Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstract”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Influence of Ni-Cr substitution on the magnetic and electric properties of magnesium ferrite nanomaterials

Graphical abstract: Variation of saturation magnetization (M{sub S}) and magnetocrystalline anisotropy coefficient (K{sub 1}) with Ni-Cr content for Mg{sub 1-x}Ni{sub x}Cr{sub x}Fe{sub 2-x}O{sub 4} (x = 0.0-0.5). Highlights: Black-Right-Pointing-Pointer Mg{sub 1-x}Ni{sub x}Cr{sub x}Fe{sub 2-x}O{sub 4} are synthesized by novel PEG assisted microemulsion method. Black-Right-Pointing-Pointer High field regime of M-H loops are modeled using Law of Approach to saturation. Black-Right-Pointing-Pointer A considerable increase in the value of M{sub S} from 148 kA/m to 206 kA/m is achieved Black-Right-Pointing-Pointer {rho}{sup RT} enhanced to the order of 10{sup 9} {Omega}cm at potential operational range around 300 K. -- Abstract: The effect of variation of composition on the structural, morphological, magnetic and electric properties of Mg{sub 1-x}Ni{sub x}Cr{sub x}Fe{sub 2-x}O{sub 4} (x = 0.0-0.5) nanocrystallites is presented. The samples were prepared by novel polyethylene glycol (PEG) assisted microemulsion method with average crystallite size of 15-47 nm. The microstructure, chemical, and phase analyses of the samples were studied by the scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive X-ray fluorescence (ED-XRF), and X-ray diffraction (XRD). Compositional variation greatly affected the magnetic and structural properties. The high-field regimes of the magnetic loops are modelled using the Law of Approach (LOA) to saturation in order to extract information about their anisotropy and the saturation magnetization. Thermal demagnetization measurements are carried out using VSM and significant enhancement of the Curie temperature from 681 K to 832 K has been achieved by substitution of different contents of Ni-Cr. The dc-electrical resistivity ({rho}{sup RT}) at potential operational range around 300 K is increased from 7.5 Multiplication-Sign 10{sup 8} to 4.85 Multiplication-Sign 10{sup 9} {Omega}cm with the increase in Ni-Cr contents. Moreover, the results of the present study provide sufficient evidence to show that the electric and magnetic properties of Mg-ferrite have been improved significantly by substituting low contents of Ni-Cr.

36 MATERIALS SCIENCE↗

A novel magnetically separable TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofiber with high photocatalytic activity under UV-vis light

Graphical abstract: A novel magnetically separable composite photocatalyst TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofiber was prepared by sol-gel method and electrospinning technique, which can be reclaimed with a magnet, and the decolorizing efficiency of MB solution reached 95.87%. Highlights: Black-Right-Pointing-Pointer The composite TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofibers with diameter of 110 {+-} 28 nm have been successfully synthesized by the combination of sol-gel method and electrospinning technique. Black-Right-Pointing-Pointer The presence of Co{sup 2+} or/and Fe{sup 3+} ions may occupy some of the lattice sites of TiO{sub 2} to form an iron-titanium solid solution and narrow the band gap, which broadens the response region of visible light. Black-Right-Pointing-Pointer The resultant nanofibers not only have high decomposition efficiency with methylene blue (MB) under the UV irradiation, which is close to that of Degussa P25, but also can be separated with a magnet and avoid the secondary pollution of the treated water. -- Abstract: A novel magnetically separable heterogeneous photocatalyst TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofiber was prepared by sol-gel method and electrospinning technology, followed by heat treatment at 550 Degree-Sign C for 2 h. The phase structure, morphology and magnetic property of the composite nanofibers were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscope and vibrating sample magnetometer analysis. The photocatalytic studies of TiO{sub 2}/CoFe{sub 2}O{sub 4} fibers suggested that the presence of CoFe{sub 2}O{sub 4} not only enhanced the absorbance of UV light, but also broadened the response region to visible light. The decolorizing efficiency of methylene blue (MB) solution reaches 95.87% over TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofibers under 300 W Hg lamp after 5 h, which is close to that of Degussa P25. Furthermore, these fibers can be collected with a magnet for reuse and effectively avoid the secondary pollution of the treated water.

