normal routine at home and during 6 days of controlled bed-rest regimen. The comparisons of averaged waveforms for the activity, heart rate, and temperature indicated that about 45 percent of the range of the circadian heart rate rhythm during normal routine and about 14 percent of the range of the circadian temperature rhythm were attributable to the effects of activity. The smaller effect of activity on the temperature rhythm may be partially attributable to the fact that core temperature is being more rigorously conserved than heart rate, at least during moderate exercise.

Gander, Philippa H.↗

Interstellar polycyclic aromatic hydrocarbons and carbon in interplanetary dust particles and meteorites

Raman spectra of interplanetary dust particles (IDPs) and meteorites containing material similar to polycyclic aromatic hydrocarbons (PAHs) show features that are similar in position and relative strength to interstellar IR emission features attributable to vibrational transitions in free molecular-sized PAHs. In addition, these spectra sometimes show red photoluminescence that has elsewhere been attributed to PAHs, and a part of the carbonaceous phase in IDPs and meteorites contain a degree of deuterium enrichment anticipated in small, free PAHs that are exposed to ISM UV radiation. These observations suggest that some of the IDPs' carbonaceous material may have been produced in circumstellar dust shells, and only slightly modified in interstellar space.

Allamandola, L. J.↗

Production of Cl2O2 from the self-reaction of the ClO radical

The species Cl2O2 has been generated in a gaseous flow system at 220-240 K by reacting Cl atoms with one of three different ClO precursors: O3, Cl2O, or OClO. The infrared spectra of the reactive mixture indicate that at least two different dimers are produced: a predominant form with bands centered at 1225 and 1057/cm attributed to ClOOCl, and a second form with a band at 650/cm attributed to ClOClO. The UV spectrum of the predominant form shows a maximum absorption cross section of about 6.5 x 10 to the -18th sq cm/molecule around 270 nm, with a wing extending beyond 300 nm. The implications of these results for the chemistry of the stratosphere are discussed.

Molina, L. T.↗

The crystallization of tough thermoplastic resins in the presence of carbon fibers

The presence of carbon fibers increased the crystallization rates of both PEEK and PPS thermoplastic polymers. The effect was most pronounced at higher crystallization temperatures. Isothermal crystallization rates were analyzed by applying classical phenomenological nucleation theory. Unusually high values of the so-called Avrami exponent were found for neat PEEK. Isothermal crystallization of PEEK and PPS polymers produced crystalline samples having a wide variety of melting temperatures. The melting as observed by differential scanning calorimetry occurred as dual endotherms which were called primary (higher temperature) and secondary melting peaks. Each primary peak accounted for most of the crystallinity present. The secondary peaks represented the melting of crystallites formed later than those attributable to the primary endotherms. The presence of carbon fibers increased the thermal stability of both PEEK and PPS crystallites as manifested by higher temperatures for the primary melting peaks. This may be attributable to increased crystallite size, greater crystallite perfection, and/or favorable modification of the crystallite interface. Over the range studied, crystallization temperature strongly influenced the positions of the secondary peaks but not the primary peaks.

Theil, Michael H.↗