36 MATERIALS SCIENCE↗

Synthesis, characterization and crystal structure of a novel Strandberg-type polyoxoselenomolybdate Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H{sub 2}O

Graphical abstract: Crystal structure of Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H2O. Highlights: Black-Right-Pointing-Pointer Synthesis of the first Strandberg-type polyoxoselenomolybdate Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H{sub 2}O. Black-Right-Pointing-Pointer Characterization of the novel compound. Black-Right-Pointing-Pointer Chirality of the space group C2 of compound implies that it is expected to have nonlinear optical (NLO) properties -- Abstract: An inorganic compound formulated as Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H{sub 2}O (1) has been isolated by conventional solution method and structurally characterized by single-crystal X-ray diffraction methods, scanning electron microscopy (SEM), powder XRD, IR, UV-vis spectra, and cyclic voltammetry measurements. This compound crystallizes in the monoclinic system, space group C2 with unit a = 19.701 (3) Angstrom-Sign , b = 10.296 (2) Angstrom-Sign , c = 12.134 (4) Angstrom-Sign , {beta} = 106.96 (2) Degree-Sign and Z = 4. The crystal structure of (1) is built up from a Strandberg clusters connected through hydrogen-bonding interactions into a three-dimensional supramolecular network.

36 MATERIALS SCIENCE↗

Structural and electrochemical properties of nanostructured nickel silicides by reduction and silicification of high-surface-area nickel oxide

Graphical abstract: Nanostructured nickel silicides have been synthesized by reduction and silification of high-surface-area nickel oxide, and exhibited remarkably like-noble metal property, lower electric resistivity, and ferromagnetism at room temperature. Highlights: Black-Right-Pointing-Pointer NiSi{sub x} have been prepared by reduction and silification of high-surface-area NiO. Black-Right-Pointing-Pointer The structure of nickel silicides changed with increasing reaction temperature. Black-Right-Pointing-Pointer Si doping into nickel changed the magnetic properties of metallic nickel. Black-Right-Pointing-Pointer NiSi{sub x} have remarkably lower electric resistivity and like-noble metal property. -- Abstract: Nanostructured nickel silicides have been prepared by reduction and silicification of high-surface-area nickel oxide (145 m{sup 2} g{sup -1}) produced via precipitation. The prepared materials were characterized by nitrogen adsorption, X-ray diffraction, thermal analysis, FT-IR spectroscopy, scanning electron microscopy, transmission electron microscopy, magnetic and electrochemical measurements. The nickel silicide formation involves the following sequence: NiO (cubic) {yields} Ni (cubic) {yields} Ni{sub 2}Si (orthorhombic) {yields} NiSi (orthorhombic) {yields} NiSi{sub 2} (cubic), with particles growing from 13.7 to 21.3 nm. The nickel silicides are ferromagnetic at room temperature, and their saturation magnetization values change drastically with the increase of Si content. Nickel silicides have remarkably low electrical resistivity and noble metal-like properties because of a constriction of the Ni d band and an increase of the electronic density of states. The results suggest that such silicides are promising candidates as inexpensive yet functional materials for applications in electrochemistry as well as catalysis.

36 MATERIALS SCIENCE↗

Photocatalytic degradation of gaseous toluene over TiO{sub 2}-SiO{sub 2} composite nanotubes synthesized by sol-gel with template technique

Graphical abstract: TiO{sub 2}-SiO{sub 2} nanotubes (b) were fabricated by sol-gel method using ZnO nanowires (a) as template. Highlights: Black-Right-Pointing-Pointer A simple method to prepare TiO{sub 2}-SiO{sub 2} nanotubes for photocatalytic toluene removal. Black-Right-Pointing-Pointer The TiO{sub 2}-SiO{sub 2} nanotubes have a small blue shift and higher absorption intensity. Black-Right-Pointing-Pointer The TiO{sub 2}-SiO{sub 2} nanotubes have an enhanced photoactivity in degrading gaseous toluene. -- Abstract: TiO{sub 2}-SiO{sub 2} composite nanotubes were successfully synthesized by a facile sol-gel technique utilizing ZnO nanowires as template. The nanotubes were well characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, N{sub 2} adsorption-desorption analysis and UV-vis diffuse reflectance spectroscopy. The nanotubular TiO{sub 2}-SiO{sub 2} composite photocatalysts showed diameter of 300-325 nm, fine mesoporous structure and high specific surface area. The results indicated that the degradation efficiency of gaseous toluene could get 65% after 4 h reaction using the TiO{sub 2}-SiO{sub 2} composite as the photocatalyst under UV light illumination, which was higher than that of P25.

36 MATERIALS SCIENCE↗

Electrospinning preparation and photoluminescence properties of poly (methyl methacrylate)/Eu{sup 3+} ions composite nanofibers and nanoribbons

Graphical abstract: Nanofibers and nanoribbons of poly (methyl methacrylate)/Eu{sup 3+} ions composites were successfully prepared by using a simple electrospinning technique. And the photoluminescence properties of the above PMMA/Eu{sup 3+} ions composites were studied. Highlights: Black-Right-Pointing-Pointer Nanofibers and nanoribbons of PMMA/Eu{sup 3+} ions composites are fabricated by electrospinning. Black-Right-Pointing-Pointer Photoluminescence properties of as-electrospun PMMA/Eu{sup 3+} ions composites are studied. Black-Right-Pointing-Pointer The ratios of electric- and magnetic-dipole transitions are enhanced by increasing electrospinning voltage. -- Abstract: Nanofibers and nanoribbons of poly (methyl methacrylate) (PMMA)/Eu{sup 3+} ions composites with different concentration of Eu{sup 3+} ions were successfully prepared by using a simple electrospinning technique. From the results of scanning electron microscopy and energy-dispersive X-ray spectroscopy, we found that the morphology of the as-electrospun PMMA/Eu{sup 3+} ions composites could be changed from fiber to ribbon structure by adjusting the concentration of Eu{sup 3+} ions in the electrospun precursor solution. The coordination between the Eu{sup 3+} ions and PMMA molecules were investigated by Fourier transform infrared spectroscopy and differential thermal analysis. The photoluminescence (PL) properties of the as-electrospun PMMA/Eu{sup 3+} ions composites were studied in comparison to those of the Eu(NO{sub 3}){sub 3} powder. It was showed that the {sup 5}D{sub 0}-{sup 7}F{sub J} (J = 0, 1, 2, 3, 4) emission appeared in the PL spectra of the as-electrospun PMMA/Eu{sup 3+} ions composites, whereas the {sup 5}D{sub 0}-{sup 7}F{sub 0} emission was completely absent in the PL spectra of Eu(NO{sub 3}){sub 3} powder due to the different local environments surrounding Eu{sup 3+} ions. It was interesting to note that the intensity ratios of the electric-dipole and magnetic-dipole transitions for the PMMA/Eu{sup 3+} ions composites could be enhanced significantly by increasing electrospinning voltage.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and luminescence properties of hierarchical SrF{sub 2} and SrF{sub 2}:Ln{sup 3+} (Ln = Er, Nd, Yb, Eu, Tb) micro/nanocomposite architectures

Graphical abstract: Uniform SrF{sub 2} and SrF{sub 2}:Ln{sup 3+} (Ln = Er, Nd, Yb, Eu, Tb) hierarchical microsphere assembled by numerous nanoplates have been successfully synthesized via a facile hydrothermal process in the presence of chelating reagent. Highlights: Black-Right-Pointing-Pointer Uniform SrF{sub 2} and SrF{sub 2}:Ln{sup 3+} (Ln = Er, Nd, Yb, Eu, Tb) hierarchical microsphere were obtained by a simple hydrothermal method. Black-Right-Pointing-Pointer The reaction time, chelating reagent and F source play important roles for the formation of hierarchical microspheres. Black-Right-Pointing-Pointer The luminescence properties of lanthanide ion-doped SrF{sub 2} hierarchical microstructures were discussed. -- Abstract: Highly uniform SrF{sub 2} and SrF{sub 2}:Ln{sup 3+} (Ln = Er, Nd, Yb, Eu, Tb) hierarchical microspheres assembled by 2D nanoplates have been successfully synthesized by a facile and friendly hydrothermal route. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectra were used to characterize the samples. The experimental results indicate that reaction time and chelating reagent play a key role in forming the hierarchical microspheres. The formation mechanism was proposed based on the evolution of this morphology as a function of hydrothermal time. The near-infrared luminescence of lanthanide ions (Er, Nd, and Yb) doped SrF{sub 2} microspheres were discussed in detail. In addition, the as-obtained SrF{sub 2}:Eu{sup 3+} sample exhibits orange-red emission centered at 590 nm under excitation at 393 nm, while the SrF{sub 2}:Tb{sup 3+} exhibits a strong green emission at 540 nm. The as-synthesized SrF{sub 2}:Ln{sup 3+} luminescent microspheres might find some potential applications in areas of photoluminescence, telecommunication and laser emission.

36 MATERIALS SCIENCE↗

The structural influence of aluminium ions on emission characteristics of Sm{sup 3+} ions in lead aluminium silicate glass system

Graphical abstract: The optical absorption and photoluminescence spectra of Sm ions in PbO-Al{sub 2}O{sub 3}-SiO{sub 2} glasses mixed with different concentrations of Al{sub 2}O{sub 3} have been investigated. From these spectra, the emission probabilities and also fluorescence lifetime principal transition viz., {sup 4}G{sub 5/2} {yields} {sup 6}H{sub 7/2} of Sm{sup 3+} ions of has been evaluated. The analysis of results of these studies has indicated that there is a less radiative trapping and enhanced fluorescence lifetime and high quantum efficiency in the glasses mixed with 8.0 mol% of Al{sub 2}O{sub 3}. Highlights: Black-Right-Pointing-Pointer Glasses of the composition (40 - x)PbO-(5 + x)Al{sub 2}O{sub 3}-54SiO{sub 2}:1.0Sm{sub 2}O{sub 3} with x = 5-10 mol% were prepared. Black-Right-Pointing-Pointer Spectroscopic properties (OA, PL and IR) were investigated. Black-Right-Pointing-Pointer Emission probability, lifetime, branching ratio of {sup 4}G{sub 5/2} {yields} {sup 6}H{sub 7/2} transition of Sm{sup 3+} have been evaluated. Black-Right-Pointing-Pointer Analysis of the results indicated that glass mixed with 8.0 mol% exhibits high luminescence efficiency. -- Abstract: Optical absorption and photoluminescence characteristics of Sm{sup 3+} ions in lead silicate glasses mixed with different concentrations of Al{sub 2}O{sub 3} (5-10 mol%) have been investigated. From these studies, the radiative properties viz., spontaneous emission probability A, the total emission probability, the radiative lifetime {tau}{sub R}, the fluorescent branching ratio {beta} of emission transition of {sup 4}G{sub 5/2} {yields} {sup 6}H{sub 7/2} along with other transitions for Sm{sup 3+} have been evaluated and found to be the highest for the glass mixed with 8.0 mol% of Al{sub 2}O{sub 3}.The IR spectral studies have indicated that Al{sup 3+} ions do participate in the glass network with AlO{sub 4} and AlO{sub 6} structural units and further revealed that the concentration of octahedral aluminium ions induce bonding defects in the glass network. Such bonding defects are assumed to be responsible for low phonon losses in these glasses and lead to higher values of radiative parameters for the glass mixed with 8.0 mol% of Al{sub 2}O{sub 3}.

36 MATERIALS SCIENCE↗

Effects of aluminum substitution on photocatalytic property of BiVO{sub 4} under visible light irradiation

Graphical abstract: Visible-light-driven Al/BiVO{sub 4} photocatalyst was prepared by a hydrothermal process. After introducing Al, the BiVO{sub 4} particles retain monoclinic scheelite structures and the ability of visible light absorption is enhanced. XPS and FTIR results reveal that the Al ions influence the local structure of the BiVO{sub 4}. The photocatalytic experiments demonstrate that the Al species incorporation can effectively enhance the photocatalytic activity of BiVO{sub 4} due to the existence of distorted VO{sub 4}{sup 3-} tetrahedron and the stronger optical absorption intensity. Highlights: Black-Right-Pointing-Pointer The visible-light-driven Al/BiVO{sub 4} photocatalysts are first prepared in our study. Black-Right-Pointing-Pointer It is found that Al is introduced into the BiVO{sub 4} lattice successfully. Black-Right-Pointing-Pointer The Al-doped BiVO{sub 4} shows a far higher photocatalytic activity than undoped BiVO{sub 4}. Black-Right-Pointing-Pointer One of the reason for the higher activity is the distorted VO{sub 4}{sup 3-} tetrahedron. Black-Right-Pointing-Pointer Another reason for the higher activity is the strong optical absorption intensity. -- Abstract: Novel visible-light-driven Al/BiVO{sub 4} photocatalysts were synthesized via a facile hydrothermal method for the first time. The samples were characterized by X-ray diffraction, N{sub 2}-sorption, UV-vis diffuse reflectance spectra, scanning electron microscopy, high-resolution transmission electron microscopy, Fourier transformed infrared spectra and X-ray photoelectron spectroscopy. The photocatalytic activity of the samples was evaluated by the decomposition of methylene blue under visible light irradiation (400 nm < {lambda} <580 nm) and was compared with that of single-phase BiVO{sub 4}. The results revealed that the introduction of Al can improve photocatalytic performance greatly and different concentration of Al resulted in different photocatalytic activity. The highest activity is obtained by the sample with a doping concentration of 12 at%. The reason for the enhanced photocatalytic activities of Al/BiVO{sub 4} samples was also discussed in this paper.

36 MATERIALS SCIENCE↗

Synthesis and characterization of a PbO{sub 2}-clay nanocomposite: Removal of lead from water using montmorillonite

Graphical abstract: The replacement of Na by Pb in the interlayer space of the smectite leads to a decrease in the intensity of the the (0 0 1) reflection as the concentration of lead nitrate increases. A significant restructuring at the particle scale is observed leading probably to the exfoliation of the caly. In addition, the thermal behaviour of the montmorillonite samples with regard to their dehydration and dehydroxilation capacities is significantly influenced. This leads to a lowering of the water content and a decrease in the ionic conductivity of the clay. Highlights: Black-Right-Pointing-Pointer In the clay, Pb replaces Na ions and a significant restructuring at the particle scale is observed. Black-Right-Pointing-Pointer Pb influenced significantly the thermal behaviour of the clay with regard to its dehydration. Black-Right-Pointing-Pointer In the interlayer space, the exchange of Na by Pb leads to a decrease in the protonic conductivity. Black-Right-Pointing-Pointer A PbO{sub 2}-clay nanocomposite material with good conductivity is synthesized. -- Abstract: The aim of this paper is to present the results obtained with Pb(II) sorption on an Algerian Clay. The experiments were carried out using a batch process. Powder X-rays diffraction patterns (PXRD) prove that in the montmorillonite Pb replaces Na ions. A significant restructuring at the particle scale is observed leading to the disappearance of the d{sub 001} reflection of the clay at high concentrations of lead. The replacement of hydrated Na with Pb ions influenced significantly the thermal behaviour of the montmorillonite samples with regard to their dehydration and dehydroxilation capacities with a lowering of the water content. A PbO{sub 2}-clay composite material with good electrical conductivity is synthesized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of flower-like CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.3) microspheres

Graphical abstract: In this paper, flower-like CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.3) microspheres were prepared via biomolecule-assisted solvothermal rate with CuCl{sub 2}{center_dot}2H{sub 2}O, GaCl{sub 3}, InCl{sub 3} and L-cystine as raw materials. UV-vis absorption spectrum showed that the band gap of CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} microspheres was about 2.427 eV. Highlights: Black-Right-Pointing-Pointer We reported a small biomolecule-assisted route to synthesis CuIn{sub 0.3}Ga{sub 0.7}S{sub 2}. Black-Right-Pointing-Pointer The possible mechanisms of flower-like CuIn{sub 0.3}Ga{sub 0.7}S{sub 2} microspheres were proposed. Black-Right-Pointing-Pointer The as-prepared CuIn{sub 0.3}Ga{sub 0.7}S{sub 2} products were investigated by XRD, XPS, FESEM and TEM. Black-Right-Pointing-Pointer The optical properties were investigated by UV-vis spectroscopy and Raman spectrum. -- Abstract: We report the formation and characterization of the flower-like CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.3) microspheres using CuCl{sub 2}{center_dot}2H{sub 2}O, GaCl{sub 3}, InCl{sub 3} and L-cystine in the mixed solvent of ethylene glycol and distilled water (1:2, v/v) at 200 Degree-Sign C for 24 h. XRD results indicated that the CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} nanostructures have a (1 1 2) preferred orientation. The EDS and XPS analyses of the sample revealed that Cu, In, Ga and S were present in an atomic ratio of approximately 1:0.7:0.3:2. FESEM and TEM images showed that the product was microspheres, consisting of nanoplates with the thickness of about 20 nm. The optical properties were investigated by ultraviolet-visible (UV-vis) absorption spectroscopy and Raman spectroscopy. UV-vis absorption spectrum indicated that the band gap of as-synthesized flower-like CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} microspheres was about 2.427 eV. Raman spectrum of the obtained CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} exhibited a high-intensity peak at 302 cm{sup -1} could be assigned as A1-mode.

36 MATERIALS SCIENCE↗

Study on preparation and luminescent properties of Eu{sup 3+}-doped LaAlO{sub 3} and GdAlO{sub 3}

Graphical abstract: The optical property of Eu{sup 3+} ions is seriously influenced by the two kinds of host materials of LaAlO{sub 3} and GdAlO{sub 3}, especially the charge transfer (CT) band energy of Eu{sup 3+}-O{sup 2-}. We have discussed it in detail based on experiments and quantitative calculations. Highlights: Black-Right-Pointing-Pointer Ln{sub 1-x}AlO{sub 3}:Eu{sub x}{sup 3+} (Ln = La, Gd) phosphors were prepared by sol-gel method. Black-Right-Pointing-Pointer The optical properties of Ln{sub 1-x}AlO{sub 3}:Eu{sub x}{sup 3+} (Ln = La, Gd) phosphors have been investigated in detail. Black-Right-Pointing-Pointer We quantitatively calculated the bond lengths and bond covalency of Gd-O and La-O bonds. Black-Right-Pointing-Pointer The calculated charge transfer energies of Eu{sup 3+}-doped LnAlO{sub 3} (Ln = La, Gd) are in good agreement with our experimental results. -- Abstract: Eu{sup 3+}-doped trigonal LaAlO{sub 3} and orthorhombic GdAlO{sub 3} phosphors have been successfully synthesized by sol-gel method. The crystallization processes of the phosphors have been characterized by X-ray diffraction (XRD) and thermogravimetry-differential scanning calorimetry (TG-DSC). The optical properties of these phosphors were investigated using the photoluminescence (PL) and photoluminescence excitation (PLE) spectra. The influences of the different structures and bonding of the hosts on the luminescence performance of Eu{sup 3+} ion-doped LaAlO{sub 3} and GdAlO{sub 3} were investigated in detail based on chemical bond theory. Under appropriate UV-radiation, the reddish orange light emitted from GdAlO{sub 3}:Eu{sup 3+} was brighter than that from LaAlO{sub 3}:Eu{sup 3+}. Such a brightly luminescent phosphor could be considered as an ideal optical material for the development of new optical display systems.

36 MATERIALS SCIENCE↗

Electromagnetic and microwave-absorbing properties of magnetite decorated multiwalled carbon nanotubes prepared with poly(N-vinyl-2-pyrrolidone)

Graphical abstract: The Fe{sub 3}O{sub 4}/MWNTs hybrids prepared with PVP achieve a maximum reflection loss is -35.8 dB at 8.56 GHz, and the bandwidth below -10 dB is more than 2.32 GHz. More importantly, a new reflection loss peak occurs at the frequency of 14.6 GHz, which indicates that the Fe{sub 3}O{sub 4}/MWNTs hybrids have better absorption properties in the high-frequency range. Highlight: Black-Right-Pointing-Pointer The Fe{sub 3}O{sub 4} decorated MWNTs hybrids were prepared using PVP as dispersant. Black-Right-Pointing-Pointer Many more Fe{sub 3}O{sub 4} particles were attached homogeneously on the surface of MWNTs. Black-Right-Pointing-Pointer The Fe{sub 3}O{sub 4}/MWNTs hybrids achieve a maximum reflection loss of -35.8 dB at 8.56 GHz. Black-Right-Pointing-Pointer A new reflection loss peak occurs at the high-frequency of 14.6 GHz. -- Abstract: The magnetite (Fe{sub 3}O{sub 4}) decorated multiwalled carbon nanotubes (MWNTs) hybrids were prepared by an in situ chemical precipitation method using poly(N-vinyl-2-pyrrolidone) (PVP) as dispersant. The structure and morphology of hybrids are characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and transmission electron-microscopy (TEM). The TEM investigation shows that the Fe{sub 3}O{sub 4}/MWNTs hybrids exhibit less entangled structure and many more Fe{sub 3}O{sub 4} particles are attached homogeneously on the surface of MWNTs, which indicated that PVP can indeed help MWNTs to disperse in isolated form. The electromagnetic and absorbing properties were investigated in a frequency of 2-18 GHz. The results show that the Fe{sub 3}O{sub 4}/MWNTs hybrids exhibit a superparamagnetic behavior and possess a saturation magnetization of 22.9 emu/g. The maximum reflection loss is -35.8 dB at 8.56 GHz, and the bandwidth below -10 dB is more than 2.32 GHz. More importantly, a new reflection loss peak occurs at the frequency of 14.6 GHz, which indicates that the Fe{sub 3}O{sub 4}/MWNTs hybrids have better absorption properties in the high-frequency.

36 MATERIALS SCIENCE↗

Synthesis and photocatalytic activity of mesoporous cerium doped TiO{sub 2} as visible light sensitive photocatalyst

Graphical abstract: Cerium doped titania having optimum 5 wt% of cerium can decompose methylene blue and reduce selenium (IV) efficiently under visible light. Highlights: Black-Right-Pointing-Pointer Effect of cerium doping on the surface properties and visible light mediated photocatalytic reaction is studied. Black-Right-Pointing-Pointer Cerium doping increases the anatase phase stability, surface area (up to 137 m{sup 2}/g) and visible light absorption. Black-Right-Pointing-Pointer Importance of Ce{sup 3+}/Ce{sup 4+}, oxygen vacancy, surface area and crystallinity is correlated with improved catalytic activity. Black-Right-Pointing-Pointer Material with 5 wt% Ce is found to be most active photocatalyst for methylene blue decomposition and Se (IV) reduction. -- Abstract: Cerium doped titania materials were synthesized varying the cerium concentration from 0 to 10 wt%. Materials are characterised by XRD, TEM, XPS and N{sub 2} adsorption desorption method. Surface area and visible light absorption substantially increases and crystallite size decreases with the increasing cerium content. Cerium doping stabilizes the anatase phase and surface area even at 600 Degree-Sign C calcination. Photocatalytic activity towards methylene blue decomposition and selenium (IV) reduction is found to increase with the cerium content up to 5 wt% and then decreases. Materials calcined at 600 Degree-Sign C shows better activity than that calcined at 400 Degree-Sign C, even though surface area decreases. Anatase crystallinity mostly decides the photocatalytic activity rather than only surface area. It can be concluded that the optimum visible light absorption and oxygen vacancy with 5% cerium doping enhances the photocatalytic activity. In addition photocatalytic performance is found to depend on the presence of Ce{sup 4+}/Ce{sup 3+} rather than only visible light absorption.

36 MATERIALS SCIENCE↗

Synthesis and electrochemical performance of Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} (0 {<=} x {<=} 0.15) cathode materials for lithium-ion batteries

Graphical abstract: Cycle behavior of Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} cells (x = 0, 0.05, 0.10 and 0.15) obtained during cycling within the potential of 2.5-4.3 V. Highlights: Black-Right-Pointing-Pointer The spherical Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} were synthesized by coprecipitation method. Black-Right-Pointing-Pointer Excess lithium improved the electrochemical performance. Black-Right-Pointing-Pointer Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} showed the best electrochemical performance. Black-Right-Pointing-Pointer Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} had the lowest charge transfer resistance. -- Abstract: In this work, layered lithium-excess materials Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} (x = 0, 0.05, 0.10 and 0.15), of spherical morphology with primary nanoparticles assembled in secondary microspheres, were synthesized by a coprecipitation method. The effects of lithium content on the structure and electrochemical performance of these materials were evaluated by employing X-ray diffraction (XRD), inductive coupled plasma (ICP), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge tests. It is found that Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}}, i.e., Li[(Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}){sub 0.95}Li{sub 0.05}]O{sub 2} showed the best electrochemical performance due to the highly ordered layered structure, reduced cation mixing and the lowest charge transfer resistance. Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} delivered a discharge capacity of 145 mA h g{sup -1} at 125 mA g{sup -1} in the cut-off voltage of 2.5-4.3 V, and had a capacity retention of 100% after 50 cycles at room temperature.

36 MATERIALS SCIENCE↗

Rapid microwave synthesis of the iron arsenides NdFeAsO and NdFe{sub 0.9}Co{sub 0.1}AsO

Graphical abstract: For the first time, a rapid method for synthesizing NdFeAsO and NdFe{sub 0.9}Co{sub 0.1}AsO is reported. This method uses 2.45 GHz microwave radiation and an additional microwave susceptor to drive the reaction. The superconducting properties NdFe{sub 0.9}Co{sub 0.1}AsO of microwave synthesized materials match well with those reported previously. Highlights: Black-Right-Pointing-Pointer Microwave assisted solid state synthesis of NdFeAsO and NdFe{sub 0.9}Co{sub 0.1}AsO is reported. Black-Right-Pointing-Pointer Synthesis of high quality samples is achieved after 50 min microwave exposure. Black-Right-Pointing-Pointer Physical properties of microwave samples match those prepared conventionally. -- Abstract: The future of iron pnictide superconductors in technology is still undecided. While these materials are now known to possess relatively high critical temperatures and critical magnetic fields, processing methods for these superconductors are still in the development stage. Recently we have been investigating possible ways to speed up the synthetic process for obtaining polycrystalline iron arsenide superconductors and other transition metal pnictides. Here we report the synthesis of NdFeAsO and NdFe{sub 0.9}Co{sub 0.1}AsO in less than 1 h total exposure to microwave radiation using an additional microwave susceptor to surround the reaction ampoule. Structure and property measurements reveal the samples to be of high quality and superconducting when Co doped.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization and catalytic activity of acid-base bifunctional materials through protection of amino groups

Graphical abstract: Acid-base bifunctional mesoporous material SO{sub 3}H-SBA-15-NH{sub 2} was successfully synthesized under low acidic medium through protection of amino groups. Highlights: Black-Right-Pointing-Pointer The acid-base bifunctional material SO{sub 3}H-SBA-15-NH{sub 2} was successfully synthesized through protection of amino groups. Black-Right-Pointing-Pointer The obtained bifunctional material was tested for aldol condensation. Black-Right-Pointing-Pointer The SO{sub 3}H-SBA-15-NH{sub 2} catalyst containing amine and sulfonic acid groups exhibited excellent acid-basic properties. -- Abstract: Acid-base bifunctional mesoporous material SO{sub 3}H-SBA-15-NH{sub 2} was successfully synthesized under low acidic medium through protection of amino groups. X-ray diffraction (XRD), N{sub 2} adsorption-desorption, transmission electron micrographs (TEM), back titration, {sup 13}C magic-angle spinning (MAS) NMR and {sup 29}Si magic-angle spinning (MAS) NMR were employed to characterize the synthesized materials. The obtained bifunctional material was tested for aldol condensation reaction between acetone and 4-nitrobenzaldehyde. Compared with monofunctional catalysts of SO{sub 3}H-SBA-15 and SBA-15-NH{sub 2}, the bifunctional sample of SO{sub 3}H-SBA-15-NH{sub 2} containing amine and sulfonic acid groups exhibited excellent acid-basic properties, which make it possess high activity for the aldol condensation.

36 MATERIALS SCIENCE↗

Surfactant-assisted intercalation of high molecular weight poly(ethylene oxide) into vanadyl phosphate di-hydrate

Graphical abstract: CuK{sub {alpha}} X-ray diffraction patterns of the VOPO{sub 4}/PEO (A) e VOPO{sub 4}/CTA (B) and VOPO{sub 4}/CTA/PEO (C). Highlights: Black-Right-Pointing-Pointer VOPO{sub 4}/PEO has been synthesized by using CTAB, thereby improving PEO intercalation. Black-Right-Pointing-Pointer The d-spacing increase from 1.30 nm (VOPO{sub 4}/PEO) to 2.94 nm (VOPO{sub 4}/CTA/PEO). Black-Right-Pointing-Pointer This strategy was viable for intercalation of PEO with high molecular weight. -- Abstract: A high molecular weight poly(ethylene oxide)/layered vanadyl phosphate di-hydrate intercalation compound was synthesized via the surfactant-assisted approach. Results confirmed that surfactant molecules were replaced with the polymer, while the lamellar structure of the matrix was retained, and that the material presents high specific surface area. In addition, intercalation produced a more thermally stable polymer as evidenced by thermal analysis.

36 MATERIALS SCIENCE↗